PS:1 Wiki Dev - User contributions [en]

Lulzbot Taz3

2015-04-01T19:37:57Z

Ironwill:

{{Template:EquipmentPage
|owner = PS:One
|certification = yes
|hackable = no
|model = Aleph Objects Taz3
|serial = KT-PR0013-5509
|arrived = January 2014
|doesitwork = no
|contact = Elizabeth
|where = [[CNC]] 2nd Floor
|value = $2395
|image = Taz3.jpg
}}

== Status ==
Extruder nozzle clogged. Needs unclogging or nozzle replacement.

== Operation ==
* Turn the printer off when you are no longer using it.

== Mods ==
Factory standard settings, accessories and equipment. Alternate Flexistruder available at PS1 but not installed.

=== Windows Drivers ===
Windows users driving the printer tethered (over a USB cable) will need to [https://www.lulzbot.com/support/TAZ install drivers.]

=== Usable Print Area ===
298mm x 275mm x 250mm (11.7in x 10.8in x 9.8in)

=== Nozzle size ===
* 0.35 mm nozzle (please verify?)

=== Host Software ===
Users of Linux, Windows, OSX will need to install the following software:
* [https://github.com/kliment/Printrun#getting-printrun Pronterface] - or [http://www.repetier.com/download/ Repeteir-Host] for manual operation of the printer as well as for starting print jobs
* [http://slic3r.org/download Slic3r] - for creating gcode (print jobs) from 3D models
* Additionally, Lulzbot provides a [http://devel.lulzbot.com/TAZ/2.1/software/2013Q4/slic3r/config/pt35mm-nozzle/medium_ABS_no-support_pt35nzl_pt2-layer-height_config.ini slic3r config file] for the Taz3
* Alternately, you can use [http://wiki.ultimaker.com/Cura Cura by Ultimaker]

== Suggested Settings ==

Both of these files have appropriate settings for the 'printer settings' and 'filament settings' tabs. To use them, go to File > Load Config in Slic3r and select the downloaded file. You must then go to each tab and hit the 'save' icon next to the settings selection dropdown box, or else Slic3r will forget the settings when you close it.

==== ABS Print Settings Without Support - Fast ====

[[File: Taz3_print_settings_NO_SUPPORT.ini]]

This file is for the 'print settings' tab of Slic3r. This is a 'fast' profile, geared towards finishing prints relatively quickly. It still provides excellent surface quality. This profile does not include support, so for large overhangs you'll need the next configuration file.

==== ABS Print Settings With Support - Fast ====

[[File: Taz3_print_settings_SUPPORT.ini]]

This file is for 'print settings' tab of Slic3r. This is a 'fast' profile, geared towards finishing prints relatively quickly. It still provides excellent surface quality. This profile includes support, appropriate for large overhangs.

== Other Resources ==
[http://download.lulzbot.com/TAZ/3.0/documentation/2013Q4/LulzBot_TAZ_3.0-User_Manual-ebook.pdf The manual is available online]. A printed form of it can be found near the printer. The manual explains how to operate the printer.

=== Filament ===

The extruder usually mounted accepts 3 mm filament, and can print either ABS or PLA. There is an alternate extruder for use with Ninjaflex.

[https://www.inventables.com/categories/materials/3d-printer-filament Inventables]

[http://www.monoprice.com/Search/Index?keyword=3d+printer+filament Monoprice]

=== Find Something to Print ===

[http://thingiverse.com Thingiverse] is a great place to find printable 3D models that other people have designed, and to publish your own.

=== Designing 3D Models ===

Page in progress to describe [https://wiki.pumpingstationone.org/3D_Modeling 3D modeling.]

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! qualified member
! trained by
|-
|[[User:Dbever|Derek Bever]]
|Hours of shouting at 3D printers
|-
|Elizabeth Koprucki
|Derek Bever
|-
|Andrew Kos
|Elizabeth Koprucki
|-
|[[User:rdoeksen|Ray Doeksen]]
|Elizabeth Koprucki
|-
|[[User:Negativek|Everett Wilson]]
|Derek Bever
|-
|[[User:daveplays|David Earley]]
|Derek Bever
|-
|[[User:Lyn|Lyn Cole]]
|Derek Bever
|-
|[[User:nerobro|Greg Teiber]]
|Derek Bever
|-
|[[User:nick|Nick Castillo]]
|Derek Bever
|-
|[[User:tom4writer|Tom Forajter]]
|Elizabeth Koprucki
|-
|[[User:dditzler|David Ditzler]]
|Elizabeth Koprucki
|-
|[[User:davidfell|David Fell]]
|Elizabeth Koprucki
|-
|[[user:rob|Rob Riggs (Colorado Rob)]]
|Elizabeth
|-
|Mark Stevens
|Elizabeth Koprucki
|-
|[[User:ad9581|Arturo Duarte]]
|Elizabeth Koprucki
|-
|[[User:justin|Justin T. Conroy]]
|Derek Bever
|-
|[[User:jivnyahoo|James Porter]]
|Elizabeth Koprucki
|-
|[[User:ryankelly11|Ryan Kelly]]
|Elizabeth Koprucki
|-
|[[User:JanetD|Janet Dornhoff]]
|Elizabeth Koprucki
|-
|Genevieve Aphrodite
|Justin Conroy
|-
|Sloan Lavery
|Elizabeth Koprucki
|-
|[[User:spacekid|Adam Glick]]
|Ray Doeksen
|-
|[[User:funk|Tyler Natoli]]
|Elizabeth Koprucki
|-
|Chris Marchwick
|Elizabeth Koprucki
|-
|[[User:marty|Marty Dubin]]
|Elizabeth Koprucki
|-
|[[User:amishhammer|Tom Judge]]
|Justin Conroy
|-}
|-
|[[User:brian|Brian Dunn]]
|Derek Bever
|-|-
|[[User:lofgren|Tim Lofgren]]
|Derek Bever
|-
|[[User:lgaboarder|Jeff McBride]]
|Elizabeth Koprucki
|-
|Thomas Wright
|Justin Conroy
|-
|[[User:dsiegfried|David Siegfried]]
|Derek Bever
|-
|Donald Jacobson
|Elizabeth Koprucki
|-
|[[User:Sparr|Clarence Risher]]
|Elizabeth Koprucki
|-
|[[User:ironwill|Will Garza]]
|Elizabeth Koprucki
|-
|[[User:emertonom|Nick Halderman]]
|Elizabeth Koprucki
|-
|[[User:tactics|Michael Maloney]]
|Elizabeth Koprucki
|-
|[[User:tactics|Brennan Koziarz]]
|Elizabeth Koprucki
|-
|[[User:rogermoore|Roger Moore]]
|Elizabeth Koprucki
|-
|[[User:aaronmintz|Aaron Mintz]]
|Elizabeth Koprucki
|-
|[[User:mlm|Matt Makris]]
|Elizabeth Koprucki
|-
|Matt Meshulam
|Elizabeth Koprucki
|-
|Ron Olson
|Elizabeth Koprucki
|-
|[[User:daroldhiga|Darold Higa]]
|Ray Doeksen
|-
|Nora Sluzas
|Elizabeth Koprucki
|-
|Matt Triano
|Elizabeth Koprucki
|-
|Curtiss Cooke
|Elizabeth Koprucki
|-
|Andrew Sowa
|Elizabeth Koprucki
|-
|Eric Yu
|Elizabeth Koprucki
|-
|[[User:lucas|Lucas Goossen]]
|Elizabeth Koprucki
|-
|Jessica Wiedner
|Derek Bever
|-
|Scott Little
|Derek Bever
|-
|Kevin Pulver
|Ray Doeksen
|-
|Jenny Tong
|Ray Doeksen
|-
|Mike Mandrea
|Elizabeth Koprucki
|-
|John Farmer
|Elizabeth Koprucki
|-
|Andy Richardson
|Elizabeth Koprucki
|-
|Alex Trimm
|Elizabeth Koprucki
|-
|[[User:rickalm|Rick Alm]]
|Elizabeth Koprucki
|-
|Davis Mazariegos
|Elizabeth Koprucki
|-
|Knute Martell
|Elizabeth Koprucki
|-
|Hugh Sato
|Elizabeth Koprucki
|-
|Ryan Neuman
|Will Garza
|-
|[[User:Tina|Tina C]]
|Elizabeth Koprucki
|-
[[Category:Fabrication]]
[[Category:CNC]]

Lulzbot Taz3

2015-03-31T04:05:57Z

Ironwill:

{{Template:EquipmentPage
|owner = PS:One
|certification = yes
|hackable = no
|model = Aleph Objects Taz3
|serial = KT-PR0013-5509
|arrived = January 2014
|doesitwork = yes
|contact = Elizabeth
|where = [[CNC]] 2nd Floor
|value = $2395
|image = Taz3.jpg
}}

== Status ==
Extruder nozzle clogged. Needs unclogging or nozzle replacement.

== Operation ==
* Turn the printer off when you are no longer using it.

== Mods ==
Factory standard settings, accessories and equipment. Alternate Flexistruder available at PS1 but not installed.

=== Windows Drivers ===
Windows users driving the printer tethered (over a USB cable) will need to [https://www.lulzbot.com/support/TAZ install drivers.]

=== Usable Print Area ===
298mm x 275mm x 250mm (11.7in x 10.8in x 9.8in)

=== Nozzle size ===
* 0.35 mm nozzle (please verify?)

=== Host Software ===
Users of Linux, Windows, OSX will need to install the following software:
* [https://github.com/kliment/Printrun#getting-printrun Pronterface] - or [http://www.repetier.com/download/ Repeteir-Host] for manual operation of the printer as well as for starting print jobs
* [http://slic3r.org/download Slic3r] - for creating gcode (print jobs) from 3D models
* Additionally, Lulzbot provides a [http://devel.lulzbot.com/TAZ/2.1/software/2013Q4/slic3r/config/pt35mm-nozzle/medium_ABS_no-support_pt35nzl_pt2-layer-height_config.ini slic3r config file] for the Taz3
* Alternately, you can use [http://wiki.ultimaker.com/Cura Cura by Ultimaker]

== Suggested Settings ==

Both of these files have appropriate settings for the 'printer settings' and 'filament settings' tabs. To use them, go to File > Load Config in Slic3r and select the downloaded file. You must then go to each tab and hit the 'save' icon next to the settings selection dropdown box, or else Slic3r will forget the settings when you close it.

==== ABS Print Settings Without Support - Fast ====

[[File: Taz3_print_settings_NO_SUPPORT.ini]]

This file is for the 'print settings' tab of Slic3r. This is a 'fast' profile, geared towards finishing prints relatively quickly. It still provides excellent surface quality. This profile does not include support, so for large overhangs you'll need the next configuration file.

==== ABS Print Settings With Support - Fast ====

[[File: Taz3_print_settings_SUPPORT.ini]]

This file is for 'print settings' tab of Slic3r. This is a 'fast' profile, geared towards finishing prints relatively quickly. It still provides excellent surface quality. This profile includes support, appropriate for large overhangs.

== Other Resources ==
[http://download.lulzbot.com/TAZ/3.0/documentation/2013Q4/LulzBot_TAZ_3.0-User_Manual-ebook.pdf The manual is available online]. A printed form of it can be found near the printer. The manual explains how to operate the printer.

=== Filament ===

The extruder usually mounted accepts 3 mm filament, and can print either ABS or PLA. There is an alternate extruder for use with Ninjaflex.

[https://www.inventables.com/categories/materials/3d-printer-filament Inventables]

[http://www.monoprice.com/Search/Index?keyword=3d+printer+filament Monoprice]

=== Find Something to Print ===

[http://thingiverse.com Thingiverse] is a great place to find printable 3D models that other people have designed, and to publish your own.

=== Designing 3D Models ===

Page in progress to describe [https://wiki.pumpingstationone.org/3D_Modeling 3D modeling.]

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! qualified member
! trained by
|-
|[[User:Dbever|Derek Bever]]
|Hours of shouting at 3D printers
|-
|Elizabeth Koprucki
|Derek Bever
|-
|Andrew Kos
|Elizabeth Koprucki
|-
|[[User:rdoeksen|Ray Doeksen]]
|Elizabeth Koprucki
|-
|[[User:Negativek|Everett Wilson]]
|Derek Bever
|-
|[[User:daveplays|David Earley]]
|Derek Bever
|-
|[[User:Lyn|Lyn Cole]]
|Derek Bever
|-
|[[User:nerobro|Greg Teiber]]
|Derek Bever
|-
|[[User:nick|Nick Castillo]]
|Derek Bever
|-
|[[User:tom4writer|Tom Forajter]]
|Elizabeth Koprucki
|-
|[[User:dditzler|David Ditzler]]
|Elizabeth Koprucki
|-
|[[User:davidfell|David Fell]]
|Elizabeth Koprucki
|-
|[[user:rob|Rob Riggs (Colorado Rob)]]
|Elizabeth
|-
|Mark Stevens
|Elizabeth Koprucki
|-
|[[User:ad9581|Arturo Duarte]]
|Elizabeth Koprucki
|-
|[[User:justin|Justin T. Conroy]]
|Derek Bever
|-
|[[User:jivnyahoo|James Porter]]
|Elizabeth Koprucki
|-
|[[User:ryankelly11|Ryan Kelly]]
|Elizabeth Koprucki
|-
|[[User:JanetD|Janet Dornhoff]]
|Elizabeth Koprucki
|-
|Genevieve Aphrodite
|Justin Conroy
|-
|Sloan Lavery
|Elizabeth Koprucki
|-
|[[User:spacekid|Adam Glick]]
|Ray Doeksen
|-
|[[User:funk|Tyler Natoli]]
|Elizabeth Koprucki
|-
|Chris Marchwick
|Elizabeth Koprucki
|-
|[[User:marty|Marty Dubin]]
|Elizabeth Koprucki
|-
|[[User:amishhammer|Tom Judge]]
|Justin Conroy
|-}
|-
|[[User:brian|Brian Dunn]]
|Derek Bever
|-|-
|[[User:lofgren|Tim Lofgren]]
|Derek Bever
|-
|[[User:lgaboarder|Jeff McBride]]
|Elizabeth Koprucki
|-
|Thomas Wright
|Justin Conroy
|-
|[[User:dsiegfried|David Siegfried]]
|Derek Bever
|-
|Donald Jacobson
|Elizabeth Koprucki
|-
|[[User:Sparr|Clarence Risher]]
|Elizabeth Koprucki
|-
|[[User:ironwill|Will Garza]]
|Elizabeth Koprucki
|-
|[[User:emertonom|Nick Halderman]]
|Elizabeth Koprucki
|-
|[[User:tactics|Michael Maloney]]
|Elizabeth Koprucki
|-
|[[User:tactics|Brennan Koziarz]]
|Elizabeth Koprucki
|-
|[[User:rogermoore|Roger Moore]]
|Elizabeth Koprucki
|-
|[[User:aaronmintz|Aaron Mintz]]
|Elizabeth Koprucki
|-
|[[User:mlm|Matt Makris]]
|Elizabeth Koprucki
|-
|Matt Meshulam
|Elizabeth Koprucki
|-
|Ron Olson
|Elizabeth Koprucki
|-
|[[User:daroldhiga|Darold Higa]]
|Ray Doeksen
|-
|Nora Sluzas
|Elizabeth Koprucki
|-
|Matt Triano
|Elizabeth Koprucki
|-
|Curtiss Cooke
|Elizabeth Koprucki
|-
|Andrew Sowa
|Elizabeth Koprucki
|-
|Eric Yu
|Elizabeth Koprucki
|-
|[[User:lucas|Lucas Goossen]]
|Elizabeth Koprucki
|-
|Jessica Wiedner
|Derek Bever
|-
|Scott Little
|Derek Bever
|-
|Kevin Pulver
|Ray Doeksen
|-
|Jenny Tong
|Ray Doeksen
|-
|Mike Mandrea
|Elizabeth Koprucki
|-
|John Farmer
|Elizabeth Koprucki
|-
|Andy Richardson
|Elizabeth Koprucki
|-
|Alex Trimm
|Elizabeth Koprucki
|-
|[[User:rickalm|Rick Alm]]
|Elizabeth Koprucki
|-
|Davis Mazariegos
|Elizabeth Koprucki
|-
|Knute Martell
|Elizabeth Koprucki
|-
|Hugh Sato
|Elizabeth Koprucki
|-
|Ryan Neuman
|Will Garza
|-
|[[User:Tina|Tina C]]
|Elizabeth Koprucki
|-
[[Category:Fabrication]]
[[Category:CNC]]

Lincoln Electric 100 WeldPak

2015-03-29T20:06:23Z

Ironwill: /* List of Currently Certified Users */

{{Template:EquipmentPage
|owner=Dan Meyer
|model=Lincoln Electric 100 WeldPak AKA "MIG 1"
|serial=n/a|arrived=2009
|doesitwork=yes
|contact=Dan Meyer
|where=Welding Lab
|certification=yes
|hackable=no
|value=$500
|image=WeldPak100.jpg
}}
'''!!! CAUTION !!!''' Our welders are 20% duty cycle which means we can only be welding 2 minutes out of every 10 minutes or the welding unit may be ruined, if you weld for 2 minutes wait 8 minutes for the welder to cool. 
 
Welding Lens Shade 9 or 10 is the safe recommended welding lens.

OWNERS MANUAL: [[File:Lincoln_Electric_100.pdf]]
 
== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Jordan Bunker
|Self taught, Dan Meyer
|-
|Josh Kreuger
|Self Taught
|-
|Eric Michaud
|Self Taught
|-
|Todd Freeman
|Professional training
|-
|Tim Saylor
|Nat class
|-
|Nathan Witt
|Josh Kreuger
|-
|Brian Sutherland
|Tim Saylor
|-
|Karol Slowikowski
|[[User:kuroishi|David Koppel]]
|-
|Patrick Callahan
|Tim Saylor
|-
|Geoffrey Topham
|Eric Michaud
|-
|[[User:Meistertek|Dan Meyer]]
|Prairie State College: A.A.S. Manufacturing Technology 1993
|-
|Jeremy Bloyd-Peshkin
|3 years on the job
|-
|Kathy Whisler
|Dan Meyer
|-
|Shawn Blaszak
|Dan Meyer
|-
|Rick Futhark
|Dan Meyer
|-
|William McShane
|Dan Meyer
|-
|Jeff Cymbalski
|Dan Meyer
|-
|Joe Fallon
|Dan Meyer
|-
|Dan Locks
|Dan Meyer
|-
|Dustin Mitchell
|Dan Meyer
|-
|Christopher Lee Fanning
|Dan Meyer
|-
|Adam Davis
|Dan Meyer
|-
|Brian Chojnowski
|Dan Meyer
|-
|Sacha DeAngeli
|Dan Meyer
|-
|Steve Finkelman
|Dan Meyer
|-
|Keith Hoffmann
|Dan Meyer
|-
|Steve Farkas
|Dan Meyer
|-
|Gary Friedlander
|Dan Meyer
|-
|Jay Hopkins
|Dan Meyer
|-
|Mike Warot
|Dan Meyer
|-
|Rosanna Lloyd
|Dan Meyer
|-
|Colin Parsons
|Dan Meyer
|-
|Tucker Tomlinson
|Dan Meyer
|-
|Ryan Pierce
|Dan Meyer
|-
|Jessica Cobb
|Dan Meyer
|-
|Charlie Stauffer
|Dan Meyer
|-
|Michael Skilton
|Dan Meyer
|-
|William Ching
|Dan Meyer
|-
|Michael Skilton
|Dan Meyer
|-
|Brian Sheppard
|Dan Meyer
|-
|Kevin Caughlin
|Dan Meyer
|-
|Justin Bozarth
|Dan Meyer
|-
|Justin Miles
|Dan Meyer
|-
|Derek Bever
|Tucker Tomlinson
|-
|Shea Johns
|Derek Bever
|-
|Zachary Fietch
|Derek Bever
|-
|Dave Schact
|Mike Warot
|-
|Tom Forajter
|Dave Schact
|-
|Aaron Feigen
|Dave Schact
|-
|Michael Leinartas
|Dave Schact
|-
|Ray Doeksen
|Dave Schact
|-
|Eric Stein
|Dave Schact
|-
|Kris Huisinga
|Dave Schact
|-
|Elizabeth Koprucki
|Dave Schact
|-
|Darin Wike
|Adrianna McKinley
|-
|Tina Croniser
|Dave Schact
|-
|[[User:Scyg|Simon Cygielski]]
|Dave Schact
|-
|Robert Grossman
|Derek Bever
|-
|Adam Glick
|Derek Bever
|-
|Eric K.
|Dave Schact
|-
|Eddie Muela
|Derek Bever
|-
|Samuel Swope
|Derek Bever
|-
|Casey Olson
|Dave Schact
|-
|Jim Grady
|Dave Schact
|-
|[[User:Amishhammer|Tom Judge]]
|Dave Schact
|-
|[[User:Negativek|Everett Wilson]]
|Tom Judge
|-
|Jason Shanfield
|Dave Schact
|-
|[[User:kuroishi|David Koppel]]
|Tom Judge
|-
|Thomas Wright
|Tom Judge
|-
|Chris Agocs
|Tom Judge
|-
|Anna Yu
|Tom Judge
|-
|Bryan Gleason
|Tom Judge
|-
|Michael Leinartas
|Dave Schact
|-
|Sonia Yaco
|Tom Judge
|-
|Arjun Wadnerkar
|Tom Judge
|-
|David Srebro
|Ron Olson
|-
|Glenn Powers
|Ron Olson
|-
|Chris Kleehammer
|Ron Olson
|-
|Will Garza
|Ron Olson
|}
{{Template:Training|links=
 [http://en.wikipedia.org/wiki/Flux-cored_arc_welding Flux-cored arc welding]
 [http://en.wikipedia.org/wiki/Gas_metal_arc_welding Gas metal arc welding]
 [http://youtu.be/kI7GOVrB33c Flux Cored Welding Basics]
 [http://www.weldingtipsandtricks.com/lincoln-mig-welder.html Welding Tips and Tricks for Lincoln Mig and Flux Core Welders]
 [http://www.weldingtipsandtricks.com/mig-welding-tips-articles.html 20 Best Mig Tips]
 [http://youtu.be/DEDHR-Nst6E MIG Welding Basics for Farm and Automotive Repairs]
 [http://www.lincolnelectric.com/en-us/equipment/retail-products/pages/product=k2513-1.aspx WELD-PAK® 125HD 120/1/60 Information]
 [http://www.lincolnelectric.com/assets/servicenavigator-public/lincoln3/imt891.pdf WELD-PAK® 125HD Manual]
 [http://www.lincolnelectric.com/en-us/education-center/welding-safety/Pages/welding-safety.aspx Arc Welding Safety]
 [http://www.weldingtipsandtricks.com/welding-safety.html Welding Safety Tips AKA how not to kill your ass!]
 [http://youtu.be/nqVxqp9sqio Intro Portable POWER MIG® Family]
 [http://youtu.be/Zsbd2tHib5g POWER MIG® Quick Start, Pt 1]
 [http://youtu.be/QI-G_0kC0ZY POWER MIG® Quick Start, Pt 2]
}}

== Suggested Personal Equipment and Supplies ==
{| class="wikitable" border="1"
! Item
! Description
! Supplier
! Cost
|-
|KH643
|Lincoln Electric Premium Leather Welding Gloves
|Home Depot
|$14.47
|-
|KH643
|Alternative to above, MIG Welding Glove Grain Pigskin, 4" Gauntlet Cuff, Gold
|McMaster
|$12.69
|-
|19056
|Nice affordable auto darkening helmet, Northern Industrial 3 13/16 x 1 3/4 in. Welding Helmet with variable shade #9-13
|http://www.northerntool.com
|$64.99
|-
|KH530
|Lincoln Electric Straight-Head Chipping Hammer
|Home Depot
|$5.97
|-
|KH585
|Lincoln Electric Wooden Shoe Handle Carbon Steel Brush
|Home Depot
|$2.47
|-
|5367T9
|Lightweight Cotton Welding Clothing Jacket, 30" Length
|McMaster
|$23.00
|-
|5340T61
|Alternative to above jacket for cooler welding, Leather Cape Sleeves, 13" Length
|McMaster
|$46.51
|-
|5340T41
|Goes with Cape Sleeves above, Cape-Sleeve Bib, 19" Length
|McMaster
|$13.81
|-
|5263T45
|If you are going to be doing a ton of welding, Heavy Duty Leather Welding Clothing Chaps
|McMaster
|$42.56
|-
|ED030584
|Lincoln Electric Innershield 0.035 in. NR211 Flux-Cored Welding Wire 1 lb.
|Home Depot
|$10.97
|-
|7678A674
|Alternative to above, MIG Welding Wire E71T-GS Flux Core Steel, .035" Dia, 2 lb Spool
|McMaster
|$16.67
|-
|KH726
|Lincoln Electric Flux-Cored Welding Nozzle
|Home Depot
|$3.97
|-
|KH712
|Lincoln Electric 7/200 in. Wire Feed Welder Contact Tip 035” (0.9 mm) Contact Tips (Qty. 3)
|Home Depot
|$8.97
|-
|78375A608
|Alternative to above, Tweco #11-35 Contact Tip, .035" Wire Size, packs of 10
|McMaster
|$6.00
|-
|6511K29
|Stock for practice, Low Carbon Steel Round Edge Rectangular Bar 1/16" Thick, 1-1/2" Wide, 6' Length
|McMaster
|$15.53
|-
|'''Upgrades for our welders'''
|Some of these items have been added to our welders
|
|
|-
||K2526-1
|To add gas shielding and MIG (GMAW) capability including welding aluminum: Lincoln Electric MIG Conversion Kit with 1/4 in. Regulator with Gauge
|Home Depot
|$121.00
|-
|K2532-1
|Magnum 100SG spool gun, air-cooled for welding aluminum
|Airgas Mid America
|$200
|-
|Various
|Argon (for aluminum)and Agrgon/CO2 blend (for steel) gasses, $170 for cylinder, $30-40 for gas
|Airgas Mid America
|$210
|-
|KH495
|Small canvas cover for welders
|Airgas Mid America
|$25
|-
|}

[[Category:Hot Shop Equipment]]
[[Category:Fabrication]]
[[Category:Metalworking]]
[[Category:Certification Clarification Needed]]

Sense 3D Scanner

2015-03-10T02:53:29Z

Ironwill: Redirected page to Cubify Sense 3d Scanner

#REDIRECT [[Cubify Sense 3d Scanner]]

3dSystems CubePro

2015-02-17T22:03:49Z

Ironwill: /* Maintenance */

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = ??
|hackable = no
|model = CubePro
|arrived = 2014
|image = Cube Pro.jpeg
|doesitwork = yes
|contact = Elizabeth, Derek, Daniel
|where = 3d Printer Row
|value = $4400
}}

== Getting Started ==

Use the Computer to the right of the Cube pro to prepare your files using the Cube pro software, then export the file to a thumbdrive and plug it into the usb port on the left side of the printer itself. Select the file you prepared from the print menu using the touch screen on the front of the printer.
[[File:Cube pro usb slot.jpeg|left|thumb|USB Port]][[File:Cube Pro touchscreen.jpeg|center|thumb|touchscreen]]

== Documentation ==

[http://cubify.com/en/CubePro/Activate CubePro 3D Printer activation page]

Calibration prints (specific to filament type):
[[File:Cubepro calibration files.zip]]

[http://cubify.s3.amazonaws.com/public/cubepro/cubepro_user_guide.pdf CubePro 3D Printer]

== Notes ==
Filament (ABS, PLA, Nylon some time after August of 2014) comes in [http://cubify.com/en/CubePro/Supplies DRMed canisters from CubePro] at approximately 500 grams for $99.

== Maintenance ==
Print bed leveled and fully calibrated on 2/12/15 by Will Garza

[[Category:CNC]]

Cubify Sense 3d Scanner

2015-02-17T22:01:33Z

Ironwill:

{{Template:EquipmentPage
|owner = PS:One
|serial = 1405210468
|certification = no
|hackable = no
|model = Sense
|arrived = 2014
|image = Sense 3d Scanner.jpeg
|doesitwork = yes
|contact = Will Garza, Ray Dokosen
|where = On top of Cubepro 3d Printer
|value = $400
}}
== Getting Started ==
#Download the sense software to your laptop (PC/Mac): http://cubify.com/en/Products/SenseActivate
#Install the software
#When prompted input 7205 as registration code
#Follow on screen instructions to begin scanning

*The sense software is also installed on the computer to the right of the cube pro, but is impractical to use from an immobile desktop tower

[[File:Sense 3d Scanner location.jpeg|left|thumb|Sense 3d Scanner Location]]

== Documentation ==

[http://cubify.com/en/Products/SenseActivate Sense 3D Scanner activation page]

[[File:Sense userguide mac.pdf|Sense userguide mac.pdf]]

[[File:Sense userguide pc.pdf]]

[[Category:CNC]]

Cubify Sense 3d Scanner

2015-02-17T21:53:57Z

Ironwill: /* Getting Started */

3dSystems CubePro

2015-02-17T20:17:16Z

Ironwill:

Cubify Sense 3d Scanner

2015-02-17T20:09:17Z

Ironwill:

{{Template:EquipmentPage
|owner = PS:One
|serial = 1405210468
|certification = no
|hackable = no
|model = Sense
|arrived = 2014
|image = Sense 3d Scanner.jpeg
|doesitwork = yes
|contact = Will Garza, Ray Dokosen
|where = On top of Cubepro 3d Printer
|value = $400
}}
== Getting Started ==
#Download the sense software to your laptop (PC/Mac): http://cubify.com/en/Products/SenseActivate
#Install the software
#when prompted input 7027 as registration code
#Follow on screen instructions to begin scanning

*The sense software is also installed on the computer to the right of the cube pro, but is impractical to use from an immobile desktop tower

[[File:Sense 3d Scanner location.jpeg|left|thumb|Sense 3d Scanner Location]]
== Documentation ==

[http://cubify.com/en/Products/SenseActivate Sense 3D Scanner activation page]

[[File:Sense userguide mac.pdf|Sense userguide mac.pdf]]

[[File:Sense userguide pc.pdf]]

== Maintenance ==

[[Category:CNC]]

Cubify Sense 3d Scanner

2015-02-17T20:07:14Z

Ironwill:

{{Template:EquipmentPage
|owner = PS:One
|serial = 1405210468
|certification = no
|hackable = no
|model = Sense
|arrived = 2014
|image = Sense 3d Scanner.jpeg
|doesitwork = yes
|contact = Will Garza, Ray Dokosen
|where = On top of Cubepro 3d Printer
|value = $400
}}
== Getting Started ==
#Download the sense software to your laptop (PC/Mac): http://cubify.com/en/Products/SenseActivate
#Install the software
#when prompted input 7027 as registration code
#Follow on screen instructions to begin scanning

*The sense software is also installed on the computer to the right of the cube pro, but is impractical to use from an immobile desktop tower

[[File:Sense 3d Scanner location.jpeg|left|thumb|Sense 3d Scanner Location]]
== Documentation ==

[http://cubify.com/en/Products/SenseActivate Sense 3D Scanner activation page]

[[File:Sense userguide mac.pdf|MAC manual]]

[[File:Sense userguide pc.pdf|PC Manual]]

== Maintenance ==

[[Category:CNC]]

File:Sense userguide pc.pdf

2015-02-17T20:03:24Z

Ironwill: Manual for Sense 3d Scanner (PC ONLY)

Manual for Sense 3d Scanner (PC ONLY)

File:Sense userguide mac.pdf

2015-02-17T20:01:05Z

Ironwill: Manual for Sense 3d Scanner (MAC ONLY)

Manual for Sense 3d Scanner (MAC ONLY)

File:Sense 3d Scanner location.jpeg

2015-02-17T19:55:45Z

Ironwill:

File:Sense 3d Scanner.jpeg

2015-02-17T19:55:06Z

Ironwill:

Cubify Sense 3d Scanner

2015-02-17T19:44:09Z

Ironwill: Created page with "{{Template:EquipmentPage |owner = PS:One |serial = 1405210468 |certification = no |hackable = no |model = Sense |arrived = 2014 |image = Cube Pro.jpeg |doesitwork = yes |conta..."

{{Template:EquipmentPage
|owner = PS:One
|serial = 1405210468
|certification = no
|hackable = no
|model = Sense
|arrived = 2014
|image = Cube Pro.jpeg
|doesitwork = yes
|contact = Will Garza, Ray Dokosen
|where = On top of Cubepro 3d Printer
|value = $400

== Getting Started ==
#Download the sense software to your laptop (PC/Mac): http://cubify.com/en/Products/SenseActivate
#Install the software
#when prompted input ?7027? as registration code
#Follow on screen instructions to begin scanning

the sense software is installed on the computer to the right of the cube pro as well, but is impractical to use from an immobile desktop tower

== Documentation ==

[http://cubify.com/en/Products/SenseActivate Sense 3D Scanner activation page]

== Maintenance ==

[[Category:CNC]]

Shark Euro-Pro vacuum

2015-02-14T22:52:02Z

Ironwill:

{{Template:EquipmentPage
|owner=Will Garza
|model=Shark Euro Pro EP601
|serial=
|arrived=February 2015
|doesitwork=yes
|contact=Will Garza
|where=2nd floor comms room
|certification= no
|hackable=no
|value=$50
|image = Shark EP601.JPG
}} 

Use it to clean the lounge, arts and crafts or electronics area. Please do not use it in the Shop. Return it to the comms room when you are done.

[[File:Shark euro pro location.jpeg|200px|left| ''Where the Shark Vacuum goes'']]

[[File:Shark EP601 Manual.pdf]]

[[Category:Cleaning]]

Shark Euro-Pro vacuum

2015-02-14T22:48:42Z

Ironwill:

{{Template:EquipmentPage
|owner=Will Garza
|model=Shark Euro Pro EP601
|serial=
|arrived=February 2015
|doesitwork=yes
|contact=Will Garza
|where=2nd floor comms room
|certification= no
|hackable=no
|value=$50
|image = Shark EP601.JPG
}} 

Use it to clean the lounge, arts and crafts or electronics area. Please do not use it in the Shop. Return it to the comms room when you are done.

[[File:Shark euro pro location.jpeg|thub|left|Where the Shark Vacuum goes]]

[[File:Shark EP601 Manual.pdf]]

[[Category:Cleaning]]

Shark Euro-Pro vacuum

2015-02-14T22:47:01Z

Ironwill:

{{Template:EquipmentPage
|owner=Will Garza
|model=Shark Euro Pro EP601
|serial=
|arrived=February 2015
|doesitwork=yes
|contact=Will Garza
|where=2nd floor comms room
|certification= no
|hackable=no
|value=$50
|image = Shark EP601.JPG
}} 

Use it to clean the lounge, arts and crafts or electronics area. Please do not use it in the Shop. Return it to the comms room when you are done.

[[File:Shark euro pro location.jpeg|framless|border|200px|Where the Shark Vacuum goes]]

[[File:Shark EP601 Manual.pdf]]

[[Category:Cleaning]]

Shark Euro-Pro vacuum

2015-02-14T22:46:34Z

Ironwill:

{{Template:EquipmentPage
|owner=Will Garza
|model=Shark Euro Pro EP601
|serial=
|arrived=February 2015
|doesitwork=yes
|contact=Will Garza
|where=2nd floor comms room
|certification= no
|hackable=no
|value=$50
|image = Shark EP601.JPG
}} 

Use it to clean the lounge, arts and crafts or electronics area. Please do not use it in the Shop. Return it to the comms room when you are done.[[File:Shark euro pro location.jpeg|framless|border|200px|Where the Shark Vacuum goes]]

[[File:Shark EP601 Manual.pdf]]

[[Category:Cleaning]]

Shark Euro-Pro vacuum

2015-02-14T22:45:38Z

Ironwill:

{{Template:EquipmentPage
|owner=Will Garza
|model=Shark Euro Pro EP601
|serial=
|arrived=February 2015
|doesitwork=yes
|contact=Will Garza
|where=2nd floor comms room
|certification= no
|hackable=no
|value=$50
|image = Shark EP601.JPG
}} 

Use it to clean the lounge, arts and crafts or electronics area. Please do not use it in the Shop. Return it to the comms room when you are done.[[File:Shark euro pro location.jpeg|framless|border|px200|Where the Shark Vacuum goes]]

[[File:Shark EP601 Manual.pdf]]

[[Category:Cleaning]]

Shark Euro-Pro vacuum

2015-02-14T22:45:21Z

Ironwill:

{{Template:EquipmentPage
|owner=Will Garza
|model=Shark Euro Pro EP601
|serial=
|arrived=February 2015
|doesitwork=yes
|contact=Will Garza
|where=2nd floor comms room
|certification= no
|hackable=no
|value=$50
|image = Shark EP601.JPG
}} 

Use it to clean the lounge, arts and crafts or electronics area. Please do not use it in the Shop. Return it to the comms room when you are done.[[File:Shark euro pro location.jpeg|framless|border|Where the Shark Vacuum goes]]

[[File:Shark EP601 Manual.pdf]]

[[Category:Cleaning]]

Shark Euro-Pro vacuum

2015-02-14T22:44:36Z

Ironwill:

{{Template:EquipmentPage
|owner=Will Garza
|model=Shark Euro Pro EP601
|serial=
|arrived=February 2015
|doesitwork=yes
|contact=Will Garza
|where=2nd floor comms room
|certification= no
|hackable=no
|value=$50
|image = Shark EP601.JPG
}} 

Use it to clean the lounge, arts and crafts or electronics area. Please do not use it in the Shop. Return it to the comms room when you are done.[[File:Shark euro pro location.jpeg|thumb|Where the Shark Vacuum goes]]

[[File:Shark EP601 Manual.pdf]]

[[Category:Cleaning]]

Shark Euro-Pro vacuum

2015-02-14T22:44:07Z

Ironwill:

{{Template:EquipmentPage
|owner=Will Garza
|model=Shark Euro Pro EP601
|serial=
|arrived=February 2015
|doesitwork=yes
|contact=Will Garza
|where=2nd floor comms room
|certification= no
|hackable=no
|value=$50
|image = Shark EP601.JPG
}} 

Use it to clean the lounge, arts and crafts or electronics area. Please do not use it in the Shop. Return it to the comms room when you are done.

[[File:Shark euro pro location.jpeg|thumb|Where the Shark Vacuum goes]]

[[File:Shark EP601 Manual.pdf]]

[[Category:Cleaning]]

Shark Euro-Pro vacuum

2015-02-14T22:40:56Z

Ironwill:

{{Template:EquipmentPage
|owner=Will Garza
|model=Shark Euro Pro EP601
|serial=
|arrived=February 2015
|doesitwork=yes
|contact=Will Garza
|where=2nd floor comms room
|certification= no
|hackable=no
|value=$50
|image = Shark EP601.JPG
}} 

Use it to clean the lounge, arts and crafts or electronics area. Please do not use it in the Shop. Return it to the comms room when you are done.

[[File:Shark euro pro location.jpeg]]

[[File:Shark EP601 Manual.pdf]]

[[Category:Cleaning]]

File:Shark euro pro location.jpeg

2015-02-14T22:40:26Z

Ironwill:

Shark Euro-Pro vacuum

2015-02-14T22:27:18Z

Ironwill:

{{Template:EquipmentPage
|owner=Will Garza
|model=Shark Euro Pro EP601
|serial=
|arrived=February 2015
|doesitwork=yes
|contact=Will Garza
|where=2nd floor comms room
|certification= no
|hackable=no
|value=$50
|image = Shark EP601.JPG
}} 

Use it to clean the lounge, arts and crafts or electronics area. Please do not use it in the Shop.

[[File:Shark EP601 Manual.pdf]]

[[Category:Cleaning]]

File:Shark EP601 Manual.pdf

2015-02-14T22:26:44Z

Ironwill:

File:Shark EP601.JPG

2015-02-14T22:24:52Z

Ironwill: Ironwill uploaded a new version of File:Shark EP601.JPG

Shark Euro-Pro vacuum

2015-02-14T22:20:29Z

Ironwill: Created page with "{{Template:EquipmentPage |owner=Will Garza |model=Shark Euro Pro EP601 |serial= |arrived=February 2015 |doesitwork=yes |contact=Will Garza |where=2nd floor comms room |certifi..."

File:Shark EP601.JPG

2015-02-14T22:20:18Z

Ironwill:

Cleaning Supplies

2015-02-14T21:47:51Z

Ironwill:

We have a variety of cleaning equipment and supplies at Pumping station one, the list includes but is not limited to

*Shop vac
*[[Shark Euro-Pro vacuum]]

Cleaning Supplies

2015-02-14T21:46:32Z

Ironwill: Created page with "We have a variety of cleaning equipment and supplies at Pumping station one, the list includes but is not limited to Shop vac Shark Euro-Pro vacuum"

We have a variety of cleaning equipment and supplies at Pumping station one, the list includes but is not limited to

Shop vac
[[Shark Euro-Pro vacuum]]

File:Cube pro usb slot.jpeg

2015-02-12T20:20:11Z

Ironwill: Ironwill uploaded a new version of File:Cube pro usb slot.jpeg

Picture of the left side of the cube pro

3dSystems CubePro

2015-02-12T20:18:15Z

Ironwill: /* Getting Started */

3dSystems CubePro

2015-02-12T20:17:55Z

Ironwill: /* Getting Started */

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = ??
|hackable = no
|model = CubePro
|arrived = 2014
|image = Cube Pro.jpeg
|doesitwork = yes
|contact = Elizabeth, Derek, Daniel
|where = 3d Printer Row
|value = $4400
}}

== Getting Started ==

Use the Computer to the right of the Cube pro to prepare your files using the Cube pro software, then export the file to a thumbdrive and plug it into the usb port on the left side of the printer itself. Select the file you prepared from the print menu using the touch screen on the front of the printer.
[[File:Cube pro usb slot.jpeg|left|thumb|USB Port]]
[[File:Cube Pro touchscreen.jpeg|center|thumb|touchscreen]]

== Documentation ==

[http://cubify.com/en/CubePro/Activate CubePro 3D Printer activation page]

Calibration prints (specific to filament type):
[[File:Cubepro calibration files.zip]]

[http://cubify.s3.amazonaws.com/public/cubepro/cubepro_user_guide.pdf CubePro 3D Printer]

== Notes ==
Filament (ABS, PLA, Nylon some time after August of 2014) comes in [http://cubify.com/en/CubePro/Supplies DRMed canisters from CubePro] at approximately 500 grams for $99.

== Maintenance ==

[[Category:CNC]]

3dSystems CubePro

2015-02-12T20:17:24Z

Ironwill: /* Getting Started */

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = ??
|hackable = no
|model = CubePro
|arrived = 2014
|image = Cube Pro.jpeg
|doesitwork = yes
|contact = Elizabeth, Derek, Daniel
|where = 3d Printer Row
|value = $4400
}}

== Getting Started ==

Use the Computer to the right of the Cube pro to prepare your files using the Cube pro software, then export the file to a thumbdrive and plug it into the usb port on the left side of the printer itself. Select the file you prepared from the print menu using the touch screen on the front of the printer.
[[File:Cube pro usb slot.jpeg|left|thumb|USB Port]]
[[File:Cube Pro touchscreen.jpeg|right|thumb|touchscreen]]

== Documentation ==

[http://cubify.com/en/CubePro/Activate CubePro 3D Printer activation page]

Calibration prints (specific to filament type):
[[File:Cubepro calibration files.zip]]

[http://cubify.s3.amazonaws.com/public/cubepro/cubepro_user_guide.pdf CubePro 3D Printer]

== Notes ==
Filament (ABS, PLA, Nylon some time after August of 2014) comes in [http://cubify.com/en/CubePro/Supplies DRMed canisters from CubePro] at approximately 500 grams for $99.

== Maintenance ==

[[Category:CNC]]

File:Cube Pro touchscreen.jpeg

2015-02-12T20:12:16Z

Ironwill: a picture showing the touchscreen on the front panel of the cube pro

a picture showing the touchscreen on the front panel of the cube pro

File:Cube pro usb slot.jpeg

2015-02-12T20:10:55Z

Ironwill: Picture of the left side of the cube pro

Picture of the left side of the cube pro

3dSystems CubePro

2015-02-12T20:09:47Z

Ironwill:

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = ??
|hackable = no
|model = CubePro
|arrived = 2014
|image = Cube Pro.jpeg
|doesitwork = yes
|contact = Elizabeth, Derek, Daniel
|where = 3d Printer Row
|value = $4400
}}

== Getting Started ==

Use the Computer to the right of the Cube pro to prepare your files using the Cube pro software, then export the file to a thuumbdrive and plug it into the usb port on the left side of the printer itself. Select the file you prepared from the print menu using the touch screen on the front of the printer.

== Documentation ==

[http://cubify.com/en/CubePro/Activate CubePro 3D Printer activation page]

Calibration prints (specific to filament type):
[[File:Cubepro calibration files.zip]]

[http://cubify.s3.amazonaws.com/public/cubepro/cubepro_user_guide.pdf CubePro 3D Printer]

== Notes ==
Filament (ABS, PLA, Nylon some time after August of 2014) comes in [http://cubify.com/en/CubePro/Supplies DRMed canisters from CubePro] at approximately 500 grams for $99.

== Maintenance ==

[[Category:CNC]]

File:Cube Pro.jpeg

2015-02-12T20:08:06Z

Ironwill: Ironwill uploaded a new version of File:Cube Pro.jpeg

Picture of the front of the cube pro trio

File:Cube Pro.jpeg

2015-02-12T20:01:03Z

Ironwill: Picture of the front of the cube pro trio

Picture of the front of the cube pro trio

3dSystems CubePro

2015-02-12T19:35:22Z

Ironwill: /* Getting Started */

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = ??
|hackable = no
|model = CubePro
|arrived = 2014
|doesitwork = yes
|contact = Elizabeth, Derek, Daniel
|where = 3d Printer Row
|value = $4400
}}

== Getting Started ==

Use the Computer to the right of the Cube pro to prepare your files using the Cube pro software, then export the file to a thuumbdrive and plug it into the usb port on the left side of the printer itself. Select the file you prepared from the print menu using the touch screen on the front of the printer.

== Documentation ==

[http://cubify.com/en/CubePro/Activate CubePro 3D Printer activation page]

Calibration prints (specific to filament type):
[[File:Cubepro calibration files.zip]]

[http://cubify.s3.amazonaws.com/public/cubepro/cubepro_user_guide.pdf CubePro 3D Printer]

== Notes ==
Filament (ABS, PLA, Nylon some time after August of 2014) comes in [http://cubify.com/en/CubePro/Supplies DRMed canisters from CubePro] at approximately 500 grams for $99.

== Maintenance ==

[[Category:CNC]]

3dSystems CubePro

2015-02-12T19:28:11Z

Ironwill: /* Documentation */

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = ??
|hackable = no
|model = CubePro
|arrived = 2014
|doesitwork = yes
|contact = Elizabeth, Derek, Daniel
|where = 3d Printer Row
|value = $4400
}}

== Getting Started ==

== Documentation ==

[http://cubify.com/en/CubePro/Activate CubePro 3D Printer activation page]

Calibration prints (specific to filament type):
[[File:Cubepro calibration files.zip]]

[http://cubify.s3.amazonaws.com/public/cubepro/cubepro_user_guide.pdf CubePro 3D Printer]

== Notes ==
Filament (ABS, PLA, Nylon some time after August of 2014) comes in [http://cubify.com/en/CubePro/Supplies DRMed canisters from CubePro] at approximately 500 grams for $99.

== Maintenance ==

[[Category:CNC]]

3dSystems CubePro

2015-02-12T19:27:01Z

Ironwill:

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = ??
|hackable = no
|model = CubePro
|arrived = 2014
|doesitwork = yes
|contact = Elizabeth, Derek, Daniel
|where = 3d Printer Row
|value = $4400
}}

== Getting Started ==

== Documentation ==

[http://cubify.com/en/CubePro/Activate]

Calibration prints (specific to filament type):
[[File:Cubepro calibration files.zip]]

[http://cubify.s3.amazonaws.com/public/cubepro/cubepro_user_guide.pdf CubePro 3D Printer]

== Notes ==
Filament (ABS, PLA, Nylon some time after August of 2014) comes in [http://cubify.com/en/CubePro/Supplies DRMed canisters from CubePro] at approximately 500 grams for $99.

== Maintenance ==

[[Category:CNC]]

File:Cubepro calibration files.zip

2015-02-12T19:26:11Z

Ironwill: Set of 5 Calibration files for the Cube Pro 3d printer

Set of 5 Calibration files for the Cube Pro 3d printer

3dSystems CubePro

2015-02-12T18:45:02Z

Ironwill:

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = ??
|hackable = no
|model = CubePro
|arrived = 2014
|doesitwork = yes
|contact = Elizabeth, Derek, Daniel
|where = 3d Printer Row
|value = $4400
}}

== Getting Started ==

== Documentation ==
[http://cubify.s3.amazonaws.com/public/cubepro/cubepro_user_guide.pdf CubePro 3D Printer]

== Notes ==
Filament (ABS, PLA, Nylon some time after August of 2014) comes in [http://cubify.com/en/CubePro/Supplies DRMed canisters from CubePro] at approximately 500 grams for $99.

== Maintenance ==

[[Category:CNC]]

Grizzly 6" jointer

2015-01-18T02:46:04Z

Ironwill: /* List of Currently Certified Users */

{{Template:EquipmentPage
|owner = Matt Triano
|certification=yes
|hackable = NO
|model = G0654
|serial = NA
|arrived = Sept 2013
|doesitwork = yes
|contact = Matt Triano
|where = Woodshop
|value = $525.00
|image = Jointer.jpg
}}
== Rules ==
# Always check your wood for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet.
# Remove the smallest amount of material possible and feed it at an appropriate speed. More passes are better than fewer. If you don't know how to properly adjust the infeed table, ask for help.
# Always use the vacuum while running the jointer. Otherwise, it will clog with chips.
# If you break something, or damage the tool, contact the area host immediately. Don't let others do more damage to the machine, ruin their work, or hurt themselves by using a broken tool.
# Always vacuum the machine, cutting area, and the table around the machine when you are done.

== Documentation ==
* [http://cdn0.grizzly.com/manuals/g0654_m.pdf Manual]
* [http://cdn0.grizzly.com/partslists/g0654_pl.pdf Parts List]

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Matt Triano
|Owner
|-
|Jason Shanfield
|Matt Triano
|-
|Sam Drazin
|Matt Triano
|-
|Eric Beauchamp
|Matt Triano
|-
|Ryan Pierce
|Matt Triano
|-
|Pete Noverini
|Matt Triano
|-
|Mike Coriale
|Matt Triano
|-
|Will Garza
|Matt Triano
|-|}

[[Category:Shop Equipment]]
[[Category:Woodworking]]

Vacuum table

2014-12-17T17:56:36Z

Ironwill: /* General */

{{Template:EquipmentPage
|owner = Khoi Nguyen
|certification=yes
|hackable = NO
|model = N/A
|serial = N/A
|arrived = Dec 2014
|doesitwork = yes
|contact = Khoi Nguyen
|where = Woodshop Under Worktable
|value = $500.00
|image = VacuumTable.jpg
}}

== General ==

This is a vacuum table for applying veneers and gluing delicate/hard to clamp items.

[[File:VacuumTable1.jpg|250px]]
Opening of bag
[[File:VacuumTablePump.jpg|250px]]
Vaccum Pump
[[File:Vaccumtabletanks.jpg|250px]]
Vaccum Tanks and Gauge

== Rules ==
# Use for Large flat objects or small delicate objects, '''Not''' for glueing dimensional lumber
#* If clamps can be used to achieve your goal, please use them instead
# '''ALWAYS''' Check for sharp edges on your work pieces, as they can puncture (read: ruin) the bag
#*use the extra piece of plastic over any work piece that you are gluing or has sharp corners
#*it is best to sand or otherwise smooth all corners of your work piece as well
#Check to make sure that the vacuum has stabilized at 21 before you leave your work unattended for curing time
#*if the vaccum does not turn off after 10-15 minutes of run time there may be a leak in the gasket that attaches the vacuum pump
#** If the cure time on your piece is less than an hour you can let it run, however you cannot run the vacuum pump run continuously for longer than that as you may damage it

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Khoi Nguyen
|Owner
|-
|Will Garza
|Khoi Nguyen
|-
|}

[[Category:Shop Equipment]]
[[Category:Woodworking]]

Vacuum table

2014-12-17T17:49:41Z

Ironwill: /* General */

{{Template:EquipmentPage
|owner = Khoi Nguyen
|certification=yes
|hackable = NO
|model = N/A
|serial = N/A
|arrived = Dec 2014
|doesitwork = yes
|contact = Khoi Nguyen
|where = Woodshop Under Worktable
|value = $500.00
|image = VacuumTable.jpg
}}

== General ==

This is a vacuum table for applying veneers and gluing delicate/hard to clamp items.

[[File:VacuumTable1.jpg|300px]]
Opening of bag
[[File:VacuumTablePump.jpg|300px]]
Vaccum Pump
[[File:Vaccumtabletanks.jpg|300px]]
Vaccum Tanks and Gauge

== Rules ==
# Use for Large flat objects or small delicate objects, '''Not''' for glueing dimensional lumber
#* If clamps can be used to achieve your goal, please use them instead
# '''ALWAYS''' Check for sharp edges on your work pieces, as they can puncture (read: ruin) the bag
#*use the extra piece of plastic over any work piece that you are gluing or has sharp corners
#*it is best to sand or otherwise smooth all corners of your work piece as well
#Check to make sure that the vacuum has stabilized at 21 before you leave your work unattended for curing time
#*if the vaccum does not turn off after 10-15 minutes of run time there may be a leak in the gasket that attaches the vacuum pump
#** If the cure time on your piece is less than an hour you can let it run, however you cannot run the vacuum pump run continuously for longer than that as you may damage it

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Khoi Nguyen
|Owner
|-
|Will Garza
|Khoi Nguyen
|-
|}

[[Category:Shop Equipment]]
[[Category:Woodworking]]

Vacuum table

2014-12-17T17:42:57Z

Ironwill: /* General */

{{Template:EquipmentPage
|owner = Khoi Nguyen
|certification=yes
|hackable = NO
|model = N/A
|serial = N/A
|arrived = Dec 2014
|doesitwork = yes
|contact = Khoi Nguyen
|where = Woodshop Under Worktable
|value = $500.00
|image = VacuumTable.jpg
}}

== General ==

This is a vacuum table for applying veneers and gluing delicate/hard to clamp items.

[[File:VacuumTable1.jpg]]
Opening of bag
[[File:VacuumTablePump.jpg]]
Vaccum Pump
[[File:Vaccumtabletanks.jpg]]
Vaccum Tanks and Gauge

== Rules ==
# Use for Large flat objects or small delicate objects, '''Not''' for glueing dimensional lumber
#* If clamps can be used to achieve your goal, please use them instead
# '''ALWAYS''' Check for sharp edges on your work pieces, as they can puncture (read: ruin) the bag
#*use the extra piece of plastic over any work piece that you are gluing or has sharp corners
#*it is best to sand or otherwise smooth all corners of your work piece as well
#Check to make sure that the vacuum has stabilized at 21 before you leave your work unattended for curing time
#*if the vaccum does not turn off after 10-15 minutes of run time there may be a leak in the gasket that attaches the vacuum pump
#** If the cure time on your piece is less than an hour you can let it run, however you cannot run the vacuum pump run continuously for longer than that as you may damage it

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Khoi Nguyen
|Owner
|-
|Will Garza
|Khoi Nguyen
|-
|}

[[Category:Shop Equipment]]
[[Category:Woodworking]]