PS:1 Wiki Dev - User contributions [en]

Alcohol and Substance Use Policy

2026-01-11T18:35:30Z

Aerishay: removed the word facilities

[[Category: Policy]]

Pumping Station: One, an Illinois not for profit corporation, with offices located at 3519 N Elston, Chicago, IL, 60618 (the “Organization” and its “Location”) is committed to providing a safe, healthy, and productive environment for its charitable, educational, and other tax-exempt activities.

Consistent with this commitment, this policy (“Policy”) establishes the Organization’s intent to maintain an environment that is drug free and tolerant of responsible usage of alcohol or other legal drugs. Every member is expected to be mindful that participating in any of the Organization’s activities -- including but not limited to using power tools, machinery, and equipment -- while under the influence of alcohol, drugs, and/or certain prescription medications is prohibited. Members under the influence of mind-altering substances can pose serious health and safety risks to themselves and others. PS:One restricts activities during and after the consumption of alcohol and other mind-altering substances, and specifically prohibits using power tools and machinery during and after consuming alcohol or any other substance that might impair judgement. Being under the influence of illegal drugs is prohibited. PS:One requires that those who choose to drink or use legal recreational drugs on site abide by state law and PS:One regulations, and expects that such individuals will conduct themselves responsibly, while being considerate and mindful of the rights of others.

ALL MEMBERS & GUESTS MUST BE AWARE AND UNDERSTAND THAT THE ORGANIZATION CONDUCTS ACTIVITIES (“ACTIVITIES”) THAT ARE INHERENTLY DANGEROUS AND THAT INVOLVE THE RISK OF SERIOUS INJURY, INCLUDING BUT NOT LIMITED TO DISMEMBERMENT, AND/OR DEATH AND/OR PROPERTY DAMAGE.

=Section 1. Prohibited Conduct=
In view of the above inherent risks associated with the Organization’s Activities, except as may
be expressly permitted in this Policy, the Organization absolutely prohibits the following
activities in conjunction with the following Organizational Activities:

The use, abuse, or being under the influence of alcohol, other drugs, prescription or otherwise, or any other substance that might impair the user’s judgement, while using the machinery, equipment, and tools of PS1 or while performing any other operation that could potentially be dangerous.
The possession, sale, purchase, transfer, or transit of any illegal or unauthorized drug,
including prescription medication that is not prescribed to the member or drug-related paraphernalia.
The illegal use or abuse of drugs, prescription or otherwise.

Nothing in this policy is meant to prohibit the appropriate use of over-the- counter medication or
other legally prescribed medications to the extent that it does not impair a member’s ability to operate equipment or jeopardize their safety or the safety of others.

Members should consider their medication use and refrain from potentially dangerous activities if they believe the medication will impair their safety or the safety of others.

=Section 2. Brewing Programs=
The Organization may sponsor programs at its Location in which Members participate in
beer brewing, beer tasting and alcohol related programs (“Beer Related Programs”).
This Policy does not prohibit the use or consumption of alcohol at such events. However, if
Participants choose to consume alcohol at such events, they must do so responsibly and maintain their obligation to conduct themselves appropriately at all times. Participants in Beer Related Programs continue to be subject to all terms and conditions of this Policy, and, in conjunction with other Organizational Activities, may not use, abuse, or be under the influence of illegal drugs, or other impairing substances.

For public events where beverages brewed at PS1 are served, a [https://www2.illinois.gov/ilcc/SiteCollectionDocuments/Homebrewer%20Special%20Event%20Permit.pdf Home Brewer’s Special Event license] must be obtained and a copy of the license must be provided to the Board no later than 4 days before the event.

=Section 3. Organization Sponsored Events=
Any alcohol at a Pumping Station: One sponsored event that is not owned by a specific member will be dispensed by an individual with a valid BASSET certification from behind the bar area, to be openly displayed in the bar area. Any individual serving alcohol will provide a copy of their BASSET certification to the Board no later than 4 days before the event. Alcohol purchased by Pumping Station: One for any party will not be left unattended. Member-owned alcohol may be brought into the space and consumed by an individual assuming it does not violate any of the other provisions in this document. Members wishing to be reimbursed for purchases of alcohol for an organizational event must obtain prior approval from the Board.

=Section 4. Compensation for alcohol=
Individuals may not sell alcohol at PS1. The sale of alcohol is only permitted at Pumping Station: One if the organization is sponsoring an event and obtains a [https://www.illinois.gov/ilcc/SiteCollectionDocuments/Special%20Event%20Retailer%20Liquor%20License%20NFP.pdf Special Event Retailer’s Liquor License] for the sale of alcohol at the event. All relevant copies of licensing should be displayed at the event with a copy sent to the Board no later than 4 days before the event. The beneficiary for any donations collected for alcohol must be explicitly denoted and all recipients must be specified on all money collection devices (digital or physical) used for collecting donations. Labeling must be affixed securely to donation method. Any unlabeled donation collection devices will be assumed to be the property of PS1 and absorbed into the discretionary funds of the budget. Donations for alcohol may only be collected in the Kitchen area; this includes any flyers or signage that directs people to online financial collection options.

=Section 5. Administration and Enforcement of this Policy=
Pumping Station: One expressly reserves the right to change, modify, or delete the provisions of this Policy without notice. The Board of Directors is responsible for the administration of this
Policy. Any single member of the Board of Directors may stop a member from using a tool, if they have reasonable cause to believe they are under the influence of drugs or alcohol. If you have any questions regarding this Policy or if you have questions about alcohol or
substance abuse that are not addressed in this Policy, please contact the Organization’s Board of Directors. A violation of any of this Policy is subject to disciplinary action, up to and including,
without warning, immediate termination of membership and/or a permanent ban on future
participation in the Organization’s activities. Any delay or failure by Pumping Station: One to enforce any work policy or rule will not constitute a waiver of Pumping Station: One’s right to do so in the future.

=Section 6.=
This policy constitutes the sole and entire policy of the Organization with respect to the subject matter contained herein.

Alcohol and Substance Use Policy

2026-01-07T03:59:01Z

Aerishay: added items per 1/6 board meeting clarifying who can intervene and adding the term recreational drugs

[[Category: Policy]]

Pumping Station: One, an Illinois not for profit corporation, with offices located at 3519 N Elston, Chicago, IL, 60618 (the “Organization” and its “Location”) is committed to providing a safe, healthy, and productive environment for its charitable, educational, and other tax-exempt activities.

Consistent with this commitment, this policy (“Policy”) establishes the Organization’s intent to maintain an environment that is drug free and tolerant of responsible usage of alcohol or other legal drugs. Every member is expected to be mindful that participating in any of the Organization’s activities -- including but not limited to using power tools, machinery, equipment, and facilities -- while under the influence of alcohol, drugs, and/or certain prescription medications is prohibited. Members under the influence of mind-altering substances can pose serious health and safety risks to themselves and others. PS:One restricts activities during and after the consumption of alcohol and other mind-altering substances, and specifically prohibits using power tools and machinery during and after consuming alcohol or any other substance that might impair judgement. Being under the influence of illegal drugs is prohibited. PS:One requires that those who choose to drink or use legal recreational drugs on site abide by state law and PS:One regulations, and expects that such individuals will conduct themselves responsibly, while being considerate and mindful of the rights of others.

ALL MEMBERS & GUESTS MUST BE AWARE AND UNDERSTAND THAT THE ORGANIZATION CONDUCTS ACTIVITIES (“ACTIVITIES”) THAT ARE INHERENTLY DANGEROUS AND THAT INVOLVE THE RISK OF SERIOUS INJURY, INCLUDING BUT NOT LIMITED TO DISMEMBERMENT, AND/OR DEATH AND/OR PROPERTY DAMAGE.

=Section 1. Prohibited Conduct=
In view of the above inherent risks associated with the Organization’s Activities, except as may
be expressly permitted in this Policy, the Organization absolutely prohibits the following
activities in conjunction with the following Organizational Activities:

The use, abuse, or being under the influence of alcohol, other drugs, prescription or otherwise, or any other substance that might impair the user’s judgement, while using the machinery, equipment, tools and facilities of PS1 or while performing any other operation that could potentially be dangerous.
The possession, sale, purchase, transfer, or transit of any illegal or unauthorized drug,
including prescription medication that is not prescribed to the member or drug-related paraphernalia.
The illegal use or abuse of drugs, prescription or otherwise.

Nothing in this policy is meant to prohibit the appropriate use of over-the- counter medication or
other legally prescribed medications to the extent that it does not impair a member’s ability to operate equipment or jeopardize their safety or the safety of others.

Members should consider their medication use and refrain from potentially dangerous activities if they believe the medication will impair their safety or the safety of others.

=Section 2. Brewing Programs=
The Organization may sponsor programs at its Location in which Members participate in
beer brewing, beer tasting and alcohol related programs (“Beer Related Programs”).
This Policy does not prohibit the use or consumption of alcohol at such events. However, if
Participants choose to consume alcohol at such events, they must do so responsibly and maintain their obligation to conduct themselves appropriately at all times. Participants in Beer Related Programs continue to be subject to all terms and conditions of this Policy, and, in conjunction with other Organizational Activities, may not use, abuse, or be under the influence of illegal drugs, or other impairing substances.

For public events where beverages brewed at PS1 are served, a [https://www2.illinois.gov/ilcc/SiteCollectionDocuments/Homebrewer%20Special%20Event%20Permit.pdf Home Brewer’s Special Event license] must be obtained and a copy of the license must be provided to the Board no later than 4 days before the event.

=Section 3. Organization Sponsored Events=
Any alcohol at a Pumping Station: One sponsored event that is not owned by a specific member will be dispensed by an individual with a valid BASSET certification from behind the bar area, to be openly displayed in the bar area. Any individual serving alcohol will provide a copy of their BASSET certification to the Board no later than 4 days before the event. Alcohol purchased by Pumping Station: One for any party will not be left unattended. Member-owned alcohol may be brought into the space and consumed by an individual assuming it does not violate any of the other provisions in this document. Members wishing to be reimbursed for purchases of alcohol for an organizational event must obtain prior approval from the Board.

=Section 4. Compensation for alcohol=
Individuals may not sell alcohol at PS1. The sale of alcohol is only permitted at Pumping Station: One if the organization is sponsoring an event and obtains a [https://www.illinois.gov/ilcc/SiteCollectionDocuments/Special%20Event%20Retailer%20Liquor%20License%20NFP.pdf Special Event Retailer’s Liquor License] for the sale of alcohol at the event. All relevant copies of licensing should be displayed at the event with a copy sent to the Board no later than 4 days before the event. The beneficiary for any donations collected for alcohol must be explicitly denoted and all recipients must be specified on all money collection devices (digital or physical) used for collecting donations. Labeling must be affixed securely to donation method. Any unlabeled donation collection devices will be assumed to be the property of PS1 and absorbed into the discretionary funds of the budget. Donations for alcohol may only be collected in the Kitchen area; this includes any flyers or signage that directs people to online financial collection options.

=Section 5. Administration and Enforcement of this Policy=
Pumping Station: One expressly reserves the right to change, modify, or delete the provisions of this Policy without notice. The Board of Directors is responsible for the administration of this
Policy. Any single member of the Board of Directors may stop a member from using a tool, if they have reasonable cause to believe they are under the influence of drugs or alcohol. If you have any questions regarding this Policy or if you have questions about alcohol or
substance abuse that are not addressed in this Policy, please contact the Organization’s Board of Directors. A violation of any of this Policy is subject to disciplinary action, up to and including,
without warning, immediate termination of membership and/or a permanent ban on future
participation in the Organization’s activities. Any delay or failure by Pumping Station: One to enforce any work policy or rule will not constitute a waiver of Pumping Station: One’s right to do so in the future.

=Section 6.=
This policy constitutes the sole and entire policy of the Organization with respect to the subject matter contained herein.

Board Meeting Notes 2025-01-14

2025-01-24T23:44:56Z

Aerishay: /* Financial Report */

{{Board Meeting Notes
| Previous YYYY-MM-DD=2025-01-07
| Next YYYY-MM-DD=2025-01-21
| YYYY=2025
}}

Meeting Start:

== Attendance ==
* Board Members
**Nick
**James
**Uwe
**Lindsay
**Eric
**Ian
**Donzell (arrived late)

== Agenda ==

* Consent Agenda
* Committee Reports
* Read mail
* Financial/membership report
* Review the PayPal and banking transactions
* Member leaving reason reports
* Check Freshdesk queue
* New business
* Old business

== Minutes ==

=== Discussion on previous minutes ===

=== Consent Agenda ===

=== Mail ===
*We got a letter from the IRS, we got our 501c(3) reinstated!

=== Committee Reports ===
*GenOps
**Nothing to report
*CTO
**Nothing to report
*Electronics Area Host
**WA bill is due in March, we need to pay it
**We are close to the contact limit, need to purge old contacts (they are backed up in Deep Harbor)
*Woodshop Area Host
**Sam Paris is going out of town for a month, out of contact for a week. Nick Hawley is Shadow Sam while he is gone.
**The fire door between the woodshop and the dock needs attention. We should investigate.
**We may seek a quote to repair or replace the door.
*

Reports from [[Committees]]

=== Financial Report ===
* '''Chase Checking: 51,178'''
* '''Chase Savings: 40,000'''
* '''PEX: 14,062'''
* '''PayPal: 6600'''
* '''Building Fund: 60,000'''

=== Membership Report ===

* '''Number of Members:'''
* '''Quorum:'''

=== Review the PayPal and banking transactions ===

=== Member Leaving Reason Reports ===

=== Freshdesk ===

Login link: https://pumpingstationone.freshdesk.com

=== New Business ===
*Ian brought a quote for $2600-2800 to inspect the building, including the roof.
**This is close to another $2500 quote we received
*Lindsay brought quotes for appraisal
**If we don't know how we are financing, we might have to pay twice. Bank financing would send their own appraiser, which we would pay for. Seller financing we would hire one of these quotes.
**Types of appraisal:
***Report is 200 pages, $2500-3000.
***BPO/Drive-by is 20 pages, $850. That's more for our understanding, than bank purposes.
***Eric says BPO is very cursory, more of a real estate thing.
*Kevin the attorney has a dead battery, and will not be joining us tonight.
*Carl says that in 2045 we could save $100k because that's when we will have the building paid off, by buying early. This does not really matter.
*Carl says that we have 3 votes that passed recently, which have allocated more money than we actually have.
**This is fine, because this money will be spent across the course of the year.
**This means that it is less appealing to consider closing on the building early.
*Eric thoughts on counteroffer:
**First page changes owner of record, NBD
**Second page needs addressed - we need to understand the commercial mortgage note section, if it entails fees. We want documentation on this loan.
**Closing date - are we staggering, pushing back a year?
***Eric's take - staggering is back pocket, best option is closing in 2026. Respond with what we want!
**Tax credit section seems to be fine, he is asking us to pay the adjusted rate that we would have paid anyway - it's due to the way that property taxes are due a year later.
**Dan is asking us to pay closing costs, but we don't know how much that will be yet. We can ask him for an estimate.
**Do we have a security deposit? No one knows. If it exists, we get it back. It probably isn't much.
**Dan crossed out inspection and appraisal, so we just do those before closing. Either we wait to negotiate until they're done, or we do them first before returning to negotiation. Same goes for the Member Vote contingency.
*There was much back and forth about whether we should push Dan towards closing at the end of our lease, or closing early.
**After 30 minutes of discussion, the board decided unanimously to push towards closing at the end of our lease.
*Eric and Uwe discussed the difference between a trust deed and a warranty deed. Uwe is concerned, Eric is not.
*Andrew Wingate wants to have a signed contract by July.

=== Old Business ===

== Votes ==
*The PS:1 Board of Directors votes to grant W.I.L.D. volunteer status to Andrew Locke
**For:7
**Against:0
**Abstain:0
*The PS:1 Board of Directors votes to check the cameras to identify abuse of the Powermatic drum sander between 1/12 at 7pm and 1/14 at 7pm.
**For:7
**Against:0
**Abstain:0
*The PS:1 Board of Directors votes to grant W.I.L.D. volunteer status to V.
**For:7
**Against:0
**Abstain:0
*The PS:1 Board of Directors votes to spend up to $3,000 on an inspection, and up to $3,000 on an appraisal, totaling $6,000
**For:7
**Against:0
**Abstain:0

[[Category:Board_Meetings]]
[[Category:2025 Board Meetings]]

Vote To Create Building Fund

2025-01-24T23:42:25Z

Aerishay: /* History */

==Sponsors==
* Andrew Wingate
* Jennie Plasterer
*Lyn Cole
*CrazyUncleDave

==History==
* Mailing List Announcement: 8-27-24
* Officially Proposed: 9/3/24
* Voting Closed: 9/10/25 (Result: Yes)

==Background==

We have 18 months remaining on our lease. Our landlord is not interested in renewing it. He has offered us the opportunity to purchase. The asking price is $1.3 million. Negotiations are ongoing.

We believe purchasing the building is the best option to continue PS1's existence. The landlord is generously willing to owner finance the building for a period of 3 years, with a down payment of 20% ($260k).

Our goal is to raise $300k for down payment and related expenses. Realizing this objective will require dedication and mindfulness. Our current financial trajectory will not accomplish this goal; change is necessary.
*Member dues will need to be raised.
*Member votes will need to be considered carefully.
*Extraneous spending in areas will need to be reduced.

We propose authorizing the Treasury Team to direct $15k a month to a Building Fund designed to position us for building purchase, moving expenses, or whatever other solution we can devise in the coming months.
==Language==

The membership authorizes the Treasury Team create and direct $15K a month into the Building Fund. The Building Fund is designed be spent on building purchases and building-related expenses. A vote of the membership or board of directors can undo this.

[[Category:Votes]]

[[Category:2024 Votes]]

Member Storage Registry

2025-01-04T18:35:02Z

Aerishay: added a claimed shelf

== ‘’’Procedure May 2024’’’ ==

To Aquire a Shelf or Locker

* Contact info@pumpingstationone.org with your desired locker location to have your membership upgraded to “Member with Storage”. The upgrade will be visible in your Wild Apricot membership portal. A storage locker is an additional $30 monthly.
* Once assigned a locker, write your full name, or the email address attached to your membership account, LEGIBLY on a piece of tape and stick it to your locker.

You should use the same name or email address here that you have listed on [https://membership.pumpingstationone.org the members site] so that we can verify your membership status. This will help you avoid your storage space getting ticketed and you having to do something about it later.

== Catwalk Shelf Registry ==

''' -Alpha Alpha designations refer to mini shelves used for PS1 official projects '''

The catwalk is where some of our [[member leased server Systems]] infrastructure are located. Additionally, member shelves are on the catwalk.

'''Please do not store items on the catwalk, except on member shelves. Loose items will be ticketed'''

On the catwalk, numbering starts with the upper left shelf and goes down, then across.
{| class="wikitable"
| C A ||
|-
| C B ||
|-
| C C || Andrew Morris
|-
| C D ||
|-
| C E ||
|-
| C F ||
|-
| C G ||
|-
| C H ||
|-
| C I ||
|-
| C J ||
|-
| C K ||
|-
| C01 || Ron Olson
|-
| C02 || Jennie Plasterer
|-
| C03 || Nick Hawley
|-
| C04 || Josh Martin
|-
| C05 || Sam Paris
|-
| C06 || Justin 'Books' Corbin
|-
| C07 ||
|-
| C08 || Mike Bakula
|-
| C09 || Darlynn Cole
|-
| C10 || Aushra Abouzeid
|-
| C11 || Riley Pierce
|-
| C12 || Babafemi Ekundayo
|-
| C13 || Sam Vuchetich
|-
| C14 || Dan Morgan-Russell
|-
| C15 || Karen Stevens
|-
| C16 || Bradley Hovanec
|-
| C17 || Diego begin
|-
| C18 || Andrew Jackson
|-
| C19 || Philip Nolan
|-
| C20 || Jordan Kessel
|-
| C21 || Patrick Stycos
|-
| C22 || Louis Sullivan
|-
| C23 || Samuel Sion
|-
| C24 || Jonathan Bisson
|-
| C25 || Dan Wells
|-
| C26 || Sky Nova
|-
| C27 || Cameron Mastoras
|-
| C28 || Dan Locks
|-
| C29 || John Jegerski
|-
| C30 || Sean Blum
|-
| C31 || Jacob Dawson
|-
| C32 || David Fell
|-
| C33 || Elizabeth Koprucki
|-
| C34 || Mike Gucciard
|-
| C35 ||
|-
| C36 || Sam Abrahamson
|-
| C37 || Cameron Mastoras
|-
| C38 || Uwe grosse
|-
| C39 || Eugene Kharitonov
|-
| C40 || Hef
|-
| C41 || Tim Bielawa
|-
| C42 || Osi Van Dessel
|-
| C43 ||
|-
| C44 || Sean Kivlehan
|-
| C45 || Carlos Aranibar
|-
| C46 || Lydia Miller
|-
| C47 || Adam Molski
|-
| C48 || Jamin Nollsch
|-
| C49 || Joe Mertz
|-
| C50 || Charles Barker
|-
| C51 || Ben Stagl
|-
| C52 || Brian Barnt
|-
| C53 || Davis Sayer Cox
|-
| C54 ||
|-
| C55 || Jacob Waller
|-
| C56 || Dave Solomon
|-
| C57 || Daniel Baltudis
|-
| C58 || Carl Karsten
|-
| C59 || Brian Chojnowski
|-
| C60 || Francesco Nardulli

|-
| C61 || Shauen P. of 3DSpecialty

|-
| C62 || Nathaniel Knize
|-
| C63 || Zlatan Klebic
|-
| C64 ||

|-
| C65 || Nicholas Terrell

|-
| C66 || Eddie Muela
|}

== Locker Registry ==

The beige lockers between the general work area and the [[:Category:Cold_Metals|Cold Metals area]]

{| class="wikitable"
| GL 01 || Eric Beauchamp
|-
| GL 02 ||
|-
| GL 03 || Maria Savrasova
|-
| GL 04 || Micah Kephart
|-
| GL 05 || Joshua Samos
|-
| GL 06 || George Hoffman
|-
| GL 07 || Andrew E.H.
|-
| GL 08 || Abel Mebratu
|-
| GL 09 || Erica Canavan
|-
| GL 10 ||
|-
| GL 11 ||
|-
| GL 12 || Chris Hartman
|-
| GL 13 || Michael Sprinker
|-
| GL 14 ||
|-
| GL 15 || Avery
|-
| GL 16 ||
|-
| GL 17 || Franklin Walton
|-
| GL 18 || Greg Ybos
|-
| GL 19 || Mark Nielsen
|-
| GL 20 || Carter Robinson
|-
| GL 21 ||
|-
| GL 22 || Bruno Cardoso
|-
| GL 23 || Anthony Lighthall
|-
| GL 24 ||
|-
| GL 25 || Harrison K
|-
| GL 26 || Andrew Eubanks
|-
| GL 27 || Brian Desmond
|-
| GL 28 || Atticus Lazenby
|-
| GL 29 ||
|-
| GL 30 || Andrew Masek
|-
| GL 31 ||
|-
| GL 32 ||
|-
| GL 33 ||
|-
| GL 34 ||
|-
| GL 35 ||
|-
| GL 36 ||
|-
| GL 37 ||
|-
| GL 38 || Batuhan Dortcelik
|-
| GL 39 || Sam Rose

|-
| GL 40 ||
|-
| GL 41 ||
|-
| GL 42 ||

|}

[[Category:Registry]]

Vote to Create More Storage

2024-12-04T07:07:18Z

Aerishay: dates

[[File:Screenshot 2024-12-04 003427.png|thumb|sheet goods]]

==Sponsors==
*Andrew Wingate
*[[File:Floorplan.png|thumb|proposed floorplan]]Jennie Plasterer
==History==
*Mailing List Announcement: 12-4-24
*Language Locked:
*To be Voted on:
==Background==
We are rapidly running out of member storage. This plan will correct this in addition to solving several current problems.

* Lockers furniture
* Space annexing
* New pallet racks (2) in never neverland
* Sheet good storage
* Paint Drying Facilities
[[File:Screenshot 2024-12-04 003149.png|thumb|Lockers render]]
Storage space will be expanded to roughly 100 spaces.

* Roughly 100 lockers (currently there are 30 lockers capacity)
* Owners will be able to make their lockers closed off if desired
* All lockers will have drawer slides with 100lb capacity
* Larger spaces than current lockers and larger than catwalk lockers

If filled this would bring in $3,000 per month ($36k/yr)

This would cost approximately $10,000 dollars.
{| class="wikitable"
|+Expected Expenditures
|
|cost per drawer
|ext drawer
|set cost
|ext set
|-
|drawer slides
|10
|250
|250
|$1,000.00
|-
|drawer wood
|20
|500
|500
|$2,000.00
|-
|elctronics
|15
|375
|375
|$1,500.00
|-
|set wood
|
|0
|300
|$1,200.00
|-
|set metal
|
|0
|300
|$1,200.00
|-
|electronics
|
|0
|200
|$800.00
|-
|pallet racks
|
|
|
|$2300.00
|-
|
|
|
|
|$10,000
|}

==References==
*Currently there are 66 storage spaces on the catwalk
*Currently there are 30 lockers in general
*We have over 700 members; currently 90 people have claim to storage
==Language==
Authorize up to $10,000 dollars to be spent on additional storage solutions, to be spent before April 1, 2025.

Vote to Create More Storage

2024-12-04T06:23:02Z

Aerishay: exists

==Sponsors==
*Andrew Wingate
*Jennie Plasterer
==History==
*Mailing List Announcement:
*Officially Proposed:
*To be Voted on:
==Background==
We are rapidly running out of member storage. This plan will correct this in addition to solving several current problems.

* Lockers furniture
* Space annexing
* New pallet racks (2) in never neverland
* Sheet good storage
* Paint Drying Facilities

Storage space will be expanded to roughly 100 spaces.

* Roughly 100 lockers (currently there are 30 lockers capacity)
* All lockers will have drawer slides with 100lb capacity
* Larger spaces than current lockers and larger than catwalk lockers

If filled this would bring in $3,000 per month ($36k/yr)

This would cost approximately $10,000 dollars.

==References==
*Currently there are ____ storage spaces on the catwalk
*Currently there are 30 lockers in general
*We have over 700 members; currently 90 people have claim to storage
==Language==
Authorize up to $10,000 dollars to be spent on additional storage solutions, to be spent before April 1, 2025.

Vote To Create Building Fund

2024-08-28T03:06:37Z

Aerishay:

Sponsors
*Andrew Wingate
*Jennie Plasterer
*Lyn Cole
*CrazyUncleDave

<nowiki>[[Category:Votes]]</nowiki>

<nowiki>[[Category:2024 Votes]]</nowiki>

Vote To Create Building Fund

2024-08-28T03:06:04Z

Aerishay:

<nowiki>== Sponsors ==</nowiki>
*Andrew Wingate
*Jennie Plasterer
*Lyn Cole
*CrazyUncleDave

<nowiki>[[Category:Votes]]</nowiki>

<nowiki>[[Category:2024 Votes]]</nowiki>

Vote To Create Building Fund

2024-08-28T03:04:17Z

Aerishay: init

*Andrew Wingate
*Jennie Plasterer
*Lyn Cole
*CrazyUncleDave

<nowiki>[[Category:Votes]]</nowiki>

<nowiki>[[Category:2024 Votes]]</nowiki>

Reimbursement

2024-08-21T04:21:29Z

Aerishay:

== FAQ ==
* The Treasurer needs to know how you want to be paid - please say "Chase Quick Pay" as that is the easiest. other options are below.
* The Treasurer also needs to know what budget to apply this to.
* And The Treasurer needs help keeping track of things, so send a message to info@pumpingstationone.org so a ticket gets created and put in the Treasurer's queue.
* We need to be able to show the IRS pictures of receipts https://www.wisconsin.edu/travel/reimbursement/receipt-requirements
* And all this other stuff might be relevant too.

== Online Form ==

Latest and greatest process!
Fill out this form:

https://airtable.com/shraWp865MVDj3VHZ

You can ignore everything below here, much of it is out of date and no longer correct.

== Authorization ==
*Ongoing payments such as utilities
*One time payments
**From an area or administrative budget
**For a vote

== Ticket Generation ==
If you are a member and you want to be reimbursed for some money you spent:

* Make sure the relevant area host is ok with you spending that money. Preferably before you spend it. The area host has no obligation to approve reimbursement for something you decided to purchase without consulting them.

* Use form above. If you message any email address, freshdesk, etc. --- we will tell you to go through the online form above. Save us an additional email?

* If you are someone resolving tickets on freshdesk, and you see someone asking for a reimbursement, please send them a link to this page.

== Freshdesk procedure ==
*[[Treasurer Procedures]]

== Executing Payment ==
*Chase
*Paypal

== Accounting ==
*[[Treasurer Procedures]]

[[Category:Admin]]
[[Category:Board Procedures]]

Volunteer Positions

2024-06-15T14:04:58Z

Aerishay:

The Board of Directors has designated the following official Volunteer Positions. See [[Area Hosts and Volunteer Positions Policy]] for more information. See also [[:Category:Hosted Areas|Area Hosts]] for a list of Area Hosts.

= Volunteer Positions =

==== Responsibilities ====
*Each Volunteer's roles may vary. These volunteers serve to assist in the general maintenance of the space and community in conjunction with specific Area Hosts.

== Area Hosts ==
''Main article: [[Area Hosts]]''

=== 2D Printers ===
* Davis Sayer
** email: 2dprinting [at] pumpingstationone [dot] org
** slack handle: davissayer

=== 3D Printing ===
* Matt Keith - Hardware/Software Upgrades & Maintenance
** email: 3dprinting [at] pumpingstationone [dot] org
* Sam Donahue - Authorizations
** email: 3dprinting [at] pumpingstationone [dot] org
** slack handle: @Sam Donahue
** slack channels
***3d_layers

=== Specialty 3D Printing ===
* Books
**email: books@pumpingstationone.org

=== Arts & Crafts ===
* Lydia Miller
** email: arts [at] pumpingstationone [dot] org
** slack handle: @Lydia Miller

=== CNC Machining ===
* Adam Molski
** email: cnc [at] pumpingstationone [dot] org
** slack handle: @DocWomp
** slack channels
***fusion-360
***cad-cam
***cnc
***tormach_user_group

=== Cold Metals ===
* Jim Brink
** email: coldmetals@pumpingstationone.org
** email: 2010jfb[at] gmail [dot] com
** slack handle: @Jim Brink
** slack channels
***coldmetals

=== Electronics ===
* Andrew Wingate
** email: electronics@pumpingstationone [dot]
** slack handle: @Andrew Wingate
** slack channels
***electronics

=== Gen Ops ===
* Andrew Morris
** email: GenOps [at] pumpingstationone [dot] org
** slack handle: @morrand

=== Hot Metals ===
* Ron Olson
** email: hotmetals [at] pumpingstationone [dot] org
** slack handle: @tackoknight
** slack channels
***hotmetalshop

=== Kitchen ===
* John Jegersky
** email: kitchen [at] pumpingstationone [dot] org
** slack handle:
**slack channels
***kitchen

=== Lasers ===
* Jordan Kessel
** email: lasers [at] pumpingstationone [dot] org
** slack handle: @Jordan
** slack channels
***lasers

=== Small Metals ===
* Osi Van Dessel
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @
** slack channels
***small-metals

=== Woodshop ===
* Sam Paris
** email: woodshop [at] pumpingstationone [dot] org
** slack handle: @Sam Paris
** slack channels
***woodshop

=== Events Coordinator ===
* Contact: [[user:lyn|Lyn Cole]]
** email: parties {at} pumpingstationone [dot] org
** slack handle: @LynPurple

== Authorizers ==
''Main article: [[Volunteer Authorizer]]''

Getting authorized on tools can be tough. Sometimes it's hard for new members to figure out how to get authorized, sometimes classes fill up in hours, sometimes classes aren't scheduled regularly. We want to fix that. The Board has created the following Volunteer Positions. We need a few members to step up and offer their time to get people authorized.

==== Responsibilities and Incentives ====

* Another page with a description of volunteer authorizer positions is here https://wiki.pumpingstationone.org/Volunteer_Authorizer

=== CNC Authorizer ===
* Shopbot: David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David
* Tormach: Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* Boss Laser: Jeff Zelnio
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Jeffz
**

=== Hot Metals Authorizers ===
* Aaron Feigen
**email: aaronfeigen [at] gmail [dot] com
** slack handle: @nibbtastic
* Jacob Dawson
**email: ps1@jmdawson [dot] net
** slack handle: @Jacob M. Dawson
* Sean Blum
**email: arthifflaw [at] gmail [dot] com
** slack handle: @Sean Blum

=== Cold Metals Authorizers ===
==== Basic Authorization: Tier 1 ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== LeBlond Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Clausing Lathe ====
* Anna Yu
** email: annotatehere [at] gmail [dot] com

==== Bridgeport Knee Mill ====

==== Grizzly Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== Surface Grinder ====

* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Baldor Tool Grinder ====

* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel

==== English Wheel ====
* Sam Abrahamson
** email: sammyabe6 [at] gmail [dot] com
** slack handle: @Sammy Abe

=== Small Metals Authorizer ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally

=== Tormach Authorizers ===
* Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David

=== Woodshop Authorizers and maintenance. ===

* Joseph Staffa
** Slack handle : @joseph Staffa

* Ian Sampson -general Auth, maintenance, wiki, Canvas courses

* Brenda Caflin -General Auth , maint,

* Jim Leonardson - small tool maintenance

* dan Ennion - general Auth, maintenance.

* Dan Walsh - gen auth, maintenance

* Brendan Twaddell - gen auth, maintenance

* Donzell Gordon - Woodshop Lathe Only
** email: donzellphoto [at] gmail [dot] com
** slack handle: @Donzell007

*Glen Peterson - Lathe only

*David Earl
** slack handle @david earl

*Gary Newhouse - ON NED LEAVE- shop storage, wiki, Canvas course manager
**slack handle @garynhouse

* Ralph Brendler - General auth, mortise and tenon jigs, and multi-router
** email: rebrendler [at] gmail [dot] com
** slack handle: @Ralph Brendler

* Sam Paris. Host

* Michelle deLeon. Authorizer,

=== Kitchen Authorizers ===

* Ryan Pierce - [[Java Master 2002 Coffee Roaster]]
** email: rdpierce [at] pobox [dot] com
** slack handle: @Ryan Pierce

=== Membership Management Team (MMT) ===
* Team Lead: Vacant
** email: mmt [at] pumpingstationone [dot] org
** slack handle:
* Scholarship Liason: Vadim
** email: scholarships [at] pumpingstationone [dot] org
** slack handle: @V
* Member: Scott Yoder
** email: mmt [at] pumpingstationone [dot] org
** slack handle: @Scott yoder

=== General Operations (GenOps) ===

All are generalists but each has a primary responsibility.

* Team Lead: Andrew Morris
** email: genops [at] pumpingstationone [dot] org
** slack handle: @morrand
* Woodshop Storage Manager: Gary Newhouse
** email: genops [at] pumpingstationone [dot] org
** slack handle: @GARYn
* other areas storage manager : Sean Blum
** email: genops [at] pumpingstationone [dot] org
** slack handle: @Sean Blum
*operations Liason: Brian Desmond
** slack handle: @Brian D
* operations advisor: Brian Barnt
** slack handle: @Bbarnt

== Board-Appointed Officers ==

=== Chief Technology Officer ===
* Name: Sky Nova
** email: cto@pumpingstationone [dot] org
** slack handle: @Sky

=== Education Officer ===
* Name: currently vacant

=== Communications/PR ===
* Name: Joseph Shaul
** email: press [at] pumpingstationone [dot] org pr@pumpingstationone [dot] org
** slack handle:

=== Treasurer ===
* Name: Carl Karsten
** email: treasurer [at] pumpingstationone [dot] org

== Board of Directors ==
* President: James Lamken
* Vice President: Vadim Hudolozhkin
* Secretary: Joe Mertz
* Director-at-Large: Peter Zieba
* Director-at-Large: Donzell Gordon
* Director-at-Large: Eric Beauchamp
* Director-at-Large: to be updated
* Director-at-Large: to be updated

Member Storage Registry

2024-06-12T03:24:00Z

Aerishay:

== ‘’’Procedure May 2024’’’ ==

To Aquire a Shelf or Locker

* Upgrade your membership to “Member with Storage” through the membership portal (ask for assistance from [[Mailto:info@pumpingstationone.org|info@pumpingstationone.org]] if needed). It is an additional $30 monthly

* Find a locker or shelf that you would like to rent, confirm that it is unclaimed by checking that it is A. empty B. no name on the wiki C. no name on the locker
* Update the Member Storage Registry page (this page!) to include your name corresponding to the space that you would like to have.
* Write your full name, or the email address attached to your membership account, LEGIBLY on a piece of tape and stick it to your locker

You should use the same name or email address here that you have listed on [https://membership.pumpingstationone.org the members site] so that we can verify your membership status. This will help you avoid your storage space getting ticketed and you having to do something about it later.

== Catwalk Shelf Registry ==

''' -Alpha Alpha designations refer to mini shelves used for PS1 official projects '''

The catwalk is where some of our [[member leased server Systems]] infrastructure are located. Additionally, member shelves are on the catwalk.

'''Please do not store items on the catwalk, except on member shelves. Loose items will be ticketed'''

On the catwalk, numbering starts with the upper left shelf and goes down, then across.
{| class="wikitable"
| C A ||
|-
| C B ||
|-
| C C || Andrew Morris
|-
| C D ||
|-
| C E ||
|-
| C F ||
|-
| C G ||
|-
| C H ||
|-
| C I ||
|-
| C J ||
|-
| C K ||
|-
| C01 || Ron Olson
|-
| C02 || Jennie Plasterer BOARD
|-
| C03 || Mark V
|-
| C04 || Cullen Humphries
|-
| C05 || Sam Paris
|-
| C06 || special 3D host. Justin Books Corbin
|-
| C07 || Dubi Kaufmann
|-
| C08 || Mike Bakula
|-
| C09 || Darlynn Cole
|-
| C10 || Aushra Abouzeid
|-
| C11 || Ryan Pierce
|-
| C12 || Babafemi Ekundayo
|-
| C13 || Sam Vuchetich
|-
| C14 || Glen Peterson
|-
| C15 || Ananda Stevens
|-
| C16 || Bradley Hovanec
|-
| C17 || Diego begin
|-
| C18 || Andrew Jackson
|-
| C19 || Philip Nolan
|-
| C20 || Jordan Kessel (Lasers host)
|-
| C21 || Patrick Stycos
|-
| C22 || Avery Sturzl
|-
| C23 || Samuel Sion
|-
| C24 || Parker Watson
|-
| C25 || Rob Riggs (Colorado Rob)
|-
| C26 || Sky Nova
|-
| C27 || Mal Washington
|-
| C28 || Dan Locks
|-
| C29 || John Jegerski (Kitchen area host)
|-
| C30 || Sean Blum
|-
| C31 || Jacob Dawson
|-
| C32 || David Fell
|-
| C33 || Elizabeth Koprucki
|-
| C34 || Mike Gucciard
|-
| C35 || Eric O’Hara NEEDS TO VACATE by 1-14-2023
|-
| C36 || Sam Abrahamson
|-
| C37 || Abel Greenwald
|-
| C38 || Uwe grosse
|-
| C39 || Giovanni Suarez Chirre
|-
| C40 || Hef
|-
| C41 || Tim Bielawa BOARD
|-
| C42 || Osi Van Dessel
|-
| C43 || Dan Wells
|-
| C44 || Sean Kivlehan
|-
| C45 || Eric Stein
|-
| C46 || Lydia Miller
|-
| C47 || Adam molski. Cnc host
|-
| C48 || Jamin Nollsch
|-
| C49 || Joe Mertz BOARD
|-
| C50 || Charles Barker
|-
| C51 || Ben Stagl
|-
| C52 || Brian Barnt
|-
| C53 || Davis Sayer Cox -2D print host
|-
| C54 || Ally Reza
|-
| C55 || Jacob Waller
|-
| C56 || Crazy Uncle Dave
|-
| C57 || Daniel Baltudis
|-
| C58 || Carl Karsten BOARD
|-
| C59 || Brian Chojnowski
|-
| C60 || Alicia Johnson PR HOST

|-
| C61 || Fidel Galano BOARD

|-
| C62 || Nathaniel knize
|-
| C63 || Zlatan Klebic
|-
| C64 || joseph kardia

|-
| C65 || Nicholas Terrell

|-
| C66 || Eddie Muela
|}

== Locker Registry ==

The beige lockers between the general work area and the [[:Category:Cold_Metals|Cold Metals area]]

{| class="wikitable"
| GL 01 ||
|-
| GL 02 ||
|-
| GL 03 ||
|-
| GL 04 ||
|-
| GL 05 ||
|-
| GL 06 ||
|-
| GL 07 ||
|-
| GL 08 ||
|-
| GL 09 ||
|-
| GL 10 ||
|-
| GL 11 || Eric Beauchamp
|-
| GL 12 || Abel Mebratu
|-
| GL 13 ||
|-
| GL 14 ||
|-
| GL 15 ||
|-
| GL 16 || George Hoffman
|-
| GL 17 || Harry Spyceddragon
|-
| GL 18 || Brian Desmond will move when we need him to
|-
| GL 19 ||
|-
| GL 20 ||
|-
| GL 21 ||
|-
| GL 22 || Maria Savrasova
|-
| GL 23 ||
|-
| GL 24 || Avery Sturzi
|-
| GL 25 ||
|-
| GL 26 ||
|-
| GL 27 ||
|-
| GL 28 ||
|-
| GL 29 || Nemanja Simeunovic
|-
| GL 30 ||
|-
| GL 31 || Charles Barker
|-
| GL 32 ||
|-
| GL 33 || Dan Ennion
|-
| GL 34 || Anthony Lighthall
|-
| GL 35 ||
|-
| GL 36 || (there is no 36. its a mystical magical hole in the universe..
|-
| GL 37 ||
|-
| GL 38 || Batuhan Dortcelik
|-
| GL 39 || Nick Hawley

|-
| GL 40 ||
|-
| GL 41 ||
|-
| GL 42 ||

|}

[[Category:Registry]]

Member Storage Registry

2024-05-18T22:53:52Z

Aerishay: /* ‘’’UPDATED procedure June 2022’’’ */

== ‘’’Procedure May 2024’’’ ==

To Aquire a Shelf or Locker

* Upgrade your membership to “Member with Storage” through the membership portal (ask for assistance from [[Mailto:info@pumpingstationone.org|info@pumpingstationone.org]] if needed). It is an additional $30 monthly

* Find a locker or shelf that you would like to rent, confirm that it is unclaimed by checking that it is A. empty B. no name on the wiki C. no name on the locker
* Update the Member Storage Registry page (this page!) to include your name corresponding to the space that you would like to have.
* Write your full name, or the email address attached to your membership account, LEGIBLY on a piece of tape and stick it to your locker

You should use the same name or email address here that you have listed on [https://membership.pumpingstationone.org the members site] so that we can verify your membership status. This will help you avoid your storage space getting ticketed and you having to do something about it later.

== Catwalk Shelf Registry ==

''' -Alpha Alpha designations refer to mini shelves used for PS1 official projects '''

The catwalk is where some of our [[member leased server Systems]] infrastructure are located. Additionally, member shelves are on the catwalk.

'''Please do not store items on the catwalk, except on member shelves. Loose items will be ticketed'''

On the catwalk, numbering starts with the upper left shelf and goes down, then across.
{| class="wikitable"
| C A ||
|-
| C B ||
|-
| C C || Andrew Morris
|-
| C D ||
|-
| C E ||
|-
| C F ||
|-
| C G ||
|-
| C H ||
|-
| C I ||
|-
| C J ||
|-
| C K ||
|-
| C01 || Ron Olson
|-
| C02 || Jennie Plasterer BOARD
|-
| C03 || Mark V
|-
| C04 || Cullen Humphries
|-
| C05 || Sam Paris
|-
| C06 || special 3D host. Justin Books Corbin
|-
| C07 || Dubi Kaufmann
|-
| C08 || Mike Bakula
|-
| C09 || Darlynn Cole
|-
| C10 || Aushra Abouzeid
|-
| C11 || Ryan Pierce
|-
| C12 || Babafemi Ekundayo
|-
| C13 || Sam Vuchetich
|-
| C14 || Glen Peterson
|-
| C15 || Ananda Stevens
|-
| C16 || Bradley Hovanec
|-
| C17 || Diego begin
|-
| C18 || Andrew Jackson
|-
| C19 || Philip Nolan
|-
| C20 || Jordan Kessel (Lasers host)
|-
| C21 || Patrick Stycos
|-
| C22 || Ilya Deynega
|-
| C23 || Samuel Sion
|-
| C24 || Parker Watson
|-
| C25 || Rob Riggs (Colorado Rob)
|-
| C26 || Sky Nova
|-
| C27 || Mal Washington
|-
| C28 || Dan Locks
|-
| C29 || John Jegerski (Kitchen area host)
|-
| C30 || Sean Blum
|-
| C31 || Jacob Dawson
|-
| C32 || David Fell
|-
| C33 || Elizabeth Koprucki
|-
| C34 || Mike Gucciard
|-
| C35 || Eric O’Hara NEEDS TO VACATE by 1-14-2023
|-
| C36 || Sam Abrahamson
|-
| C37 || Abel Greenwald
|-
| C38 || Uwe grosse
|-
| C39 || Giovanni Suarez Chirre
|-
| C40 || Hef
|-
| C41 || Tim Bielawa BOARD
|-
| C42 || Osi Van Dessel
|-
| C43 || Dan Wells
|-
| C44 || Sean Kivlehan
|-
| C45 || Eric Stein
|-
| C46 || Lydia Miller
|-
| C47 || Adam molski. Cnc host
|-
| C48 || Jamin Nollsch
|-
| C49 || Joe Mertz BOARD
|-
| C50 || Charles Barker
|-
| C51 || Ben Stagl
|-
| C52 || Brian Barnt
|-
| C53 || Davis Sayer Cox -2D print host
|-
| C54 || Ally Reza
|-
| C55 || Jacob Waller
|-
| C56 || Crazy Uncle Dave
|-
| C57 || Daniel Baltudis
|-
| C58 || Carl Karsten BOARD
|-
| C59 || Brian Chojnowski
|-
| C60 || Alicia Johnson PR HOST

|-
| C61 || Fidel Galano BOARD

|-
| C62 || Nathaniel knize
|-
| C63 || Zlatan Klebic
|-
| C64 || joseph kardia

|-
| C65 || Nicholas Terrell

|-
| C66 || Eddie Muela
|}

== Locker Registry ==

The beige lockers between the general work area and the [[:Category:Cold_Metals|Cold Metals area]]

{| class="wikitable"
| GL 01 ||
|-
| GL 02 ||
|-
| GL 03 ||
|-
| GL 04 ||
|-
| GL 05 ||
|-
| GL 06 ||
|-
| GL 07 ||
|-
| GL 08 ||
|-
| GL 09 ||
|-
| GL 10 ||
|-
| GL 11 || Eric Beauchamp
|-
| GL 12 || Abel Mebratu
|-
| GL 13 ||
|-
| GL 14 ||
|-
| GL 15 ||
|-
| GL 16 || George Hoffman
|-
| GL 17 || Harry Spyceddragon
|-
| GL 18 || Brian Desmond will move when we need him to
|-
| GL 19 ||
|-
| GL 20 ||
|-
| GL 21 ||
|-
| GL 22 || Maria Savrasova
|-
| GL 23 ||
|-
| GL 24 || Avery Sturzi
|-
| GL 25 ||
|-
| GL 26 ||
|-
| GL 27 ||
|-
| GL 28 ||
|-
| GL 29 || Nemanja Simeunovic
|-
| GL 30 ||
|-
| GL 31 || Charles Barker
|-
| GL 32 ||
|-
| GL 33 || Dan Ennion
|-
| GL 34 || Anthony Lighthall
|-
| GL 35 ||
|-
| GL 36 || (there is no 36. its a mystical magical hole in the universe..
|-
| GL 37 ||
|-
| GL 38 || Batuhan Dortcelik
|-
| GL 39 || Nick Hawley

|-
| GL 40 ||
|-
| GL 41 ||
|-
| GL 42 ||

|}

[[Category:Registry]]

Member Storage Registry

2024-05-13T13:24:37Z

Aerishay:

== ‘’’UPDATED procedure June 2022’’’ ==
As of June 2022, the member management team will handle the assignment of spaces. Same process overall, but MMT [https://wiki.pumpingstationone.org/Volunteer_Positions#Membership_Management_Team_.28MMT.29]will be your front end process. The General operations Team [https://wiki.pumpingstationone.org/Volunteer_Positions#Membership_Management_Team_.28MMT.29]will continue to monitor the spaces and deal with moves, changes of status and the eventual evictions. MMT serves you, GOT gets to be Tidy Space manager. More in line with other operations.

So to get a space, contact the member management team. THEY WILL HELP YOU BY CHECKING BOTH THE PHYSICAL SHELVES AND THE STORAGE REGISTRY HERE. THEN ASSIGN YOU A SPACE AND UPDATE THE RECORD IN THE REGISTRY AND YOUR MEMBERSHIP PROFILE.

GOT will handle removals due to your conscious choice to reduce your $$ or abandonment, by comparing this Registry with an extract of the membership Db based on a keyword "storage" search.

We will do all edits to the registry and your profile (new spaces=MMT, separations/reductions=GOT). Gn.

Do not edit this page. If you need a new space, please contact the Member Management Team so that we can incorporate that change into the new accurate records.

If you find something on this page that seems inaccurate, Please contact the affected member or the General Ops Team . Please do not edit other members' entries.

You should use the same name here that you have listed on [https://membership.pumpingstationone.org the members site] so that we can verify your membership status. This will help you avoid your storage space getting ticketed and you having to do something about it later.'''

== Catwalk Shelf Registry ==

''' -Alpha Alpha designations refer to mini shelves used for PS1 official projects '''

The catwalk is where some of our [[member leased server Systems]] infrastructure are located. Additionally, member shelves are on the catwalk.

'''Please do not store items on the catwalk, except on member shelves. Loose items will be ticketed'''

On the catwalk, numbering starts with the upper left shelf and goes down, then across.
{| class="wikitable"
| C A ||
|-
| C B ||
|-
| C C || Andrew Morris
|-
| C D ||
|-
| C E ||
|-
| C F ||
|-
| C G ||
|-
| C H ||
|-
| C I ||
|-
| C J ||
|-
| C K ||
|-
| C01 || Ron Olson
|-
| C02 || Jennie Plasterer BOARD
|-
| C03 || Mark V
|-
| C04 || Cullen Humphries
|-
| C05 || Sam Paris
|-
| C06 || special 3D host. Justin Books Corbin
|-
| C07 || Dubi Kaufmann
|-
| C08 || Mike Bakula
|-
| C09 || Darlynn Cole
|-
| C10 || Aushra Abouzeid
|-
| C11 || Ryan Pierce
|-
| C12 || Babafemi Ekundayo
|-
| C13 || Sam Vuchetich
|-
| C14 || Glen Peterson
|-
| C15 || Ananda Stevens
|-
| C16 || Bradley Hovanec
|-
| C17 || Diego begin
|-
| C18 || Andrew Jackson
|-
| C19 || Philip Nolan
|-
| C20 || Jordan Kessel (Lasers host)
|-
| C21 || Patrick Stycos
|-
| C22 || Ilya Deynega
|-
| C23 || Samuel Sion
|-
| C24 || Parker Watson
|-
| C25 || Rob Riggs (Colorado Rob)
|-
| C26 || Sky Nova
|-
| C27 || Mal Washington
|-
| C28 || Dan Locks
|-
| C29 || John Jegerski (Kitchen area host)
|-
| C30 || Sean Blum
|-
| C31 || Jacob Dawson
|-
| C32 || David Fell
|-
| C33 || Elizabeth Koprucki
|-
| C34 || Mike Gucciard
|-
| C35 || Eric O’Hara NEEDS TO VACATE by 1-14-2023
|-
| C36 || Sam Abrahamson
|-
| C37 || Abel Greenwald
|-
| C38 || Uwe grosse
|-
| C39 || Giovanni Suarez Chirre
|-
| C40 || Hef
|-
| C41 || Tim Bielawa BOARD
|-
| C42 || Osi Van Dessel
|-
| C43 || Dan Wells
|-
| C44 || Sean Kivlehan
|-
| C45 || Eric Stein
|-
| C46 || Lydia Miller
|-
| C47 || Adam molski. Cnc host
|-
| C48 || Jamin Nollsch
|-
| C49 || Joe Mertz BOARD
|-
| C50 || Charles Barker
|-
| C51 || Ben Stagl
|-
| C52 || Brian Barnt
|-
| C53 || Davis Sayer Cox -2D print host
|-
| C54 || Ally Reza
|-
| C55 || Jacob Waller
|-
| C56 || Crazy Uncle Dave
|-
| C57 || Daniel Baltudis
|-
| C58 || Carl Karsten BOARD
|-
| C59 || Brian Chojnowski
|-
| C60 || Alicia Johnson PR HOST

|-
| C61 || Fidel Galano BOARD

|-
| C62 || Nathaniel knize
|-
| C63 || Zlatan Klebic
|-
| C64 || joseph kardia

|-
| C65 || Nicholas Terrell

|-
| C66 || Eddie Muela
|}

== Locker Registry ==

The beige lockers between the general work area and the [[:Category:Cold_Metals|Cold Metals area]]

{| class="wikitable"
| GL 01 ||
|-
| GL 02 ||
|-
| GL 03 ||
|-
| GL 04 ||
|-
| GL 05 ||
|-
| GL 06 ||
|-
| GL 07 ||
|-
| GL 08 ||
|-
| GL 09 ||
|-
| GL 10 ||
|-
| GL 11 || Eric Beauchamp
|-
| GL 12 || Abel Mebratu
|-
| GL 13 ||
|-
| GL 14 ||
|-
| GL 15 ||
|-
| GL 16 || George Hoffman
|-
| GL 17 || Harry Spyceddragon
|-
| GL 18 || Brian Desmond will move when we need him to
|-
| GL 19 ||
|-
| GL 20 ||
|-
| GL 21 ||
|-
| GL 22 || Maria Savrasova
|-
| GL 23 ||
|-
| GL 24 || Avery Sturzi
|-
| GL 25 ||
|-
| GL 26 ||
|-
| GL 27 ||
|-
| GL 28 ||
|-
| GL 29 || Nemanja Simeunovic
|-
| GL 30 ||
|-
| GL 31 || Charles Barker
|-
| GL 32 ||
|-
| GL 33 || Dan Ennion
|-
| GL 34 || Anthony Lighthall
|-
| GL 35 ||
|-
| GL 36 || (there is no 36. its a mystical magical hole in the universe..
|-
| GL 37 ||
|-
| GL 38 || Batuhan Dortcelik
|-
| GL 39 ||

|-
| GL 40 ||
|-
| GL 41 ||
|-
| GL 42 ||

|}

[[Category:Registry]]

Category:CNC

2024-04-21T03:40:14Z

Aerishay:

{{Infobox HostedArea
| image = Equipment-no-photo.jpg
| areaname = CNC
| hostedsince =
| location = All over
| toolcategory = [[:Category:CNC]]
| hostname =

Davis Cox [[#2D Printing]]
2dprinting at pumpingstationone.org
----
Sam Donohue (authorizations) and Matt Keith (hardware-software) [[#3D Printing]]
3dprinting at pumpingstationone.org
----
Jordan Kessel [[#Laser Cutter/Engravers]]
lasers at pumpingstationone.org
----
David Earl [[Shopbot_PRS_CNC_router]]
dlwearl at pumpingstationone.org
----
[[ShapeOko2 CNC Router]] and [[Tormach_1100_series_CNC_mill]]
cnc at pumpingstationone.org
----
Ron Olsen [[CNC Plasma Cutter]]
hotmetals@pumpingstationone.org
----
| hostemail =
|
}}

Computer Numeric Control: computerized tools for manufacturing and crafting.

== Rules ==

===Clean Up===
* Please allot time for your project to clean up after yourselves. Throw away scrap, and store usable materials in the file cabinet.
* Empty Laser Engraver catch trays.
* Please return all tools from where you found them.
* Empty the trash when it is full

===Conserving Energy===
* Turn off the exhaust after a project. Do not cycle the exhaust rapidly.
* Turn off the Lights and A/C at the end of the day.
* Turn off 3D printers when prints are done.

===Storage===
* There is absolutely no member storage in the CNC area. Please clean up all projects when you are done. Left over projects without any documentation will be thrown away.

== Safety ==

Lasers are known to cause fire. If you leave your laser unattended, anyone else SHOULD halt or cancel it immediately, no questions asked, no excuses. DO not pass go, do not collect $200, go to laser jail.
Lasers are more liable to cause fire if the material is too thick, has air pockets in it (like multi-layer cardboard)
Lasers can cause toxic fumes if they are used with unsafe materials. There's a page of safe and unsafe materials linked from each laser's wiki page, and that is covered in authorizations.
There is one halon fire extinguisher in the CNC room that is first choice for putting out fires associated with the laser cutters.
As long as the lids are closed, you do not need to wear additional protective eye wear to operate the lasers.
Don't mess with the safety interlocks that detect if the lid is closed.
Do not ever laser humans or animals.

== Tools Available ==

There is an automatically built list of CNC-tagged equipment at the bottom of this page. If a thing does not show up on the automatically populated list, please edit that equipment's wiki page to make it happen.

===2D Printing===
* [[Xerox_Workcentre_7855_Printer_/_Scanner_/_Copier]]
* [[HP DesignJet T520 Large Format Color Printer]]
* [[HP DesignJet 755CM Large Format Printer]] (no longer at the space)
* [[Brother_DCP-7065DN_Printer]]
* [[Vinyl_Cutter]]

===Fused Filament Fabrication===

* [[Prusa i3 MK3S A 3D Printer]] - There are three of these, and they're among the best 3D printers right now, since they have automatic bed-leveling technology. Direct drive printing, filament sensor.
* [[Prusa i3 MK2S A 3D Printer]] - There is one of these. Older version of MK3S (Not in service)
* [[Creality Ender 3 A 3D Printer]] - There are two of these. Manual bed leveling. Capable of excellent prints.

* [[MakerBot Replicator]] - Removed from the space? Gone? At the best it's offline, broken, not usable unless you like tinkering.
* Jellybox - New to PS1, broken at the moment (needs a hot-end repair) and skimpy wiki page https://wiki.pumpingstationone.org/Jellybox
* [[LulzBot 3D Printer|LulzBot AO-100 3D printer]] - Larger volume. Works. Regular extruder cannot do flexible filament. Flexistruder needs a firmware update to use, then you have to change the firmware back to use regular filament, which is lame but ... maybe that can be fixed/updated someday.
* [[Lulzbot Taz3|Lulzbot TAZ3 3D printer]]
* [[3dSystems CubePro|3dSystems CubeProTrio 3D printer]] - Usable, but has a weird history of using proprietary filament so then we hacked it so that it can use any old filament but ... read the CubePro wiki page, the backstory is needed if you intend to use it.

===StereoLithography Additive Manufacturing===
* [[FormLabs Form 1+ SLA 3D Printer]] - Stereolithography-type printer, resin-based. No longer active
* [[Formlabs Form 3 SLA Printer]] - Stereolithography-type printer, resin-based. Active machine

===3D Scanning===
* [[Cubify Sense 3d Scanner]] - Hacked to use non-proprietary filament but has never been quite as good since the hack.
* [[Matter and Form 3D Scanner]] - Mostly sucks. Count on it taking an hour to scan a medium sized thing, too. Really, really sucks.

===Laser Cutter/Engravers===
* [[Epilog 30w Mini 24 Laser Engraver]]
* [[BOSS LS-3655 150w Laser Engraver]]
* [[Universal PLS6.150D 150W Laser Engraver]]

===CNC Routers===
* [[ShapeOko2 CNC Router]]
* [[CNC Plasma Cutter]]
* [[Shopbot PRS CNC router]]

===CNC Mills===
* [[Tormach 1100 series CNC mill]]

===Misc Equipment===
* [[Vinyl Cutter]]
* [[Gingery Plastic Injection Machine]]

== Supplies ==

Supplies are generally not provided. There are some PS1-owned bits in the drawer for the ShopBot, but you may wish to purchase your own bits if you want to be confident that you'll have a good, sharp bit of the appropriate size for your project. If you break a shop-owned bit, please tell the area host and post a note to the wiki and Google group.

There is often some common-use filament available for the TAZ3, AO-100 or Replicator 3D printers, but you may also used your own if you want to be confident that you'll have enough high-quality filament for your project. Filament can be purchased at MicroCenter and other retailers for about $20 per spool. Filament can be purchased for the Cube printer for about $100 per cartridge.

All machines, including the vinyl cutter and large format printers, should have information about their consumables listed on their respective wiki page.

There is a donation box next to the Cube printer for filament; suggested donation for Cube filament is 30 cents per gram.

== Authorization ==

Authorization for the '''[[Shopbot_PRS_CNC_router]]''' will appear as a [https://www.meetup.com/Pumping-Station-One Meetup event], and on the [http://pumpingstationone.org/events/ PS1 event calendar].

Authorization for other equipment varies, the policy may be listed on the tool's own wiki page. Some authorization events may be listed as Meetup events, Signup.com events, on the PS1 event calendar (which is mirrored on the PS1 web site "Events" page) or may be announced on the PS1 Google Group (generally the private one, not the public one).

For authorization for the Laser Cutters, please email laser-auths@pumpingstationone.org.

To be able to log in on the lasers or ShopBot PCs you must have your member login account modified by a member who has admin privileges. Once you are authorized, you will use the same username and password you would use on any other PS1 computer.

[https://pumpingstationone.skedda.com/register?key=11373bf&payload=CfDJ8AhWcCKz7g1DjwN6myjap4cdIEdLCUN78whkwElLjg7vhdI_Fm7_PGyoWzpgWFi1yae6LzzqVdM8dC7bNqpUHlonT2HhMFbiBWr5rLkaT2cXgL-GZPhljdRVuCTgnUUd2g CNC TOOL SIGNUP PAGE]

[[Category:Hosted Areas]]
[[Category:Member Manual]]
[[Category:Equipment]]
[[Category:Projects]]
[[Category:Tutorials]]
[[Category:3D Printing]]

Budget Balance

2023-11-16T04:02:25Z

Aerishay:

== About ==

This page is to show the current list of area budgets and the remaining available balance.

'''This page is only an estimate.'''

If the number you see is incorrect, you must first look within yourself and ask, "did I send in my receipts on time." Because only APPROVED expenses are reflected here, and approved expenses require documentation.

Additionally, keep in mind '''all area hosts are expected to maintain their own budget, This includes tracking your spending.''' We will update this as we can, in order to help ya'll out. We are managing 20ish budgets and 30 cards, you are maintaining one. Please keep that in mind.

This page will persist through the years being the one and only page of budget truth and knowledge.

'''DO NOT''' create a different version of this page at the end of the budget year.

For additional questions regarding these balances, email treasurer {at} pumpingstationone.org.

=== Page Info ===

{| style="text-align: center; width: 20%;" class="wikitable"
! Budget Year
| 2023
|-
! Last Maintained
| 11/15/23
|}

== Current Data ==

{| class="wikitable sortable"
! Area
! Total Budget
! Spent Budget
! Card Status
! Last Updated
! Notes
|-
| CNC
| 5693
| 2,099.81
| Active
| 11/15/23
| Receipts need to be submitted
|-
| Lasers
| 5710
| 4,980.99
| Active
| 11/15/23
| None
|-
| 3D Printing
| 8115
| 5,459.65
| Active
| 11/15/23
| None
|-
| Specialty Printing
| 7460
| 1,822.74
| Active
| 11/15/23
| None
|-
| 2D Printing
| 3039
| 2,168.96
| Active
| 11/15/23
| None
|-
| Electronics
| 5096
| 2,368.13
| Active
| 11/15/23
| None
|-
| Graphic Arts and Textiles
| 5400
| 5,511.70
| Active
| 11/15/23
| None
|-
| Hot Metals
| 8250
| 4,927.97 (+ 512.52 that needs to be sent to James?)
| Active
| 11/15/23
| Reimbursement data needed to refund James
|-
| Kitchen
| 6000
| 2,395.94
| Active
| 11/15/23
| None
|-
| Cold Metals
| 5400
| 1,467.13
| Active
| 11/15/23
| None
|-
| Woodshop
| 15,350
| 11,681.21
| Active
| 11/15/23
| None
|-
| Small Metals
| 4300
| 463.10
| Ordered
| 10/18/22
| None
|-
| Public Relations
| 1700
| 98.94
| None
| 11/15/23
| None
|-
| CTO
| 13,569
| 13,321.79
| Active
| 11/15/23
| None
|-
| General Operations
| 38440
| 6,973.94 in regular expenses, 12,960.93 in trash, for total of 19,934.87 spent.
| Active
| 11/15/23
| None
|}

Budget Balance

2023-11-16T04:00:43Z

Aerishay:

== About ==

This page is to show the current list of area budgets and the remaining available balance.

'''This page is only an estimate.'''

If the number you see is incorrect, you must first look within yourself and ask, "did I send in my receipts on time." Because only APPROVED expenses are reflected here, and approved expenses require documentation.

Additionally, keep in mind '''all area hosts are expected to maintain their own budget, This includes tracking your spending.''' We will update this as we can, in order to help ya'll out. We are managing 20ish budgets and 30 cards, you are maintaining one. Please keep that in mind.

This page will persist through the years being the one and only page of budget truth and knowledge.

'''DO NOT''' create a different version of this page at the end of the budget year.

For additional questions regarding these balances, email treasurer {at} pumpingstationone.org.

=== Page Info ===

{| style="text-align: center; width: 20%;" class="wikitable"
! Budget Year
| 2023
|-
! Last Maintained
| 11/15/23
|}

== Current Data ==

{| class="wikitable sortable"
! Area
! Total Budget
! Spent Budget
! Card Status
! Last Updated
! Notes
|-
| CNC
| 5693
| 2,099.81
| Active
| 11/15/23
| Receipts need to be submitted
|-
| Lasers
| 5710
| 4,980.99
| Active
| 11/15/23
| None
|-
| 3D Printing
| 8115
| 5,459.65
| Active
| 11/15/23
| None
|-
| Specialty Printing
| 7460
| 1,822.74
| None
| 11/15/23
| None
|-
| 2D Printing
| 3039
| 2,168.96
| Ordered
| 11/15/23
| None
|-
| Electronics
| 5096
| 2,368.13
| Active
| 11/15/23
| None
|-
| Graphic Arts and Textiles
| 5400
| 5,511.70
| Active
| 11/15/23
| None
|-
| Hot Metals
| 8250
| 4,927.97 (+ 512.52 that needs to be sent to James?)
| Active
| 11/15/23
| Reimbursement data needed to refund James
|-
| Kitchen
| 6000
| 2,395.94
| Active
| 11/15/23
| None
|-
| Cold Metals
| 5400
| 1,467.13
| Active
| 11/15/23
| None
|-
| Woodshop
| 15,350
| 11,681.21
| Ordered
| 11/15/23
| None
|-
| Small Metals
| 4300
| 463.10
| Active
| 10/18/22
| None
|-
| Public Relations
| 1700
| 98.94
| Active
| 11/15/23
| None
|-
| CTO
| 13,569
| 13,321.79
| Active
| 11/15/23
| None
|-
| General Operations
| 38440
| 6,973.94 in regular expenses, 12,960.93 in trash, for total of 19,934.87 spent.
| Active
| 11/15/23
| None
|}

Volunteer Positions

2023-05-12T00:55:07Z

Aerishay:

The Board of Directors has designated the following official Volunteer Positions. See [[Area Hosts and Volunteer Positions Policy]] for more information. See also [[:Category:Hosted Areas|Area Hosts]] for a list of Area Hosts.

= Volunteer Positions =

==== Responsibilities ====
*Each Volunteer's roles may vary. These volunteers serve to assist in the general maintenance of the space and community in conjunction with specific Area Hosts.

== Area Hosts ==
''Main article: [[Area Hosts]]''

=== 2D Printers ===
* Davis Sayer
** email: 2dprinting [at] pumpingstationone [dot] org
** slack handle: davissayer

=== 3D Printing ===
* Matt Keith - Hardware/Software Upgrades & Maintenance
** email: 3dprinting [at] pumpingstationone [dot] org
* Sam Donahue - Authorizations
** email: 3dprinting [at] pumpingstationone [dot] org
** slack handle: @Sam Donahue
** slack channels
***3d_layers

=== Specialty 3D Printing ===
* Books
**email: books@pumpingstationone.org

=== Arts & Crafts ===
* Lydia Miller
** email: arts [at] pumpingstationone [dot] org
** slack handle: @Lydia Miller

=== CNC Machining ===
* Adam Molski
** email: cnc [at] pumpingstationone [dot] org
** slack handle: @DocWomp
** slack channels
***fusion-360
***cad-cam
***cnc
***tormach_user_group

=== Cold Metals ===
* Jim Brink
** email: coldmetals@pumpingstationone.org
** email: 2010jfb[at] gmail [dot] com
** slack handle: @Jim Brink
** slack channels
***coldmetals

=== Electronics ===
* Andrew Wingate
** email: electronics@pumpingstationone [dot]
** slack handle: @Anna Yu
** slack channels
***electronics

=== Gen Ops ===
* Andrew Morris
** email: GenOps [at] pumpingstationone [dot] org
** slack handle: @morrand

=== Hot Metals ===
* Ron Olson
** email: hotmetals [at] pumpingstationone [dot] org
** slack handle: @tackoknight
** slack channels
***hotmetalshop

=== Kitchen ===
* Vacant as of May 2023, to be filled by end of May 2023
** email: kitchen [at] pumpingstationone [dot] org (or info@pumpingstationone.org in the meantime until that role is filled)
** slack handle:
**slack channels
***kitchen

=== Lasers ===
* Jordan Kessel
** email: lasers [at] pumpingstationone [dot] org
** slack handle: @Jordan
** slack channels
***lasers

=== Small Metals ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally
** slack channels
***small-metals

=== Woodshop ===
* Sam Paris
** email: woodshop [at] pumpingstationone [dot] org
** slack handle: @Sam Paris
** slack channels
***woodshop

=== Events Coordinator ===
* Contact: [[user:lyn|Lyn Cole]]
** email: parties {at} pumpingstationone [dot] org
** slack handle: @LynPurple

== Authorizers ==
''Main article: [[Volunteer Authorizer]]''

Getting authorized on tools can be tough. Sometimes it's hard for new members to figure out how to get authorized, sometimes classes fill up in hours, sometimes classes aren't scheduled regularly. We want to fix that. The Board has created the following Volunteer Positions. We need a few members to step up and offer their time to get people authorized.

==== Responsibilities and Incentives ====

* Another page with a description of volunteer authorizer positions is here https://wiki.pumpingstationone.org/Volunteer_Authorizer

=== CNC Authorizer ===
* Shopbot: David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David
* Tormach: Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* Boss Laser: Jeff Zelnio
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Jeffz
* Universal Laser: Ash Jasani
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Ash
* Universal Laser: Esty Wexler
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Esty Wexler

=== Hot Metals Authorizers ===
* Daron Wooding
** email: daron.wooding [at] gmail [dot] com
* Aaron Feigen
**email: aaronfeigen [at] gmail [dot] com
** slack handle: @nibbtastic
* Jacob Dawson
**email: ps1@jmdawson [dot] net
** slack handle: @Jacob M. Dawson
* Sean Blum
**email: arthifflaw [at] gmail [dot] com
** slack handle: @Sean Blum

=== Cold Metals Authorizers ===
==== Basic Authorization: Tier 1 ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== LeBlond Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Clausing Lathe ====
* Anna Yu
** email: annotatehere [at] gmail [dot] com

==== Bridgeport Knee Mill ====

==== Grizzly Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== Surface Grinder ====

* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Baldor Tool Grinder ====

* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel

==== English Wheel ====
* Sam Abrahamson
** email: sammyabe6 [at] gmail [dot] com
** slack handle: @Sammy Abe

=== Small Metals Authorizer ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally

=== Tormach Authorizers ===
* Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David

=== Woodshop Authorizers and maintenance. ===
*Gary Newhouse - shop storage, wiki, Canvas course manager
** email Gnewhouse @ gmail dot com
**slack handle @garynhouse

* Ralph Brendler - General auth, mortise and tenon jigs, and multi-router
** email: rebrendler [at] gmail [dot] com
** slack handle: @Ralph Brendler

*David Earl
** slack handle @david earl

* Joseph Staffa
** Slack handle : @joseph Staffa

* Ian Sampson -general Auth, maintenance, wiki, Canvas courses

* Brenda Caflin -General Auth , maint,

* Jim Leonardson - small tool maintenance

* dan Ennion - general Auth, maintenance.

* Dan Walsh - gen auth, maintenance

* Brendan Twaddell - gen auth, maintenance

* Donzell Gordon - Woodshop Lathe Only
** email: donzellphoto [at] gmail [dot] com
** slack handle: @Donzell007

*Glen Peterson - Lathe only

* Sam Paris. Host

* Michelle deLeon. Authorizer,

=== Membership Management Team (MMT) ===
* Team Lead: Vacant
** email: mmt [at] pumpingstationone [dot] org
** slack handle:
* Scholarship Liason: Nathan Upchurch
** email: scholarships [at] pumpingstationone [dot] org
** slack handle: @Nathan U
* Member: Scott Yoder
** email: mmt [at] pumpingstationone [dot] org
** slack handle: @Scott yoder

=== General Operations (GenOps) ===

All are generalists but each has a primary responsibility.

* Team Lead: Andrew Morris
** email: genops [at] pumpingstationone [dot] org
** slack handle: @morrand
* Woodshop Storage Manager: Gary Newhouse
** email: genops [at] pumpingstationone [dot] org
** slack handle: @GARYn
* other areas storage manager : Sean Blum
** email: genops [at] pumpingstationone [dot] org
** slack handle: @Sean Blum
*operations Liason: Brian Desmond
** slack handle: @Brian D
* operations advisor: Brian Barnt
** slack handle: @Bbarnt

== Board-Appointed Officers ==

=== Chief Technology Officer ===
* Name: Sky Nova
** email: cto@pumpingstationone [dot] org
** slack handle: @Sky

=== Education Officer ===
* Name: currently vacant

=== Communications/PR ===
* Name: Alicia Johnson
** email: press [at] pumpingstationone [dot] org pr@pumpingstationone [dot] org
** slack handle:

=== Treasurer ===
* Name: Carl Karsten
** email: treasurer [at] pumpingstationone [dot] org

== Board of Directors ==
* President: James Lamken
* Vice President: Vadim Hudolozhkin
* Secretary: Joe Mertz
* Director-at-Large: Tim Bielawa
* Director-at-Large: Donzell Gordon
* Director-at-Large:Jennie Plasterer
* Director-at-Large: Fidel Galano
* Director-at-Large: Jesse Seay

Volunteer Positions

2023-05-12T00:51:01Z

Aerishay: /* CNC Machining */

The Board of Directors has designated the following official Volunteer Positions. See [[Area Hosts and Volunteer Positions Policy]] for more information. See also [[:Category:Hosted Areas|Area Hosts]] for a list of Area Hosts.

= Volunteer Positions =

==== Responsibilities ====
*Each Volunteer's roles may vary. These volunteers serve to assist in the general maintenance of the space and community in conjunction with specific Area Hosts.

== Area Hosts ==
''Main article: [[Area Hosts]]''

=== 2D Printers ===
* Davis Sayer
** email: 2dprinting [at] pumpingstationone [dot] org
** slack handle: davissayer

=== 3D Printing ===
* Matt Keith - Hardware/Software Upgrades & Maintenance
** email: 3dprinting [at] pumpingstationone [dot] org
* Sam Donahue - Authorizations
** email: 3dprinting [at] pumpingstationone [dot] org
** slack handle: @Sam Donahue
** slack channels
***3d_layers

=== Specialty 3D Printing ===
* Books
**email: books@pumpingstationone.org

=== Arts & Crafts ===
* Lydia Miller
** email: arts [at] pumpingstationone [dot] org
** slack handle: @Lydia Miller

=== CNC Machining ===
* Adam Molski
** email: cnc [at] pumpingstationone [dot] org
** slack handle: @DocWomp
** slack channels
***fusion-360
***cad-cam
***cnc
***tormach_user_group

=== Cold Metals ===
* Jim Brink
** email: coldmetals@pumpingstationone.org
** email: 2010jfb[at] gmail [dot] com
** slack handle: @Jim Brink
** slack channels
***coldmetals

=== Electronics ===
* Andrew Wingate
** email: electronics@pumpingstationone [dot]
** slack handle: @Anna Yu
** slack channels
***electronics

=== Gen Ops ===
* Andrew Morris
** email: GenOps [at] pumpingstationone [dot] org
** slack handle: @morrand

=== Hot Metals ===
* Ron Olson
** email: hotmetals [at] pumpingstationone [dot] org
** slack handle: @tackoknight
** slack channels
***hotmetalshop

=== Kitchen ===
* Vacant as of May 2023, to be filled by end of May 2023
** email: kitchen [at] pumpingstationone [dot] org (or info@pumpingstationone.org in the meantime until that role is filled)
** slack handle:
**slack channels
***kitchen

=== Lasers ===
* Jordan Kessel
** email: lasers [at] pumpingstationone [dot] org
** slack handle: @Jordan
** slack channels
***lasers

=== Small Metals ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally
** slack channels
***small-metals

=== Woodshop ===
* Sam Paris
** email: woodshop [at] pumpingstationone [dot] org
** slack handle: @Sam Paris
** slack channels
***woodshop

=== Events Coordinator ===
* Contact: [[user:lyn|Lyn Cole]]
** email: parties {at} pumpingstationone [dot] org
** slack handle: @LynPurple

== Authorizers ==
''Main article: [[Volunteer Authorizer]]''

Getting authorized on tools can be tough. Sometimes it's hard for new members to figure out how to get authorized, sometimes classes fill up in hours, sometimes classes aren't scheduled regularly. We want to fix that. The Board has created the following Volunteer Positions. We need a few members to step up and offer their time to get people authorized.

==== Responsibilities and Incentives ====

* Another page with a description of volunteer authorizer positions is here https://wiki.pumpingstationone.org/Volunteer_Authorizer

=== CNC Authorizer ===
* Shopbot: David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David
* Tormach: Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* Boss Laser: Jeff Zelnio
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Jeffz
* Boss Laser: Andrew Camardella
** email: laser-auths@pumpingstationone [dot] org
** slack handle: @rtystgeeke
* Universal Laser: Ash Jasani
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Ash
* Universal Laser: Esty Wexler
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Esty Wexler

=== Hot Metals Authorizers ===
* Daron Wooding
** email: daron.wooding [at] gmail [dot] com
* Aaron Feigen
**email: aaronfeigen [at] gmail [dot] com
** slack handle: @nibbtastic
* Jacob Dawson
**email: ps1@jmdawson [dot] net
** slack handle: @Jacob M. Dawson
* Sean Blum
**email: arthifflaw [at] gmail [dot] com
** slack handle: @Sean Blum

=== Cold Metals Authorizers ===
==== Basic Authorization: Tier 1 ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* [[User:mct|McTavish McArdle]]
** (preferred) email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== LeBlond Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Clausing Lathe ====
* Anna Yu
** email: annotatehere [at] gmail [dot] com

==== Bridgeport Knee Mill ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== Grizzly Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== Surface Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Baldor Tool Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel

==== English Wheel ====
* Sam Abrahamson
** email: sammyabe6 [at] gmail [dot] com
** slack handle: @Sammy Abe

=== Small Metals Authorizer ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally

=== Tormach Authorizers ===
* Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David

=== Woodshop Authorizers and maintenance. ===
*Gary Newhouse - shop storage, wiki, Canvas course manager
** email Gnewhouse @ gmail dot com
**slack handle @garynhouse

* Ralph Brendler - General auth, mortise and tenon jigs, and multi-router
** email: rebrendler [at] gmail [dot] com
** slack handle: @Ralph Brendler

*David Earl
** slack handle @david earl

* Joseph Staffa
** Slack handle : @joseph Staffa

* Ian Sampson -general Auth, maintenance, wiki, Canvas courses

* Brenda Caflin -General Auth , maint,

* Jim Leonardson - small tool maintenance

* dan Ennion - general Auth, maintenance.

* Dan Walsh - gen auth, maintenance

* Brendan Twaddell - gen auth, maintenance

* Donzell Gordon - Woodshop Lathe Only
** email: donzellphoto [at] gmail [dot] com
** slack handle: @Donzell007

*Glen Peterson - Lathe only

* Sam Paris. Host

* Michelle deLeon. Authorizer,

=== Membership Management Team (MMT) ===
* Team Lead: Vacant
** email: mmt [at] pumpingstationone [dot] org
** slack handle:
* Scholarship Liason: Nathan Upchurch
** email: scholarships [at] pumpingstationone [dot] org
** slack handle: @Nathan U
* Member: Scott Yoder
** email: mmt [at] pumpingstationone [dot] org
** slack handle: @Scott yoder

=== General Operations (GenOps) ===

All are generalists but each has a primary responsibility.

* Team Lead: Andrew Morris
** email: genops [at] pumpingstationone [dot] org
** slack handle: @morrand
* Woodshop Storage Manager: Gary Newhouse
** email: genops [at] pumpingstationone [dot] org
** slack handle: @GARYn
* other areas storage manager : Sean Blum
** email: genops [at] pumpingstationone [dot] org
** slack handle: @Sean Blum
*operations Liason: Brian Desmond
** slack handle: @Brian D
* operations advisor: Brian Barnt
** slack handle: @Bbarnt

== Board-Appointed Officers ==

=== Chief Technology Officer ===
* Name: Sky Nova
** email: cto@pumpingstationone [dot] org
** slack handle: @Sky

=== Education Officer ===
* Name: currently vacant

=== Communications/PR ===
* Name: Alicia Johnson
** email: press [at] pumpingstationone [dot] org pr@pumpingstationone [dot] org
** slack handle:

=== Treasurer ===
* Name: Carl Karsten
** email: treasurer [at] pumpingstationone [dot] org

== Board of Directors ==
* President: Paul Ocampo
* Vice President: Nathan Upchurch
* Secretary: Joe Mertz
* Director-at-Large: Tim Bielawa
* Director-at-Large: Donzell Gordon
* Director-at-Large:Jennie Plasterer
* Director-at-Large: Fidel Galano
* Director-at-Large: Jesse Seay

Volunteer Positions

2023-05-12T00:49:53Z

Aerishay: /* Area Hosts */

The Board of Directors has designated the following official Volunteer Positions. See [[Area Hosts and Volunteer Positions Policy]] for more information. See also [[:Category:Hosted Areas|Area Hosts]] for a list of Area Hosts.

= Volunteer Positions =

==== Responsibilities ====
*Each Volunteer's roles may vary. These volunteers serve to assist in the general maintenance of the space and community in conjunction with specific Area Hosts.

== Area Hosts ==
''Main article: [[Area Hosts]]''

=== 2D Printers ===
* Davis Sayer
** email: 2dprinting [at] pumpingstationone [dot] org
** slack handle: davissayer

=== 3D Printing ===
* Matt Keith - Hardware/Software Upgrades & Maintenance
** email: 3dprinting [at] pumpingstationone [dot] org
* Sam Donahue - Authorizations
** email: 3dprinting [at] pumpingstationone [dot] org
** slack handle: @Sam Donahue
** slack channels
***3d_layers

=== Specialty 3D Printing ===
* Books
**email: books@pumpingstationone.org

=== Arts & Crafts ===
* Lydia Miller
** email: arts [at] pumpingstationone [dot] org
** slack handle: @Lydia Miller

=== CNC Machining ===
* Adam Molski
** email: cnc [at] pumpingstationone [dot] org
** slack handle: @MikeThompson
** slack channels
***fusion-360
***cad-cam
***cnc
***tormach_user_group

=== Cold Metals ===
* Jim Brink
** email: coldmetals@pumpingstationone.org
** email: 2010jfb[at] gmail [dot] com
** slack handle: @Jim Brink
** slack channels
***coldmetals

=== Electronics ===
* Andrew Wingate
** email: electronics@pumpingstationone [dot]
** slack handle: @Anna Yu
** slack channels
***electronics

=== Gen Ops ===
* Andrew Morris
** email: GenOps [at] pumpingstationone [dot] org
** slack handle: @morrand

=== Hot Metals ===
* Ron Olson
** email: hotmetals [at] pumpingstationone [dot] org
** slack handle: @tackoknight
** slack channels
***hotmetalshop

=== Kitchen ===
* Vacant as of May 2023, to be filled by end of May 2023
** email: kitchen [at] pumpingstationone [dot] org (or info@pumpingstationone.org in the meantime until that role is filled)
** slack handle:
**slack channels
***kitchen

=== Lasers ===
* Jordan Kessel
** email: lasers [at] pumpingstationone [dot] org
** slack handle: @Jordan
** slack channels
***lasers

=== Small Metals ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally
** slack channels
***small-metals

=== Woodshop ===
* Sam Paris
** email: woodshop [at] pumpingstationone [dot] org
** slack handle: @Sam Paris
** slack channels
***woodshop

=== Events Coordinator ===
* Contact: [[user:lyn|Lyn Cole]]
** email: parties {at} pumpingstationone [dot] org
** slack handle: @LynPurple

== Authorizers ==
''Main article: [[Volunteer Authorizer]]''

Getting authorized on tools can be tough. Sometimes it's hard for new members to figure out how to get authorized, sometimes classes fill up in hours, sometimes classes aren't scheduled regularly. We want to fix that. The Board has created the following Volunteer Positions. We need a few members to step up and offer their time to get people authorized.

==== Responsibilities and Incentives ====

* Another page with a description of volunteer authorizer positions is here https://wiki.pumpingstationone.org/Volunteer_Authorizer

=== CNC Authorizer ===
* Shopbot: David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David
* Tormach: Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* Boss Laser: Jeff Zelnio
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Jeffz
* Boss Laser: Andrew Camardella
** email: laser-auths@pumpingstationone [dot] org
** slack handle: @rtystgeeke
* Universal Laser: Ash Jasani
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Ash
* Universal Laser: Esty Wexler
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Esty Wexler

=== Hot Metals Authorizers ===
* Daron Wooding
** email: daron.wooding [at] gmail [dot] com
* Aaron Feigen
**email: aaronfeigen [at] gmail [dot] com
** slack handle: @nibbtastic
* Jacob Dawson
**email: ps1@jmdawson [dot] net
** slack handle: @Jacob M. Dawson
* Sean Blum
**email: arthifflaw [at] gmail [dot] com
** slack handle: @Sean Blum

=== Cold Metals Authorizers ===
==== Basic Authorization: Tier 1 ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* [[User:mct|McTavish McArdle]]
** (preferred) email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== LeBlond Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Clausing Lathe ====
* Anna Yu
** email: annotatehere [at] gmail [dot] com

==== Bridgeport Knee Mill ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== Grizzly Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== Surface Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Baldor Tool Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel

==== English Wheel ====
* Sam Abrahamson
** email: sammyabe6 [at] gmail [dot] com
** slack handle: @Sammy Abe

=== Small Metals Authorizer ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally

=== Tormach Authorizers ===
* Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David

=== Woodshop Authorizers and maintenance. ===
*Gary Newhouse - shop storage, wiki, Canvas course manager
** email Gnewhouse @ gmail dot com
**slack handle @garynhouse

* Ralph Brendler - General auth, mortise and tenon jigs, and multi-router
** email: rebrendler [at] gmail [dot] com
** slack handle: @Ralph Brendler

*David Earl
** slack handle @david earl

* Joseph Staffa
** Slack handle : @joseph Staffa

* Ian Sampson -general Auth, maintenance, wiki, Canvas courses

* Brenda Caflin -General Auth , maint,

* Jim Leonardson - small tool maintenance

* dan Ennion - general Auth, maintenance.

* Dan Walsh - gen auth, maintenance

* Brendan Twaddell - gen auth, maintenance

* Donzell Gordon - Woodshop Lathe Only
** email: donzellphoto [at] gmail [dot] com
** slack handle: @Donzell007

*Glen Peterson - Lathe only

* Sam Paris. Host

* Michelle deLeon. Authorizer,

=== Membership Management Team (MMT) ===
* Team Lead: Vacant
** email: mmt [at] pumpingstationone [dot] org
** slack handle:
* Scholarship Liason: Nathan Upchurch
** email: scholarships [at] pumpingstationone [dot] org
** slack handle: @Nathan U
* Member: Scott Yoder
** email: mmt [at] pumpingstationone [dot] org
** slack handle: @Scott yoder

=== General Operations (GenOps) ===

All are generalists but each has a primary responsibility.

* Team Lead: Andrew Morris
** email: genops [at] pumpingstationone [dot] org
** slack handle: @morrand
* Woodshop Storage Manager: Gary Newhouse
** email: genops [at] pumpingstationone [dot] org
** slack handle: @GARYn
* other areas storage manager : Sean Blum
** email: genops [at] pumpingstationone [dot] org
** slack handle: @Sean Blum
*operations Liason: Brian Desmond
** slack handle: @Brian D
* operations advisor: Brian Barnt
** slack handle: @Bbarnt

== Board-Appointed Officers ==

=== Chief Technology Officer ===
* Name: Sky Nova
** email: cto@pumpingstationone [dot] org
** slack handle: @Sky

=== Education Officer ===
* Name: currently vacant

=== Communications/PR ===
* Name: Alicia Johnson
** email: press [at] pumpingstationone [dot] org pr@pumpingstationone [dot] org
** slack handle:

=== Treasurer ===
* Name: Carl Karsten
** email: treasurer [at] pumpingstationone [dot] org

== Board of Directors ==
* President: Paul Ocampo
* Vice President: Nathan Upchurch
* Secretary: Joe Mertz
* Director-at-Large: Tim Bielawa
* Director-at-Large: Donzell Gordon
* Director-at-Large:Jennie Plasterer
* Director-at-Large: Fidel Galano
* Director-at-Large: Jesse Seay

Volunteer Positions

2023-05-12T00:48:22Z

Aerishay: /* Kitchen */

The Board of Directors has designated the following official Volunteer Positions. See [[Area Hosts and Volunteer Positions Policy]] for more information. See also [[:Category:Hosted Areas|Area Hosts]] for a list of Area Hosts.

= Volunteer Positions =

==== Responsibilities ====
*Each Volunteer's roles may vary. These volunteers serve to assist in the general maintenance of the space and community in conjunction with specific Area Hosts.

== Area Hosts ==
''Main article: [[Area Hosts]]''

=== 2D Printers ===
* Davis Sayer
** email: 2dprinting [at] pumpingstationone [dot] org
** slack handle: davissayer

=== 3D Printing ===
* Matt Keith - Hardware/Software Upgrades & Maintenance
** email: 3dprinting [at] pumpingstationone [dot] org
* Sam Donahue - Authorizations
** email: 3dprinting [at] pumpingstationone [dot] org
** slack handle: @Sam Donahue
** slack channels
***3d_layers

=== Arts & Crafts ===
* Lydia Miller
** email: arts [at] pumpingstationone [dot] org
** slack handle: @Lydia Miller

=== CNC Machining ===
* Adam Molski
** email: cnc [at] pumpingstationone [dot] org
** slack handle: @MikeThompson
** slack channels
***fusion-360
***cad-cam
***cnc
***tormach_user_group

=== Cold Metals ===
* Jim Brink
** email: coldmetals@pumpingstationone.org
** email: 2010jfb[at] gmail [dot] com
** slack handle: @Jim Brink
** slack channels
***coldmetals

=== Electronics ===
* Andrew Wingate
** email: electronics@pumpingstationone [dot]
** slack handle: @Anna Yu
** slack channels
***electronics

=== Gen Ops ===
* Andrew Morris
** email: GenOps [at] pumpingstationone [dot] org
** slack handle: @morrand

=== Hot Metals ===
* Ron Olson
** email: hotmetals [at] pumpingstationone [dot] org
** slack handle: @tackoknight
** slack channels
***hotmetalshop

=== Kitchen ===
* Vacant as of May 2023, to be filled by end of May 2023
** email: kitchen [at] pumpingstationone [dot] org (or info@pumpingstationone.org in the meantime until that role is filled)
** slack handle:
**slack channels
***kitchen

=== Lasers ===
* Jordan Kessel
** email: lasers [at] pumpingstationone [dot] org
** slack handle: @Jordan
** slack channels
***lasers

=== Small Metals ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally
** slack channels
***small-metals

=== Woodshop ===
* Sam Paris
** email: woodshop [at] pumpingstationone [dot] org
** slack handle: @Sam Paris
** slack channels
***woodshop

=== Events Coordinator ===
* Contact: [[user:lyn|Lyn Cole]]
** email: parties {at} pumpingstationone [dot] org
** slack handle: @LynPurple

== Authorizers ==
''Main article: [[Volunteer Authorizer]]''

Getting authorized on tools can be tough. Sometimes it's hard for new members to figure out how to get authorized, sometimes classes fill up in hours, sometimes classes aren't scheduled regularly. We want to fix that. The Board has created the following Volunteer Positions. We need a few members to step up and offer their time to get people authorized.

==== Responsibilities and Incentives ====

* Another page with a description of volunteer authorizer positions is here https://wiki.pumpingstationone.org/Volunteer_Authorizer

=== CNC Authorizer ===
* Shopbot: David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David
* Tormach: Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* Boss Laser: Jeff Zelnio
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Jeffz
* Boss Laser: Andrew Camardella
** email: laser-auths@pumpingstationone [dot] org
** slack handle: @rtystgeeke
* Universal Laser: Ash Jasani
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Ash
* Universal Laser: Esty Wexler
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Esty Wexler

=== Hot Metals Authorizers ===
* Daron Wooding
** email: daron.wooding [at] gmail [dot] com
* Aaron Feigen
**email: aaronfeigen [at] gmail [dot] com
** slack handle: @nibbtastic
* Jacob Dawson
**email: ps1@jmdawson [dot] net
** slack handle: @Jacob M. Dawson
* Sean Blum
**email: arthifflaw [at] gmail [dot] com
** slack handle: @Sean Blum

=== Cold Metals Authorizers ===
==== Basic Authorization: Tier 1 ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* [[User:mct|McTavish McArdle]]
** (preferred) email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== LeBlond Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Clausing Lathe ====
* Anna Yu
** email: annotatehere [at] gmail [dot] com

==== Bridgeport Knee Mill ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== Grizzly Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== Surface Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Baldor Tool Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel

==== English Wheel ====
* Sam Abrahamson
** email: sammyabe6 [at] gmail [dot] com
** slack handle: @Sammy Abe

=== Small Metals Authorizer ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally

=== Tormach Authorizers ===
* Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David

=== Woodshop Authorizers and maintenance. ===
*Gary Newhouse - shop storage, wiki, Canvas course manager
** email Gnewhouse @ gmail dot com
**slack handle @garynhouse

* Ralph Brendler - General auth, mortise and tenon jigs, and multi-router
** email: rebrendler [at] gmail [dot] com
** slack handle: @Ralph Brendler

*David Earl
** slack handle @david earl

* Joseph Staffa
** Slack handle : @joseph Staffa

* Ian Sampson -general Auth, maintenance, wiki, Canvas courses

* Brenda Caflin -General Auth , maint,

* Jim Leonardson - small tool maintenance

* dan Ennion - general Auth, maintenance.

* Dan Walsh - gen auth, maintenance

* Brendan Twaddell - gen auth, maintenance

* Donzell Gordon - Woodshop Lathe Only
** email: donzellphoto [at] gmail [dot] com
** slack handle: @Donzell007

*Glen Peterson - Lathe only

* Sam Paris. Host

* Michelle deLeon. Authorizer,

=== Membership Management Team (MMT) ===
* Team Lead: Vacant
** email: mmt [at] pumpingstationone [dot] org
** slack handle:
* Scholarship Liason: Nathan Upchurch
** email: scholarships [at] pumpingstationone [dot] org
** slack handle: @Nathan U
* Member: Scott Yoder
** email: mmt [at] pumpingstationone [dot] org
** slack handle: @Scott yoder

=== General Operations (GenOps) ===

All are generalists but each has a primary responsibility.

* Team Lead: Andrew Morris
** email: genops [at] pumpingstationone [dot] org
** slack handle: @morrand
* Woodshop Storage Manager: Gary Newhouse
** email: genops [at] pumpingstationone [dot] org
** slack handle: @GARYn
* other areas storage manager : Sean Blum
** email: genops [at] pumpingstationone [dot] org
** slack handle: @Sean Blum
*operations Liason: Brian Desmond
** slack handle: @Brian D
* operations advisor: Brian Barnt
** slack handle: @Bbarnt

== Board-Appointed Officers ==

=== Chief Technology Officer ===
* Name: Sky Nova
** email: cto@pumpingstationone [dot] org
** slack handle: @Sky

=== Education Officer ===
* Name: currently vacant

=== Communications/PR ===
* Name: Alicia Johnson
** email: press [at] pumpingstationone [dot] org pr@pumpingstationone [dot] org
** slack handle:

=== Treasurer ===
* Name: Carl Karsten
** email: treasurer [at] pumpingstationone [dot] org

== Board of Directors ==
* President: Paul Ocampo
* Vice President: Nathan Upchurch
* Secretary: Joe Mertz
* Director-at-Large: Tim Bielawa
* Director-at-Large: Donzell Gordon
* Director-at-Large:Jennie Plasterer
* Director-at-Large: Fidel Galano
* Director-at-Large: Jesse Seay

Volunteer Positions

2023-05-12T00:48:05Z

Aerishay: /* Lasers */

The Board of Directors has designated the following official Volunteer Positions. See [[Area Hosts and Volunteer Positions Policy]] for more information. See also [[:Category:Hosted Areas|Area Hosts]] for a list of Area Hosts.

= Volunteer Positions =

==== Responsibilities ====
*Each Volunteer's roles may vary. These volunteers serve to assist in the general maintenance of the space and community in conjunction with specific Area Hosts.

== Area Hosts ==
''Main article: [[Area Hosts]]''

=== 2D Printers ===
* Davis Sayer
** email: 2dprinting [at] pumpingstationone [dot] org
** slack handle: davissayer

=== 3D Printing ===
* Matt Keith - Hardware/Software Upgrades & Maintenance
** email: 3dprinting [at] pumpingstationone [dot] org
* Sam Donahue - Authorizations
** email: 3dprinting [at] pumpingstationone [dot] org
** slack handle: @Sam Donahue
** slack channels
***3d_layers

=== Arts & Crafts ===
* Lydia Miller
** email: arts [at] pumpingstationone [dot] org
** slack handle: @Lydia Miller

=== CNC Machining ===
* Adam Molski
** email: cnc [at] pumpingstationone [dot] org
** slack handle: @MikeThompson
** slack channels
***fusion-360
***cad-cam
***cnc
***tormach_user_group

=== Cold Metals ===
* Jim Brink
** email: coldmetals@pumpingstationone.org
** email: 2010jfb[at] gmail [dot] com
** slack handle: @Jim Brink
** slack channels
***coldmetals

=== Electronics ===
* Andrew Wingate
** email: electronics@pumpingstationone [dot]
** slack handle: @Anna Yu
** slack channels
***electronics

=== Gen Ops ===
* Andrew Morris
** email: GenOps [at] pumpingstationone [dot] org
** slack handle: @morrand

=== Hot Metals ===
* Ron Olson
** email: hotmetals [at] pumpingstationone [dot] org
** slack handle: @tackoknight
** slack channels
***hotmetalshop

=== Kitchen ===
* Vacant as of May, to be filled by end of May
** email: kitchen [at] pumpingstationone [dot] org (or info@pumpingstationone.org in the meantime until that role is filled)
** slack handle:
**slack channels
***kitchen

=== Lasers ===
* Jordan Kessel
** email: lasers [at] pumpingstationone [dot] org
** slack handle: @Jordan
** slack channels
***lasers

=== Small Metals ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally
** slack channels
***small-metals

=== Woodshop ===
* Sam Paris
** email: woodshop [at] pumpingstationone [dot] org
** slack handle: @Sam Paris
** slack channels
***woodshop

=== Events Coordinator ===
* Contact: [[user:lyn|Lyn Cole]]
** email: parties {at} pumpingstationone [dot] org
** slack handle: @LynPurple

== Authorizers ==
''Main article: [[Volunteer Authorizer]]''

Getting authorized on tools can be tough. Sometimes it's hard for new members to figure out how to get authorized, sometimes classes fill up in hours, sometimes classes aren't scheduled regularly. We want to fix that. The Board has created the following Volunteer Positions. We need a few members to step up and offer their time to get people authorized.

==== Responsibilities and Incentives ====

* Another page with a description of volunteer authorizer positions is here https://wiki.pumpingstationone.org/Volunteer_Authorizer

=== CNC Authorizer ===
* Shopbot: David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David
* Tormach: Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* Boss Laser: Jeff Zelnio
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Jeffz
* Boss Laser: Andrew Camardella
** email: laser-auths@pumpingstationone [dot] org
** slack handle: @rtystgeeke
* Universal Laser: Ash Jasani
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Ash
* Universal Laser: Esty Wexler
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Esty Wexler

=== Hot Metals Authorizers ===
* Daron Wooding
** email: daron.wooding [at] gmail [dot] com
* Aaron Feigen
**email: aaronfeigen [at] gmail [dot] com
** slack handle: @nibbtastic
* Jacob Dawson
**email: ps1@jmdawson [dot] net
** slack handle: @Jacob M. Dawson
* Sean Blum
**email: arthifflaw [at] gmail [dot] com
** slack handle: @Sean Blum

=== Cold Metals Authorizers ===
==== Basic Authorization: Tier 1 ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* [[User:mct|McTavish McArdle]]
** (preferred) email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== LeBlond Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Clausing Lathe ====
* Anna Yu
** email: annotatehere [at] gmail [dot] com

==== Bridgeport Knee Mill ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== Grizzly Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== Surface Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Baldor Tool Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel

==== English Wheel ====
* Sam Abrahamson
** email: sammyabe6 [at] gmail [dot] com
** slack handle: @Sammy Abe

=== Small Metals Authorizer ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally

=== Tormach Authorizers ===
* Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David

=== Woodshop Authorizers and maintenance. ===
*Gary Newhouse - shop storage, wiki, Canvas course manager
** email Gnewhouse @ gmail dot com
**slack handle @garynhouse

* Ralph Brendler - General auth, mortise and tenon jigs, and multi-router
** email: rebrendler [at] gmail [dot] com
** slack handle: @Ralph Brendler

*David Earl
** slack handle @david earl

* Joseph Staffa
** Slack handle : @joseph Staffa

* Ian Sampson -general Auth, maintenance, wiki, Canvas courses

* Brenda Caflin -General Auth , maint,

* Jim Leonardson - small tool maintenance

* dan Ennion - general Auth, maintenance.

* Dan Walsh - gen auth, maintenance

* Brendan Twaddell - gen auth, maintenance

* Donzell Gordon - Woodshop Lathe Only
** email: donzellphoto [at] gmail [dot] com
** slack handle: @Donzell007

*Glen Peterson - Lathe only

* Sam Paris. Host

* Michelle deLeon. Authorizer,

=== Membership Management Team (MMT) ===
* Team Lead: Vacant
** email: mmt [at] pumpingstationone [dot] org
** slack handle:
* Scholarship Liason: Nathan Upchurch
** email: scholarships [at] pumpingstationone [dot] org
** slack handle: @Nathan U
* Member: Scott Yoder
** email: mmt [at] pumpingstationone [dot] org
** slack handle: @Scott yoder

=== General Operations (GenOps) ===

All are generalists but each has a primary responsibility.

* Team Lead: Andrew Morris
** email: genops [at] pumpingstationone [dot] org
** slack handle: @morrand
* Woodshop Storage Manager: Gary Newhouse
** email: genops [at] pumpingstationone [dot] org
** slack handle: @GARYn
* other areas storage manager : Sean Blum
** email: genops [at] pumpingstationone [dot] org
** slack handle: @Sean Blum
*operations Liason: Brian Desmond
** slack handle: @Brian D
* operations advisor: Brian Barnt
** slack handle: @Bbarnt

== Board-Appointed Officers ==

=== Chief Technology Officer ===
* Name: Sky Nova
** email: cto@pumpingstationone [dot] org
** slack handle: @Sky

=== Education Officer ===
* Name: currently vacant

=== Communications/PR ===
* Name: Alicia Johnson
** email: press [at] pumpingstationone [dot] org pr@pumpingstationone [dot] org
** slack handle:

=== Treasurer ===
* Name: Carl Karsten
** email: treasurer [at] pumpingstationone [dot] org

== Board of Directors ==
* President: Paul Ocampo
* Vice President: Nathan Upchurch
* Secretary: Joe Mertz
* Director-at-Large: Tim Bielawa
* Director-at-Large: Donzell Gordon
* Director-at-Large:Jennie Plasterer
* Director-at-Large: Fidel Galano
* Director-at-Large: Jesse Seay

Volunteer Positions

2023-05-12T00:46:38Z

Aerishay: /* Kitchen */

The Board of Directors has designated the following official Volunteer Positions. See [[Area Hosts and Volunteer Positions Policy]] for more information. See also [[:Category:Hosted Areas|Area Hosts]] for a list of Area Hosts.

= Volunteer Positions =

==== Responsibilities ====
*Each Volunteer's roles may vary. These volunteers serve to assist in the general maintenance of the space and community in conjunction with specific Area Hosts.

== Area Hosts ==
''Main article: [[Area Hosts]]''

=== 2D Printers ===
* Davis Sayer
** email: 2dprinting [at] pumpingstationone [dot] org
** slack handle: davissayer

=== 3D Printing ===
* Matt Keith - Hardware/Software Upgrades & Maintenance
** email: 3dprinting [at] pumpingstationone [dot] org
* Sam Donahue - Authorizations
** email: 3dprinting [at] pumpingstationone [dot] org
** slack handle: @Sam Donahue
** slack channels
***3d_layers

=== Arts & Crafts ===
* Lydia Miller
** email: arts [at] pumpingstationone [dot] org
** slack handle: @Lydia Miller

=== CNC Machining ===
* Adam Molski
** email: cnc [at] pumpingstationone [dot] org
** slack handle: @MikeThompson
** slack channels
***fusion-360
***cad-cam
***cnc
***tormach_user_group

=== Cold Metals ===
* Jim Brink
** email: coldmetals@pumpingstationone.org
** email: 2010jfb[at] gmail [dot] com
** slack handle: @Jim Brink
** slack channels
***coldmetals

=== Electronics ===
* Andrew Wingate
** email: electronics@pumpingstationone [dot]
** slack handle: @Anna Yu
** slack channels
***electronics

=== Gen Ops ===
* Andrew Morris
** email: GenOps [at] pumpingstationone [dot] org
** slack handle: @morrand

=== Hot Metals ===
* Ron Olson
** email: hotmetals [at] pumpingstationone [dot] org
** slack handle: @tackoknight
** slack channels
***hotmetalshop

=== Kitchen ===
* Vacant as of May, to be filled by end of May
** email: kitchen [at] pumpingstationone [dot] org (or info@pumpingstationone.org in the meantime until that role is filled)
** slack handle:
**slack channels
***kitchen

=== Lasers ===
* Ash Jasani
** email: lasers [at] pumpingstationone [dot] org
** slack handle: @Ash
** slack channels
***lasers

=== Small Metals ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally
** slack channels
***small-metals

=== Woodshop ===
* Sam Paris
** email: woodshop [at] pumpingstationone [dot] org
** slack handle: @Sam Paris
** slack channels
***woodshop

=== Events Coordinator ===
* Contact: [[user:lyn|Lyn Cole]]
** email: parties {at} pumpingstationone [dot] org
** slack handle: @LynPurple

== Authorizers ==
''Main article: [[Volunteer Authorizer]]''

Getting authorized on tools can be tough. Sometimes it's hard for new members to figure out how to get authorized, sometimes classes fill up in hours, sometimes classes aren't scheduled regularly. We want to fix that. The Board has created the following Volunteer Positions. We need a few members to step up and offer their time to get people authorized.

==== Responsibilities and Incentives ====

* Another page with a description of volunteer authorizer positions is here https://wiki.pumpingstationone.org/Volunteer_Authorizer

=== CNC Authorizer ===
* Shopbot: David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David
* Tormach: Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* Boss Laser: Jeff Zelnio
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Jeffz
* Boss Laser: Andrew Camardella
** email: laser-auths@pumpingstationone [dot] org
** slack handle: @rtystgeeke
* Universal Laser: Ash Jasani
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Ash
* Universal Laser: Esty Wexler
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Esty Wexler

=== Hot Metals Authorizers ===
* Daron Wooding
** email: daron.wooding [at] gmail [dot] com
* Aaron Feigen
**email: aaronfeigen [at] gmail [dot] com
** slack handle: @nibbtastic
* Jacob Dawson
**email: ps1@jmdawson [dot] net
** slack handle: @Jacob M. Dawson
* Sean Blum
**email: arthifflaw [at] gmail [dot] com
** slack handle: @Sean Blum

=== Cold Metals Authorizers ===
==== Basic Authorization: Tier 1 ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* [[User:mct|McTavish McArdle]]
** (preferred) email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== LeBlond Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Clausing Lathe ====
* Anna Yu
** email: annotatehere [at] gmail [dot] com

==== Bridgeport Knee Mill ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== Grizzly Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== Surface Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Baldor Tool Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel

==== English Wheel ====
* Sam Abrahamson
** email: sammyabe6 [at] gmail [dot] com
** slack handle: @Sammy Abe

=== Small Metals Authorizer ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally

=== Tormach Authorizers ===
* Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David

=== Woodshop Authorizers and maintenance. ===
*Gary Newhouse - shop storage, wiki, Canvas course manager
** email Gnewhouse @ gmail dot com
**slack handle @garynhouse

* Ralph Brendler - General auth, mortise and tenon jigs, and multi-router
** email: rebrendler [at] gmail [dot] com
** slack handle: @Ralph Brendler

*David Earl
** slack handle @david earl

* Joseph Staffa
** Slack handle : @joseph Staffa

* Ian Sampson -general Auth, maintenance, wiki, Canvas courses

* Brenda Caflin -General Auth , maint,

* Jim Leonardson - small tool maintenance

* dan Ennion - general Auth, maintenance.

* Dan Walsh - gen auth, maintenance

* Brendan Twaddell - gen auth, maintenance

* Donzell Gordon - Woodshop Lathe Only
** email: donzellphoto [at] gmail [dot] com
** slack handle: @Donzell007

*Glen Peterson - Lathe only

* Sam Paris. Host

* Michelle deLeon. Authorizer,

=== Membership Management Team (MMT) ===
* Team Lead: Vacant
** email: mmt [at] pumpingstationone [dot] org
** slack handle:
* Scholarship Liason: Nathan Upchurch
** email: scholarships [at] pumpingstationone [dot] org
** slack handle: @Nathan U
* Member: Scott Yoder
** email: mmt [at] pumpingstationone [dot] org
** slack handle: @Scott yoder

=== General Operations (GenOps) ===

All are generalists but each has a primary responsibility.

* Team Lead: Andrew Morris
** email: genops [at] pumpingstationone [dot] org
** slack handle: @morrand
* Woodshop Storage Manager: Gary Newhouse
** email: genops [at] pumpingstationone [dot] org
** slack handle: @GARYn
* other areas storage manager : Sean Blum
** email: genops [at] pumpingstationone [dot] org
** slack handle: @Sean Blum
*operations Liason: Brian Desmond
** slack handle: @Brian D
* operations advisor: Brian Barnt
** slack handle: @Bbarnt

== Board-Appointed Officers ==

=== Chief Technology Officer ===
* Name: Sky Nova
** email: cto@pumpingstationone [dot] org
** slack handle: @Sky

=== Education Officer ===
* Name: currently vacant

=== Communications/PR ===
* Name: Alicia Johnson
** email: press [at] pumpingstationone [dot] org pr@pumpingstationone [dot] org
** slack handle:

=== Treasurer ===
* Name: Carl Karsten
** email: treasurer [at] pumpingstationone [dot] org

== Board of Directors ==
* President: Paul Ocampo
* Vice President: Nathan Upchurch
* Secretary: Joe Mertz
* Director-at-Large: Tim Bielawa
* Director-at-Large: Donzell Gordon
* Director-at-Large:Jennie Plasterer
* Director-at-Large: Fidel Galano
* Director-at-Large: Jesse Seay

Board Meeting Notes 2023-04-18

2023-04-23T20:15:32Z

Aerishay:

{{Board Meeting Notes
| Previous YYYY-MM-DD= 2023-03-21
| Next YYYY-MM-DD= 2023-04-18
| YYYY=2023
}}

Meeting Start:

== Attendance ==
* Board Members
** James L.
** Jennie P.
** Jesse S.
** V.

* Other Members
** Andrew M.
** Lydia
** Julia
**Several other people, I don't know them and I won't ask

== Agenda ==

* Consent Agenda
* Committee Reports
* Read mail
* Financial/membership report
* Review the PayPal and banking transactions
* Member leaving reason reports
* Check Freshdesk queue
* New business
* Old business

== Minutes ==

=== Discussion on previous minutes ===

=== Consent Agenda ===

=== Committee Reports ===

Reports from [[Committees]]

=== Mail ===

=== Financial Report ===
* '''Chase Checking:''' 37,410.27
* '''Chase Savings:''' 34,204.63
* '''PEX:''' 11,087.32
* '''PayPal:''' 14,077.21

=== Membership Report ===

* '''Number of Members: 543'''
* '''Quorum: '''

=== Review the PayPal and banking transactions ===

=== Freshdesk ===

Login link: https://pumpingstationone.freshdesk.com

=== New Business ===

*This is not a board meeting. We do not have quorum. This is a board chat.
*Lydia has purchased embroidery machine for graphic arts and textiles
*The AC upstairs is still fucked
*Now that it is getting warm, we need to start caring about server closet heat again
**Andrew M. has the tools to figure out what to do about that (HVAC load capacity etc.)
**Julia says the max temp that is ok would be 70-75
**James suggests that 50 to 55 is more preferable and that we should perhaps insert insulation
**Andrew M. is currently point person for HVAC, but would perhaps like some other Team GenOpians to pick up some slack

*At 7:45PM we have departed for a closed Board Pow Wow, but not a meeting, though it looks like a meeting but it is not official enough to be a meeting, please note.

=== Old Business ===

== Votes ==

[[Category:Board_Meetings]]
[[Category:2023 Board Meetings]]

Board Meeting Notes 2023-04-18

2023-04-23T20:14:56Z

Aerishay: Created page with "{{Board Meeting Notes | Previous YYYY-MM-DD= 2023-03-21 | Next YYYY-MM-DD= 2023-04-18 | YYYY=2023 }} Meeting Start: == Attendance == * Board Members ** James L. ** Jennie..."

{{Board Meeting Notes
| Previous YYYY-MM-DD= 2023-03-21
| Next YYYY-MM-DD= 2023-04-18
| YYYY=2023
}}

Meeting Start:

== Attendance ==
* Board Members
** James L.
** Jennie P.
** Jesse S.
** V.

* Other Members
** Andrew M.
** Lydia
** Julia
**Several other people, I am sure they are nice but I am too nervous to say hi. I've talked to a lot of people today.

== Agenda ==

* Consent Agenda
* Committee Reports
* Read mail
* Financial/membership report
* Review the PayPal and banking transactions
* Member leaving reason reports
* Check Freshdesk queue
* New business
* Old business

== Minutes ==

=== Discussion on previous minutes ===

=== Consent Agenda ===

=== Committee Reports ===

Reports from [[Committees]]

=== Mail ===

=== Financial Report ===
* '''Chase Checking:''' 37,410.27
* '''Chase Savings:''' 34,204.63
* '''PEX:''' 11,087.32
* '''PayPal:''' 14,077.21

=== Membership Report ===

* '''Number of Members: 543'''
* '''Quorum: '''

=== Review the PayPal and banking transactions ===

=== Freshdesk ===

Login link: https://pumpingstationone.freshdesk.com

=== New Business ===

*This is not a board meeting. We do not have quorum. This is a board chat.
*Lydia has purchased embroidery machine for graphic arts and textiles
*The AC upstairs is still fucked
*Now that it is getting warm, we need to start caring about server closet heat again
**Andrew M. has the tools to figure out what to do about that (HVAC load capacity etc.)
**Julia says the max temp that is ok would be 70-75
**James suggests that 50 to 55 is more preferable and that we should perhaps insert insulation
**Andrew M. is currently point person for HVAC, but would perhaps like some other Team GenOpians to pick up some slack

*At 7:45PM we have departed for a closed Board Pow Wow, but not a meeting, though it looks like a meeting but it is not official enough to be a meeting, please note.

=== Old Business ===

== Votes ==

[[Category:Board_Meetings]]
[[Category:2023 Board Meetings]]

Reimbursement

2022-12-04T17:04:23Z

Aerishay: /* Ticket Generation */

== FAQ ==
* The Treasurer needs to know how you want to be paid - please say "Chase Quick Pay" as that is the easiest. other options are below.
* The Treasurer also needs to know what budget to apply this to.
* And The Treasurer needs help keeping track of things, so send a message to info@pumpingstationone.org so a ticket gets created and put in the Treasurer's queue.
* And all this other stuff might be relevant too.

== Online Form ==

Latest and greatest process!
Fill out this form:

https://airtable.com/shraWp865MVDj3VHZ

You can ignore everything below here, much of it is out of date and no longer correct.

== Authorization ==
*Ongoing payments such as utilities
*One time payments
**From an area or administrative budget
**For a vote

== Ticket Generation ==
If you are a member and you want to be reimbursed for some money you spent:

* Make sure the relevant area host is ok with you spending that money. Preferably before you spend it. The area host has no obligation to approve reimbursement for something you decided to purchase without consulting them.

* Use form above. If you message any email address, freshdesk, etc. --- we will tell you to go through the online form above. Save us an additional email?

* If you are someone resolving tickets on freshdesk, and you see someone asking for a reimbursement, please send them a link to this page.

== Freshdesk procedure ==
*[[Treasurer Procedures]]

== Executing Payment ==
*Chase
*Paypal

== Accounting ==
*[[Treasurer Procedures]]

[[Category:Admin]]
[[Category:Board Procedures]]

Reimbursement

2022-12-04T17:03:24Z

Aerishay: /* Ticket Generation */

== FAQ ==
* The Treasurer needs to know how you want to be paid - please say "Chase Quick Pay" as that is the easiest. other options are below.
* The Treasurer also needs to know what budget to apply this to.
* And The Treasurer needs help keeping track of things, so send a message to info@pumpingstationone.org so a ticket gets created and put in the Treasurer's queue.
* And all this other stuff might be relevant too.

== Online Form ==

Latest and greatest process!
Fill out this form:

https://airtable.com/shraWp865MVDj3VHZ

You can ignore everything below here, much of it is out of date and no longer correct.

== Authorization ==
*Ongoing payments such as utilities
*One time payments
**From an area or administrative budget
**For a vote

== Ticket Generation ==
If you are a member and you want to be reimbursed for some money you spent:

* Make sure the relevant area host is ok with you spending that money. Preferably before you spend it. The area host has no obligation to approve reimbursement for something you decided to purchase without consulting them.

* Use form above. If you message any email address, freshdesk, etc. --- we will tell you to go through the online form above. Save us an additional email?

== Freshdesk procedure ==
*[[Treasurer Procedures]]

== Executing Payment ==
*Chase
*Paypal

== Accounting ==
*[[Treasurer Procedures]]

[[Category:Admin]]
[[Category:Board Procedures]]

Supplemental Budget Vote 2022

2022-10-19T03:06:03Z

Aerishay: /* Background */

== Sponsors ==

* Carl Karsten
* James Lamken
* The Vulture
* Ron Olson
* Lydia Loya

== History ==

* Announced:
* Language locked:
* To be voted on:

== Background ==

While budgeting for 2022, we attempted to keep the budget light. It was difficult to predict our finances, having reached a low point in income during COVID's peak that was only tentatively recovering as we observed our membership begin to return. Fortunately, our finances are in a better place than expected, and we are looking likely to bring in some conservative amount rather than the 20K loss we had predicted based on last years numbers. With the flexibility afforded by that, we are hoping to ensure all areas receive the funding that they need to finish this year out with with the appropriate resources provided for areas to flourish rather than limping along.

* Hot metals expects to spend up to $1,200 on supplies (gas, other consumables) and any repairs that may be necessary until the end of the year. A lot of unexpected expenditures occurred in attempting to bring the CNC plasma cutter back online. [The current plasma cutter is properly dead [RIP] please look out for a plasma cutter vote in the near future].

* Graphic Arts and Textiles expects to spend up to $1,200 on general upkeep and supplies, a new airbrush set to replace our current malfunctioning set, and screen printing supplies

* 3D Printing Area expects to spend up to $1,200 on TBA

== Accounting ==

No budget funds roll over into the following year, so if this money does not get spent, it will not be added to the 2023 budget.

== Language ==

Authorize the Board to bequeath $1,200 to 3D Printing, Hot Metals, and Graphic Arts and Textiles as an addition to the existing 2022 Budget. These funds are to be spent by respective area hosts and their designated authorizers. This spending authorization goes into effect immediately after this vote passes and expires at 11:59PM on December 31st, 2022.

== Results ==
*Present:
*For:
*Against:
*Abstain:

==Categories==

[[Category:Votes]]
[[Category:2020 Votes]]

Supplemental Budget Vote 2022

2022-10-19T02:58:52Z

Aerishay:

== Sponsors ==

* Carl Karsten
* James Lamken
* The Vulture
* Ron Olson
* Lydia Loya

== History ==

* Announced:
* Language locked:
* To be voted on:

== Background ==

While budgeting for 2022, we attempted to keep the budget light. It was difficult to predict our finances, having reached a low point in income during COVID's peak that was only tentatively recovering as we observed our membership begin to return. Fortunately, our finances are in a better place than expected, and we are looking likely to bring in some conservative amount rather than the 20K loss we had predicted based on last years numbers.

* Hot metals expects to spend up to $1,200 on supplies (gas, other consumables) and any repairs that may be necessary until the end of the year.

* Graphic Arts and Textiles expects to spend up to $1,200 on general upkeep and supplies, a new airbrush set to replace our current malfunctioning set, and screen printing supplies

* 3D Printing Area expects to spend up to $1,200 on TBA

== Accounting ==

No budget funds roll over into the following year, so if this money does not get spent, it will not be added to the 2023 budget.

== Language ==

Authorize the Board to bequeath $1,200 to 3D Printing, Hot Metals, and Graphic Arts and Textiles as an addition to the existing 2022 Budget. These funds are to be spent by respective area hosts and their designated authorizers. This spending authorization goes into effect immediately after this vote passes and expires at 11:59PM on December 31st, 2022.

== Results ==
*Present:
*For:
*Against:
*Abstain:

==Categories==

[[Category:Votes]]
[[Category:2020 Votes]]

Supplemental Budget Vote 2022

2022-10-19T02:54:14Z

Aerishay: Created page with "== Sponsors == * Carl Karsten * James Lamken * The Vulture * Ron Olson == History == * Announced: * Language locked: * To be voted on: == Background == While budgeting..."

== Sponsors ==
* Carl Karsten
* James Lamken
* The Vulture
* Ron Olson

== History ==

* Announced:
* Language locked:
* To be voted on:

== Background ==

While budgeting for 2022, we attempted to keep the budget light. It was difficult to predict our finances, having reached a low point in income during COVID's peak that was only tentatively recovering as we observed our membership begin to return. Fortunately, our finances are in a better place than expected, and we are looking likely to bring in some conservative amount rather than the 20K loss we had predicted based on last years numbers.

* Hot metals expects to spend up to $1,200 on

* Graphic Arts and Textiles expects to spend up to $1,200 on general upkeep and supplies and a new airbrush set to replace our current malfunctioning set

* 3D Printing Area

== Accounting and planning ==

== Language ==

Authorize the Board to bequeath $1,200 to 3D Printing, Hot Metals, and Graphic Arts and Textiles as an addition to the existing 2022 Budget. These funds are to be spent by respective area hosts and their designated authorizers. This spending authorization goes into effect immediately after this vote passes and expires at 11:59PM on December 31st, 2022.

== Results ==
*Present:
*For:
*Against:
*Abstain:

==Categories==

[[Category:Votes]]
[[Category:2020 Votes]]

Budget Balance

2022-10-18T23:47:23Z

Aerishay:

== About ==

This page is to show the current list of area budgets and the remaining available balance.

'''This page is only an estimate.'''

If the number you see is incorrect, you must first look within yourself and ask, "did I send in my receipts on time." Because only APPROVED expenses are reflected here, and approved expenses require documentation.

Additionally, keep in mind '''all area hosts are expected to maintain their own budget, This includes tracking your spending.''' We will update this as we can, in order to help ya'll out. We are managing 20ish budgets and 30 cards, you are maintaining one. Please keep that in mind.

This page will persist through the years being the one and only page of budget truth and knowledge.

'''DO NOT''' create a different version of this page at the end of the budget year.

For additional questions regarding these balances, email treasurer {at} pumpingstationone.org.

=== Page Info ===

{| style="text-align: center; width: 20%;" class="wikitable"
! Budget Year
| 2022
|-
! Last Maintained
| 10/18/22
|}

== Current Data ==

{| class="wikitable sortable"
! Area
! Total Budget
! Spent Budget
! Card Status
! Last Updated
! Notes
|-
| CNC
| 9813
| 1254.82
| Active
| 10/18/22
| None
|-
| Lasers
| 5550
| 1594.54
| None
| 10/18/22
| None
|-
| 3D Printing
| 6645
| 6507.08
| Active
| 10/18/22
| None
|-
| Specialty Printing
| 0
| 0
| None
| 10/18/22
| None
|-
| 2D Printing
| 1700
| 49.49
| Ordered
| 10/18/22
| None
|-
| Electronics
| 4635
| 906.44
| Active
| 10/18/22
| None
|-
| Arts
| 5400
| 4454.23
| Active
| 10/18/22
| None
|-
| Hot Metals
| 8250
| 8351.48
| Active
| 10/18/22
| None
|-
| Kitchen
| 3600
| 1177.61
| Active
| 10/18/22
| None
|-
| Cold Metals
| 5400
| 995.08
| Active
| 10/18/22
| None
|-
| Woodshop
| 11550
| 7333.85
| Ordered
| 10/18/22
| None
|-
| Small Metals
| 4300
| 463.10
| Active
| 10/18/22
| None
|-
| Public Relations
| 1700
| 98.94
| Active
| 10/18/22
| None
|-
| CTO
| 12069
| 9293.85
| Active
| 10/18/22
| None
|-
| General Operations
| 38440
| 20452.55
| Active
| 10/18/22
| None
|}

Budget Balance

2022-10-18T06:47:13Z

Aerishay:

== About ==

This page is to show the current list of area budgets and the remaining available balance.

'''This page is only an estimate.'''

If the number you see is incorrect, you must first look within yourself and ask, "did I send in my receipts on time." Because only APPROVED expenses are reflected here, and approved expenses require documentation.

Additionally, keep in mind '''all area hosts are expected to maintain their own budget, This includes tracking your spending.''' We will update this as we can, in order to help ya'll out. We are managing 20ish budgets and 30 cards, you are maintaining one. Please keep that in mind.

This page will persist through the years being the one and only page of budget truth and knowledge.

'''DO NOT''' create a different version of this page at the end of the budget year.

For additional questions regarding these balances, email treasurer {at} pumpingstationone.org.

=== Page Info ===

{| style="text-align: center; width: 20%;" class="wikitable"
! Budget Year
| 2022
|-
! Last Maintained
| 10/18/22
|}

== Current Data ==

{| class="wikitable sortable"
! Area
! Total Budget
! Spent Budget
! Card Status
! Last Updated
! Notes
|-
| CNC
| 9813
| 1254.82
| Active
| 10/18/22
| None
|-
| Lasers
| 5550
| 1594.54
| None
| 10/18/22
| None
|-
| 3D Printing
| 6645
| 6507.08
| Active
| 10/18/22
| None
|-
| Specialty Printing
| 0
| 0
| None
| 10/18/22
| None
|-
| 2D Printing
| 1700
| 49.49
| Ordered
| 10/18/22
| None
|-
| Electronics
| 4635
| 906.44
| Active
| 10/18/22
| None
|-
| Arts
| 5400
| 4454.23
| Active
| 10/18/22
| None
|-
| Hot Metals
| 8250
| 8351.48
| Active
| 10/18/22
| None
|-
| Kitchen
| 3600
| 1177.61
| Active
| 10/18/22
| None
|-
| Cold Metals
| 5400
| 995.08
| Active
| 10/18/22
| None
|-
| Woodshop
| 11550
| 7333.85
| Ordered
| 10/18/22
| None
|-
| Small Metals
| 4300
| 463.10
| Active
| 10/18/22
| None
|-
| Public Relations
| 1700
| 98.94
| Active
| 10/18/22
| None
|-
| CTO
| 12069
| 9293.85
| Active
| 10/18/22
| None
|-
| General Operations
| 38440
| 20452.55
| Active
| 10/18/22
| Hard to track likely wrong.
|}

Get Help

2022-09-27T02:33:55Z

Aerishay:

== Email Lists ==

* Public E-mail: info@pumpingstationone.org:
** This sends an email to Freshdesk, the ticketing system we use, which is supported by several different people.

* DISCOURSE -- The discourse instance at https://discourse.pumpingstationone.org/ is our current discussion board venue. It provides both public and confidential channels for PS1 members and operations. It is channelized by area and major function. New members are automatically added to appropriate channels on request. (Info @ pumpingstationone.org)

* The old google venue for communications channels has been retired. Old posts are archived but no further discussion is open on google. Please use discourse. [http://groups.google.com/group/pumping-station-one-public Pumping Station: One Google Group - public list] - For general hacker / maker content and announcements to, discussions with, or questions from, non-members.
* If you need to contact the board of directors privately you should email directors-only@pumpingstationone.org

== Social Networks ==
* Twitter:
** Official Account: [http://twitter.com/@pumpingstation1 @pumpingstation1]
** Mascot Carl: [http://twitter.com/@carrrl @carrrl]
** Hashtag [http://twitter.com/#search?q=%23psone312 #psone312]
* Facebook:
** Page: https://www.facebook.com/PumpingStationOne
** Group: http://www.facebook.com/group.php?gid=43740233740 (defunct, not actively managed by us anymore)
* Flickr: http://flickr.com/groups/pumpingstationone
* Instagram: https://www.instagram.com/pumpingstationone/
* Vimeo: https://vimeo.com/psone/videos
* [[Meetup]]

== Links ==
* Website: [http://pumpingstationone.org/ http://pumpingstationone.org/]
* Blog: [http://pumpingstationone.org/ http://pumpingstationone.org/] Members are encouraged to post to our blog.
* [[Wiki]]: [http://wiki.pumpingstationone.org http://wiki.pumpingstationone.org/]
* GitHub: [https://github.com/pumpingstation1 https://github.com/pumpingstation1]
* Thingiverse: [https://www.thingiverse.com/groups/pumping-station-one https://www.thingiverse.com/groups/pumping-station-one]
* [[IRC]]: #pumpingstationone on irc.libera.chat
* [[Slack]]: https://pumpingstationone.slack.com
* Trello: https://trello.com/pumpingstationone
* Other Hackerspaces: http://hackerspaces.org/wiki/Hackerspaces
* Spaces We've Worked With:
** [http://www.tvbgone.com/cfe_tvbg_main.php Mitch Altman] of [https://www.noisebridge.net/wiki/Noisebridge Noisebridge ''San Francisco'']
** [http://www.i3detroit.com/ i3 Detroit]
** [http://www.c3kc.org/ CCCKC ''Kansas City'']

== Phone Numbers ==
[[Who To Call]]

In case of emergency, you should probably call 911 or 311, depending on the severity.

If you call 911 or 311, please write into board@ or info@pumpingstationone.org to let us know what has happened. We like knowing what has happened.

In case of emergency that is confusing and non-fatal such that you are uncomfortable calling emergency lines, you may call or text The Vulture. Possibly call and text The Vulture. (260) 358 - 7321

Category:2D Printing

2022-09-21T01:28:47Z

Aerishay:

{{Infobox HostedArea
| image = Equipment-no-photo.jpg
| areaname = 2D Printing
| location = Some on First and Second Floor
| toolcategory =
| hostname = Davis Sayer
| hostphone =
| hostemail =2dprinting@pumpingstationone.org
| hostother =
| hosthours =
| hostcerts =
}}

== Rules ==

Please put supplies and tools back when you are done. Do not fuck shit up.

== Certifications ==

* Large Format Printer Authorizations must be scheduled
* Viral authorizations for the vinyl cutter
* Other printers do not require authorizations (excluding the sublimation printer, which is under graphic arts and textiles)

[[Category:Hosted Areas]]
[[Category:Member Manual]]
[[Category:Equipment]]
[[Category:Projects]]
[[Category:Tutorials]]

Category:2D Printing

2022-09-21T01:26:07Z

Aerishay:

{{Infobox HostedArea
| image = Equipment-no-photo.jpg
| areaname = 2D Printing
| hostedsince =
| location = Some on First and Second Floor
| toolcategory =
| hostname = Davis Sayer
| hostphone =
| hostemail =2dprinting@pumpingstationone.org
| hostother =
| hosthours =
| hostcerts =
}}

== Rules ==

Please put supplies and tools back when you are done. Do not fuck shit up.

== Certifications ==

* Large Format Printer Authorizations must be scheduled
* Viral authorizations for the vinyl cutter
* Other printers do not require authorizations (excluding the sublimation printer, which is under graphic arts and textiles)

[[Category:Hosted Areas]]
[[Category:Member Manual]]
[[Category:Equipment]]
[[Category:Projects]]
[[Category:Tutorials]]

Category:Wood Shop

2022-09-21T01:24:50Z

Aerishay:

The Wood Shop is one of the areas that has an area host here at PS:One. https://wiki.pumpingstationone.org/Category:Hosted_Areas

{{Infobox HostedArea
| image = 9473142111_c9f6058202_b.jpg
| areaname = Woodshop
| hostedsince =
| location = South-east corner
| toolcategory = [[:Category:Shop Equipment]]
| hostname = Sam Paris
| hostemail = woodshop@pumpingstationone.org
| slack handle = @samparis
| slack channel = @woodshop
}}

== Area Rules ==

<ol>
<li>Safety first — use at minimum all required safety gear for the tool you are using. Always wear safety glasses. Worn alone, your acrylic eyeglass lenses are dangerous. Know where the closest fire extinguisher is as well as the first aid kit. And pay attention to what you are doing. For your own safety, do not work around people misusing tools. For the safety of others, don't misuse tools. It's Ok to ask others for help, people are pretty friendly (but it's good etiquette to wait if they're using powertools).</li>
<li>Clean up after yourself — use a brush or the Shop Vac to clean up your chips and throw small cutoffs away. Set useful cutoffs aside in the lumber area if you think someone might be able to use them (but we reallllly don't want your garbage). Make sure power cords don't obstruct aisles</li>
<li> Check the '''Dust Collector''' [https://wiki.pumpingstationone.org/Dust_Collector_G0638]to see if it needs emptying </li>
<li>Be respectful of others using this space by following [[Tidy Space Policy|TidySpace]] procedures — always fill out a Parking Request form — Name, phone number, email, and date it each time you work on it.</li>
<li>Put things back when you're done — Let's try to make sure everyone can find the tool they are looking for once you are finished. This includes all power tool accessories and hand tools.</li>
<li>Respect all the tools — Do not '''''ever''''' put your weight behind a piece you're feeding through any power tool. If you ''ever'' see anyone doing this, it's Ok to correct them. Use your hands or a push stick, if appropriate, to move your piece through — the machine will tell you how quickly it wants to work. '''Only use tools you are certified to use.'''</li>
<li>If something breaks, put a note on it and contact the Area Host, don't just leave it for the next person to find. It's unsafe and disrespectful. Be excellent to each other.</li>
<li>Make awesome things and let us know if you'd like to boast.</li>
</ol>

== Authorizations ==

There is usually a Wood Shop authorization once a week, listed on the calendar. The process begins in a canvas course. Go to https://canvas.pumpingstationone.org/courses/40 and self enroll. There are readings on safety, processes rules and... of course... all of the stationary tools in the basic authorization. Study the material and take the quizzes.

Then book a hands on Authorization session in the Canvas Calendar. Out of courtesy please email Ralph (rebrendler@gmail.com, Paul (paulvanlake @gmail.com) or Gary (grnewhouse@gmail.com)as appropriate for questions (to let us know that you are in the pipeline, questions, etc).

If you pass both the online and the hands on portions....CONGRATULATIONS!! You are among the select club of PS:1 Woodworkers (no accompanying parties or awards or libations will necessarily follow.)

Come wearing appropriate clothing and grab a set of eye protection and ear protection when you arrive.
It's extremely likely that this authorization will meet every Thursday at 7:30 pm ... in the Wood Shop see the ps:1 google calendar.

Only approved proctors may authorize and for the beginning of this new process, Ralph or Paul will lead your HandsOn session. Proctors are identified on the wiki page for each tool requiring authorization. See generally at the bottom of this page [[:Category:Wood Shop]] for a list.

=== Woodshop host and deputies ===
vacant - host

Authorizers: https://wiki.pumpingstationone.org/Volunteer_Positions#Woodshop_Authorizers

All authorizers have chosen particular tools to become "experts" on. - Woodshop Tool Tuners Team

Ian Sampson - Authorizer, Wiki, Canvas Courses maintenance and improvement
Gary Newhouse - General Operations Team - Wood Shop Storage manager, Canvas Master Teacher grnewhouse@gmail.com 847-666-5301

=== Project Storage ===

'''New tidy space policy. '''

We need to more closely follow PS1 Tidy Space Policy, things are just too crowded and too many "abandoned" projects are using space that should be for authorized temporary storage (up to 30 days). Michelle DeLeon (pistola13d@gmail.com) and Gary Newhouse(grnewhouse@gmail.com) are working to clear up space for you to store your "masterpieces in process".

'''Parking Permit'''

What it is

This green tag* should be placed on any item, project or materials used for personal or group projects, which are being actively worked and/or are too large to store in personal locker/shelf space. Items with a properly issued parking permit must not be left on a worktable or in a walkway. Items that are left with or without a Parking Permit may be moved to Temporary Storage by anyone at any time. Members are able to write their own ticket for parking, valid for a maximum of 72 hours unless an Area Host agrees to a longer period of time not exceeding 30 days. Members are able to renew Parking Permits themselves given that they are physically in at PS1 to do so. Area Hosts are able to limit renewals at their discretion if appropriate to maintain organization of Temporary Storage.

'''Parking Ticket'''

What it is

Red tickets (https://github.com/pumpingstationone/ps1-design/blob/master/export/red-parking-tag.pdf) should be placed on any item, project, or materials found in the space without a permit or with an improperly filled or expired permit. If materials are obstructing a walkway, common work areas or work surfaces, or is otherwise stored in a manner that is a hindrance of the use of PS1 by other members, anyone is able to respectfully move items to Temporary Storage where an authorized person will ticket items if they are unclaimed. As stated above, items must be labeled with a Parking Pass and stored properly when not actively being worked on. Personal storage is exempted from the Parking Ticket process and improperly utilized personal storage is covered in its own section below.

What happens to ticketed items?

The ticket can be struck by the issue of a valid parking permit, or in the case of space property, proper labeling and storage. Ticketed material may be moved out of the way or placed in Temporary Storage, but must not be moved to Salvage until the 72 hours after the ticket is issued. The issuer, and/or Area Host, accepts the obligation to make a good-faith effort to contact the person responsible for the material (if known) to let them know their material should be retrieved or marked with a valid parking permit. If the owner is legitimately unavailable to take care of their materials within the 72 hours, the issuer and/or Area Host may make arrangements with the owner at their discretion, but are under no obligation to do so.

'''Salvage'''

What it is?

Salvage is a clearly marked and well lit set of shelves dedicated to almost-trash. The designated spaces are:

:#the rightmost portion of the plywood rack,

The area immediately right of that is now for storage of four PS1 owned ladders

Anyone may remove anything from Salvage at any time.

We are in the process of implementing this in the Woodshop. We will make every effort to make this transition as easy as possible ..

Gary for the WS tidy space team

''Old WS tidy space guidelines''

<ol<s>
<li>''Projects too large for your locker cannot be left in the shop in a manner that makes any tool unusable. (If you have to store your project in the shop, find an out of the way place for it).''</li>
<li>''You '''must''' follow [[Tidy Space Policy|TidySpace]] procedures and fill out a Parking Request form with your name, phone number, and email on your project and any materials that belong to you. Every time you work on it, write the date on your label so the area host knows you haven't abandoned it.''</li>
<li>''If a project is untouched for 30 days, the project will be considered abandoned and be made available to the membership as scrap or thrown away.''</li>
<li>''Your project may not be stored in the space for more than '''60 days TOTAL time''', whether you worked on it daily or once every other week.''</li>

</ol>
''For best results, have all the materials on hand when you start a project and set aside time to finish it quickly so we don't have projects laying all over the shop, half done, for months.''</s>

== Safety ==
Some safety equipment is currently available:

* safety glasses and goggles
* gloves (including welding gloves)
* respirator
* ear protection
* painter suits
* welding masks
* fire extinguishers

Users must use this equipment as required for each tool.

If you see someone using the equipment improperly, '''wait for a safe time''' to either show them how to do it right, or ask them to stop and seek certification. Don't sneak up on people or interrupt them while they're using power tools. Notify the Area Host if anyone is abusing, damaging, or using tools in an inappropriate fashion.

If the smoke/CO2 detector goes off, stop what you are doing. Do not shut it off and go back to work until you take a break for at least 15 minutes to be sure there aren't any harmful fumes.

== Woodworking skills ==

'''Milling lumber''' To produce the quality joints needed for strong and attractive projects, the natural warping and twist of lumber must be dealt with. The typical process for producing milled lumber starts at the jointer.
<ol>
<li> Joint a face and an edge, using the jointer fence. This will give you two surfaces that are 90 degrees to each other.
<li> Then use the planer to make the unmilled face parallel and coplanar to the face milled in the first step.
<li> The final edge can be produced on the table saw. Use the rip fence to clean up the final edge.
</ol>
More techniques for milling lumber can be found in [http://www.thewoodwhisperer.com/videos/episode-6-the-jointers-jumpin/?category_name=techniques this video] from Marc Spagnuolo, a woodworking podcaster of note.

== Tools Available ==

All equipment in the workshop has been tagged [[:Category:Shop Equipment]].

All equipment requires certification to be used. Please see the individual tool pages for information on who can certify you to use these tools.

=== Using the tools ===

If it belongs to PS:One, please be nice to the tools. If they belong to a member who is awesome enough to loan us their personal gear, make sure you treat it extra nice and also, get their permission first.

Please be respectful and aware of others working in the shop at the same time you are. If you are throwing sparks, throw them away from other people. If you are walking around with hot metal, say something so others know where you are and don't get branded. If you are going to start making a lot of noise, let other people know so they can get some ear protection, don't just deafen them.

=== Sharpening tools ===

Sharpening is best left to people who know what they're doing. Destroying an edge or a tool's temper will require someone else to deal with the problem, and that sucks. If you know what you're doing, you'll know what you need and can ask someone who also looks like they know what they're doing to help you find it.

Sharpening power tool blades is even more best left to people who know what they're doing. Let the area host know if a power tool's blades need to be serviced.

== Shop Safety Best Practices ==

Pumping Station: One is not responsible for making sure you operate tools safely. This wiki is edited by volunteers who ''do not speak for Pumping Station:One.'' For a primer on general shop safety best practices, have a look at [http://www.epa.gov/dfe/pubs/auto/bestpractices/bestpr.htm the EPA's recommendations] and [https://www.pratt.edu/uploads/Shop_Orientation_Manual.pdf Pratt's orientation manual]. Various A&M schools also have excellent recommendations.

== Budgets ==

We are working on a real time accounting of budgets and expenditures.

[https://docs.google.com/spreadsheets/d/1y_PDi-ZZuNAnfpsWlKM05dCU4v_T1DBXaOsmj2Wj1L8/edit 2020 Budget].

[https://docs.google.com/spreadsheets/d/1Aj134nfegxVlrsYCF4GUSk5tZ469yam0U5-pFQzngPE/edit#gid=1955275037 2021 area budget]

[https://docs.google.com/spreadsheets/d/1iRsp3CosWld3G8h4T4yPPmLo8G-f_GjH5ge6klmgHNY/edit?pli=1#gid=1955275037 2022 area budget]

== Wood Shop Improvement Projects ==

The Wood Shop has lots of ongoing improvement projects to help organize and de-clutter the workspace - feel free to help out!

* fix rolling fire door rail (roll door to right, replace missing bolts holding rail to wall will bring that rail plumb again, test)

* straighten out door counterweight cover to left of rolling fire door (remove appx six lag bolts, take cover off, beat the shit outa it to make it square, replace it on wall).

* repair left dust collector door. (Remove stop from top rail, roll door to left to free the center trolley, tighten nuts to relevel/plumb door so that it is plumb-relative to right door, replace end stop)

* use hydraulic cement or such to reattach rolling door rails to wall in dock. There are new bolts there but existing old bolts need to be reattached to wall at right side

* DONE Finish hooking up the dust collection
* DONE Repair the floor on the flat sheet vertical rack (the bottom is broken) and through away the junk and edit the ticketed items.
* DONE Incorporate a rack for tall sticks of lumber ( 8ft. 2x4's, long rips of narrow material).
* DONE Reorganize "salvage" material storage
** NOW: right quarter of ply rack,
*** small pieces to right of ply rack,

* DONE Get the [[Bosch Sliding Compound Miter Saw]] station built.
* DONE Build GoogleCal for Major tool Preventive Maintenance with Mfg. recommendations for maintenance tasks
* DONE Jigs and fences for the [[Rockwell Delta 20" Bandsaw]].
* DONE Plumb in some air lines. Paul Van Lake anchored the line on the wall next to the ladders so maybe we can tap off of that.
* Shop signs. If a member is looking for a practice project post laser or ShopBot authorization, have them make pertinent/helpful tool and warning signs.
* DONE Go through the cabinet under the miter saw and clean out the junk glue and useless material.
* DONE Build shelves under work benches for member projects once racks are made to store glue clamps.
* DONE Design a better method to store the clamps that are in bins on the floor.
* DONE Fix the cable on the [[Grizzly 6" jointer]] - the ground wire is exposed.
* DONE Fix the plugs on the northwest wall. They are hanging and it is hard sometimes to plug in the jointer without the cable falling off.
* Build an enclosed cabinet for the router table to prevent dust and organize bits and tools.
* DONE Add racks above sanders router and drill press
* Repair replace worktables
* DONE prepare vote for new equipment (SawStop, lathe, racks) TO BE DELIVERED /INSTALLED DEC. (SAW, RACKS)and jan.(lathe)

[[Category:Hosted Areas]]
[[Category:Member Manual]]
[[Category:Equipment]]
[[Category:Projects]]
[[Category:Tutorials]]

Volunteer Positions

2022-09-21T01:23:43Z

Aerishay: /* Woodshop */

The Board of Directors has designated the following official Volunteer Positions. See [[Area Hosts and Volunteer Positions Policy]] for more information. See also [[:Category:Hosted Areas|Area Hosts]] for a list of Area Hosts.

= Volunteer Positions =

==== Responsibilities ====
*Each Volunteer's roles may vary. These volunteers serve to assist in the general maintenance of the space and community in conjunction with specific Area Hosts.

== Area Hosts ==
''Main article: [[Area Hosts]]''

=== 2D Printers ===
* Davis Sayer
** email: 2dprinting [at] pumpingstationone [dot] org
** slack handle: davissayer

=== 3D Printing ===
* Matt Keith - Hardware/Software Upgrades & Maintenance
** email: 3dprinting [at] pumpingstationone [dot] org
* Sam Donahue - Authorizations
** email: 3dprinting [at] pumpingstationone [dot] org
** slack handle: @Sam Donahue
** slack channels
***3d_layers

=== Arts & Crafts ===
* Lydia Miller
** email: arts [at] pumpingstationone [dot] org
** slack handle: @Lydia Miller

=== CNC Machining ===
* Adam Molski
** email: cnc [at] pumpingstationone [dot] org
** slack handle: @MikeThompson
** slack channels
***fusion-360
***cad-cam
***cnc
***tormach_user_group

=== Cold Metals ===
* Jim Brink
** email: coldmetals@pumpingstationone.org
** email: 2010jfb[at] gmail [dot] com
** slack handle: @Jim Brink
** slack channels
***coldmetals

=== Electronics ===
* Andrew Wingate
** email: electronics@pumpingstationone [dot]
** slack handle: @Anna Yu
** slack channels
***electronics

=== Gen Ops ===
* Andrew Morris
** email: GenOps [at] pumpingstationone [dot] org
** slack handle: @morrand

=== Hot Metals ===
* Ron Olson
** email: hotmetals [at] pumpingstationone [dot] org
** slack handle: @tackoknight
** slack channels
***hotmetalshop

=== Kitchen ===
* Ashley Shewmaker
** email: kitchen [at] pumpingstationone [dot] org
** slack handle: @kitschwitch
**slack channels
***kitchen

=== Lasers ===
* Ash Jasani
** email: lasers [at] pumpingstationone [dot] org
** slack handle: @Ash
** slack channels
***lasers

=== Small Metals ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally
** slack channels
***small-metals

=== Woodshop ===
* Sam Paris
** email: woodshop [at] pumpingstationone [dot] org
** slack handle:
** slack channels
***woodshop

=== Events Coordinator ===
* Contact: [[user:lyn|Lyn Cole]]
** email: parties {at} pumpingstationone [dot] org
** slack handle: @LynPurple

== Authorizers ==
''Main article: [[Volunteer Authorizer]]''

Getting authorized on tools can be tough. Sometimes it's hard for new members to figure out how to get authorized, sometimes classes fill up in hours, sometimes classes aren't scheduled regularly. We want to fix that. The Board has created the following Volunteer Positions. We need a few members to step up and offer their time to get people authorized.

==== Responsibilities and Incentives ====

* Another page with a description of volunteer authorizer positions is here https://wiki.pumpingstationone.org/Volunteer_Authorizer

=== CNC Authorizer ===
* Shopbot: David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David
* Tormach: Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* Boss Laser: Jeff Zelnio
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Jeffz
* Boss Laser: Andrew Camardella
** email: laser-auths@pumpingstationone [dot] org
** slack handle: @rtystgeeke
* Universal Laser: Ash Jasani
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Ash
* Universal Laser: Esty Wexler
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Esty Wexler

=== Hot Metals Authorizers ===
* Daron Wooding
** email: daron.wooding [at] gmail [dot] com
* Aaron Feigen
**email: aaronfeigen [at] gmail [dot] com
** slack handle: @nibbtastic
* Jacob Dawson
**email: ps1@jmdawson [dot] net
** slack handle: @Jacob M. Dawson
* Sean Blum
**email: arthifflaw [at] gmail [dot] com
** slack handle: @Sean Blum

=== Cold Metals Authorizers ===
==== Basic Authorization: Tier 1 ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* [[User:mct|McTavish McArdle]]
** (preferred) email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== LeBlond Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Clausing Lathe ====
* Anna Yu
** email: annotatehere [at] gmail [dot] com

==== Bridgeport Knee Mill ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== Grizzly Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== Surface Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Baldor Tool Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel

=== Small Metals Authorizer ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally

=== Tormach Authorizers ===
* Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David

=== Woodshop Authorizers and maintenance. ===
*Gary Newhouse - shop storage, wiki, Canvas course manager
** email Gnewhouse @ gmail dot com
**slack handle @garynhouse

* Ralph Brendler - General auth, mortise and tenon jigs, and multi-router
** email: rebrendler [at] gmail [dot] com
** slack handle: @Ralph Brendler

*David Earl
** slack handle @david earl

*Tim Kaye
** slack handle: @Tim

* Joseph Staffa
** Slack handle : @joseph Staffa

* Ian Sampson -general Auth, maintenance, wiki, Canvas courses

* Brenda Caflin -General Auth , maint,

* Jim Leonardson - small tool maintenance

*dan Ennion - general Auth, maintenance.

* Dan Walsh

* Brendan Twaddell

* Donzell Gordon - Woodshop Lathe Only
** email: donzellphoto [at] gmail [dot] com
** slack handle: @Donzell007

* Sam Paris. Maintenance team

* Tim Kaye. Maintenance team

=== Membership Management Team (MMT) ===
* Team Lead: Vacant
** email: mmt [at] pumpingstationone [dot] org
** slack handle:
* Scholarship Liason: Nathan Upchurch
** email: scholarships [at] pumpingstationone [dot] org
** slack handle: @Nathan U
* Member: Scott Yoder
** email: mmt [at] pumpingstationone [dot] org
** slack handle: @Scott yoder

=== General Operations (GenOps) ===

All are generalists but each has a primary responsibility.

* Team Lead: Andrew Morris
** email: genops [at] pumpingstationone [dot] org
** slack handle: @morrand
* Woodshop Storage Manager: Gary Newhouse
** email: genops [at] pumpingstationone [dot] org
** slack handle: @GARYn
* other areas storage manager : Sean Blum
** email: genops [at] pumpingstationone [dot] org
** slack handle: @Sean Blum
*operations Liason: Brian Desmond
** slack handle: @Brian D
* operations advisor: Brian Barnt
** slack handle: @Bbarnt

== Board-Appointed Officers ==

=== Chief Technology Officer ===
* Name: Sky Nova
** email: cto@pumpingstationone [dot] org
** slack handle: @Sky

=== Education Officer ===
* Name: currently vacant

=== Communications/PR ===
* Name: Alicia Johnson
** email: press [at] pumpingstationone [dot] org pr@pumpingstationone [dot] org
** slack handle:

=== Treasurer ===
* Name: Carl Karsten
** email: treasurer [at] pumpingstationone [dot] org

== Board of Directors ==
* President: Paul Ocampo
* Vice President: Nathan Upchurch
* Secretary: Joe Mertz
* Director-at-Large: Tim Bielawa
* Director-at-Large: Donzell Gordon
* Director-at-Large:Jennie Plasterer
* Director-at-Large: Fidel Galano
* Director-at-Large: Jesse Seay

Volunteer Positions

2022-09-21T01:23:10Z

Aerishay: /* 2D Printers */

The Board of Directors has designated the following official Volunteer Positions. See [[Area Hosts and Volunteer Positions Policy]] for more information. See also [[:Category:Hosted Areas|Area Hosts]] for a list of Area Hosts.

= Volunteer Positions =

==== Responsibilities ====
*Each Volunteer's roles may vary. These volunteers serve to assist in the general maintenance of the space and community in conjunction with specific Area Hosts.

== Area Hosts ==
''Main article: [[Area Hosts]]''

=== 2D Printers ===
* Davis Sayer
** email: 2dprinting [at] pumpingstationone [dot] org
** slack handle: davissayer

=== 3D Printing ===
* Matt Keith - Hardware/Software Upgrades & Maintenance
** email: 3dprinting [at] pumpingstationone [dot] org
* Sam Donahue - Authorizations
** email: 3dprinting [at] pumpingstationone [dot] org
** slack handle: @Sam Donahue
** slack channels
***3d_layers

=== Arts & Crafts ===
* Lydia Miller
** email: arts [at] pumpingstationone [dot] org
** slack handle: @Lydia Miller

=== CNC Machining ===
* Adam Molski
** email: cnc [at] pumpingstationone [dot] org
** slack handle: @MikeThompson
** slack channels
***fusion-360
***cad-cam
***cnc
***tormach_user_group

=== Cold Metals ===
* Jim Brink
** email: coldmetals@pumpingstationone.org
** email: 2010jfb[at] gmail [dot] com
** slack handle: @Jim Brink
** slack channels
***coldmetals

=== Electronics ===
* Andrew Wingate
** email: electronics@pumpingstationone [dot]
** slack handle: @Anna Yu
** slack channels
***electronics

=== Gen Ops ===
* Andrew Morris
** email: GenOps [at] pumpingstationone [dot] org
** slack handle: @morrand

=== Hot Metals ===
* Ron Olson
** email: hotmetals [at] pumpingstationone [dot] org
** slack handle: @tackoknight
** slack channels
***hotmetalshop

=== Kitchen ===
* Ashley Shewmaker
** email: kitchen [at] pumpingstationone [dot] org
** slack handle: @kitschwitch
**slack channels
***kitchen

=== Lasers ===
* Ash Jasani
** email: lasers [at] pumpingstationone [dot] org
** slack handle: @Ash
** slack channels
***lasers

=== Small Metals ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally
** slack channels
***small-metals

=== Woodshop ===
* David Sayer
** email: woodshop [at] pumpingstationone [dot] org
** slack handle: davissayer
** slack channels
***woodshop

=== Events Coordinator ===
* Contact: [[user:lyn|Lyn Cole]]
** email: parties {at} pumpingstationone [dot] org
** slack handle: @LynPurple

== Authorizers ==
''Main article: [[Volunteer Authorizer]]''

Getting authorized on tools can be tough. Sometimes it's hard for new members to figure out how to get authorized, sometimes classes fill up in hours, sometimes classes aren't scheduled regularly. We want to fix that. The Board has created the following Volunteer Positions. We need a few members to step up and offer their time to get people authorized.

==== Responsibilities and Incentives ====

* Another page with a description of volunteer authorizer positions is here https://wiki.pumpingstationone.org/Volunteer_Authorizer

=== CNC Authorizer ===
* Shopbot: David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David
* Tormach: Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* Boss Laser: Jeff Zelnio
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Jeffz
* Boss Laser: Andrew Camardella
** email: laser-auths@pumpingstationone [dot] org
** slack handle: @rtystgeeke
* Universal Laser: Ash Jasani
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Ash
* Universal Laser: Esty Wexler
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Esty Wexler

=== Hot Metals Authorizers ===
* Daron Wooding
** email: daron.wooding [at] gmail [dot] com
* Aaron Feigen
**email: aaronfeigen [at] gmail [dot] com
** slack handle: @nibbtastic
* Jacob Dawson
**email: ps1@jmdawson [dot] net
** slack handle: @Jacob M. Dawson
* Sean Blum
**email: arthifflaw [at] gmail [dot] com
** slack handle: @Sean Blum

=== Cold Metals Authorizers ===
==== Basic Authorization: Tier 1 ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* [[User:mct|McTavish McArdle]]
** (preferred) email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== LeBlond Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Clausing Lathe ====
* Anna Yu
** email: annotatehere [at] gmail [dot] com

==== Bridgeport Knee Mill ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== Grizzly Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== Surface Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Baldor Tool Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel

=== Small Metals Authorizer ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally

=== Tormach Authorizers ===
* Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David

=== Woodshop Authorizers and maintenance. ===
*Gary Newhouse - shop storage, wiki, Canvas course manager
** email Gnewhouse @ gmail dot com
**slack handle @garynhouse

* Ralph Brendler - General auth, mortise and tenon jigs, and multi-router
** email: rebrendler [at] gmail [dot] com
** slack handle: @Ralph Brendler

*David Earl
** slack handle @david earl

*Tim Kaye
** slack handle: @Tim

* Joseph Staffa
** Slack handle : @joseph Staffa

* Ian Sampson -general Auth, maintenance, wiki, Canvas courses

* Brenda Caflin -General Auth , maint,

* Jim Leonardson - small tool maintenance

*dan Ennion - general Auth, maintenance.

* Dan Walsh

* Brendan Twaddell

* Donzell Gordon - Woodshop Lathe Only
** email: donzellphoto [at] gmail [dot] com
** slack handle: @Donzell007

* Sam Paris. Maintenance team

* Tim Kaye. Maintenance team

=== Membership Management Team (MMT) ===
* Team Lead: Vacant
** email: mmt [at] pumpingstationone [dot] org
** slack handle:
* Scholarship Liason: Nathan Upchurch
** email: scholarships [at] pumpingstationone [dot] org
** slack handle: @Nathan U
* Member: Scott Yoder
** email: mmt [at] pumpingstationone [dot] org
** slack handle: @Scott yoder

=== General Operations (GenOps) ===

All are generalists but each has a primary responsibility.

* Team Lead: Andrew Morris
** email: genops [at] pumpingstationone [dot] org
** slack handle: @morrand
* Woodshop Storage Manager: Gary Newhouse
** email: genops [at] pumpingstationone [dot] org
** slack handle: @GARYn
* other areas storage manager : Sean Blum
** email: genops [at] pumpingstationone [dot] org
** slack handle: @Sean Blum
*operations Liason: Brian Desmond
** slack handle: @Brian D
* operations advisor: Brian Barnt
** slack handle: @Bbarnt

== Board-Appointed Officers ==

=== Chief Technology Officer ===
* Name: Sky Nova
** email: cto@pumpingstationone [dot] org
** slack handle: @Sky

=== Education Officer ===
* Name: currently vacant

=== Communications/PR ===
* Name: Alicia Johnson
** email: press [at] pumpingstationone [dot] org pr@pumpingstationone [dot] org
** slack handle:

=== Treasurer ===
* Name: Carl Karsten
** email: treasurer [at] pumpingstationone [dot] org

== Board of Directors ==
* President: Paul Ocampo
* Vice President: Nathan Upchurch
* Secretary: Joe Mertz
* Director-at-Large: Tim Bielawa
* Director-at-Large: Donzell Gordon
* Director-at-Large:Jennie Plasterer
* Director-at-Large: Fidel Galano
* Director-at-Large: Jesse Seay

Volunteer Positions

2022-09-21T01:21:11Z

Aerishay: /* CNC Authorizer */

The Board of Directors has designated the following official Volunteer Positions. See [[Area Hosts and Volunteer Positions Policy]] for more information. See also [[:Category:Hosted Areas|Area Hosts]] for a list of Area Hosts.

= Volunteer Positions =

==== Responsibilities ====
*Each Volunteer's roles may vary. These volunteers serve to assist in the general maintenance of the space and community in conjunction with specific Area Hosts.

== Area Hosts ==
''Main article: [[Area Hosts]]''

=== 2D Printers ===
TBD

=== 3D Printing ===
* Matt Keith - Hardware/Software Upgrades & Maintenance
** email: 3dprinting [at] pumpingstationone [dot] org
* Sam Donahue - Authorizations
** email: 3dprinting [at] pumpingstationone [dot] org
** slack handle: @Sam Donahue
** slack channels
***3d_layers

=== Arts & Crafts ===
* Lydia Miller
** email: arts [at] pumpingstationone [dot] org
** slack handle: @Lydia Miller

=== CNC Machining ===
* Adam Molski
** email: cnc [at] pumpingstationone [dot] org
** slack handle: @MikeThompson
** slack channels
***fusion-360
***cad-cam
***cnc
***tormach_user_group

=== Cold Metals ===
* Jim Brink
** email: coldmetals@pumpingstationone.org
** email: 2010jfb[at] gmail [dot] com
** slack handle: @Jim Brink
** slack channels
***coldmetals

=== Electronics ===
* Andrew Wingate
** email: electronics@pumpingstationone [dot]
** slack handle: @Anna Yu
** slack channels
***electronics

=== Gen Ops ===
* Andrew Morris
** email: GenOps [at] pumpingstationone [dot] org
** slack handle: @morrand

=== Hot Metals ===
* Ron Olson
** email: hotmetals [at] pumpingstationone [dot] org
** slack handle: @tackoknight
** slack channels
***hotmetalshop

=== Kitchen ===
* Ashley Shewmaker
** email: kitchen [at] pumpingstationone [dot] org
** slack handle: @kitschwitch
**slack channels
***kitchen

=== Lasers ===
* Ash Jasani
** email: lasers [at] pumpingstationone [dot] org
** slack handle: @Ash
** slack channels
***lasers

=== Small Metals ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally
** slack channels
***small-metals

=== Woodshop ===
* David Sayer
** email: woodshop [at] pumpingstationone [dot] org
** slack handle: davissayer
** slack channels
***woodshop

=== Events Coordinator ===
* Contact: [[user:lyn|Lyn Cole]]
** email: parties {at} pumpingstationone [dot] org
** slack handle: @LynPurple

== Authorizers ==
''Main article: [[Volunteer Authorizer]]''

Getting authorized on tools can be tough. Sometimes it's hard for new members to figure out how to get authorized, sometimes classes fill up in hours, sometimes classes aren't scheduled regularly. We want to fix that. The Board has created the following Volunteer Positions. We need a few members to step up and offer their time to get people authorized.

==== Responsibilities and Incentives ====

* Another page with a description of volunteer authorizer positions is here https://wiki.pumpingstationone.org/Volunteer_Authorizer

=== CNC Authorizer ===
* Shopbot: David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David
* Tormach: Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* Boss Laser: Jeff Zelnio
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Jeffz
* Boss Laser: Andrew Camardella
** email: laser-auths@pumpingstationone [dot] org
** slack handle: @rtystgeeke
* Universal Laser: Ash Jasani
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Ash
* Universal Laser: Esty Wexler
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Esty Wexler

=== Hot Metals Authorizers ===
* Daron Wooding
** email: daron.wooding [at] gmail [dot] com
* Aaron Feigen
**email: aaronfeigen [at] gmail [dot] com
** slack handle: @nibbtastic
* Jacob Dawson
**email: ps1@jmdawson [dot] net
** slack handle: @Jacob M. Dawson
* Sean Blum
**email: arthifflaw [at] gmail [dot] com
** slack handle: @Sean Blum

=== Cold Metals Authorizers ===
==== Basic Authorization: Tier 1 ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* [[User:mct|McTavish McArdle]]
** (preferred) email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== LeBlond Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Clausing Lathe ====
* Anna Yu
** email: annotatehere [at] gmail [dot] com

==== Bridgeport Knee Mill ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== Grizzly Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== Surface Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Baldor Tool Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel

=== Small Metals Authorizer ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally

=== Tormach Authorizers ===
* Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David

=== Woodshop Authorizers and maintenance. ===
*Gary Newhouse - shop storage, wiki, Canvas course manager
** email Gnewhouse @ gmail dot com
**slack handle @garynhouse

* Ralph Brendler - General auth, mortise and tenon jigs, and multi-router
** email: rebrendler [at] gmail [dot] com
** slack handle: @Ralph Brendler

*David Earl
** slack handle @david earl

*Tim Kaye
** slack handle: @Tim

* Joseph Staffa
** Slack handle : @joseph Staffa

* Ian Sampson -general Auth, maintenance, wiki, Canvas courses

* Brenda Caflin -General Auth , maint,

* Jim Leonardson - small tool maintenance

*dan Ennion - general Auth, maintenance.

* Dan Walsh

* Brendan Twaddell

* Donzell Gordon - Woodshop Lathe Only
** email: donzellphoto [at] gmail [dot] com
** slack handle: @Donzell007

* Sam Paris. Maintenance team

* Tim Kaye. Maintenance team

=== Membership Management Team (MMT) ===
* Team Lead: Vacant
** email: mmt [at] pumpingstationone [dot] org
** slack handle:
* Scholarship Liason: Nathan Upchurch
** email: scholarships [at] pumpingstationone [dot] org
** slack handle: @Nathan U
* Member: Scott Yoder
** email: mmt [at] pumpingstationone [dot] org
** slack handle: @Scott yoder

=== General Operations (GenOps) ===

All are generalists but each has a primary responsibility.

* Team Lead: Andrew Morris
** email: genops [at] pumpingstationone [dot] org
** slack handle: @morrand
* Woodshop Storage Manager: Gary Newhouse
** email: genops [at] pumpingstationone [dot] org
** slack handle: @GARYn
* other areas storage manager : Sean Blum
** email: genops [at] pumpingstationone [dot] org
** slack handle: @Sean Blum
*operations Liason: Brian Desmond
** slack handle: @Brian D
* operations advisor: Brian Barnt
** slack handle: @Bbarnt

== Board-Appointed Officers ==

=== Chief Technology Officer ===
* Name: Sky Nova
** email: cto@pumpingstationone [dot] org
** slack handle: @Sky

=== Education Officer ===
* Name: currently vacant

=== Communications/PR ===
* Name: Alicia Johnson
** email: press [at] pumpingstationone [dot] org pr@pumpingstationone [dot] org
** slack handle:

=== Treasurer ===
* Name: Carl Karsten
** email: treasurer [at] pumpingstationone [dot] org

== Board of Directors ==
* President: Paul Ocampo
* Vice President: Nathan Upchurch
* Secretary: Joe Mertz
* Director-at-Large: Tim Bielawa
* Director-at-Large: Donzell Gordon
* Director-at-Large:Jennie Plasterer
* Director-at-Large: Fidel Galano
* Director-at-Large: Jesse Seay

Volunteer Positions

2022-09-21T01:20:23Z

Aerishay: /* Woodshop */

The Board of Directors has designated the following official Volunteer Positions. See [[Area Hosts and Volunteer Positions Policy]] for more information. See also [[:Category:Hosted Areas|Area Hosts]] for a list of Area Hosts.

= Volunteer Positions =

==== Responsibilities ====
*Each Volunteer's roles may vary. These volunteers serve to assist in the general maintenance of the space and community in conjunction with specific Area Hosts.

== Area Hosts ==
''Main article: [[Area Hosts]]''

=== 2D Printers ===
TBD

=== 3D Printing ===
* Matt Keith - Hardware/Software Upgrades & Maintenance
** email: 3dprinting [at] pumpingstationone [dot] org
* Sam Donahue - Authorizations
** email: 3dprinting [at] pumpingstationone [dot] org
** slack handle: @Sam Donahue
** slack channels
***3d_layers

=== Arts & Crafts ===
* Lydia Miller
** email: arts [at] pumpingstationone [dot] org
** slack handle: @Lydia Miller

=== CNC Machining ===
* Adam Molski
** email: cnc [at] pumpingstationone [dot] org
** slack handle: @MikeThompson
** slack channels
***fusion-360
***cad-cam
***cnc
***tormach_user_group

=== Cold Metals ===
* Jim Brink
** email: coldmetals@pumpingstationone.org
** email: 2010jfb[at] gmail [dot] com
** slack handle: @Jim Brink
** slack channels
***coldmetals

=== Electronics ===
* Andrew Wingate
** email: electronics@pumpingstationone [dot]
** slack handle: @Anna Yu
** slack channels
***electronics

=== Gen Ops ===
* Andrew Morris
** email: GenOps [at] pumpingstationone [dot] org
** slack handle: @morrand

=== Hot Metals ===
* Ron Olson
** email: hotmetals [at] pumpingstationone [dot] org
** slack handle: @tackoknight
** slack channels
***hotmetalshop

=== Kitchen ===
* Ashley Shewmaker
** email: kitchen [at] pumpingstationone [dot] org
** slack handle: @kitschwitch
**slack channels
***kitchen

=== Lasers ===
* Ash Jasani
** email: lasers [at] pumpingstationone [dot] org
** slack handle: @Ash
** slack channels
***lasers

=== Small Metals ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally
** slack channels
***small-metals

=== Woodshop ===
* David Sayer
** email: woodshop [at] pumpingstationone [dot] org
** slack handle: davissayer
** slack channels
***woodshop

=== Events Coordinator ===
* Contact: [[user:lyn|Lyn Cole]]
** email: parties {at} pumpingstationone [dot] org
** slack handle: @LynPurple

== Authorizers ==
''Main article: [[Volunteer Authorizer]]''

Getting authorized on tools can be tough. Sometimes it's hard for new members to figure out how to get authorized, sometimes classes fill up in hours, sometimes classes aren't scheduled regularly. We want to fix that. The Board has created the following Volunteer Positions. We need a few members to step up and offer their time to get people authorized.

==== Responsibilities and Incentives ====

* Another page with a description of volunteer authorizer positions is here https://wiki.pumpingstationone.org/Volunteer_Authorizer

=== CNC Authorizer ===
* Shopbot: David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David
* Tormach: Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* Boss Laser: Jeff Zelnio
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Jeffz
* Boss Laser: Andrew Camardella
** email: laser-auths@pumpingstationone [dot] org
** slack handle: @rhystgeeke
* Universal Laser: Ash Jasani
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Ash
* Universal Laser: Casimir Leja
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Casimir Leja
* Universal Laser: Esty Wexler
** email: laser-auths [at] pumpingstationone [dot] org
** slack handle: @Esty Wexler

=== Hot Metals Authorizers ===
* Daron Wooding
** email: daron.wooding [at] gmail [dot] com
* Aaron Feigen
**email: aaronfeigen [at] gmail [dot] com
** slack handle: @nibbtastic
* Jacob Dawson
**email: ps1@jmdawson [dot] net
** slack handle: @Jacob M. Dawson
* Sean Blum
**email: arthifflaw [at] gmail [dot] com
** slack handle: @Sean Blum

=== Cold Metals Authorizers ===
==== Basic Authorization: Tier 1 ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* [[User:mct|McTavish McArdle]]
** (preferred) email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== LeBlond Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Clausing Lathe ====
* Anna Yu
** email: annotatehere [at] gmail [dot] com

==== Bridgeport Knee Mill ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct

==== Grizzly Lathe ====
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave

==== Surface Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel
* Jim Brink
** email: 2010jfb [at] gmail [dot] com
** slack handle: @Jim Brink

==== Baldor Tool Grinder ====
* [[User:mct|McTavish McArdle]]
** email: mctavishmcardle [at] gmail [dot] com
** slack handle: @mct
* Dave Soloman (Crazy Uncle Dave)
** email: davelscom14 [at] gmail [dot] com
** slack handle: @CrazyUncleDave
* Wally Fugiel
** email: wally.fugiel [at] videojet [dot] com
**slack handle: @Wally Fugiel

=== Small Metals Authorizer ===
* Ally Reza
** email: smallmetals [at] pumpingstationone [dot] org
** slack handle: @Ally

=== Tormach Authorizers ===
* Alex Berkowitz
** email: alex [at] pumpingstationone [dot] org
** slack handle: @Alex Berkowitz
* David Earl
** email: president [at] pumpingstationone [dot] org
** slack handle: @David

=== Woodshop Authorizers and maintenance. ===
*Gary Newhouse - shop storage, wiki, Canvas course manager
** email Gnewhouse @ gmail dot com
**slack handle @garynhouse

* Ralph Brendler - General auth, mortise and tenon jigs, and multi-router
** email: rebrendler [at] gmail [dot] com
** slack handle: @Ralph Brendler

*David Earl
** slack handle @david earl

*Tim Kaye
** slack handle: @Tim

* Joseph Staffa
** Slack handle : @joseph Staffa

* Ian Sampson -general Auth, maintenance, wiki, Canvas courses

* Brenda Caflin -General Auth , maint,

* Jim Leonardson - small tool maintenance

*dan Ennion - general Auth, maintenance.

* Dan Walsh

* Brendan Twaddell

* Donzell Gordon - Woodshop Lathe Only
** email: donzellphoto [at] gmail [dot] com
** slack handle: @Donzell007

* Sam Paris. Maintenance team

* Tim Kaye. Maintenance team

=== Membership Management Team (MMT) ===
* Team Lead: Vacant
** email: mmt [at] pumpingstationone [dot] org
** slack handle:
* Scholarship Liason: Nathan Upchurch
** email: scholarships [at] pumpingstationone [dot] org
** slack handle: @Nathan U
* Member: Scott Yoder
** email: mmt [at] pumpingstationone [dot] org
** slack handle: @Scott yoder

=== General Operations (GenOps) ===

All are generalists but each has a primary responsibility.

* Team Lead: Andrew Morris
** email: genops [at] pumpingstationone [dot] org
** slack handle: @morrand
* Woodshop Storage Manager: Gary Newhouse
** email: genops [at] pumpingstationone [dot] org
** slack handle: @GARYn
* other areas storage manager : Sean Blum
** email: genops [at] pumpingstationone [dot] org
** slack handle: @Sean Blum
*operations Liason: Brian Desmond
** slack handle: @Brian D
* operations advisor: Brian Barnt
** slack handle: @Bbarnt

== Board-Appointed Officers ==

=== Chief Technology Officer ===
* Name: Sky Nova
** email: cto@pumpingstationone [dot] org
** slack handle: @Sky

=== Education Officer ===
* Name: currently vacant

=== Communications/PR ===
* Name: Alicia Johnson
** email: press [at] pumpingstationone [dot] org pr@pumpingstationone [dot] org
** slack handle:

=== Treasurer ===
* Name: Carl Karsten
** email: treasurer [at] pumpingstationone [dot] org

== Board of Directors ==
* President: Paul Ocampo
* Vice President: Nathan Upchurch
* Secretary: Joe Mertz
* Director-at-Large: Tim Bielawa
* Director-at-Large: Donzell Gordon
* Director-at-Large:Jennie Plasterer
* Director-at-Large: Fidel Galano
* Director-at-Large: Jesse Seay

Board Meeting Notes 2022-07-19

2022-08-03T00:06:31Z

Aerishay:

{{Board Meeting Notes
| Previous YYYY-MM-DD= 2022-07-05
| Next YYYY-MM-DD= 2022-08-02
| YYYY=2022
}}

Meeting Start:

== Attendance ==
* Board Members
**Paul
**Joe
**Donzell
**Jennie
**Jesse

* Other Members
**Sky
**Andrew Morris
**Andrew Wingate
**Ashley

== Agenda ==

* Consent Agenda
**Minutes - agreed
* Committee Reports
* Read mail
* Financial/membership report
* Review the PayPal and banking transactions
* Member leaving reason reports
* Check Freshdesk queue

* New business
* Old business

== Minutes ==

=== Discussion on previous minutes ===

=== Consent Agenda ===

=== Committee Reports ===

Reports from [[Committees]]

=== Mail ===

=== Financial Report ===
* '''Chase Checking:'''
* '''Chase Savings:'''
* '''PEX:'''
* '''PayPal:'''

=== Membership Report ===

* '''Number of Members:''' 526 total, 503 active
* '''Quorum:'''

=== Review the PayPal and banking transactions ===

=== Member Leaving Reason Reports ===

=== Freshdesk ===

Login link: https://pumpingstationone.freshdesk.com

=== New Business ===

*Gas & electric suppliers
**Sky to get numbers, Jennie to help
*Open House Chicago
**Alicia and Joe to work on this
*treasury report
**halfway point financials complete
*Party update
**Alicia to post
*volunteer recruitment update
**A few people interested in treasury
=== Old Business ===

== Votes ==

[[Category:Board_Meetings]]
[[Category:2022 Board Meetings]]

Board Meeting Notes 2022-07-19

2022-08-03T00:05:54Z

Aerishay:

{{Board Meeting Notes
| Previous YYYY-MM-DD= 2022-07-05
| Next YYYY-MM-DD= 2022-08-02
| YYYY=2022
}}

Meeting Start:

== Attendance ==
* Board Members
**Paul
**Joe
**Donzell
**Jennie
**Jesse

* Other Members
**Sky
**Andrew Morris
**Andrew Wingate
**Ashley

== Agenda ==

* Consent Agenda
* Committee Reports
* Read mail
* Financial/membership report
* Review the PayPal and banking transactions
* Member leaving reason reports
* Check Freshdesk queue

* New business
* Old business

== Minutes ==

=== Discussion on previous minutes ===

=== Consent Agenda ===

=== Committee Reports ===

Reports from [[Committees]]

=== Mail ===

=== Financial Report ===
* '''Chase Checking:'''
* '''Chase Savings:'''
* '''PEX:'''
* '''PayPal:'''

=== Membership Report ===

* '''Number of Members:''' 526 total, 503 active
* '''Quorum:'''

=== Review the PayPal and banking transactions ===

=== Member Leaving Reason Reports ===

=== Freshdesk ===

Login link: https://pumpingstationone.freshdesk.com

=== New Business ===

*Gas & electric suppliers
**Sky to get numbers, Jennie to help
*Open House Chicago
**Alicia and Joe to work on this
*treasury report
**halfway point financials complete
*Party update
**Alicia to post
*volunteer recruitment update
**A few people interested in treasury
=== Old Business ===

== Votes ==

[[Category:Board_Meetings]]
[[Category:2022 Board Meetings]]

Board Meeting Notes 2022-07-19

2022-08-03T00:03:47Z

Aerishay:

{{Board Meeting Notes
| Previous YYYY-MM-DD= 2022-07-05
| Next YYYY-MM-DD= 2022-08-02
| YYYY=2022
}}

Meeting Start:

== Attendance ==
* Board Members
**

* Other Members
**

== Agenda ==

* Consent Agenda
* Committee Reports
* Read mail
* Financial/membership report
* Review the PayPal and banking transactions
* Member leaving reason reports
* Check Freshdesk queue

* New business
* Old business

== Minutes ==

=== Discussion on previous minutes ===

=== Consent Agenda ===

=== Committee Reports ===

Reports from [[Committees]]

=== Mail ===

=== Financial Report ===
* '''Chase Checking:'''
* '''Chase Savings:'''
* '''PEX:'''
* '''PayPal:'''

=== Membership Report ===

* '''Number of Members:''' 526 total, 503 active
* '''Quorum:'''

=== Review the PayPal and banking transactions ===

=== Member Leaving Reason Reports ===

=== Freshdesk ===

Login link: https://pumpingstationone.freshdesk.com

=== New Business ===

*Gas & electric suppliers
**Sky to get numbers, Jennie to help
*Open House Chicago
**Alicia and Joe to work on this
*treasury report
**halfway point financials complete
*Party update
**Alicia to post
*volunteer recruitment update
**A few people interested in treasury
=== Old Business ===

== Votes ==

[[Category:Board_Meetings]]
[[Category:2022 Board Meetings]]

2022 Budget Vote

2021-12-13T01:08:32Z

Aerishay: /* Vote */

== Vote ==

== Sponsors ==

* [[user:Carlfk|Carl Karsten]]
* Jennie Plasterer
*

== History ==
* Dec 1 2021 - Vote announced
* Dec 14 2021 - Language locked in.
* Dec 21 2021 - Vote of the membership on this budget.

== Background ==

PS1 brings in over 200k per year. Some of that money has to be spent on things such as rent and electricity (I assume per the bylaws) and some of it the membership gets to decide how to spend it. The part that the membership controls could be done via 10's or 100's of individual votes throughout the year, but there is something to be said for having one big vote at the beginning of the year, and that is what this is all about. There does not have to be any money allocated for additional votes, and as the organizations financial position changes we will have more or less money to work with.

The budget spreadsheet is to help predict, but not define how money will be saved or spent. Only what is in the language of this vote is what is begging to be voted on.

=== Aims ===

This budget is designed with the following goals:

* Set aside funds for emergency expenses such as health and safety, building maintenance/improvements/code compliance, and city occupancy.
* Authorize the Board to spend money on normal administrative expenses not already authorized by the bylaws.
* Predict expenditures based on a conservative membership model that shows 0% growth based on current membership and income calculations.

=== Additional Notes ===

*For additional documentation and calculations please see the [https://docs.google.com/spreadsheets/d/1gynxUHR2YQXem99H9go4ohc0YE6hn5Gs-Gd_CIPBWuw/edit?usp=sharing 2022 PS:One Fiscal Year Budget] Google Docs. This is not what is being voted on, but helps you understand how big is the pie, and and how much is available.

* Events (aka Meals and Entertainment) is a budget chaired by the Events Volunteer. Funds are allocated to those roles, but are considered part of the administrative budget.

* Funding of savings goals/accounts should be amortized over the year. Spending in other categories can still occur before these goals are met.
* Note: as of Dec 1 2021, the savings is 100k
* GenOps has taken responsibility for cleaning service and waste removal, previously Administrative.
* GenOps has taken responsibility for what was previously General Area.

=== Area Budgets ===

{| class="wikitable"

|-
| 2D CNC || $1,700 || Madison W. Burger || [https://docs.google.com/spreadsheets/d/14jmOrwzUA6XQ-wsO5EKr7EMF3Yu4GNZ7MHz-P4Dl_tE/edit?usp=sharing Worksheet]
|-
| 3D CNC || $6,645 || Matthew Keith || [https://docs.google.com/spreadsheets/d/1AD7pHqbFh-V0ZWFTZRddIfLm_TxafI47V0AwkDnKW4E/edit?usp=sharing Worksheet]
|-
| Lasers CNC || $5,550 || Ashish Jasani || [https://docs.google.com/spreadsheets/d/1oE_3Ngm0_PiYpLCG16fyPXsv27VnE_TY6g1ro4WacyU/edit?usp=sharing Worksheet]
|-
| Industrial CNC || $9,813 || Mike Thompson || [https://docs.google.com/spreadsheets/d/1PXJ6ca8T8ZCdzhbkR4kgXAYZIKgzb5iUhJGwLCIx9eU/edit?usp=sharing Worksheet]
|-
| Cold Metals || $5,400 || Jim Brink || [https://docs.google.com/spreadsheets/d/1TsGzEiU-Zg0q_F_oEydFp3rbpO98TSAqb5dGCW7i60A/edit?usp=sharing Worksheet]
|-
| Electronics || $4,635 || Andrew Wingate || [https://docs.google.com/spreadsheets/d/1rw05c5j7cBc_In2bHSkOaOM2rYViASV1YKXRiBQ0TDA/edit?usp=sharing Worksheet]
|-
| General Operations Team || $38,440 || Andrew Morris || [https://docs.google.com/spreadsheets/d/1JcYfDp06IP8zoQQx79BuVYhSsyopJLDjNmLPSlaMZ9c/edit?usp=sharing Worksheet]
|-
| Graphic Arts and Textiles || $7,400 || Vero Smith || [https://docs.google.com/spreadsheets/d/1JJP_k-vN4BPGtOU7iK8jUJILQbx8hMogZSM6Wf4kAJ4/edit?usp=sharing Worksheet]
|-
| Hot Metals || $8,250 || Ron Olson || [https://docs.google.com/spreadsheets/d/1xHefv7LIeJ5lFV6ZuM-Y2RDEHPViEnC7ssGCuXMgyYE/edit?usp=sharing Worksheet]
|-
| Kitchen || $3,600 || || [https://docs.google.com/spreadsheets/d/1kZ4pHrnYLWmhycXTicazSOe8gSmg_iNfyh6ysXI5_1Y/edit?usp=sharing Worksheet]
|-
| Small Metals || $4,300 || Ally Reza || [https://docs.google.com/spreadsheets/d/1qnOBtwm0F3_MSjonfIhDf3NGtCG3A_KDvtmdv8jNy2w/edit?usp=sharing Worksheet]
|-
| Woodshop || $11,550 || Eric Beauchamp || [https://docs.google.com/spreadsheets/d/1iRsp3CosWld3G8h4T4yPPmLo8G-f_GjH5ge6klmgHNY/edit?usp=sharing Worksheet]
|-
| Technology Equipment || $12,069 || Sky Nova || [https://docs.google.com/spreadsheets/d/1NOl7bWRpjc5rnv5cwkjWS3CBTmcmw6aowdmzlxKQyBA/edit?usp=sharing Worksheet]
|-
| Public Relations || $1,700 || || [https://docs.google.com/spreadsheets/d/1iT1y7ncikI1DzUUHc0ZrNmtQkh6z-lWbuEF-7H5eKec/edit?usp=sharing Worksheet]
|-
|
|-
| '''Total:''' || '''$119,052 || || '''
|}
== Language ==

This vote is to authorize the budget for the fiscal year of 2022, which goes into effect January 1, 2022 and expires December 31, 2022.

The following expenditures and allocations are approved by this budget:

==== Administrative Expenses ====
Authorize the board to spend up to $1,000.00 to cover administrative and emergency expenditures for the fiscal year of 2022.

{| class="wikitable"
! Account !! Amount
|-
| Meals & Entertainment || $1,000.00
|-
| Cleaning Service - $760/m x 12 || $0.00
|-
| Total || $1,000.00
|}
=== 2D CNC ===
Authorize the board to spend up to $1,700 to cover 2D CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== 3D CNC ===
Authorize the board to spend up to $6,645 to cover 3D CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Lasers CNC ===
Authorize the board to spend up to $5,550 to cover Lasers CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Industrial CNC ===
Authorize the board to spend up to $9,813 to cover Industrial CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Cold Metals ===
Authorize the board to spend up to $5,400 to cover Cold Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Electronics ===
Authorize the board to spend up to $4,635 to cover Electronics expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== General Operations Team ===
Authorize the board to spend up to $38,440 to cover General Operations Team expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Graphic Arts and Textiles ===
Authorize the board to spend up to $7,400 to cover Graphic Arts and Textiles expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Hot Metals ===
Authorize the board to spend up to $8,250 to cover Hot Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Kitchen ===
Authorize the board to spend up to $3,600 to cover Kitchen expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Small Metals ===
Authorize the board to spend up to $4,300 to cover Small Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Woodshop ===
Authorize the board to spend up to $11,550 to cover Woodshop expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Technology Equipment ===
Authorize the board to spend up to $12,069 to cover Technology Equipment expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Public Relations ===
Authorize the board to spend up to $1,700 to cover Public Relations expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

== Results ==
* Time of Vote -
* Quorum:
* For:
* Against:
* Abstain:

[[Category:Votes]]
[[Category:2021 Votes]]
[[Category:Budget]]

2022 Budget Vote

2021-12-09T19:40:26Z

Aerishay:

== Vote ==
Varying forms of Salad

or

Time to Beg

== Sponsors ==

* [[user:Carlfk|Carl Karsten]]
* Jennie Plasterer
*

== History ==
* Dec 1 2021 - Vote announced
* Dec 14 2021 - Language locked in.
* Dec 21 2021 - Vote of the membership on this budget.

== Background ==

PS1 brings in over 200k per year. Some of that money has to be spent on things such as rent and electricity (I assume per the bylaws) and some of it the membership gets to decide how to spend it. The part that the membership controls could be done via 10's or 100's of individual votes throughout the year, but there is something to be said for having one big vote at the beginning of the year, and that is what this is all about. There does not have to be any money allocated for additional votes, and as the organizations financial position changes we will have more or less money to work with.

The budget spreadsheet is to help predict, but not define how money will be saved or spent. Only what is in the language of this vote is what is begging to be voted on.

=== Aims ===

This budget is designed with the following goals:

* Set aside funds for emergency expenses such as health and safety, building maintenance/improvements/code compliance, and city occupancy.
* Authorize the Board to spend money on normal administrative expenses not already authorized by the bylaws.
* Predict expenditures based on a conservative membership model that shows 0% growth based on current membership and income calculations.

=== Additional Notes ===

*For additional documentation and calculations please see the [https://docs.google.com/spreadsheets/d/1gynxUHR2YQXem99H9go4ohc0YE6hn5Gs-Gd_CIPBWuw/edit?usp=sharing 2022 PS:One Fiscal Year Budget] Google Docs. This is not what is being voted on, but helps you understand how big is the pie, and and how much is available.

* Events (aka Meals and Entertainment) is a budget chaired by the Events Volunteer. Funds are allocated to those roles, but are considered part of the administrative budget.

* Funding of savings goals/accounts should be amortized over the year. Spending in other categories can still occur before these goals are met.
* Note: as of Dec 1 2021, the savings is 100k
* GenOps has taken responsibility for cleaning service and waste removal, previously Administrative.
* GenOps has taken responsibility for what was previously General Area.

=== Area Budgets ===

{| class="wikitable"

|-
| 2D CNC || $1,700 || Madison W. Burger || [https://docs.google.com/spreadsheets/d/14jmOrwzUA6XQ-wsO5EKr7EMF3Yu4GNZ7MHz-P4Dl_tE/edit?usp=sharing Worksheet]
|-
| 3D CNC || $6,645 || Matthew Keith || [https://docs.google.com/spreadsheets/d/1AD7pHqbFh-V0ZWFTZRddIfLm_TxafI47V0AwkDnKW4E/edit?usp=sharing Worksheet]
|-
| Lasers CNC || $5,550 || Ashish Jasani || [https://docs.google.com/spreadsheets/d/1oE_3Ngm0_PiYpLCG16fyPXsv27VnE_TY6g1ro4WacyU/edit?usp=sharing Worksheet]
|-
| Industrial CNC || $9,813 || Mike Thompson || [https://docs.google.com/spreadsheets/d/1PXJ6ca8T8ZCdzhbkR4kgXAYZIKgzb5iUhJGwLCIx9eU/edit?usp=sharing Worksheet]
|-
| Cold Metals || $5,400 || Jim Brink || [https://docs.google.com/spreadsheets/d/1TsGzEiU-Zg0q_F_oEydFp3rbpO98TSAqb5dGCW7i60A/edit?usp=sharing Worksheet]
|-
| Electronics || $4,635 || Andrew Wingate || [https://docs.google.com/spreadsheets/d/1rw05c5j7cBc_In2bHSkOaOM2rYViASV1YKXRiBQ0TDA/edit?usp=sharing Worksheet]
|-
| General Operations Team || $38,440 || Andrew Morris || [https://docs.google.com/spreadsheets/d/1JcYfDp06IP8zoQQx79BuVYhSsyopJLDjNmLPSlaMZ9c/edit?usp=sharing Worksheet]
|-
| Graphic Arts and Textiles || $7,400 || Vero Smith || [https://docs.google.com/spreadsheets/d/1JJP_k-vN4BPGtOU7iK8jUJILQbx8hMogZSM6Wf4kAJ4/edit?usp=sharing Worksheet]
|-
| Hot Metals || $8,250 || Ron Olson || [https://docs.google.com/spreadsheets/d/1xHefv7LIeJ5lFV6ZuM-Y2RDEHPViEnC7ssGCuXMgyYE/edit?usp=sharing Worksheet]
|-
| Kitchen || $3,600 || || [https://docs.google.com/spreadsheets/d/1kZ4pHrnYLWmhycXTicazSOe8gSmg_iNfyh6ysXI5_1Y/edit?usp=sharing Worksheet]
|-
| Small Metals || $4,300 || Ally Reza || [https://docs.google.com/spreadsheets/d/1qnOBtwm0F3_MSjonfIhDf3NGtCG3A_KDvtmdv8jNy2w/edit?usp=sharing Worksheet]
|-
| Woodshop || $11,550 || Eric Beauchamp || [https://docs.google.com/spreadsheets/d/1iRsp3CosWld3G8h4T4yPPmLo8G-f_GjH5ge6klmgHNY/edit?usp=sharing Worksheet]
|-
| Technology Equipment || $12,069 || Sky Nova || [https://docs.google.com/spreadsheets/d/1NOl7bWRpjc5rnv5cwkjWS3CBTmcmw6aowdmzlxKQyBA/edit?usp=sharing Worksheet]
|-
| Public Relations || $1,700 || || [https://docs.google.com/spreadsheets/d/1iT1y7ncikI1DzUUHc0ZrNmtQkh6z-lWbuEF-7H5eKec/edit?usp=sharing Worksheet]
|-
|
|-
| '''Total:''' || '''$119,052 || || '''
|}
== Language ==

This vote is to authorize the budget for the fiscal year of 2022, which goes into effect January 1, 2022 and expires December 31, 2022.

The following expenditures and allocations are approved by this budget:

==== Administrative Expenses ====
Authorize the board to spend up to $1,000.00 to cover administrative and emergency expenditures for the fiscal year of 2022.

{| class="wikitable"
! Account !! Amount
|-
| Meals & Entertainment || $1,000.00
|-
| Cleaning Service - $760/m x 12 || $0.00
|-
| Total || $1,000.00
|}
=== 2D CNC ===
Authorize the board to spend up to $1,700 to cover 2D CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== 3D CNC ===
Authorize the board to spend up to $6,645 to cover 3D CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Lasers CNC ===
Authorize the board to spend up to $5,550 to cover Lasers CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Industrial CNC ===
Authorize the board to spend up to $9,813 to cover Industrial CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Cold Metals ===
Authorize the board to spend up to $5,400 to cover Cold Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Electronics ===
Authorize the board to spend up to $4,635 to cover Electronics expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== General Operations Team ===
Authorize the board to spend up to $38,440 to cover General Operations Team expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Graphic Arts and Textiles ===
Authorize the board to spend up to $7,400 to cover Graphic Arts and Textiles expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Hot Metals ===
Authorize the board to spend up to $8,250 to cover Hot Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Kitchen ===
Authorize the board to spend up to $3,600 to cover Kitchen expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Small Metals ===
Authorize the board to spend up to $4,300 to cover Small Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Woodshop ===
Authorize the board to spend up to $11,550 to cover Woodshop expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Technology Equipment ===
Authorize the board to spend up to $12,069 to cover Technology Equipment expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Public Relations ===
Authorize the board to spend up to $1,700 to cover Public Relations expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

== Results ==
* Time of Vote -
* Quorum:
* For:
* Against:
* Abstain:

[[Category:Votes]]
[[Category:2021 Votes]]
[[Category:Budget]]

2022 Budget Vote

2021-12-07T19:31:19Z

Aerishay: /* Additional Notes */

== Vote ==
Varying forms of Salad

or

Time to Beg

== Sponsors ==

* [[user:Carlfk|Carl Karsten]]
* Jennie Plasterer
*

== History ==
* Dec 1 2021 - Vote announced
* Dec 14 2021 - Language locked in.
* Dec 21 2021 - Vote of the membership on this budget.

== Background ==

PS1 brings in over 200k per year. Some of that money has to be spent on things such as rent and electricity (I assume per the bylaws) and some of it the membership gets to decide how to spend it. The part that the membership controls could be done via 10's or 100's of individual votes throughout the year, but there is something to be said for having one big vote at the beginning of the year, and that is what this is all about. There does not have to be any money allocated for additional votes, and as the organizations financial position changes we will have more or less money to work with.

The budget spreadsheet is to help predict, but not define how money will be saved or spent. Only what is in the language of this vote is what is begging to be voted on.

=== Aims ===

This budget is designed with the following goals:

* Set aside funds for emergency expenses such as health and safety, building maintenance/improvements/code compliance, and city occupancy.
* Authorize the Board to spend money on normal administrative expenses not already authorized by the bylaws.
* Predict expenditures based on a conservative membership model that shows 0% growth based on current membership and income calculations.

=== Additional Notes ===

*For additional documentation and calculations please see the [https://docs.google.com/spreadsheets/d/1gynxUHR2YQXem99H9go4ohc0YE6hn5Gs-Gd_CIPBWuw/edit?usp=sharing 2022 PS:One Fiscal Year Budget] Google Docs. This is not what is being voted on, but helps you understand how big is the pie, and and how much is available.

* Events (aka Meals and Entertainment) is a budget chaired by the Events Volunteer. Funds are allocated to those roles, but are considered part of the administrative budget.

* Funding of savings goals/accounts should be amortized over the year. Spending in other categories can still occur before these goals are met.
* Note: as of Dec 1 2021, the savings is 100k
* GenOps has taken responsibility for cleaning service and waste removal, previously Administrative.
* GenOps has taken responsibility for what was previously General Area.

=== Area Budgets ===

{| class="wikitable"

|-
| 2D CNC || $1,700 || Madison W. Burger || [https://docs.google.com/spreadsheets/d/14jmOrwzUA6XQ-wsO5EKr7EMF3Yu4GNZ7MHz-P4Dl_tE/edit?usp=sharing Worksheet]
|-
| 3D CNC || $6,645 || Matthew Keith || [https://docs.google.com/spreadsheets/d/1AD7pHqbFh-V0ZWFTZRddIfLm_TxafI47V0AwkDnKW4E/edit?usp=sharing Worksheet]
|-
| Lasers CNC || $5,550 || Ashish Jasani || [https://docs.google.com/spreadsheets/d/1oE_3Ngm0_PiYpLCG16fyPXsv27VnE_TY6g1ro4WacyU/edit?usp=sharing Worksheet]
|-
| Industrial CNC || $9,813 || Mike Thompson || [https://docs.google.com/spreadsheets/d/1PXJ6ca8T8ZCdzhbkR4kgXAYZIKgzb5iUhJGwLCIx9eU/edit?usp=sharing Worksheet]
|-
| Cold Metals || $5,400 || Jim Brink || [https://docs.google.com/spreadsheets/d/1TsGzEiU-Zg0q_F_oEydFp3rbpO98TSAqb5dGCW7i60A/edit?usp=sharing Worksheet]
|-
| Electronics || $4,635 || Andrew Wingate || [https://docs.google.com/spreadsheets/d/1rw05c5j7cBc_In2bHSkOaOM2rYViASV1YKXRiBQ0TDA/edit?usp=sharing Worksheet]
|-
| General Operations Team || $38,440 || Andrew Morris || [https://docs.google.com/spreadsheets/d/1JcYfDp06IP8zoQQx79BuVYhSsyopJLDjNmLPSlaMZ9c/edit?usp=sharing Worksheet]
|-
| Graphic Arts and Textiles || $7,400 || || [https://docs.google.com/spreadsheets/d/1JJP_k-vN4BPGtOU7iK8jUJILQbx8hMogZSM6Wf4kAJ4/edit?usp=sharing Worksheet]
|-
| Hot Metals || $8,250 || Ron Olson || [https://docs.google.com/spreadsheets/d/1xHefv7LIeJ5lFV6ZuM-Y2RDEHPViEnC7ssGCuXMgyYE/edit?usp=sharing Worksheet]
|-
| Kitchen || $3,600 || || [https://docs.google.com/spreadsheets/d/1kZ4pHrnYLWmhycXTicazSOe8gSmg_iNfyh6ysXI5_1Y/edit?usp=sharing Worksheet]
|-
| Small Metals || $4,300 || Ally Reza || [https://docs.google.com/spreadsheets/d/1qnOBtwm0F3_MSjonfIhDf3NGtCG3A_KDvtmdv8jNy2w/edit?usp=sharing Worksheet]
|-
| Woodshop || $11,550 || Eric Beauchamp || [https://docs.google.com/spreadsheets/d/1iRsp3CosWld3G8h4T4yPPmLo8G-f_GjH5ge6klmgHNY/edit?usp=sharing Worksheet]
|-
| Technology Equipment || $12,069 || Sky Nova || [https://docs.google.com/spreadsheets/d/1NOl7bWRpjc5rnv5cwkjWS3CBTmcmw6aowdmzlxKQyBA/edit?usp=sharing Worksheet]
|-
| Public Relations || $1,700 || || [https://docs.google.com/spreadsheets/d/1iT1y7ncikI1DzUUHc0ZrNmtQkh6z-lWbuEF-7H5eKec/edit?usp=sharing Worksheet]
|-
|
|-
| '''Total:''' || '''$121,052 || || '''
|}
== Language ==

This vote is to authorize the budget for the fiscal year of 2022, which goes into effect January 1, 2022 and expires December 31, 2022.

The following expenditures and allocations are approved by this budget:

==== Administrative Expenses ====
Authorize the board to spend up to $1,000.00 to cover administrative and emergency expenditures for the fiscal year of 2022.

{| class="wikitable"
! Account !! Amount
|-
| Meals & Entertainment || $1,000.00
|-
| Cleaning Service - $760/m x 12 || $0.00
|-
| Total || $1,000.00
|}
=== 2D CNC ===
Authorize the board to spend up to $1,700 to cover 2D CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== 3D CNC ===
Authorize the board to spend up to $6,645 to cover 3D CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Lasers CNC ===
Authorize the board to spend up to $5,550 to cover Lasers CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Industrial CNC ===
Authorize the board to spend up to $9,813 to cover Industrial CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Cold Metals ===
Authorize the board to spend up to $5,400 to cover Cold Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Electronics ===
Authorize the board to spend up to $4,635 to cover Electronics expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== General Operations Team ===
Authorize the board to spend up to $38,440 to cover General Operations Team expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Graphic Arts and Textiles ===
Authorize the board to spend up to $7,400 to cover Graphic Arts and Textiles expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Hot Metals ===
Authorize the board to spend up to $8,250 to cover Hot Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Kitchen ===
Authorize the board to spend up to $3,600 to cover Kitchen expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Small Metals ===
Authorize the board to spend up to $4,300 to cover Small Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Woodshop ===
Authorize the board to spend up to $11,550 to cover Woodshop expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Technology Equipment ===
Authorize the board to spend up to $12,069 to cover Technology Equipment expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Public Relations ===
Authorize the board to spend up to $1,700 to cover Public Relations expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

== Results ==
* Time of Vote -
* Quorum:
* For:
* Against:
* Abstain:

[[Category:Votes]]
[[Category:2021 Votes]]
[[Category:Budget]]

2022 Budget Vote

2021-12-07T19:10:18Z

Aerishay: /* History */

== Vote ==
Varying forms of Salad

or

Time to Beg

== Sponsors ==

* [[user:Carlfk|Carl Karsten]]
* Jennie Plasterer
*

== History ==
* Dec 1 2021 - Vote announced
* Dec 14 2021 - Language locked in.
* Dec 21 2021 - Vote of the membership on this budget.

== Background ==

PS1 brings in over 200k per year. Some of that money has to be spent on things such as rent and electricity (I assume per the bylaws) and some of it the membership gets to decide how to spend it. The part that the membership controls could be done via 10's or 100's of individual votes throughout the year, but there is something to be said for having one big vote at the beginning of the year, and that is what this is all about. There does not have to be any money allocated for additional votes, and as the organizations financial position changes we will have more or less money to work with.

The budget spreadsheet is to help predict, but not define how money will be saved or spent. Only what is in the language of this vote is what is begging to be voted on.

=== Aims ===

This budget is designed with the following goals:

* Set aside funds for emergency expenses such as health and safety, building maintenance/improvements/code compliance, and city occupancy.
* Authorize the Board to spend money on normal administrative expenses not already authorized by the bylaws.
* Predict expenditures based on a conservative membership model that shows 0% growth based on current membership and income calculations.

=== Additional Notes ===

*For additional documentation and calculations please see the [https://docs.google.com/spreadsheets/d/1gynxUHR2YQXem99H9go4ohc0YE6hn5Gs-Gd_CIPBWuw/edit?usp=sharing 2022 PS:One Fiscal Year Budget] Google Docs. This is not what is being voted on, but helps you understand how big is the pie, and and how much is available.

* Events (aka Meals and Entertainment) is a budget chaired by the Events Volunteer. Funds are allocated to those roles, but are considered part of the administrative budget.

* Funding of savings goals/accounts should be amortized over the year. Spending in other categories can still occur before these goals are met.
* Note: as of Dec 1 2021, the savings is 100k, which will last till the middle of the year if things stay flat.
* If things get better, great. We will still have our savings fund.
* If things get worse, the membership and or the board can make adjustments.
* GenOps has taken responsibility for cleaning the bathrooms, paying for trash removal and what was previously General Area which totals about $25k.

=== Area Budgets ===

{| class="wikitable"

|-
| 2D CNC || $1,700 || Madison W. Burger || [https://docs.google.com/spreadsheets/d/14jmOrwzUA6XQ-wsO5EKr7EMF3Yu4GNZ7MHz-P4Dl_tE/edit?usp=sharing Worksheet]
|-
| 3D CNC || $6,645 || Matthew Keith || [https://docs.google.com/spreadsheets/d/1AD7pHqbFh-V0ZWFTZRddIfLm_TxafI47V0AwkDnKW4E/edit?usp=sharing Worksheet]
|-
| Lasers CNC || $5,550 || Ashish Jasani || [https://docs.google.com/spreadsheets/d/1oE_3Ngm0_PiYpLCG16fyPXsv27VnE_TY6g1ro4WacyU/edit?usp=sharing Worksheet]
|-
| Industrial CNC || $9,813 || Mike Thompson || [https://docs.google.com/spreadsheets/d/1PXJ6ca8T8ZCdzhbkR4kgXAYZIKgzb5iUhJGwLCIx9eU/edit?usp=sharing Worksheet]
|-
| Cold Metals || $5,400 || Jim Brink || [https://docs.google.com/spreadsheets/d/1TsGzEiU-Zg0q_F_oEydFp3rbpO98TSAqb5dGCW7i60A/edit?usp=sharing Worksheet]
|-
| Electronics || $4,635 || Andrew Wingate || [https://docs.google.com/spreadsheets/d/1rw05c5j7cBc_In2bHSkOaOM2rYViASV1YKXRiBQ0TDA/edit?usp=sharing Worksheet]
|-
| General Operations Team || $38,440 || Andrew Morris || [https://docs.google.com/spreadsheets/d/1JcYfDp06IP8zoQQx79BuVYhSsyopJLDjNmLPSlaMZ9c/edit?usp=sharing Worksheet]
|-
| Graphic Arts and Textiles || $7,400 || || [https://docs.google.com/spreadsheets/d/1JJP_k-vN4BPGtOU7iK8jUJILQbx8hMogZSM6Wf4kAJ4/edit?usp=sharing Worksheet]
|-
| Hot Metals || $8,250 || Ron Olson || [https://docs.google.com/spreadsheets/d/1xHefv7LIeJ5lFV6ZuM-Y2RDEHPViEnC7ssGCuXMgyYE/edit?usp=sharing Worksheet]
|-
| Kitchen || $3,600 || || [https://docs.google.com/spreadsheets/d/1kZ4pHrnYLWmhycXTicazSOe8gSmg_iNfyh6ysXI5_1Y/edit?usp=sharing Worksheet]
|-
| Small Metals || $4,300 || Ally Reza || [https://docs.google.com/spreadsheets/d/1qnOBtwm0F3_MSjonfIhDf3NGtCG3A_KDvtmdv8jNy2w/edit?usp=sharing Worksheet]
|-
| Woodshop || $11,550 || Eric Beauchamp || [https://docs.google.com/spreadsheets/d/1iRsp3CosWld3G8h4T4yPPmLo8G-f_GjH5ge6klmgHNY/edit?usp=sharing Worksheet]
|-
| Technology Equipment || $12,069 || Sky Nova || [https://docs.google.com/spreadsheets/d/1NOl7bWRpjc5rnv5cwkjWS3CBTmcmw6aowdmzlxKQyBA/edit?usp=sharing Worksheet]
|-
| Public Relations || $1,700 || || [https://docs.google.com/spreadsheets/d/1iT1y7ncikI1DzUUHc0ZrNmtQkh6z-lWbuEF-7H5eKec/edit?usp=sharing Worksheet]
|-
|
|-
| '''Total:''' || '''$121,052 || || '''
|}
== Language ==

This vote is to authorize the budget for the fiscal year of 2022, which goes into effect January 1, 2022 and expires December 31, 2022.

The following expenditures and allocations are approved by this budget:

==== Administrative Expenses ====
Authorize the board to spend up to $1,000.00 to cover administrative and emergency expenditures for the fiscal year of 2022.

{| class="wikitable"
! Account !! Amount
|-
| Meals & Entertainment || $1,000.00
|-
| Cleaning Service - $760/m x 12 || $0.00
|-
| Total || $1,000.00
|}
=== 2D CNC ===
Authorize the board to spend up to $1,700 to cover 2D CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== 3D CNC ===
Authorize the board to spend up to $6,645 to cover 3D CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Lasers CNC ===
Authorize the board to spend up to $5,550 to cover Lasers CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Industrial CNC ===
Authorize the board to spend up to $9,813 to cover Industrial CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Cold Metals ===
Authorize the board to spend up to $5,400 to cover Cold Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Electronics ===
Authorize the board to spend up to $4,635 to cover Electronics expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== General Operations Team ===
Authorize the board to spend up to $38,440 to cover General Operations Team expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Graphic Arts and Textiles ===
Authorize the board to spend up to $7,400 to cover Graphic Arts and Textiles expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Hot Metals ===
Authorize the board to spend up to $8,250 to cover Hot Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Kitchen ===
Authorize the board to spend up to $3,600 to cover Kitchen expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Small Metals ===
Authorize the board to spend up to $4,300 to cover Small Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Woodshop ===
Authorize the board to spend up to $11,550 to cover Woodshop expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Technology Equipment ===
Authorize the board to spend up to $12,069 to cover Technology Equipment expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Public Relations ===
Authorize the board to spend up to $1,700 to cover Public Relations expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

== Results ==
* Time of Vote -
* Quorum:
* For:
* Against:
* Abstain:

[[Category:Votes]]
[[Category:2021 Votes]]
[[Category:Budget]]

2022 Budget Vote

2021-12-07T19:09:12Z

Aerishay: /* Sponsors */

== Vote ==
Varying forms of Salad

or

Time to Beg

== Sponsors ==

* [[user:Carlfk|Carl Karsten]]
* Jennie Plasterer
*

== History ==
* Dec 1 2021 - Vote announced

Crystal ball says:

* Dec 2 2021 - Language locked in.
* Dec 7 2021 - Vote of the membership on this budget.

== Background ==

PS1 brings in over 200k per year. Some of that money has to be spent on things such as rent and electricity (I assume per the bylaws) and some of it the membership gets to decide how to spend it. The part that the membership controls could be done via 10's or 100's of individual votes throughout the year, but there is something to be said for having one big vote at the beginning of the year, and that is what this is all about. There does not have to be any money allocated for additional votes, and as the organizations financial position changes we will have more or less money to work with.

The budget spreadsheet is to help predict, but not define how money will be saved or spent. Only what is in the language of this vote is what is begging to be voted on.

=== Aims ===

This budget is designed with the following goals:

* Set aside funds for emergency expenses such as health and safety, building maintenance/improvements/code compliance, and city occupancy.
* Authorize the Board to spend money on normal administrative expenses not already authorized by the bylaws.
* Predict expenditures based on a conservative membership model that shows 0% growth based on current membership and income calculations.

=== Additional Notes ===

*For additional documentation and calculations please see the [https://docs.google.com/spreadsheets/d/1gynxUHR2YQXem99H9go4ohc0YE6hn5Gs-Gd_CIPBWuw/edit?usp=sharing 2022 PS:One Fiscal Year Budget] Google Docs. This is not what is being voted on, but helps you understand how big is the pie, and and how much is available.

* Events (aka Meals and Entertainment) is a budget chaired by the Events Volunteer. Funds are allocated to those roles, but are considered part of the administrative budget.

* Funding of savings goals/accounts should be amortized over the year. Spending in other categories can still occur before these goals are met.
* Note: as of Dec 1 2021, the savings is 100k, which will last till the middle of the year if things stay flat.
* If things get better, great. We will still have our savings fund.
* If things get worse, the membership and or the board can make adjustments.
* GenOps has taken responsibility for cleaning the bathrooms, paying for trash removal and what was previously General Area which totals about $25k.

=== Area Budgets ===

{| class="wikitable"

|-
| 2D CNC || $1,700 || Madison W. Burger || [https://docs.google.com/spreadsheets/d/14jmOrwzUA6XQ-wsO5EKr7EMF3Yu4GNZ7MHz-P4Dl_tE/edit?usp=sharing Worksheet]
|-
| 3D CNC || $6,645 || Matthew Keith || [https://docs.google.com/spreadsheets/d/1AD7pHqbFh-V0ZWFTZRddIfLm_TxafI47V0AwkDnKW4E/edit?usp=sharing Worksheet]
|-
| Lasers CNC || $5,550 || Ashish Jasani || [https://docs.google.com/spreadsheets/d/1oE_3Ngm0_PiYpLCG16fyPXsv27VnE_TY6g1ro4WacyU/edit?usp=sharing Worksheet]
|-
| Industrial CNC || $9,813 || Mike Thompson || [https://docs.google.com/spreadsheets/d/1PXJ6ca8T8ZCdzhbkR4kgXAYZIKgzb5iUhJGwLCIx9eU/edit?usp=sharing Worksheet]
|-
| Cold Metals || $5,400 || Jim Brink || [https://docs.google.com/spreadsheets/d/1TsGzEiU-Zg0q_F_oEydFp3rbpO98TSAqb5dGCW7i60A/edit?usp=sharing Worksheet]
|-
| Electronics || $4,635 || Andrew Wingate || [https://docs.google.com/spreadsheets/d/1rw05c5j7cBc_In2bHSkOaOM2rYViASV1YKXRiBQ0TDA/edit?usp=sharing Worksheet]
|-
| General Operations Team || $38,440 || Andrew Morris || [https://docs.google.com/spreadsheets/d/1JcYfDp06IP8zoQQx79BuVYhSsyopJLDjNmLPSlaMZ9c/edit?usp=sharing Worksheet]
|-
| Graphic Arts and Textiles || $7,400 || || [https://docs.google.com/spreadsheets/d/1JJP_k-vN4BPGtOU7iK8jUJILQbx8hMogZSM6Wf4kAJ4/edit?usp=sharing Worksheet]
|-
| Hot Metals || $8,250 || Ron Olson || [https://docs.google.com/spreadsheets/d/1xHefv7LIeJ5lFV6ZuM-Y2RDEHPViEnC7ssGCuXMgyYE/edit?usp=sharing Worksheet]
|-
| Kitchen || $3,600 || || [https://docs.google.com/spreadsheets/d/1kZ4pHrnYLWmhycXTicazSOe8gSmg_iNfyh6ysXI5_1Y/edit?usp=sharing Worksheet]
|-
| Small Metals || $4,300 || Ally Reza || [https://docs.google.com/spreadsheets/d/1qnOBtwm0F3_MSjonfIhDf3NGtCG3A_KDvtmdv8jNy2w/edit?usp=sharing Worksheet]
|-
| Woodshop || $11,550 || Eric Beauchamp || [https://docs.google.com/spreadsheets/d/1iRsp3CosWld3G8h4T4yPPmLo8G-f_GjH5ge6klmgHNY/edit?usp=sharing Worksheet]
|-
| Technology Equipment || $12,069 || Sky Nova || [https://docs.google.com/spreadsheets/d/1NOl7bWRpjc5rnv5cwkjWS3CBTmcmw6aowdmzlxKQyBA/edit?usp=sharing Worksheet]
|-
| Public Relations || $1,700 || || [https://docs.google.com/spreadsheets/d/1iT1y7ncikI1DzUUHc0ZrNmtQkh6z-lWbuEF-7H5eKec/edit?usp=sharing Worksheet]
|-
|
|-
| '''Total:''' || '''$121,052 || || '''
|}
== Language ==

This vote is to authorize the budget for the fiscal year of 2022, which goes into effect January 1, 2022 and expires December 31, 2022.

The following expenditures and allocations are approved by this budget:

==== Administrative Expenses ====
Authorize the board to spend up to $1,000.00 to cover administrative and emergency expenditures for the fiscal year of 2022.

{| class="wikitable"
! Account !! Amount
|-
| Meals & Entertainment || $1,000.00
|-
| Cleaning Service - $760/m x 12 || $0.00
|-
| Total || $1,000.00
|}
=== 2D CNC ===
Authorize the board to spend up to $1,700 to cover 2D CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== 3D CNC ===
Authorize the board to spend up to $6,645 to cover 3D CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Lasers CNC ===
Authorize the board to spend up to $5,550 to cover Lasers CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Industrial CNC ===
Authorize the board to spend up to $9,813 to cover Industrial CNC expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Cold Metals ===
Authorize the board to spend up to $5,400 to cover Cold Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Electronics ===
Authorize the board to spend up to $4,635 to cover Electronics expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== General Operations Team ===
Authorize the board to spend up to $38,440 to cover General Operations Team expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Graphic Arts and Textiles ===
Authorize the board to spend up to $7,400 to cover Graphic Arts and Textiles expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Hot Metals ===
Authorize the board to spend up to $8,250 to cover Hot Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Kitchen ===
Authorize the board to spend up to $3,600 to cover Kitchen expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Small Metals ===
Authorize the board to spend up to $4,300 to cover Small Metals expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Woodshop ===
Authorize the board to spend up to $11,550 to cover Woodshop expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Technology Equipment ===
Authorize the board to spend up to $12,069 to cover Technology Equipment expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

=== Public Relations ===
Authorize the board to spend up to $1,700 to cover Public Relations expenditures for the fiscal year of 2022. The board assigns this spending authority to the area host. This spending authorization goes into effect 1-1-2022 and expires 12-31-2022.

== Results ==
* Time of Vote -
* Quorum:
* For:
* Against:
* Abstain:

[[Category:Votes]]
[[Category:2021 Votes]]
[[Category:Budget]]

PEX User Guide

2021-02-01T05:25:59Z

Aerishay:

PEX User Guide
*For additional questions or issues, please email treasurer@pumpingstationone.org and/or info@pumpingstationone.org.

*The PEX app

**It’s great. And it is the only way to submit receipts that we accept. Why? Because hunting receipts through 6 different channels is miserable and we don’t want to do it. Download it immediately, please.

*Receipts

**All receipts must be attached to expenses via the PEX app.
***If they are not attached within 2 weeks of the purchase, we may deactivate your card until you are up-to-date with your receipts
***If we see suspicious activity we may discontinue your account at any time and ask you for more information, and if it is not provided, we may never reactivate your card.
****What is suspicious activity? Food and beverage purchases (excluding parties and kitchen), your morning McDonald’s purchase, unknown unnamed vendors(?) through Square or Patreon. Gas stations. Etc.
**Please include a note summarizing the purchase for the purposes of expediting our categorization.
***It need not be very specific
***Example: “hardware and brakes for sawstop”
**If you are a spender who occasionally makes purchases against multiple budgets
***You must add a note to your PEX expenses denoting which budget the expense is being applied to
***Example: “Gen ops - windows for the lounge”
**Where possible, avoid dividing single transactions that cross over multiple budgets
**If, for whatever reason, it is unavoidable that your expense be divided across multiple budgets, leave a clear note in the “Notes” field of your PEX expense
***“Pest control - 30% ($15) applied to kitchen, 70% ($35) applied to general”
**Please avoid making purchases for other card-holding areas with your PEX card where avoidable, unless of course you are gen-ops or CTO or another area/cardholder with a lot of inherent crossover
**Make sure your receipts are legible or we will not accept them, and we also reserve the right to have a really bad attitude about it.
***Well lit, reasonable levels of crinkle. None of this dark, dingy, potato chip nonsense.
**We will try to message you if you are behind on receipts and give you some amount of time to post them. Understand that if you lost them, it is your responsibility to find them.

*Votes

**If you spend against a vote budget, we need that to be very clearly specified in the notes of your PEX transaction in the “Notes” field.
**Avoid making generic area-related purchases and vote purchases in the same transaction where possible, as dividing expenses into multiple categories is messy.
***Example - “Dust Collector Vote - hardware and boards for cabinet”
Budget
**YOU are responsible for tracking your budget. We will try to keep up and keep you informed. We manually categorize all of your expenses as receipts are attached in PEX, so there will always be some amount of lag, as we do not categorize daily.
**This will be easier going into 2021 with our improved quickbooks, but we still encourage you to keep an eye on your own spending. PEX is also a good resource for this.
**If we see that you have spent more than your total budget, deactivate your card, contact you (by email), and wait for you to
***a) run a vote for additional funding
***b) ask for money from a different area with a kind-hearted area host who has underspent
***c) do nothing. [Not a great option. It won’t make us feel like turning your card on ever again, because it means we have to deal with your “whoops” money. If you ask for help, we will help you figure it out but we prefer you be involved in solving the problem rather than hot-potato-ing it at us].
***d) whatever else you choose to do.

*Funding/Additional Funding to PEX Balance

**We keep PEX cards roughly balanced at $500.
***This is done manually, on a roughly weekly basis, so if you are spending a lot in a short period of time, you may run into a depleted account problem.
***If you are intending to make a large purchase or a series of purchases, please send us an email 48 hours in advance and we can boost your account. **Tell us how much, why, and when you intend to spend it. If we see it sitting in your account after several weeks, we will remove it again.
If you have a reason why you would like a resting balance of more than 500, let us know and we will ^^^consider^^^ it.

Troubleshooting

*Pex Card Declines

**PEX cards have rulesets, each with different functions.
***Sometimes the reason for the decline is that a ruleset needs its attitude adjusted. If you are having a difficult time shopping at a specific type of store or stores in a specific geographic area, we may need to make an adjustment
***More often than not, it happens because PEX holders are entering the wrong pin or other mundanities.

*PEX Card Lost, Stolen, or Damaged

**Email treasurer@ and info@ immediately so we can turn it off and order a new one. Make sure to let us know when the new card arrives so we can reactivate your account.

*Accidental Personal Charges on PEX card

**It happens. We’d rather it didn’t, but it does. Please keep an eye out when making purchases to avoid this.
**Should it happen, let us know as soon as you know. Otherwise, we will reach out to you about it and figure out a reimbursement method, typically Chase Quickpay or Paypal. We might turn off your PEXcard if we are concerned you’ve gone rogue, but will reactivate it as soon as the issue is resolved.
*Accidental PEX Charges on personal card
**This is handled the same as other reimbursements.
**See the “Reimbursements” form on the wiki and contact us if you can’t find the form and would like us to send it to you.

*Closing Notes

**Additionally, please remember that we are volunteers as well, and that sometimes someone else is doing something silly that has bumped itself to the top of our priority list. There are approximately 30 cards that we manage currently, each with its own set of snafus in addition to a myriad of other tasks. When you send us messages or requests, help us help you by being concise and clear in what you are asking.

With that in mind, if you are in a pickle feel free to *politely* ping us if you haven’t heard back in a while.