PS:1 Wiki Dev - User contributions [en]

Supermax 25x2 Drum Sander

2018-12-07T23:29:59Z

Jimlund:

{{Template:EquipmentPage
|owner=PS:One
|model=25x2
|serial=?
|arrived=
|doesitwork=yes
|contact=[[user: ericbeau|Eric Beauchamp]]
|where=Wood Shop
|certification=yes
|hackable=no
|value=$2700
|image=SupermaxSander.jpg
|hostarea=Wood Shop
}}

== Status ==
Aug 30 2018 Eric B installed new motor and starter capacitor..
'''
DO NOT OPEN HOOD''' to push start as we did in recent past. Just push start button and adjust feed speed.

Stay tuned for more detailed instructions for use.

== Authorization ==

Authorization required. Part of the WoodShop overall authorization. See the PS1 calendar for future dates.

== Usage Notes ==

*For oily or dense woods (tropical hardwoods, etc), take only very light passes to prevent clogging the sandpaper.

*Use a belt cleaner occasionally to refresh the sandpaper

== Safety ==

This sander features overload detection. If the machine detects too high a load, it will automatically slow down the feed. This saves wear and tear on the machine, but may cause burning of the workpiece if you cut too aggressively.

*The height adjustment on this machine is VERY aggressive. A full turn will raise the table by more than 2mm (a typical cut should be < .5mm). '''PLEASE USE A MAXIMUM OF 1/8 TURN OF THE HEIGHT WHEEL PER PASS!'''

* Make your first cuts with a very slow speed (10 or less). Once you are sure the load is OK you can gradually increase the speed on subsequent passes.

*When overload detection kicks in, a red light next to the speed control will turn on. '''IF YOU SEE THIS LIGHT, PLEASE REDUCE YOUR DEPTH OF CUT AND/OR FEED RATE!'''

*Like all of our other sanders, sleeves must be above the elbow, and no gloves should be worn. It's pretty easy to get pulled into the rollers.

== Description ==

* Sanding Capacity:
** Maximum Width (in): 25
** Minimum Length (in): 3-1/2
** Minimum Thickness (in): 1/32
* Drum Speed: 1740 RPM
* Dust Hood: 1000 CFM recommended

==External Links==

*[http://www.supermaxtools.com/products/wood/25x2-double-drum-sander Manufacturer's Page]
*[http://www.supermaxtools.com/wp-content/uploads/25x2_37x2-10-2015.pdf Owner's Manual]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Eric Beauchamp
|Danger committee
|6/23/2017
|-
|Ralph Brendler
|Danger committee
|6/23/2017
|-
|Paul van Lake
|Danger committee
|6/23/2017
|-
|Zack Sasnow
|Jason Shanfield
|8/27/17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-
|Jared K
|Ralph Brendler
|12/14/17
|-
|[[User:atomala|Alex Tomala]]
|Ralph Brendler
|12/21/17
|-
|Chris Versteeg
|Ralph Brandler
|12/28/17
|-
|Aaron Vander Bee
|Ralph Brandler
|1/11/18
|-
|Ben Farmer
|Ralph Brendler
|1/11/18
|-
|Joseph Crouch
|Ralph Brendler
|1/11/18
|-
|Bradford Smith
|Ralph Brendler
|1/11/18
|-
|Stephanie Pelzer
|Ralph Brendler
|1/11/18
|-
|Amanda Assaley
|Ralph Brendler
|1/11/18
|-
|Chris Eppig
|Ralph Brendler
|1/11/18
|-
|Patrick Smith
|Ralph Brendler
|1/11/18
|-
|Jeff Gershune
|Paul VanLake
|1/16/18
|-
|Bryan Pennington
|Ralph Brendler
|1/25/18
|-
|Michael Ice
|Ralph Brendler
|2/08/18
|-
|Brandon Kennedy
|Ralph Brendler
|2/22/18
|-
|Rolf Scheidt
|Ralph Brendler
|2/22/18
|-
|Dan Mach
|Ralph Brendler
|3/8/18
|-
|Bruce Mace
|Ralph Brendler
|3/8/18
|-
|Ricardo Staudt
|Ralph Brendler
|3/8/18
|-
|Nick Prorok
|Ralph Brendler
|3/8/18
|-
|Paul Graham
|Ralph Brendler
|3/22/18
|-
|Mike Gucciard
|Ralph Brendler
|3/22/18
|-
|[[User:waynr|Wayne Warren]]
|Ralph Brendler
|3/22/18
|-
|Adam Hall
|Paul V
|3/29/18
|-
|Bill Schroeder
|Ralph Brendler
|4/5/18
|-
|Mike Wilkin
|Ralph Brendler
|4/19/18
|-
|Alex Lanigan
|Ralph Brendler
|4/19/18
|-
|Jessica Jokhi
|Ralph Brendler
|4/19/18
|-
|Jonathan Frink
|Ralph Brendler
|4/19/18
|-
|4/19/18|Gary Newhouse
|Ralph Brendler
|4/26/18
|-}
|Dave DesRoberts
|Paul Van Lake
|4/26/18
|-
|Jennifer DesRoberts
|Paul Van Lake
|4/26/18
|-
| Wayne Hendryx
| Ralph Brendler
| 4/19/18
|-
| Kirsten Landmark Masih
| Ralph Brendler
| 6/07/18
|-
| Sam Wallinga
| Ralph Brendler
| 6/14/18
|-
| Bob Fritz
| Ralph Brendler
| 6/14/18
|-
| Nate Myren
| Ralph Brendler
| 6/14/18
|-
| Eli Schlossberg
| Ralph Brendler
| 6/14/18
|-
| Tyler Works
| Ralph Brendler
| 6/14/18
|-
| Daniel Willmott
| Paul V
| 6/21/18
|-
| Bruce Levin
| Paul V4
|-
| Joe Day
| Paul V
| 7/05/18
|-
| Mike Yacobucci
| Ralph Brendler
| 7/12/18
|-
| Kathryn Connolly
| Paul V
| 7/19/18
|-
| Sam Lewis
| Paul V
| 7/19/18
|-
| Sam Paris
| Ralph Brendler
| 9/2/18
|-
| Geoff Klein
| Paul V
| 9/13/18
|-
| Farsheed Hamidi-Toosi
| Paul V
| 9/27/18
|-
| Will Holland
| Ralph Brendler
| 10/4/18
|-
| Gwenn-Ael Lynn
| Ralph Brendler
| 10/4/18
|-
| Will Brown
| Ralph Brendler
| 10/31/18
|-
|Tatjana Paunesku (tpaune)
|Ralph Brendler
|11/29/18
|-
|Jim Lund
|Paul Van Lake
|12/7/18
|-
}
[[Category:Shop Equipment]]
[[Category:Wood Shop]]

Rockwell Delta 20" Bandsaw

2018-12-07T23:27:53Z

Jimlund:

{{Template:EquipmentPage
|owner = Pumping Station:One
|hostarea = Wood Shop
|certification = yes
|hackable = no
|model = 28-350
|serial = 1457257
|arrived = 8/26/15
|where = Wood Shop
|doesitwork = yes
|contact = matt . triano @ gmail . com
|value = $1,000
|image = RockwellDelta20Bandsaw.jpg
}}

==Notes==
manual: [[File:Rockwell-28-350.pdf]]
related manual with more details: [[File:Rockwell20bandsaw.pdf]]
== Authorization ==

*Authorizations for the 14" Rockwell do not carry over to this tool
*This tool requires authorization for use.
*To be authorized, please see an authorized proctor from the list, below.

=== Status ===
10/18/2018 blade broke Eric Replaced it
BUT we needed new aluminum throat plate (someone sawed through it). Joe Dowling made a replacement please.

=== Consumable Parts ===
This saw takes 141" blades.

throat plate. we still need this made.

templates courtesy of Joe Dowling
zip of SKP, STL and f3D files : [[File:Bandsaw Plate.zip]]

image[[Media:picofbandsawplate.jpg]] and

template at Joe's Adobe360 https://a360.co/2RdzuCe

==Tips on Use==

This section is based on a [https://groups.google.com/forum/#!msg/pumping-station-one/rCix6WMMS4Q/S6Ds9sO7DAAJ discussion that took place on the mailing list].

Band-saws have two main uses in the wood shop:

# The primary use is to make curved cuts in a piece of flat wood. In this case the piece is held by hand and guided so the blade follows the curve. A fence is counterproductive for this use.
# The second is resawing lumber that is too thick for the table saw. This is typically, but not exclusively, done with valuable pieces of wood for the purpose of creating a veneer. A fence may be appropriate for this use.

With a bandsaw, you basically never want to have the fence locked parallel to the blade. Every blade will have some degree of drift, and it is necessary to accommodate this drift to achieve a straight cut. There are two common solutions: single-point fences, and adjustable angle fences. PS:1 has both a nice magnetic adjustable fence and a single-point fence that attaches to it.

With a single point fence, you adjust for the drift angle by eye as you cut. This quick and easy method is most appropriate for resawing of narrower boards with a width of 6" or less.

For wider boards, use the adjustable fence with a tall secondary fence attached, carefully adjusted to the drift angle of the blade. For really wide boards, you can also use a presser-board to ensure contact with the fence.

Some additional advice on resawing:

* Buy a nice blade and learn how to install and adjust it. The PS:1 blades are often fairly dull and don't track well.
* Make sure your stock is prepared well, with at least one flat face and one square and flat edge.
* Try to keep only 3-10 teeth in the wood. A 1.5 tpi blade is appropriate for most resawing.
* Use a skip-tooth blade, at least 1" wide (but see note below).

Although wide blades are best for resawing, using 1" blades on the Rockwell is a challenge. The carter blade guides are difficult to adjust, and 1" is the borderline of their capacity. Adjust them so that the back of the blade runs against the support bearing, rather than digging into the frame of the blade guide. This adjustment is particularly difficult on the lower guide. If you do allow the blade to dig into the blade guide, it may be difficult to detect the mistake. The saw will run fine, even though the frame of the lower guide is pushing the blade forward. There won't necessarily be any telltale noises or tracking problems. The only indications of a problem may be that the back of the blade starts to get hot from friction and will discolor as it picks up resins from the wood.

For even wider blades, it is necessary to remove the lower guide completely. Although not an ideal set-up, if the top guide is adjusted properly and the feed rate is reasonable, it cuts well.

{{WoodshopProctors}}

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Keon Turner
|Ron Olson
|
|-
|Hunter Koerner
|Eric Beauchamp
|
|-
|Deanna Williams
|Eric Beauchamp
|
|-
|Burton Kent
|Eric Beauchamp
|
|-
|Casey Olson
|Jason Shanfield
|
|-
|Tom Judge
|Matt Triano
|
|-
|Jeff Smykil
|(Pending confirmation)
|
|-
|Anna Yu
|Matt Triano
|
|-
|Jon Levine
|Jason Shanfield
|
|-
|Kyle Bieneman
|Eric Beauchamp
|
|-
|Niko Hawley
|Eric Beauchamp
|
|-
|Kevin Mitchell
|Eric Beauchamp
|
|-
|Adam Moffatt
|Jason Shanfield
|
|-
|Peter Letscher
|Eric Beauchamp
|11/05/15
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Shine Chen
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/04/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Marcin Ignasiak
|Eric Beauchamp
|
|-
|Thomas Ward
|Andy L.
|11/18/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Chris Kohl
|Eric Beauchamp
|1/8/2016
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Shelly Loke-Gayares
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Sam Paris
|Eric Beauchamp
|1/28/16
|-
|Craig Koszewski
|Eric Beauchamp
|1/28/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Brian Cuocci
|Andy L
|3/17/16
|-
|Julie Zwolinski
|Eric Beauchamp
|3/24/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Colin Campbell
|Andy L
|5/5/16
|-
|Ken Burkhardt
|Andy Larkin
|5/5/16
|-
|Hans Griese
|Andy Larkin
|5/5/16
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Ian Monroe
|Eric Beauchamp
|5/19/16
|-
|An Phan
|Andy Larkin
|7/7/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|Derwin Umali
|Andy Larkin
|8/7/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Joe Dowling
|Ken Burkhardt
|8/15/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|[[user:guijemont|Guillaume Emont]]
|Ken Burkhardt
|9/19/16
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Revant Ohri
|Andy L
|9/15/16
|-
|Aaron Mintz
|Ken Burkhardt
|10/17/16
|-
|Brian Carstensen
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|Robert Richardson
|Ken Burkhardt
|10/17/16
|-
|Ryan Fiebing
|Ken Burkhardt
|10/24/16
|-
|Jack Berg
|Ken Burkhardt
|11/07/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Bruce Mace
|Eric Beauchamp
|02/20/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|Crystal Morales
|Andy Larkin
|2017-03-16
|-
|Jason Pittman
|Andy Larkin
|2017-03-16
|-
|Sam Chen
|Andy Larkin
|
|-
|Abel Greenwald
|Andy Larkin
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Molly Adamski
|Ralph Brendler
|4/27/17
|-
|Shabab Mustafa
|Ralph Brendler
|4/27/17
|-
|Adomas Tautkus
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|David Earl
|Ralph Brendler
|5/4/17
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Luis Colmenares
|Ralph Brendler
|6/1/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Zack Sasnow
|Paul Van Lake
|8/3/2017
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Joanna C.
|Sam O.
|9/27/17
|-
|Mark Haughey
|Sevin Straus
|9/30/17
|-
|Jacqueline Villa
|Maria Miller
|10/3/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|-
|Nick Fera
|Paul V
|11/09/17
|-
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Corey Toyama
|Ralph Brendler
|11/30/2017
|-
|Theo T
|Ralph Brendler
|11/30/2017
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Jeff Hassberger
|Ralph Brendler
|
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Mac MacDevitt
|Paul V
|12/7/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-
|[[User:atomala|Alex Tomala]]
|Ralph Brendler
|12/21/17
|-
|Jamin Nollsch
|Ralph Brendler
|12/28/17
|-
|Chris Versteeg
|Ralph Brandler
|12/28/17
|-
|Aaron Vander Bee
|Ralph Brandler
|1/11/18
|-
|Ben Farmer
|Ralph Brendler
|1/11/18
|-
|Joseph Crouch
|Ralph Brendler
|1/11/18
|-
|Bradford Smith
|Ralph Brendler
|1/11/18
|-
|Stephanie Pelzer
|Ralph Brendler
|1/11/18
|-
|Amanda Assaley
|Ralph Brendler
|1/11/18
|-
|Chris Eppig
|Ralph Brendler
|1/11/18
|-
|Patrick Smith
|Ralph Brendler
|1/11/18
|-
|Jeff Gershune
|Paul VanLake
|1/16/18
|-
|Bryan Pennington
|Ralph Brendler
|1/25/18
|-
|Michael Ice
|Ralph Brendler
|2/08/18
|-
|Francisco becerril
|Ralph Brendler
|2/08/18
|-
|Brandon Kennedy
|Ralph Brendler
|2/22/18
|-
|Charles Barker
|Ralph Brendler
|3/8/18
|-
|Dan Mach
|Ralph Brendler
|3/8/18
|-
|Ricardo Staudt
|Ralph Brendler
|3/8/18
|-
|Paul Graham
|Ralph Brendler
|3/22/18
|-
|Mike Gucciard
|Ralph Brendler
|3/22/18
|-
|[[User:waynr|Wayne Warren]]
|Ralph Brendler
|3/22/18
|-
|Adam Hall
|Paul V
|3/29/18
|-
|Bill Schroeder
|Ralph Brendler
|4/5/18
|-
|Mike Wilkin
|Ralph Brendler
|4/19/18
|-
|Alex Lanigan
|Ralph Brendler
|4/19/18
|-
|Jessica Jokhi
|Ralph Brendler
|4/19/18
|-
|Matt Maggio
|Ralph Brendler
|4/19/18
|-
|Jonathan Frink
|Ralph Brendler
|4/19/18
|-}
|Gary Newhouse
|Ralph Brendler
|4/19/18
|-}
|Dave DesRoberts
|Paul Van Lake
|4/26/18
|-
|Jennifer DesRoberts
|Paul Van Lake
|4/26/18
|-
| Wayne Hendryx
| Ralph Brendler
| 4/19/18
|-
|[[User:brendanf|Brendan Fortune]]
|Ralph Brendler
|5/17/18
|-
| Fritz Sullivan
| Ralph Brendler
| 5/30/18
|-
| Elizabeth Reuter
| Ralph Brendler
| 5/30/18
|-
| Kirsten Landmark Masih
| Ralph Brendler
| 6/07/18
|-
| Chris Niziolek
| Ralph Brendler
| 6/14/18
|-
| Bob Fritz
| Ralph Brendler
| 6/14/18
|-
| Nate Myren
| Ralph Brendler
| 6/14/18
|-
| Eli Schlossberg
| Ralph Brendler
| 6/14/18
|-
| Daniel Willmott
| Paul V
| 6/21/18
|-
| Bruce Levin
| Paul V
| 7/05/18
|-
| Joe Day
| Paul V
| 7/05/18
|-
| Mike Yacobucci
| Ralph Brendler
| 7/12/18
|-
| Kathryn Connolly
| Paul V
| 7/19/18
|-
| Sam Lewis
| Paul V
| 7/19/18
|-
| Aaron Hale
| Ralph Brendler
| 7/26/18
|-
| Adam Wilk
| Ralph Brendler
| 7/26/18
|-
| Geoff Klein
| Paul V
| 9/13/18
|-
| Earl Wood
| Paul V
| 9/13/18
|-
| Jacob Dawson
| Paul V
| 9/13/18
|-
|Nick Prorok
|Ralph Brendler
|3/8/18
|-
| Farsheed Hamidi-Toosi
| Paul V
| 9/27/18
|-
| Tim Bielawa
| Paul V
| 9/27/18
|-
| Will Holland
| Ralph Brendler
| 10/4/18
|-
| Gwenn-Ael Lynn
| Ralph Brendler
| 10/4/18
|-
| Landon Smith
| Ralph Brendler
| 10/18/18
|-
| Will Brown
| Ralph Brendler
| 10/31/18
|-
| Tatjana Paunesku (tpaune)
| Ralph Brendler
| 11/29/18
|-
|Jim Lund
|Paul Van Lake
|12/7/18
|-}
[[Category:Wood Shop]]
[[Category:Shop Equipment]]

SawStop table saw

2018-12-07T23:26:19Z

Jimlund:

{{Template:EquipmentPage
|owner = PS:One
|certification=yes
|hackable = NO
|model = Model PCS31230 3.0HP 220V
|serial = NA
|arrived = 9/1/2012
|doesitwork = yes
|contact = Wood Shop Area Host
|where = Wood Shop
|value = $3,000.00
|image = SawStop.jpg
|hostarea = Wood Shop
}}
[[File:Saw stop badge.jpg|thumb|right|200px]]

= Authorization for this tool by authorized proctors only =
== Authorized Proctors ==
{| class="wikitable" border="1"
|-
|Matt Triano
|-
|Jason Shanfield
|-
|Ron Olson
|-
|Eric Beauchamp
|-
|Andy Larkin
|-
|Ken Burkhardt
|-
|Ralph Brendler
|-
|Paul VanLake
|}

== Status ==

Repaired and in working order as of 11/9/2015

may 14 2018 brake triggered by lasered wood

june 16 2018 tilt broken

Repaired--9/30/2018, someone reported on googlegroups that Chalkpaper on ply wood caused the brake to engage..

7/1/2018 tilt broken

10-5-18 tilt and Elevator not working Parts ordered.

10/24/2018 everything put back together and the lift and tilt mechanisms work mostly like a charm.still waiting for pinion gear to optimize it, but is again functional..

11-17-2018 repaired. 11/16/2018. Brake tripped by user holding a graphite pen in hand while running saw. Pencil made blade contact with blade

== How to Become an Authorized Proctor ==

Contact Wood Shop Area Host Eric Beauchamp.

== SawStop maintenance log table ==
{| class="wikitable" border="1"
! Lubricate
! replace brake/blade
! finetune bevel and elevation
! date completed
! person completing
! other repair detail
|-
! monthly
! as needed
! as needed
!
!
!
!
|-
|x
|x
|x
|oct 24 2018
|Eric Andrew Zack
|lots of work
|
|-
|x
|
|x
|oct 20- ? 2018
|Eric
|replace worm gears
|
|-
|
|
|x
|nov 17 2018
|David and brothermuffin
|replace bladestop and aligned fence
|
|}

= Rules =
# Do not move the machine ever.
# Never use the table as a work surface.
# Always have the dust collection on. Turn it on before you plug in the saw and off after you unplug the saw.
# Always check your material on the blade before you spin up the blade. If the light turns red, DO NOT CUT.
# Always check your wood for nails or staples. If you're not sure, check the entire piece with a magnet.
# If you break something, or damage the saw, contact the area host immediately. Don't let others do more damage or hurt themselves by using a broken tool.
# Always dust the entire machine when you are done. Also check the motor compartment after every use and vacuum out as needed.

= Additional Information =

== Dado Stack ==
Dado stack use requires separate authorization.

SawStop saws support 8″ dado sets only. The optional dado brake cartridge must be used for dado cuts. It has a larger brake pawl designed to stop the multiple blades in a dado set. In addition, you will also need to use a zero-clearance insert specifically for the dado set.

http://www.rockler.com/sawstop-dado-brake-cartridge-for-cns-table-saws

== Sacrificial Fence ==

The Sacrificial Fence requires the dado stack authorization to have been completed.

A sacrificial fence is used in combination with the dado stack to create rebates (grooves) at the edges of boards. Trying to make a rebate at the edge of a board without a sacrificial fence in place will result in damage to the rip fence.

The sacrificial fence is placed on top of the standard table saw rip fence and secured with the screws on the back side. Ensure that the fence is square to the table while tightening the set screws, and that the fence is flush with the front of the rip fence. Then, slide the fence over top of the dado stack, adjusting the fence for the desired rebate width. Adjust the blade height for the desired depth of rebate.

See: https://www.youtube.com/watch?v=JYqvwlbm6B0 beginning at minute 8 for a demonstration of how the sacrificial fence works.

== Blade Brake ==

This saw is equipped with a safety feature that will (hopefully) stop the blade when it contacts something conductive-- like your hand. However, that means you normally can't cut conductive things with this saw or you will trigger the safety brake. This is good if it was your hand in the way, but it also destroys the sawblade and requires installation of a replacement part that costs $70+ every time. And the saw will be down until the replacement can be installed.

According to the owner's manual: "Conductive materials such as aluminum and other metals, carbon fiber materials, '''mirrored acrylic''', carbon-filled materials, etc. will typically '''cause the brake to activate'''." [Emphasis added.]

Other things that may trigger the brake include wet wood, and wood with embedded nails or staples. Lexan and green pressure-treated wood reportedly can also be a problem. That is why the rules instruct you to check your material on the side of the blade before spinning it up, and to check your wood for nails or staples!

== Notes ==
* There's an m8 hole drilled and tapped in the mitre gauge. The post from a magnetic base of our dial indicators thread in. The post may require a spacer so the threads don't stick out (use a stack of washers or a larger-than-m8 nut).
* The right hand table adjusting screw was bent while aligning the table. The table was aligned without it. Aligning the arbor tilt axis will be *really tough* without a replacement. (Part #11 in the cabinet and table exploded diagram in the manual p98)
* The rear rip fence rail has places to put 4 countersunk allen bolts. The left hand bolt screwed into the main table was too long and made contact with an internal table part (probably the rear trunion). It probably pushed the table out of alignment and caused binding while re-aligning the table. That bolt was left out. Don't replace it!

== Training Links ==
* [http://www.sawstop.com/images/uploads/manuals/PCS%20Owners%20Manual%20Model%20PCS31230%20V5.0%2009-13.pdf Owner's Manual]

== Use checklist ==

PS1 is experimenting with the use of checklists to encourage the safe use and proper care of tools in the workspace. The latest version of the [[checklists]] for this tool is stored as a [https://docs.google.com/document/d/1zxrvQX0DXaLxaXkaKCKpZ-PAgnDak6ezKKBkdu_Fw1U/edit?usp=sharing Google Doc] that can be edited by anyone. If you make changes, update the effective date at the bottom of the document. Print a new copy, and replace the old one.

== Maintenance ==
* [http://web.archive.org/web/20130224091815/http://www.woodworkersjournal.com/Main/Articles/Table_Saw_Maintenance_Skill_Builder_Power_Tool_Tun_8197.aspx Table Saw Maintenance]
* [[SawStop Table Saw maintenance|maintenance page]]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Shawn Blaszak
|Danger Committee
|
|-
|[[User:Meistertek|Dan Meyer]]
|Sean Blaszak
|
|-
|Jacob Ginsburg
|Shawn Blaszak
|
|-
|Eric Stein
|Steve Finkelman / Danger Committee
|
|-
|[[User:Dee|Dee Newcum]]
|Shawn Blaszak
|
|-
|Ryan Pierce
|Shawn Blaszak
|
|-
|Tucker Tomlinson
|Shawn Blaszak
|
|-
|Adrianna McKinley
|Danger Committee
|
|-
|Anthony Barker
|Adrianna McKinley
|
|-
|Avner Shanan
|Adrianna McKinley
|
|-
|Colin Parsons
|Adrianna McKinley
|
|-
|Dan Denby
|Adrianna McKinley
|
|-
|Dillon Gray
|Adrianna McKinley
|
|-
|Douglas Savitsky
|Adrianna McKinley
|
|-
|Hailey Willis
|Adrianna McKinley
|
|-
|Jeremy Bloyd-Peshkin
|Adrianna McKinley
|
|-
|Jeremy Kay
|Adrianna McKinley
|
|-
|Jessica Cobb
|Adrianna McKinley
|
|-
|Jordan Bunker
|Adrianna McKinley
|
|-
|Kori Rays
|Adrianna McKinley
|
|-
|Patrick Callahan
|Adrianna McKinley
|
|-
|Ryan Brandys
|Adrianna McKinley
|
|-
|Shawn Blaszak
|Adrianna McKinley
|
|-
|Steve Farkas
|Adrianna McKinley
|
|-
|Steve Finkleman
|Adrianna McKinley
|
|-
|Mike Warot
|Adrianna McKinley
|
|-
|Eric Stein/Toba
|Adrianna McKinley
|
|-
|Ryan Pierce
|Adrianna McKinley
|
|-
|Geoffrey Topham
|Adrianna McKinley
|
|-
|Tim Saylor
|Ryan Pierce
|
|-
|Hailey Willis
|Tim Saylor
|
|-
|James Longfield
|Tim Saylor
|
|-
|Liam Tuohy
|Tim Saylor
|
|-
|Jim Tuohy
|Tim Saylor
|
|-
|Sean Nixon
|Tim Saylor
|
|-
|Michael Reddy
|Tim Saylor
|
|-
|Matt Triano
|Tim Saylor
|
|-
|Derek Bever
|Tim Saylor
|
|-
|Dan Willmott
|Tim Saylor
|
|-
|Tyler DeAngelo
|Tim Saylor
|
|-
| Michael Skilton
| Adrianna McKinley
|
|-
| Dean Anderson
| Tim Saylor
|
|-
|Kathy Whisler
|Tucker Tomlinson
|
|-
| João Santos
| Geoffrey Topham
|
|-
|David Fell
|Tucker Tomlinson
|
|-
|[[User:Bikemandan|Dan Locks]]
|Adrianna McKinley
|
|-
|Dave Earley
|[[User:Bikemandan|Dan Locks]]
|
|-
| Boban Nikolic
| Michael Skilton
|
|-
| Madeleine Klichowski
| Tim Saylor
|
|-
| Lyn Cole
| Tim Saylor
|
|-
| Nathan Becka
| Tim Saylor
|
|-
| Brian Carstensen
| Tim Saylor
|
|-
| Eric Veggeberg
| Tim Saylor
|
|-
| George Shaw
| Tim Saylor
|
|-
|Janet Dornhoff
|Matt Triano
|
|-
|Hilary Lee
|Matt Triano
|
|-
|Will Rante
|Matt Triano
|
|-
|Henry Behel
|Matt Triano
|
|-
|Alan Livshin
|Matt Triano
|
|-
|Michelle Garcia
|Matt Triano
|
|-
|Daylan Dufelmeier
|Matt Triano
|
|-
|Michael Maloney
|Matt Triano
|
|-
|Ian Cochran
|Matt Triano
|
|-
|Abhimanyu Belani
|Will Rante
|
|-
|Justin Miles
|Adrianna McKinley
|
|-
|Dmitry Baycharov
|Matt Triano
|
|-
|Stephen Ulman
|Matt Triano
|
|-
|Jarred Meyers
|Matt Triano
|
|-
|Andrew Kos
|Matt Triano
|
|-
|Bryan Gleason
|Matt Triano
|
|-
|Jason Sharfield
|Matt Triano
|
|-
|Dave Schact
|Matt Triano
|
|-
|Daniel Wells
|Matt Triano
|
|-
|Sean Corbett
|Matt Triano
|
|-
|Aaron Feigen
|Matt Triano
|
|-
|Bo Driscoll
|Matt Triano
|
|-
|Joel Shepherd
|Matt Triano
|
|-
|Santina Croniser
|Matt Triano
|
|-
|Todd Allen
|Matt Triano
|
|-
|Lawrence MacDevitt
|Matt Triano
|
|-
|Ryan Kelly
|Matt Triano
|
|-
|Melody Stanley
|Matt Triano
|
|-
|Tom Ackenhausen
|Matt Triano
|
|-
|JJ Sciappa
|Jason Shanfield
|
|-
|Jason Araujo
|Derek Bever
|
|-
|John Godwim
|Matt Triano
|
|-
|Jeff Molek
|Matt Triano
|
|-
|Nathan Ellis
|Jason Shanfield
|
|-
|Sloan Lavery
|Matt Triano
|
|-
|Trey Keifer
|Matt Triano
|
|-
|Juan Robles
|Matt Triano
|
|-
|Simon Cygielski
|Matt Triano
|
|-
|Tom Forajter
|Matt Triano
|
|-
|Robert Grossman
|Matt Triano
|
|-
|Lucas Morris
|Matt Triano
|
|-
|Sergio Preston
|Matt Triano
|
|-
|Ron Bean
|Matt Triano
|
|-
|Greg Eagel
|Matt Triano
|
|-
|Carter Constana
|Matt Triano
|
|-
|Adam Glick
|Matt Triano
|
|-
|Zachary Fietsch
|Matt Triano
|
|-
|Solomon Hursey
|Matt Triano
|
|-
|Jesse Reynolds
|Matt Triano
|
|-
|Eduard Shlahtichman
|Matt Triano
|
|-
|Skittles Rainbow
|Matt Triano
|
|-
|Tom Jurgensen
|Matt Triano
|
|-
|Barmey Ung
|Matt Triano
|
|-
|Casey Olson
|Matt Triano
|
|-
|Jonathan Bisson
|Matt Triano
|
|-
|Ed Bennett
|Matt Triano
|
|-
|Anna Yu
|Matt Triano
|
|-
|Bandit Gangwere
|Matt Triano
|
|-
|Joseph Nudell
|Matt Triano
|
|-
|David Butler
|Matt Triano
|
|-
|Kathryn Smiley
|Matt Triano
|
|-
|Aimee Spevak
|Matt Triano
|
|-
|Cassie Webster
|Matt Triano
|
|-
|Chris Moylan
|Matt Triano
|
|-
|Mike O'Connor
|Matt Triano
|
|-
|Tyler Hsu
|Matt Triano
|
|-
|Zihe "Johnson" Luo
|Matt Triano
|
|-
|Giovanni Arroyo
|Matt Triano
|
|-
|Ian McLeod
|Derek Bever
|
|-
|Dan Thomson
|Jason Shanfield
|
|-
|Brandon Price
|Matt Triano
|
|-
|Arturo Duarte
|Matt Triano
|
|-
|Eric Braun
|Matt Triano
|
|-
|Jeremy Fay
|Matt Triano
|
|-
|Leeswann Bolden
|Matt Triano
|
|-
|James Porter
|Matt Triano
|
|-
|Jeff McBride
|Matt Triano
|
|-
|Connor Miller
|Matt Triano
|
|-
|Ashley Duca
|Matt Triano
|
|-
|Karen Niemczyk
|Matt Triano
|
|-
|Bassam Alshammari
|Matt Triano
|
|-
|John Fiene
|Matt Triano
|
|-
|Thomas Wright
|Matt Triano
|
|-
|Tom Judge
|Jason Shanfield
|
|-
|Joseph Peltier
|Matt Triano
|
|-
|Justin Conroy
|Matt Triano
|
|-
|David Koppel
|Matt Triano
|
|-
|Sevin Straus
|Matt Triano
|
|-
|Roger Moore
|Matt Triano
|
|-
|Valerie Moore
|Matt Triano
|
|-
|Andy Schwartz
|Matt Triano
|
|-
|Assaf Evron
|Matt Triano
|
|-
|David Pelot
|Matt Triano
|
|-
|Rich Smith
|Matt Triano
|
|-
|Khoi Nguyen
|Matt Triano
|
|-
|Brian Keehner
|Matt Triano
|
|-
|Jesse Gare
|Matt Triano
|
|-
|Tyler Natoli
|Matt Triano
|
|-
|David Siegfried
|Matt Triano
|
|-
|Annie Zebula
|Matt Triano
|
|-
|<strike>Eliya Gwetta</strike>
|Matt Triano
|
|-
|Patrick Schliss
|Matt Triano
|
|-
|Arjun Wadnerkar
|Matt Triano
|
|-
|Alec Weege
|Matt Triano
|
|-
|Sonia Yaco
|Matt Triano
|
|-
|Tom Bossier
|Jason Shanfield
|
|-
|Ray Doeksen
|Jason Shanfield
|
|-
|Touly Phiachantharath
|Matt Triano
|
|-
|Matt Vibberts
|Matt Triano
|
|-
|Thomas Garza
|Matt Triano
|
|-
|Will Garza
|Matt Triano
|
|-
|Brennan Koziarz
|Matt Triano
|
|-
|Eric Beauchamp
|Matt Triano
|
|-
|Clarence Risher
|Matt Triano
|
|-
|Erica Tesla
|Matt Triano
|
|-
|Jabu Dawdu
|Matt Triano
|
|-
|Karen Murphey
|Matt Triano
|
|-
|Matt Meshulam
|Matt Triano
|
|-
|Josh Myers
|Matt Triano
|
|-
|Weston Tanner
|Matt Triano
|
|-
|Hugh Sato
|Matt Triano
|
|-
|Nora Sluzas
|Matt Triano
|
|-
|Elizabeth Koprucki
|Matt Triano
|
|-
|Oscar Villareal
|Matt Triano
|
|-
|Rob Paral
|Matt Triano
|
|-
|Alex Schaffer
|Matt Triano
|
|-
|Szymon Sambor
|Matt Triano
|
|-
|Michael Solhelm
|Matt Triano
|
|-
| Rob Paral
| Michael Skilton
|
|-
| Sonia Yaco
| Matt Triano
|
|-
| Alyssa Moxley
| Ron Olson
|
|-
| Kyle Bieneman
| Ron Olson
|
|-
|Steve Ioannou
|Matt Triano
|
|-
|[[User:Mwilkens|Matt Wilkens]]
|Matt Triano
|
|-
|Eric Slehofer
|Matt Triano
|
|-
|Jon Levine
|Matt Triano
|
|-
|Melody Snyder
|Matt Triano
|
|-
|Curtis Cooke
|Matt Triano
|
|-
|Harry Morgan
|Matt Triano
|
|-
|Lucas Goossen
|Matt Triano
|
|-
|Sam Drazin
|Matt Triano
|
|-
|Mike Kislovsky
|Matt Triano
|
|-
|Keven Kalay
|Matt Triano
|
|-
|Jacob Rush
|Ron Olson
|
|-
|Sam Reicks
|Ron Olson
|
|-
|Kevin Pulver
|Ron Olson
|
|-
|Keith Hultman
|Ron Olson
|
|-
|Cary Lahucik
|Ron Olson
|
|-
|John Keippel
|Ron Olson
|
|-
|Mario Rodriguez
|Ron Olson
|
|-
|Szilvia Precsinszki
|Ron Olson
|
|-
|Davis Mazariegos
|Ron Olson
|
|-
|Pete Noverini
|Matt Triano
|
|-
|Mike Coriale
|Matt Triano
|
|-
|Dan Baltudis
|Ron Olson
|
|-
|Viktor Bazarov
|Ron Olson
|
|-
|Roman Solomatov
|Ron Olson
|
|-
|Patrick Grider
|Ron Olson
|
|-
|Dubi Kaufmann
|Ron Olson
|
|-
|Erin Kunkel
|Matt Triano
|
|-
|Tyler Matthew
|Matt Triano
|
|-
|Shae Kurko
|Matt Triano
|
|-
|Ben Bogler
|Matt Triano
|
|-
|Rod McLah
|Ron Olson
|
|-
|Andrew Dreasler
|Ron Olson
|
|-
|Sam Paris
|Matt Triano
|
|-
|Chris Kleehammer
|[[User:jason|Jason Shanfield]]
|
|-
|Trey Elliott
|[[User:jason|Jason Shanfield]]
|
|-
|Nik Brink
|[[User:jason|Jason Shanfield]]
|
|-
|Frances Ritchie
|Ron Olson
|
|-
|Ben Kern
|Ron Olson
|
|-
|Knute Martell
|Ron Olson
|
|-
|Eric Yu
|Ron Olson
|
|-
|Knute Martell
|Ron Olson
|
|-
|Bob McGrath
|Ron Olson
|
|-
|Karol Slowikowski
|Ron Olson
|
|-
|Michelle Deleon
|Ron Olson
|
|-
|Chris Smith
|Ron Olson
|
|-
|Benjamin Miller
|Ron Olson
|
|-
|Jennie P
|Ron Olson
|
|-
|Joe Wallace
|Ron Olson
|
|-
|Eugene Liokumovich
|Ron Olson
|
|-
|Laurel Garrett
|Matt Triano
|
|-
|Rei Kevin
|Matt Triano
|
|-
|Aji Slater
|Matt Triano
|
|-
|John Beyer
|Matt Triano
|
|-
|Jay Kasturi
|Ron Olson
|
|-
|Ryan Neuman
|Ron Olson
|
|-
|[[User:papaben44|Benjamin Dambman]]
|Matt Triano
|4/14/2015
|-
|Tomas Ward
|Ron Olson
|4/26/2015
|-
|Les Schier
|Jason Shanfield
|5/2/15
|-
|Mike Jones
|Matt Triano
|5/12/15
|-
|Hunter Koerner
|Eric Beauchamp
|6/4/15
|-
|Kurt Ziegel
|Eric Beauchamp
|6/4/15
|-
|Simon Pyle
|Eric Beauchamp
|6/4/15
|-
|Andy Richardson
|Matt Triano
|4/14/15
|-
|Connor Jansen
|Eric Beauchamp
|6/4/15
|-
|Raj Perera
|Matt Triano
|
|-
|Matt Crump
|Jason Shanfield
|7/1/15
|-
|Erik Wessing
|Eric Beauchamp
|
|-
|Ananda Stevens
|Eric Beauchamp
|7/18/15
|-
|Mark Stevens
|Eric Beauchamp
|7/18/15
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|Jim Baker
|Eric Beauchamp
|8/27/2015
|-
|Ralph Brendler
|Eric Beauchamp
|8/27/2015
|-
|Bruce McConachie
|Eric Beauchamp
|8/27/2015
|-
|Shane Kanter
|Ron Olson
|9/10/2015
|-
|Burton Kent
|Ron Olson
|9/10/2015
|-
|Marcin Ignasiak
|Eric Beauchamp
|
|-
|Deanna Williams
|Eric Beauchamp
|
|-
|Jeff Smykil
|Matt Triano
|9/26/2015
|-
|Glenn Powers
|Matt Triano
|3/2015
|-
|Niko Hawley
|Eric Beauchamp
|
|-
|Kevin Mitchell
|Eric Beauchamp
|
|-
|John McDonald
|Eric Beauchamp
|10/05/2015
|-
|[[User:themoffatt|Adam Moffatt]]
|Eric Beauchamp
|10/22/2015
|-
|Jean Michel Crettaz
|Eric Beauchamp
|10/22/2015
|-
|Mike Mandrea
|Eric Beauchamp
|11/05/2015
|-
|Caleb Young
|Eric Beauchamp
|
|-
|Peter Letscher
|Eric Beauchamp
|11/05/15
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Shine Chen
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/04/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Chris Kohl
|Eric Beauchamp
|1/8/2016
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Craig Koszewski
|Eric Beauchamp
|1/28/16
|-
|Amner Castillo
|Eric Beauchamp
|2/26/16
|-
|Christopher Carson
|Eric Beauchamp
|2/26/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Jared K.
|Eric Beauchamp
|3/10/16
|-
|Mark Zumwalt
|Andy Larkin
|3/17/16
|-
|Adriana Garcia
|Eric Beauchamp
|3/24/16
|-
|Julie Zwolinski
|Eric Beauchamp
|3/24/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Greg "Nerobro" Teiber
|Dan Locks
|4/29/16
|-
|Ken Burkhardt
|Andy Larkin
|5/5/16
|-
|Colin Campbell
|Andy Larkin
|5/5/16
|-
|Hans Griese
|Andy Larkin
|5/5/16
|-
|Spencer Simms
|Eric Beauchamp
|05/19/2016
|-
|Adam Stein
|Andy Larkin
|4/14/2016
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Ian Monroe
|Eric Beauchamp
|5/19/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
|Jim Brink
|Andy Larkin
|07/21/16
|-
|Donald Wells
|/Andy Larkin
|8/4/16
|-
|Derwin Umali
|Andy Larkin
|08/04/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Joe Dowling
|Ken Burkhardt
|08/15/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|Brian Cuocci
|Andy L
|9/15/16
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Revant Ohri
|Andy L
|9/15/16
|-
|Aaron Mintz
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|-
|Robert Richardson
|Ken Burkhardt
|10/17/16
|-
|Ryan Fiebing
|Ken Burkhardt
|10/24/16
|-
|Jack Berg
|Ken Burkhardt
|11/07/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Matt Schaid
|Andy Larkin
|01/05/17
|-
|Jamie Vollmer
|Andy Larkin
|01/05/17
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Bruce Mace
|Eric Beauchamp
|02/20/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|Crystal Morales
|Andy Larkin
|2017-03-16
|-
|Jason Pittman
|Andy Larkin
|2017-03-16
|-
|Sam Chen
|Andy Larkin
|
|-
|Abel Greenwald
|Andy Larkin
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Molly Adamski
|Ralph Brendler
|4/27/2017
|-
|Shabab Mustafa
|Ralph Brendler
|4/27/17
|-
|Adomas Tautkus
|Ralph Brendler
|4/27/17
|-
|Brett Sanderson
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|David Earl
|Ralph Brendler
|5/4/2017
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Luis Colmenares
|Ralph Brendler
|6/1/17
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Andrew Wingate
|Jason Shanfield
|7/22/17
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Dan Kim
|Ralph Brendler
|9/21/17
|-
|Mark Haughey
|Sevin Straus
|9/30/17
|-
|Jacqueline Villa
|Maria Miller
|10/3/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/9/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Corey Toyama
|Ralph Brendler
|11/30/2017
|-
|Theo T
|Ralph Brendler
|11/30/2017
|-
|Jeff Hassberger
|Ralph Brendler
|11/2/17
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Mac MacDevitt
|Paul V
|12/7/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-
|[[User:atomala|Alex Tomala]]
|Ralph Brendler
|12/21/17
|-
|Jamin Nollsch
|Ralph Brendler
|12/28/17
|-
|Chris Versteeg
|Ralph Brandler
|12/28/17
|-
|Aaron Vander Bee
|Ralph Brandler
|1/11/18
|-
|Ben Farmer
|Ralph Brendler
|1/11/18
|-
|Joseph Crouch
|Ralph Brendler
|1/11/18
|-
|Bradford Smith
|Ralph Brendler
|1/11/18
|-
|Stephanie Pelzer
|Ralph Brendler
|1/11/18
|-
|Amanda Assaley
|Ralph Brendler
|1/11/18
|-
|Chris Eppig
|Ralph Brendler
|1/11/18
|-
|Patrick Smith
|Ralph Brendler
|1/11/18
|-
|Jeff Gershune
|Paul VanLake
|1/16/18
|-
|Bryan Pennington
|Ralph Brendler
|1/25/18
|-
|Michael Ice
|Ralph Brendler
|2/08/18
|-
|Francisco Becerril
|Ralph Brendler
|2/08/18
|-
|Brandon Kennedy
|Ralph Brendler
|2/22/18
|-
|Rolf Scheidt
|Ralph Brendler
|2/22/18
|-
|Charles Barker
|Ralph Brendler
|3/8/18
|-
|Dan Mach
|Ralph Brendler
|3/8/18
|-
|Bruce Mace
|Ralph Brendler
|3/8/18
|-
|Nick Prorok
|Ralph Brendler
|3/8/18
|-
|Ricardo Staudt
|Ralph Brendler
|3/8/18
|-
|Paul Graham
|Ralph Brendler
|3/22/18
|-
|Mike Gucciard
|Ralph Brendler
|3/22/18
|-
|[[User:waynr|Wayne Warren]]
|Ralph Brendler
|3/22/18
|-
|Adam Hall
|Paul V
|3/29/18
|-
|Bill Schroeder
|Ralph Brendler
|4/5/18
|-
|Mike Wilkin
|Ralph Brendler
|4/19/18
|-
|Alex Lanigan
|Ralph Brendler
|4/19/18
|-
|Jessica Jokhi
|Ralph Brendler
|4/19/18
|-
|Matt Maggio
|Ralph Brendler
|4/19/18
|-
|Jonathan Frink
|Ralph Brendler
|4/19/18
|-
|Ian Brieger
|Ralph Brendler
|4/19/18
|-}
|Gary Newhouse
|Ralph Brendler
|4/26/18
|-}
|Dave DesRoberts
|Paul Van Lake
|4/26/18
|-
|Jennifer DesRoberts
|Paul Van Lake
|4/26/18
|-
|John Burkholder
|Ralph Brendler
|5/03/18
|-
| Wayne Hendryx
| Ralph Brendler
| 4/19/18
|-
|[[User:brendanf|Brendan Fortune]]
|Ralph Brendler
|5/17/18
|-
| Fritz Sullivan
| Ralph Brendler
| 5/30/18
|-
| Elizabeth Reuter
| Ralph Brendler
| 5/30/18
|-
| Kirsten Landmark Masih
| Ralph Brendler
| 6/07/18
|-
| Chris Niziolek
| Ralph Brendler
| 6/14/18
|-
| Bob Fritz
| Ralph Brendler
| 6/14/18
|-
| Sam Wallinga
| Ralph Brendler
| 6/14/18
|-
| Nate Myren
| Ralph Brendler
| 6/14/18
|-
| Eli Schlossberg
| Ralph Brendler
| 6/14/18
|-
| Tyler Works
| Ralph Brendler
| 6/14/18
|-
| Bruce Levin
| Paul V
| 7/05/18
|-
| Joe Day
| Paul V
| 7/05/18
|-
| Mike Yacobucci
| Ralph Brendler
| 7/12/18
|-
| Kathryn Connolly
| Paul V
| 7/19/18
|-
| Kathryn Connolly
| Paul V
| 7/19/18
|-
| Aaron Hale
| Ralph Brendler
| 7/26/18
|-
| Adam Wilk
| Ralph Brendler
| 7/26/18
|-
| Geoff Klein
| Paul V
| 9/13/18
|-
| Earl Wood
| Paul V
| 9/13/18
|-
| Jacob Dawson
| Paul V
| 9/13/18
|-
| Farsheed Hamidi-Toosi
| Paul V
| 9/27/18
|-
| Gwenn-Ael Lynn
| Ralph Brendler
| 10/4/18
|-
|Tatjana Paunesku (tpaune)
|Ralph Brendler
|11/29/18
|-
|Jim Lund
|Paul Van Lake
|12/7/18
|-}
[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Wood Shop]]
[[Category:Certification Clarification Needed]]
[[Category:EquipmentMaintenance]]

Belt Sander

2018-12-07T23:25:17Z

Jimlund:

This is a combination belt and disk sander with a 6" X48" belt and a 9" disk, though the disk is not currently in use and its table is not installed.

Users should be careful not to get their fingers caught on the spinning platen to the users right.

{{Template:EquipmentPage
|owner = Steve
|certification = yes
|hackable = NO
|model = Powertec BD6900
|serial = SERIAL NUMBER
|arrived = 12/01/11
|doesitwork = yes
|contact = Wood Shop Area Host
|where = [[Woodshop|Workshop]]
|value = DOLLARS
|image = beltsander.jpg
}}

== List of Currently Authorized Users ==
{| class="wikitable" border="1"}
! Authorized Member
! Trained By
! Date
|-
|Gabriel Rosenhouse
|Adrianna McKinley
|
|-
|Mike Warot
|Adrianna McKinley
|
|-
|Ryan Pierce
|Internship
|
|-
|Jason Shanfield
|Matt Triano
|
|-
|Nathan Ellis
|Jason Shanfield
|
|-
|[[User:Dee|Dee]]
|[[User:Toba|Eric Stein]]
|
|-
|[[User:Justin|Justin T. Conroy]]
|Ed Bennett
|
|-
|Sloan Lavery
|Ed Bennett
|
|-
|David Fell
|Ron Olson
|
|-
|Patrick Grider
|Ron Olson
|
|-
|Chris Kleehammer
|[[User:jason|Jason Shanfield]]
|
|-
|Trey Elliott
|[[User:jason|Jason Shanfield]]
|
|-
|Nik Brink
|[[User:jason|Jason Shanfield]]
|
|-
|Frances Ritchie
|Ron Olson
|
|-
|Eric Yu
|Ron Olson
|
|-
|Benjamin Miller
|Ron Olson
|
|-
|David Srebro
|Ron Olson
|
|-
|James Villalpando
|Ron Olson
|
|-
|Jeff Lawson
|Ron Olson
|
|-
|Tomas Ward
|Ron Olson
|4/26/2015
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|-Caleb Young
|-Eric Beauchamp
|-
|Aaron Carlock
|Ron Olson
|11/18/15
|-
|Greg Kudlacz
|Ron Olson
|
|-
|Daniel Maziarz
|Ron Olson
|
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Sam Paris
|Eric Beauchamp
|1/14/16
|-
|Jared K
|Eric Beauchamp
|3/10/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
|Abel Greenwald
|Andy Larkin
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|08.30.17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/2/17
|-
|[[User:atomala|Alex Tomala]]
|Ralph Brendler
|12/21/17
|-
|Ben Farmer
|Ralph Brendler
|1/11/18
|-
|Bradford Smith
|Ralph Brendler
|1/11/18
|-}
|John Burkholder
|Ralph Brendler
|5/03/18
|-
| Aaron Hale
| Ralph Brendler
| 7/26/18
|-
|Jim Lund
|Paul Van Lake
|12/7/18
|-}

==maintenance==
[[Belt_Sander_maintenance|Belt sander maintenance]]
[[Category:Equipment]]
[[Category:Shop Equipment]]
[[Category:Loaned Equipment]]

Belt Sander

2018-12-07T23:24:42Z

Jimlund:

This is a combination belt and disk sander with a 6" X48" belt and a 9" disk, though the disk is not currently in use and its table is not installed.

Users should be careful not to get their fingers caught on the spinning platen to the users right.

{{Template:EquipmentPage
|owner = Steve
|certification = yes
|hackable = NO
|model = Powertec BD6900
|serial = SERIAL NUMBER
|arrived = 12/01/11
|doesitwork = yes
|contact = Wood Shop Area Host
|where = [[Woodshop|Workshop]]
|value = DOLLARS
|image = beltsander.jpg
}}

== List of Currently Authorized Users ==
{| class="wikitable" border="1"}
! Authorized Member
! Trained By
! Date
|-
|Gabriel Rosenhouse
|Adrianna McKinley
|
|-
|Mike Warot
|Adrianna McKinley
|
|-
|Ryan Pierce
|Internship
|
|-
|Jason Shanfield
|Matt Triano
|
|-
|Nathan Ellis
|Jason Shanfield
|
|-
|[[User:Dee|Dee]]
|[[User:Toba|Eric Stein]]
|
|-
|[[User:Justin|Justin T. Conroy]]
|Ed Bennett
|
|-
|Sloan Lavery
|Ed Bennett
|
|-
|David Fell
|Ron Olson
|
|-
|Patrick Grider
|Ron Olson
|
|-
|Chris Kleehammer
|[[User:jason|Jason Shanfield]]
|
|-
|Trey Elliott
|[[User:jason|Jason Shanfield]]
|
|-
|Nik Brink
|[[User:jason|Jason Shanfield]]
|
|-
|Frances Ritchie
|Ron Olson
|
|-
|Eric Yu
|Ron Olson
|
|-
|Benjamin Miller
|Ron Olson
|
|-
|David Srebro
|Ron Olson
|
|-
|James Villalpando
|Ron Olson
|
|-
|Jeff Lawson
|Ron Olson
|
|-
|Tomas Ward
|Ron Olson
|4/26/2015
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|-Caleb Young
|-Eric Beauchamp
|-
|Aaron Carlock
|Ron Olson
|11/18/15
|-
|Greg Kudlacz
|Ron Olson
|
|-
|Daniel Maziarz
|Ron Olson
|
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Sam Paris
|Eric Beauchamp
|1/14/16
|-
|Jared K
|Eric Beauchamp
|3/10/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
|Abel Greenwald
|Andy Larkin
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|08.30.17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/2/17
|-
|[[User:atomala|Alex Tomala]]
|Ralph Brendler
|12/21/17
|-
|Ben Farmer
|Ralph Brendler
|1/11/18
|-
|Bradford Smith
|Ralph Brendler
|1/11/18
|-}
|John Burkholder
|Ralph Brendler
|5/03/18
|-
| Aaron Hale
| Ralph Brendler
| 7/26/18
|-
|Jim Lund
|Paul Van Lake
|12/7/18
-}

==maintenance==
[[Belt_Sander_maintenance|Belt sander maintenance]]
[[Category:Equipment]]
[[Category:Shop Equipment]]
[[Category:Loaned Equipment]]

Sears Scroll Saw

2018-12-07T23:24:22Z

Jimlund:

{{Template:EquipmentPage
|owner = PS:One
|model = Sears/Craftsman 137.216160
|serial = RFW11
|arrived = April 2009
|doesitwork = yes
|contact = Dan Meyer
|where = Wood Shop
|certification = yes
|hackable = no
|value = $100
|hostarea = Wood Shop
|image = Sears_scroll_saw_small.jpg
}}

{{WoodshopProctors}}

== Documentation ==
* [http://www.managemylife.com/mmh/lis_pdf/OWNM/L0808290.pdf Owner's manual]

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member Keon Turner
! Trained By Ron Olson
|-
|Adam Flynn
|Danger Committee
|-
|Julie Moffitt
|Danger Committee
|-
|Sacha De'Angeli
|Danger Committee
|-
|Eric Michaud
|Danger Committee
|-
|Dan Davis Bodeiaver?
|Danger Committee
|-
|Tim Saylor
|Danger Committee
|-
|Zane Bowers
|Danger Committee
|-
|Teddie Goldenberg
|Seth D. Slis?
|-
|Nicolle Nevlist
|Seth D. Slis?
|-
|Jeff Kantarek
|Eric Michaud
|-
|Chris Luiz
|Eric Michaud
|-
|Avner Shanan
|Chris Luiz
|-
|David Mole
|Tim Saylor
|-
|Sarah Sutherlin
|Jeff Kantarek
|-
|Jeannette Thraen
|Sarah Sutherlin
|-
|Jasna Delic
|Sarah Sutherlin
|-
|Nathan Witt
|?
|-
|Tom Ketola
|Nathan Witt
|-
|Geoffrey Topham
|Nathan Witt
|-
|John Stoner
|Nathan Witt
|-
|Ryan Lanham
|Nathan Witt
|-
|Brian Cordanvier
|Nathan Witt
|-
|Jim Burke
|Nathan Witt
|-
|Anne Petersen
|Nathan Witt
|-
|Cory Knapp
|Nathan Witt
|-
|Joshua Rothhaas
|Shawn Blaszak
|-
|Jay Hopkins
|Shawn Blaszak
|-
|Jordan Bunker
|Nathan Witt
|-
|Constomtin Gowileson?
|Nathan Witt
|-
|Alek Shnayder
|Nathan Witt
|-
|John Dorfman
|Nathan Witt
|-
|Jakub Klimuszko
|Sacha De'Angeli
|-
|Adrianna McKinley
|?
|-
|Nathan Witt
|Adrianna McKinley
|-
|Bryer Le?
|Eric Michaud
|-
|Matt Bran
|Shawn Blaszak
|-
|Nick Ferrari
|Tim Saylor
|-
|Chris Fanning
|Shawn Blaszak
|-
|Mike Warot
|Adrianna McKinley
|-
|Gabriel Rosenhouse
|Adrianna McKinley
|-
|Malerie Kaplan
|Tim Saylor
|-
|Tucker Tomlinson
|Shawn Blaszak
|-
|Joseph Prosninitz
|Adrianna McKinley
|-
|Steve Farkas
|Adrianna McKinley
|-
|Ryan Pierce
|Adrianna McKinley
|-
|Michael Reddy
|Tim Saylor
|-
|Matt Triano
|Tim Saylor
|-
|Derek Bever
|Tim Saylor
|-
|Dan Willmott
|Tim Saylor
|-
|Tyler DeAngelo
|Tim Saylor
|-
|Michael Skilton
|Tim Saylor
|-
|Kathy Whisler
|Adrianna McKinley
|-
|Janet Dornhoff
|Matt Triano
|-
|Hilary Lee
|Matt Triano
|-
|Will Rante
|Matt Triano
|-
|Henry Behel
|Matt Triano
|-
|Alan Livshin
|Matt Triano
|-
|Michelle Garcia
|Matt Triano
|-
|Daylan Dufelmeier
|Matt Triano
|-
|Michael Maloney
|Matt Triano
|-
|Ian Cochran
|Matt Triano
|-
|Bryan Gleason
|Matt Triano
|-
|Sloan Lavery
|Matt Triano
|-
|Trey Keifer
|Matt Triano
|-
|Juan Robles
|Matt Triano
|-
|Simon Cygielski
|Matt Triano
|-
|Tom Forajter
|Matt Triano
|-
|Robert Grossman
|Matt Triano
|-
|Lucas Morris
|Matt Triano
|-
|Sergio Preston
|Matt Triano
|-
|Casey Olson
|Matt Triano
|-
|David Fell
|Ron Olson
|-
|Dubi Kaufmann
|Ron Olson
|-
|Patrick Grider
|Ron Olson
|-
|John Farmer
|Ron Olson
|-
|Sam Paris
|Ron Olson
|-
|Frances Ritchie
|Ron Olson
|-
|Ben Kern
|Ron Olson
|-
|Eric Yu
|Ron Olson
|-
|Karol Slowikowski
|Ron Olson
|-
|Chris Smith
|Ron Olson
|-
|Benjamin Miller
|Ron Olson
|-
|Laurel Garrett
|Matt Triano
|-
|Rei Kevin
|Matt Triano
|-
|Aji Slater
|Matt Triano
|-
|John Beyer
|Matt Triano
|-
|Brad Topol
|Matt Triano
|-
|-
|Shae Kurko
|Matt Triano
|-
|Hunter Koerner
|Eric Beauchamp
|-
|Kurt Ziegel
|Eric Beauchamp
|-
|Simon Pyle
|Eric Beauchamp
|-
|Connor Jansen
|Eric Beauchamp
|-
|Ananda Stevens
|Eric Beauchamp
|-
|Erik Wessing
|Eric Beauchamp
|-
|Mark Stevens
|Eric Beauchamp
|-
|Sam Paris
|Eric Beauchamp
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|Kyle Bieneman
|Eric Beauchamp
|8/27/2015
|-
|Jim Baker
|Eric Beauchamp
|8/27/2015
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|-
|Niko Hawley
|Eric Beauchamp
|-
|Kevin Mitchell
|Eric Beauchamp
|-
|-Caleb Young
|-Eric Beauchamp
|-
|[[User:themoffatt|Adam Moffatt]]
|Eric Beauchamp
|10/22/2015
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Ashley Borg
|Andy Larkin
|4/3/17
|-
|Sam Chen
|Andy Larkin
|-
|Abel Greenwald
|Andy Larkin
|-
|Luis Colmenares
|Ralph
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Corey Toyama
|Ralph Brendler
|11/30/2017
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-
|Aaron Vander Bee
|Ralph Brandler
|1/11/18
|-
|Ben Farmer
|Ralph Brendler
|1/11/18
|-
|Bradford Smith
|Ralph Brendler
|1/11/18
|-
|Bryan Pennington
|Ralph Brendler
|1/25/18
|-
|Dan Mach
|Ralph Brendler
|3/8/18
|-
|Bruce Mace
|Ralph Brendler
|3/8/18
|-
|Ricardo Staudt
|Ralph Brendler
|3/8/18
|-
|Bill Schroeder
|Ralph Brendler
|4/5/18
|-
| Aaron Hale
| Ralph Brendler
| 7/26/18
|-
|Jim Lund
|Paul Van Lake
|12/7/18
|-}

[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Wood Shop]]

Dayton 6x9 Belt Sander

2018-12-07T22:50:52Z

Jimlund:

{{Template:EquipmentPage
|owner=PS:One
|model=
|serial=
|arrived=
|doesitwork=yes
|contact=[[user: ericbeau|Eric Beauchamp]]
|where=Wood Shop
|certification=yes
|hackable=no
|value=$500
|image=DaytonSander.jpg
|hostarea=Wood Shop
}}

== Notes ==

== Safety ==

==maintenance==
[[Dayton_6x9_Belt_Sander_maintenance| maintenance page]]

[[Category:Shop Equipment]]
[[Category:Wood Shop]]

= List of Currently Certified Users =
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Eric Beauchamp
|Danger committee
|
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Justin Pestka
|Ralph Brendler
|8/30/17
|-
|Danielle MacDonald||Ralph Brendler||2017-06-29
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/2/17
|-
|Jeff Hassberger
|Ralph Brendler
|11/2/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|[[User:atomala|Alex Tomala]]
|Ralph Brendler
|12/21/17
|-
|Chris Versteeg
|Ralph Brandler
|12/28/17
|-
|Aaron Vander Bee
|Ralph Brendler
|1/11/18
|-
|Ben Farmer
|Ralph Brendler
|1/11/18
|-
|Bradford Smith
|Ralph Brendler
|1/11/18
|-
|Amanda Assaley
|Ralph Brendler
|1/11/18
|-
|Patrick Smith
|Ralph Brendler
|1/11/18
|-
|Bryan Pennington
|Ralph Brendler
|1/25/18
|-
|Brandon Kennedy
|Ralph Brendler
|2/22/18
|-}
|Charles Barker
|Ralph Brendler
|3/8/18
|-
|Dan Mach
|Ralph Brendler
|3/8/18
|-
|Bruce Mace
|Ralph Brendler
|3/8/18
|-
|Ricardo Staudt
|Ralph Brendler
|3/8/18
|-
|Mike Gucciard
|Ralph Brendler
|3/22/18
|-
|Adam Hall
|Paul V
|3/29/18
|-
|Bill Schroeder
|Ralph Brendler
|4/5/18
|-
|Gary Newhouse
|Eric Beauchamp
|4/26/18
|-}
|Dave DesRoberts
|Paul Van Lake
|4/26/18
|-
|Jennifer DesRoberts
|Paul Van Lake
|4/26/18
|-
|John Burkholder
|Ralph Brendler
|5/03/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/19/18
|-
| Chris Niziolek
| Ralph Brendler
| 6/14/18
|-
| Sam Wallinga
| Ralph Brendler
| 6/14/18
|-
| Bob Fritz
| Ralph Brendler
| 6/14/18
|-
| Nate Myren
| Ralph Brendler
| 6/14/18
|-
| Daniel Willmott
| Paul V
| 6/21/18
|-
| Mike Yacobucci
| Ralph Brendler
| 7/12/18
|-
| Joe Day
| Paul V
| 7/05/18
|-
| Aaron Hale
| Ralph Brendler
| 7/26/18
|-
| Geoff Klein
| Paul V
| 9/13/18
|-
| Farsheed Hamidi-Toosi
| Paul V
| 9/27/18
|-
| Will Holland
| Ralph Brendler
| 10/4/18
|-
| Gwenn-Ael Lynn
| Ralph Brendler
| 10/4/18
|-
|Jim Lund
|Paul Van Lake
|12/7/18
|-
|}

Grizzly 6" jointer

2018-12-07T22:45:28Z

Jimlund:

{{Template:EquipmentPage
|owner = PS1
|certification=yes
|hackable = NO
|model = G0654
|serial = NA
|arrived = Sept 2013
|doesitwork = Yes
|contact = Wood Shop Area Host
|where = Wood Shop
|value = $525.00
|hostarea = Wood Shop
|image = Jointer.jpg
}}

== Status ==
Appeared to be fully functional as of 15 Sept 2018.

October 16 2018. Several bad gouges/chips in blades. signs of severe misuse. Please check your materials for nails etc. Repaired but just barely.

Recently purchased from Matt Triano for a song. Thank you for everything, Matt!

'''This tool requires authorization for use.'''

{{WoodshopProctors}}

== Rules ==
# Always check your wood for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet.
# Remove the smallest amount of material possible and feed it at an appropriate speed. More passes are better than fewer. If you don't know how to properly adjust the infeed table, ask for help.
# Always use the vacuum while running the jointer. Otherwise, it will clog with chips.
# If you break something, or damage the tool, contact the area host immediately. Don't let others do more damage to the machine, ruin their work, or hurt themselves by using a broken tool.
# Always vacuum the machine, cutting area, and the table around the machine when you are done.

== Documentation ==
* [http://cdn0.grizzly.com/manuals/g0654_m.pdf Manual]
* [http://cdn0.grizzly.com/partslists/g0654_pl.pdf Parts List]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Matt Triano
|Owner
|
|-
|Marcin Ignasiak
|Eric Beauchamp
|
|-
|Jason Shanfield
|Matt Triano
|
|-
|Sam Drazin
|Matt Triano
|
|-
|Eric Beauchamp
|Matt Triano
|
|-
|Ryan Pierce
|Matt Triano
|
|-
|Pete Noverini
|Matt Triano
|
|-
|Mike Coriale
|Matt Triano
|
|-
|Will Garza
|Matt Triano
|
|-
|Chris Kleehammer
|[[User:jason|Jason Shanfield]]
|
|-
|Trey Elliott
|[[User:jason|Jason Shanfield]]
|
|-
|Nik Brink
|[[User:jason|Jason Shanfield]]
|
|-
|Bradley Topol
|Matt Triano
|
|-
|Mike Jones
|Matt Triano
|
|-
|Ray Doeksen
|[[User:jason|Jason Shanfield]]
|
|-
|Hunter Koerner
|Eric Beauchamp
|
|-
|Casey Olson
|Matt Triano
|
|-
|Eugene Liokumovich
|Matt Triano
|
|-
|Jeff Smykil
|Matt Triano
|
|-
|Scott Merrell
|Eric Beauchamp
|
|-
|Erik Wessing
|Eric Beauchamp
|
|-
|Glenn Trussell
|Eric Beauchamp
|
|-
|David Gutowsky
|Eric Beauchamp
|
|-
|Szymon Sambor
|Eric Beauchamp
|9/3/15
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/15
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/15
|-
|Shine Chen
|Eric Beauchamp
|11/19/15
|-
|Mike Forkan
|Eric Beauchamp
|11/19/15
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/15
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/15
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/15
|-
|Chris Kohl
|Andy Larkin
|1/21/16
|-
|Ian McGrath
|Andy Larkin
|1/21/16
|-
|Amner Castillo
|Eric Beauchamp
|2/26/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Colin Campbell
|Andy L
|5/5/16
|-
|Hans Griese
|Andy L
|5/5/16
|-
|Daniel Sojka
|Andy L
|
|-
|Ken Burkhardt
|Andy Larkin
|5/5/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
|Jim Brink
|Andy Larkin
|07/21/16
|-
|Derwin Umali
|Andy Larkin
|8/7/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|8/4/16
|-
|Joe Dowling
|Ken Burkhardt
|8/15/16
|-
|Simon Pyle
|Andy Larkin
|
|-
|Matt Meshulam
|Jason Shanfield
|8/24/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|Brian Cuocci
|Andy Larkin
|9/15/16
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Revant Ohri
|Andy L
|9/15/16
|-
|Sam Paris
|Ken Burkhardt
|
|-
|Aaron Mintz
|Ken Burkhardt
|10/17/16
|-
|Brian Carstensen
|Ken Burkhardt
|10/17/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Robert Richardson
|Ken Burkhardt
|10/17/16
|-
|Ryan Fiebing
|Ken Burkhardt
|10/24/16
|-
|Jack Berg
|Ken Burkhardt
|11/07/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Matt Schaid
|Andy Larkin
|01/05/17
|-
|Jamie Vollmer
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Chris Ruhland
|Andy Larkin
|01/19/17
|-
|Bruce Mace
|Eric Beauchamp
|02/20/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|Crystal Morales
|Andy Larkin
|3/16/17
|-
|Jason Pittman
|Andy Larkin
|3/16/17
|-
|Ashley Borg
|Andy Larkin
|4/13/17
|-
|Sam Chen
|Andy Larkin
|
|-
|Brett Sanderson
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|Andrew Vaughan
|Andy Larkin
|4/25/17
|-
|David Earl
|Ralph Brendler
|5/4/17
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Luis Colmenares
|Ralph Brendler
|6/1/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|Danielle MacDonald
|Ralph Brendler
|6/29/17
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Justin Pestka
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Mark Haughey
|Sevin Straus
|9/30/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/20/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/2/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Tee
|Paul V
|11/09/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Corey Toyama
|Ralph Brendler
|11/30/2017
|-
|Theo T
|Ralph Brendler
|11/30/2017
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Jeff Hassberger
|Ralph Brendler
|11/2/17
|-
|Mac MacDevitt
|Paul V
|12/7/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-
|[[User:atomala|Alex Tomala]]
|Ralph Brendler
|12/21/17
|-
|Jamin Nollsch
|Ralph Brendler
|12/28/17
|-
|Chris Versteeg
|Ralph Brandler
|12/28/17
|-
|Aaron Vander Bee
|Ralph Brendler
|1/11/18
|-
|Joseph Crouch
|Ralph Brendler
|1/11/18
|-
|Bradford Smith
|Ralph Brendler
|1/11/18
|-
|Stephanie Pelzer
|Ralph Brendler
|1/11/18
|-
|Amanda Assaley
|Ralph Brendler
|1/11/18
|-
|Chris Eppig
|Ralph Brendler
|1/11/18
|-
|Patrick Smith
|Ralph Brendler
|1/11/18
|-
|Jeff Gershune
|Paul VanLake
|1/16/18
|-
|Bryan Pennington
|Ralph Brendler
|1/25/18
|-
|Michael Ice
|Ralph Brendler
|2/08/18
|-
|Scott Fullman
|Ralph Brendler
|2/8/18
|-
|Brandon Kennedy
|Ralph Brendler
|2/22/18
|-
|Charles Barker
|Ralph Brendler
|3/8/18
|-
|Dan Mach
|Ralph Brendler
|3/8/18
|-
|Bruce Mace
|Ralph Brendler
|3/8/18
|-
|Ricardo Staudt
|Ralph Brendler
|3/8/18
|-
|Paul Graham
|Ralph Brendler
|3/22/18
|-
|Mike Gucciard
|Ralph Brendler
|3/22/18
|-
|[[User:waynr|Wayne Warren]]
|Ralph Brendler
|3/22/18
|-
|Bill Schroeder
|Ralph Brendler
|4/5/18
|-
|Mike Wilkin
|Ralph Brendler
|4/19/18
|-
|Alex Lanigan
|Ralph Brendler
|4/19/18
|-
|Jessica Jokhi
|Ralph Brendler
|4/19/18
|-
|Matt Maggio
|Ralph Brendler
|4/19/18
|-
|Jonathan Frink
|Ralph Brendler
|
|-
|4/19/18|Gary Newhouse
|Ralph Brendler
|4/26/18
|-}
|Dave DesRoberts
|Paul Van Lake
|4/26/18
|-
|Jennifer DesRoberts
|Paul Van Lake
|4/26/18
|-
| Wayne Hendryx
| Ralph Brendler
| 4/19/18
|-
|[[User:brendanf|Brendan Fortune]]
|Ralph Brendler
|5/17/18
|-
| Fritz Sullivan
| Ralph Brendler
| 5/30/18
|-
| Elizabeth Reuter
| Ralph Brendler
| 5/30/18
|-
| Kirsten Landmark Masih
| Ralph Brendler
| 6/07/18
|-
| Bob Fritz
| Ralph Brendler
| 6/14/18
|-
| Nate Myren
| Ralph Brendler
| 6/14/18
|-
| Tyler Works
| Ralph Brendler
| 6/14/18
|-
| Daniel Willmott
| Paul V
| 6/21/18
|-
| Bruce Levin
| Paul V
| 7/05/18
|-
| Joe Day
| Paul V
| 7/05/18
|-
| Mike Yacobucci
| Ralph Brendler
| 7/12/18
|-
| Kathryn Connolly
| Paul V
| 7/19/18
|-
| Sam Lewis
| Paul V
| 7/19/18
|-
| Aaron Hale
| Ralph Brendler
| 7/26/18
|-
| Adam Wilk
| Ralph Brendler
| 7/26/18
|-
| Geoff Klein
| Paul V
| 9/13/18
|-
| Earl Wood
| Paul V
| 9/13/18
|-
| Jacob Dawson
| Paul V
| 9/13/18
|-
| Ryan Treacy
| Paul V
| 9/20/18
|-
| Tim Bielawa
| Paul V
| 9/27/18
|-
| Will Holland
| Ralph Brendler
| 10/4/18
|-
| GWenn-Ael Lynn
| Ralph Brendler
| 10/4/18
|-
|Tatjana Paunesku (tpaune)
|Ralph Brendler
|11/29/18
|-
|Jim Lund
|Paul Van Lake
|12/6/18
|-
[[Category:Shop Equipment]]
[[Category:Wood Shop]]
[[Category:Loaned Equipment]]

Laguna 16" Planer

2018-12-07T04:48:06Z

Jimlund:

{{Template:EquipmentPage
|owner = PS:One
|certification = yes
|hackable = no
|model = MPLAN1510-0120
|serial = 144367
|arrived =
|doesitwork = yes
|contact =
|where = Wood Shop
|value = $3000
|image = LagunaPlaner.jpg
|hostarea = Wood Shop
}}
== reference material ==
[[file:Laguna16PlanerManual.pdf]]
== Guidelines for proper use ==
# '''Always''' check your wood for nails or staples. Something as small as the staple at the end of a 1x1 can ruin the blades. If you're not sure, check the entire piece with the metal detector sitting on the table saw.
# '''Always''' measure the thickness of your work and set the initial and working blade height to remove only small amounts of material per pass. You will damage the blades if you manage to dig the machine out on your work.
# If the machine is making a strange noise when you use it, there is a problem, and you should '''ask for help.'''
# If the blades are dull or damaged, '''contact the area host immediately.'''
# If you break something, or damage the tool, '''contact the area host immediately.''' Don't let others do more damage or hurt themselves by using a broken tool.
# '''Always''' make sure that the dust collection bag isn't too full and is passing air freely.
# '''Always''' vacuum the machine, cutting area, and the table around the machine when you are done.

'''This tool requires authorization for use.'''

== Checklist ==
PS1 is experimenting with the use of [[checklists]] to encourage the safe use and proper care of tools in the workspace. The latest version of the checklist for this tool is stored as a [https://docs.google.com/document/d/1C0pna59ZDq92vC2uEZM5ANUGh6qx-svit9atMhJNLm8/edit?usp=sharing Google Doc] that can be edited by anyone. If you make changes, update the effective date at the bottom of the document. Print a new copy, and replace the old one.

== External Links ==
*[https://lagunatools.com/classic-machinery/planers/planer-16-inch-4-post/ Manufacturer Page]
*[https://system.na3.netsuite.com/core/media/media.nl?id=661707&c=860860&h=94f90373845230ed877d&_xt=.pdf Owner's Manual]

{{WoodshopProctors}}

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Matt Triano
|Danger committee
|
|-
|Eric Beauchamp
|Danger committee
|
|-
|Jason Shanfield
|Matt Triano
|
|-
|Tom Judge
|Matt Triano
|
|-
|Hunter Koerner
|Eric Beauchamp
|
|-
|Deanna Williams
|Eric Beauchamp
|
|-
|Casey Olson
|Eric Beauchamp
|
|-
|Burton Kent
|Eric Beauchamp
|
|-
|Jeff Smykil
|Matt Triano
|
|-
|Anna Yu
|Jason Shanfield
|
|-
|Todd Allen
|Ron Olson
|
|-
|Jon Levine
|Jason Shanfield
|
|-
|Kyle Bieneman
|Eric Beauchamp
|
|-
|Niko Hawley
|Eric Beauchamp
|
|-
|-
|Adam Moffatt
|Eric Beauchamp
|
|-
|Marcin Ignasiak
|Eric Beauchamp
|
|-
|Keon Turner
|Ron Olson
|
|-
|Mike Mandrea
|Eric Beauchamp
|
|-
|Caleb Young
|Eric Beauchamp
|
|-
|Erik Wessing
|Eric Beauchamp
|
|-
|Doorman Dave
|Eric Beauchamp
|
|-
|Peter Letscher
|Eric Beauchamp
|11/05/15
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Shine Chen
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/03/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Chris Kohl
|Eric Beauchamp
|1/8/2016
|-
|Szymon Sambor
|Eric Beauchamp
|1/8/2016
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Shelly Loke-Gayares
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Julie Zwolinski
|Eric Beauchamp
|3/24/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Greg "Nerobro" Teiber
|Dan Locks
|4/29/16
|-
|Ken Burkhardt
|Andy Larkin
|5/5/16
|-
|Hans Griese
|Andy Larkin
|5/5/16
|-
|Spencer Simms
|Eric Beauchamp
|05/19/2016
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Ian Monroe
|Eric Beauchamp
|5/19/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
|Jim Brink
|Andy Larkin
|07/21/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|Derwin Umali
|Andy Larkin
|8/7/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Joe Dowling
|Ken Burkhardt
|8/15/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|Brian Cuocci
|Andy L
|9/15/16
|-
|Revant Ohri
|Andy L
|9/15/16
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Aaron Mintz
|Ken Burkhardt
|10/17/16
|-
|Brian Carstensen
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|Robert Richardson
|Ken Burkhardt
|10/17/16
|-
|Jack Berg
|Ken Burkhardt
|11/07/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Ashish Jasani
|Andy Larkin
|11/28/16
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|-
|Crystal Morales
|Andy Larkin
|2017-03-16
|-
|Jason Pittman
|Andy Larkin
|2017-03-16
|-
|Ashley Borg
|Andy Larkin
|4/13/17
|-
|Sam Chen
|Andy Larkin
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Molly Adamski
|Ralph Brendler
|4/27/17
|-
|Shabab Mustafa
|Ralph Brendler
|4/27/17
|-
|Adomas Tautkus
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|David Earl
|Ralph Brendler
|5/4/17
|-
|Luis Colmenares
|Ralph Brendler
|6/1/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Mark Haughey
|Sevin Straus
|9/30/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
| Tommy TBones Cramer
|Ralph Brendlet
|08/30/17
|-
|Mike Thariath
|Ralph Brendlet
|10/19/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/02/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Theo T
|Ralph Brendler
|11/30/2017
|-
|Jeff Hassberger
|Ralph Brendler
|11/2/17
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Mac MacDevitt
|Paul V
|12/7/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-
|[[User:atomala|Alex Tomala]]
|Ralph Brendler
|12/21/17
|-
|Jamin Nollsch
|Ralph Brendler
|12/28/17
|-
|Aaron Vander Bee
|Ralph Brandler
|1/11/18
|-
|Ben Farmer
|Ralph Brendler
|1/11/18
|-
|Joseph Crouch
|Ralph Brendler
|1/11/18
|-
|Bradford Smith
|Ralph Brendler
|1/11/18
|-
|Amanda Assaley
|Ralph Brendler
|1/11/18
|-
|Chris Eppig
|Ralph Brendler
|1/11/18
|-
|Patrick Smith
|Ralph Brendler
|1/11/18
|-
|Jeff Gershune
|Paul VanLake
|1/16/18
|-
|Bryan Pennington
|Ralph Brendler
|1/25/18
|-
|Scott Fullman
|Ralph Brendler
|2/8/18
|-
|Brandon Kennedy
|Ralph Brendler
|2/22/18
|-
|Charles Barker
|Ralph Brendler
|3/8/18
|-
|Dan Mach
|Ralph Brendler
|3/8/18
|-
|Bruce Mace
|Ralph Brendler
|3/8/18
|-
|Nick Prorok
|Ralph Brendler
|3/8/18
|-
|Ricardo Staudt
|Ralph Brendler
|3/8/18
|-
|Paul Graham
|Ralph Brendler
|3/22/18
|-
|Mike Gucciard
|Ralph Brendler
|3/22/18
|-
|[[User:waynr|Wayne Warren]]
|Ralph Brendler
|3/22/18
|-
|Adam Hall
|Paul V
|3/29/18
|-
|Bill Schroeder
|Ralph Brendler
|4/5/18
|-
|Mike Wilkin
|Ralph Brendler
|4/19/18
|-
|Alex Lanigan
|Ralph Brendler
|4/19/18
|-
|Jessica Jokhi
|Ralph Brendler
|4/19/18
|-
|Matt Maggio
|Ralph Brendler
|4/19/18
|-
|Jonathan Frink
|Ralph Brendler
|4/19/18
|-}
|Gary Newhouse
|Ralph Brendler
|4/26/18
|-}
|Dave DesRoberts
|Paul Van Lake
|4/26/18
|-
|Jennifer DesRoberts
|Paul Van Lake
|4/26/18
|-
|John Burkholder
|Ralph Brendler
|5/03/18
|-
| Wayne Hendryx
| Ralph Brendler
| 4/19/18
|-
|[[User:brendanf|Brendan Fortune]]
|Ralph Brendler
|5/17/18
|-
| Kirsten Landmark Masih
| Ralph Brendler
| 6/07/18
|-
| Bob Fritz
| Ralph Brendler
| 6/14/18
|-
| Nate Myren
| Ralph Brendler
| 6/14/18
|-
| Eli Schlossberg
| Ralph Brendler
| 6/14/18
|-
| Tyler Works
| Ralph Brendler
| 6/14/18
|-
| Daniel Willmott
| Paul V
| 6/21/18
|-
| Bruce Levin
| Paul V
| 7/05/18
|-
| Joe Day
| Paul V
| 7/05/18
|-
| Mike Yacobucci
| Ralph Brendler
| 7/12/18
|-
| Kathryn Connolly
| Paul V
| 7/19/18
|-
| Sam Lewis
| Paul V
| 7/19/18
|-
| Aaron Hale
| Ralph Brendler
| 7/26/18
|-
| Adam Wilk
| Ralph Brendler
| 7/26/18
|-
|Tom Henderson
|Ralph Brendler
|2018-08-09
|-
| Kelvin Lane
| Paul V
| 9/13/18
|-
| Geoff Klein
| Paul V
| 9/13/18
|-
| Earl Wood
| Paul V
| 9/13/18
|-
| Farsheed Hamidi-Toosi
| Paul V
| 9/27/18
|-
| Will Holland
| Ralph Brendler
| 10/4/18
|-
| Gwenn-Ael Lynn
| Ralph Brendler
| 10/4/18
|-
| Will Brown
| Ralph Brendler
| 10/31/18
|-
| Tatjana Paunesku (tpaune)
| Ralph Brendler
| 11/29/18
|-
|Jim Lund
|Paul Van Lake
|12/6/18
|-
[[Category:Wood Shop]]
[[Category:Shop Equipment]]

Angle Grinder (4.5in)

2018-12-02T16:26:40Z

Jimlund:

{{Template:EquipmentPage
|owner=PS:One
|model=Bosch Angle Grinder (model: ???)
|serial=TBD|arrived=4-24-2011
|doesitwork=yes
|contact=Hot Metals Area Host
|where=Hot Metals
|certification=yes
|hackable=no
|value=$20}}

== Certification ==

==== Description ====
Description: 
Angle Grinders are powerful electric motors mounted to a 90deg gearbox. This allows the working tool to be easily manipulated and applied to the work. They typically have a 5/8" arbor, on which you mount cutoff wheels, small grinding wheels, wire wheels, sanding disks, and various other spinny type things. 

== Safe Operation ==
To avoid accidents, the following operational safety rules must be observed by everyone working on the Pumping Station: One (PS:One) angle grinder. Failure to follow the safety rules may result in a loss of shop privileges. 
 
=== Start With A Risk Assessment To Ensure A Safe Work Area: ===
1. Angle grinders typically throw sparks when cutting metal. Make sure that there's nothing flammable in the direction sparks will fly. This includes your clothing. 
2. Make sure your work is properly secured. The workpiece should be in a vice, or heavy enough that it won't move without your intending for it to move. The angle grinder has approximately 2/3 of a horsepower coming from it, so it can, and will, make things move. 
=== Instructions and rules for using the grinder: ===
1. Keep both hands on the grinder. It has two handles for a reason. 
2. Do not remove the safety guard. It can be rotated, but it should not be removed unless a buffing pad is being used. 
3. Do not set the grinder down with the wheel down. If it accidentally gets turned on, it will run away, or worse, run towards you. 
4. Wait until the wheel has stopped spinning before you set the grinder down. 
=== Maintnance and replacement of parts ===
Always return the grinder to its box. 
Spare parts and wheels are stored in the box with the grinder. 
 
Replacing a wheel on the grinder: 
1. unplug the grinder 
2. depress the spindle locking button on the grey section of the grinder 
3. use spanner wrench to loosen the retaining nut 
4. remove and replace accessory disk. (some disks don't use the nut, such as wire wheels.) 

=== Other resources ===
https://youtu.be/X8i7Ga1UqEE?t=1m21s 

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date Trained
|-
|Greg Teiber
|Owner, several years experience
|-
|Aaron Diddier
|Greg Teiber
|-
|Karol Slowikowski
|[[User:kuroishi|David Koppel]]
|-
|Eric Yu
|Ron Olson
|-
|David Srebro
|Ron Olson
|-
|Glenn Powers
|Ron Olson
|-
|Jeff Lawson
|Ron Olson
|-
|James Villalpando
|Ron Olson
|-
|Hunter Koerner
|Ron Olson
|-
|Raj Perera
|Ron Olson
|-
|Erik Wessing
|Ron Olson
|-
|Sam Paris
|Todd Allen
|-
|Niko Hawley
|Ron Olson
|-
|Aaron Carlock
|Ron Olson
|-
|Mike Forkan
|Ron Olson
|-
|Greg Kudlacz
|Ron Olson
|-
|Daniel Maziarz
|Ron Olson
|-
|Jim Baker
|Ron Olson
|-
|Brandon Love
|Michael Patton
|1/27/16
|-
|Carlos Garcia
|Michael Patton
|?/?/16
|-
|Ian Monroe
|Michael Patton
|6/29/16
|-
|Joe Iklov
|Michael Patton
|6/29/16
|-
|[[user:mct|McTavish McArdle]]
|Michael Patton
|2016-07-10
|-
|Eugene Liokumovich
|Michael Patton
|9/10/2016
|-
|Sam Olendorf
|Michael Patton
|9/10/2016
|-
|Matthew Quigley
|Michael Patton
|-
|Brian Cuocci
|Michael Patton
|10/5/16
|-
|Chris Iacullo
|Daron Wooding
|11/26/16
|-
|Abel Greenwald
|Michael Patton
|-
|Clarence Bartenhagen
|Chris Iacullo
|5/5/17
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Chris Iacullo
| May 11, 2017
|-
|Andrew Wingate
|Chris Iacullo
|7/6/17
|-
|Arjun Sharma
|Chris Iacullo
|7/28/17
|-
| Kari Danek
| Chris Iacullo
| 1/25/18
|-
| Bruce Levin
| Chris Iacullo
| 8/16/2018
|-
| Aaron Hale
| Chris Iacullo
| 8/16/2018
|-
|Will Spears
|Chris Iacullo
|9/12/18
|-
|Ryan Pierce
|Chris Iacullo
|9/12/18
|-
| Mike Ice
| Ron Olson
| 9/22/18
|-
| Jim Lund
| Daron Wooding
| 12/01/18
|}

[[Category:Shop Equipment]]
[[Category:Photographs Needed]]

Forge

2018-12-02T16:23:59Z

Jimlund:

{{Template:EquipmentPage|owner=PS:One
|model=Deulux 2 Burner Knife Makers Forge
|serial=N/A
|arrived=Yes
|doesitwork= yes
|contact= Tom Judge
|where=Hot Metals Area
|certification=yes
|hackable=no
|value=$375
|image = None}}

== Gas Cost Contribution ==

If you use the shop tank you are required to pay for your gas, gas is priced at '''$5/hour''' of forge use. This may change in the future after we research the cost effectiveness of a larger tank.

== How to get authorized ==

Authorization process will be a spot test on the contents of this page of the wiki and demonstrating that you can safely light the forge.

== Lighting the forge ==

* '''DO NOT ATTEMPT TO LIGHT THE FORGE WITH A MATCH OR LIGHTER (EVEN A LONG LIGHTER/MATCH)'''
* '''MAKE SURE THAT THE GAS HOSE IS NOT TOUCHING THE SIDE OF THE FORGE OR PASSING IN FRONT OF AN OPENING'''

To light the forge:

# Set the sign above the forge to '''HOT'''
# Open the rear door of the space if it is not already open!
# Make sure the burner valves are completely closed!!
# Turn on the valve for the propane tank
# Adjust the pressure regulator on the tank to 10PSI. - If the pressure is too high you will have to open a burner valve slightly to let some pressure out.
# Place a lit piece of paper into the forge
# Making sure the paper is still alight, slightly open the valve for the front burner and allow the forge to light
#* If the burner does not light within a few seconds turn off the valve and reposition the paper
#* If the burner still does not light, check the valve on the propane tank is open far enough
#* If the burner does not light after a second attempt '''DO NOT ATTEMPT TO LIGHT IT AGAIN''' contact the area host for instructions on how to proceed.
# Once the burner is lit adjust the valve until there is a constant feathered flame
#* If you are unable to get a constant flame do not use the forge and contact the area host for further instructions
# If you require the second burner open the valve for the rear burner 1/8th of a turn and allow it to light
# Adjust the valve to get a constant flame as you did for the first

== Important Information Regarding the Forge ==

# Carbon Steel '''ONLY'''! No other material can be placed in the forge.
# '''NO''' galvanized, painted, or otherwise coated steel in the forge.
# '''Do NOT''' poke the sides or back of the forge with your piece. The back hole is slightly higher than the bottom firebrick - please gently place your piece in and then rest it down on the bottom of the forge.
# Make sure the fuel line is '''NEVER''' touching the side of the forge.
# If the torch is sputtering there is something wrong. Try to give it a little more air and more fuel. If that doesn't work, you might be low on fuel. If it continues sputtering turn it off and alert the Area Host.
# Always assume the forge, any nearby tools, and the surrounding area is hot.

== Forge Welding/Flux Use ==

If you are going to use flux for any reason you '''MUST line the interior of the forge with non glazed floor tiles to protect the liner of the forge'''. Anyone caught not using the correct liner will have their certification revoked from the forge.

== Helpful Hints ==

* Directly under the burner is the hottest place in the forge - if you want something heated fast, place it there.
* Your steel will be as hot as it can be when it nearly matches the color of the forge around it.
* Try not to leave tools next to the forge when it is on - they will get very hot.
* Keep your tools cool by quenching often.
* If you have a question or something seems off - contact the area host.
* If you plan on using the forge for a large project you should provide your own tank
* If the tank is less than half full it may freeze during use, if this happens shutdown the forge and allow the tank to warm back up before you light the forge again.
* If the liner of the forge has a crack large enough for gas to enter, stop using the forge let the area host know.
* If you encounter an issue with the forge that requires contacting the area host you must place an out of service sign on the forge including why.

== List of recommended Certifiers ==

* Tom Judge
* Michael Skilton

== List of Currently Certified Users ==

{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Tom Judge
|Area Host
|-
|[[user:kuroishi|David Koppel]]
|Tom Judge
|-
|[[user:justin|Justin T. Conroy]]
|Tom Judge
|-
|Ryan Pierce
|Tom Judge
|-
|Jason Shanfield
|Tom Judge
|-
|Dean Anderson
|Tom Judge
|-
|Michael Skilton
|Tom Judge
|-
|Nick Naro
|Ron Olson
|-
|Raj Perera
|Ron Olson
|-
|Jennie P.
|Ron Olson
|-
|[[user:mkeith|Matt Keith]]
|Michael Skilton
|-
|Aaron Carlock
|Michael Skilton
|-
|Jim Baker
|Michael Skilton
|-
|Chris Iacullo
|Daron Wooding
|11/26/16
|-
|Clarence Bartenhagen
|Chris Iacullo
|5/5/17
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Chris Iacullo
| May 11, 2017
|-
|Nick Prorok
|Chris Iacullo
|6-7-2018
|-
|Mariano Muñoz
|Chris Iacullo
|09-19-2018
|-
|Will Spears
|Michael Skilton
|9/19/18
|-
|Tatjana Paunesku (tpaune)
|Michael Skilton
|11/21/18
|-
| Jim Lund
| Daron Wooding
| 12/01/18
|-
|-}

Sears Belt Sander

2018-12-02T16:21:00Z

Jimlund:

{{Template:EquipmentPage
|owner = PS1
|certification = yes
|hackable = NO
|model = 351.215132
|serial = SERIAL NUMBER
|arrived = 12/01/12
|doesitwork = yes
|contact = Ron Olsen
|where = [[Hot Metals]]
|value = DOLLARS
|image = Sears_belt_sander.jpg
}}
== General ==
* '''Belt Size: ''' 2 x 42"
* '''Disk Size: ''' 6"

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Mike Warot
|Danger Committee
|-
|Dave Schact
|Mike Warot
|-
|Barmey Ung
|Mike Warot
|-
|Michael Leinartas
|Adrianna McKinley
|-
|Todd Allen
|Ed Bennet
|-
|Kyle Bieneman
|Todd Allen
|-
|Scott Little
|Todd Allen
|-
|RJ Metzger
|Todd Allen
|-
|Giovanni Arroyo
|Todd Allen
|-
|Joao Santos
|Todd Allen
|-
|Nicholas Haldereman
|Todd Allen
|-
|Doorman Dave
|Todd Allen
|-
|Stephen Ioannou
|Todd Allen
|-
|Lucas Goossen
|Todd Allen
|-
|[[user:RogerMoore|Roger Moore]]
|Todd Allen
|-
|[[User:Mwilkens|Matt Wilkens]]
|Todd Allen
|-
|Rhonda Jackson
|Todd Allen
|-
|Matt Meshulam
|Todd Allen
|-
|Kevin Pulver
|Todd Allen
|-
|Andrew Camardella
|Todd Allen
|-
|Mike Coriale
|Todd Allen
|-
|Nick Naro
|Todd Allen
|-
|John Farmer
|Todd Allen
|-
|[[user:Jaypee|Jay Pee]]
|Todd Allen
|-
|Sam Paris
|Todd Allen
|-
|Jake Rush
|Todd Allen
|-
|Carolyn Ignacio
|Todd Allen
|-
|Andrew Sowa
|Todd Allen
|-
|Hilary Lee
|Todd Allen
|-
|Eric Slehofer
|Todd Allen
|-
|Sam Reicks
|Todd Allen
|-
|Tyler Matthew
|Todd Allen
|-
|Ben Bogler
|Todd Allen
|-
|Brittany Krawczyk
|Todd Allen
|-
|Cary Lahucik
|Todd Allen
|-
|Dan Baltudis
|Todd Allen
|-
|Ryan Taylor
|Everett Wilson
|-
|Andy Richardson
|Everett Wilson
|-
|Jeff Lawson
|Ron Olson
|-
|Hunter Koerner
|Ron Olson
|-
|Erik Wessing
|Ron Olson
|-
|Raj Perera
|Ron Olson
|-
|Jim Baker
|Ron Olson
|-
|Jonathan Levine
|Todd Allen
|9/23/15
|-
|Alejandro Drexler
|Todd Allen
|9/23/15
|-
|Burton Kent
|Eric Beauchamp
|9/24/15
|-
|Niko Hawley
|Ron Olson
|-
|Peter Letscher
|Todd Allen
|10/28/15
|-
|Jennie P
|Ron Olson
|11/18/15
|-
|Kurt Ziegel
|Ron Olson
|11/18/15
|-
|Jean Michel Crettaz
|Ron Olson
|-
|Sheila Miguez
|Everett Wilson
|2015/12/29
|-
|Brandon Love
|Michael Patton
|1/27/16
|-
|Connor Sullivan
|Tom Judge
|1/22/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
| Andrew Wingate
| Chris Iacullo
| July 6, 2017
|-
| Miriam Stevens
| Chris Iacullo
| July 27, 2017
|-
| Brandon Kennedy
| Daron Wooding
| 3/17/18
|-
|4/19/18|Gary Newhouse
|Eric Beauchamp
|4/26/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/11/18
|-
| Ruy Calderon
| Chris Iacullo
| 5/24/18
|-
| Jake Chaitkin
| Chris Iacullo
| 5/24/2018
|-
| Mark Treiber
| Chris Iacullo
| 8/16/2018
|-
| Jim Lund
| Daron Wooding
| 12/01/18
|-}

[[Category:Equipment]]
[[Category:Hot Metals]]

Hot Metals Belt Sander

2018-12-02T16:17:46Z

Jimlund:

{{Template:EquipmentPage
|owner = PS:One
|hostarea = Hot Metals
|certification = yes
|hackable = no
|model = TLS-362
|serial = SERIAL NUMBER
|arrived = 11/2016
|where = Hot Metals, rack wall
|doesitwork = yes
|contact = [[:Category:Hot Metals|Hot Metals Area Host]]
|value = $500
|image = TLS-MT362 Multitool-Bench-Grinder1 LRG.jpg
}}

This is a brand new page. It needs an equipment template applied to it!

If you know more about this machine, please update this wiki page and make an equipment label for it.

Information to gather:

* status
* how to get authorized
* photo of the thing
* make and model, serial number
* type of electrical power required
* parts numbers or links for ordering consumables (belts!)
* link to service manuals, operator's manuals
* who owns it?

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
| Sam Paris
| Daron(?)
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Chris Iacullo
| May 11, 2017
|-
| Andrew Wingate
| Chris Iacullo
| July 6, 2017
|-
| Miriam Stevens
| Chris Iacullo
| July 27, 2017
|-
| Nils Werner
| Daron Wooding
| September 16, 2017
|-
|[[User:Ekaj|Jacob Snyder]]
|Daron Wooding
|9/16/17
|-
| Stephanie Pelzer
| Chris Iacullo
| 1/11/18
|-
| Chris Versteeg
| Chris Iacullo
| 1/11/18
|-
| Aaron Vander Bee
| Daron Wooding
| 3/17/18
|-
| Brandon Kennedy
| Daron Wooding
| 3/17/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/11/18
|-
| Matt Maggio
| Chris Iacullo
| 5/10/18
|-
| Ruy Calderon
| Chris Iacullo
| 5/24/18
|-
| Jake Chaitkin
| Chris Iacullo
| 5/24/2018
|-
| Nick Prorok
| Chris Iacullo
| 6/07/18
|-
| Daniel Willmott
| Chris Iacullo
| 6/21/18
|-
| Kevin Wendt
| Abel Greenwald
| 7/6/2018
|-
| Zack Sasnow
| Chris Iacullo
| 7/26/2018
|-
| Alex Zhu
| Chris Iacullo
| 7/26/2018
|-
| Mark Treiber
| Chris Iacullo
| 8/16/2018
|-
|Will Spears
|Chris Iacullo
|9/12/18
|-
|Ryan Pierce
|Chris Iacullo
|9/12/18
|-
| Ryan Treacy
| Chris Iacullo
| 9/22/18
|-
| Jacob Dawson
| Chris Iacullo
| 9/22/18
|-
| Jim Lund
| Daron Wooding
| 12/01/18
|-}

[[Category: Hot Metals]]

DeWalt Chop Saw

2018-12-02T16:16:53Z

Jimlund:

{{Template:EquipmentPage
|owner=PS1
|model=14" Chop Saw
|serial=?
|arrived=5/10/2015
|doesitwork=yes
|contact=Ron Olson
|where=Hot Metals
|certification=yes
|hackable=no
|value=$200
|image=IMG_2204.JPG
|hostarea = Hot Metals
}} 
== Status ==
Tool appeared to be behaving normally during 22 Sept Auth and subsequent use on 07 Oct 2018.

== Authorization ==
Authorization is done via the Tier 1 class
== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Hunter Koerner
|Ron Olson
|6/14/15
|-
|Raj Perera
|Ron Olson
|6/14/15
|-
|-
|Erik Wessing
|Ron Olson
|
|-
|Aji Slater
|Ron Olson
|7/12/15
|-
|Jim Baker
|Ron Olson
|
|-
|Todd Allen
|Ron Olson
|
|-
|Tom Boeman
|Ron Olson?
|8/30/15
|-
|Jonathan Levine
|Todd Allen
|9/23/15
|-
|Lauren Svedman
|Ron Olson
|
|-
|Niko Hawley
|Ron Olson
|
|-
|Glenn Powers
|Ron Olson
|10/18/15
|-
|Aaron Carlock
|Ron Olson
|11/18/15
|-
|Jennie P
|Ron Olson
|11/18/15
|-
|Kurt Ziegel
|Ron Olson
|11/18/15
|-
|Mike Forkan
|Ron Olson
|11/18/15
|-
|Marcin Ignasiak
|Ron Olson
|
|-
|Greg Kudlacz
|Ron Olson
|
|-
|Elizabeth Arundel
|Ron Olson
|10/18/15
|-
|Daniel Maziarz
|Ron Olson
|
|-
|Jean Michel Crettaz
|Ron Olson
|
|-
|Dafe Hughes
|Ron Olson
|12/16/15
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/15
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/15
|-
|Andrew Dalesandro
|Michael Patton
|1/10/16
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Tony Johnson
|Michael Patton
|1/10/16
|-
|Brandon Love
|Michael Patton
|1/27/16
|-
|Connor Sullivan
|Tom Judge
|1/22/16
|-
|Keith Couture
|Ron Olson
|3/1/16
|-
|Adam Stafford
|Michael Patton
|4/17/16
|-
|Jordan Montes
|Ron Olson
|5/4/16
|-
|Carlos Garcia
|Michael Patton
|6/5/16
|-
|Ian Monroe
|Michael Patton
|6/29/16
|-
|Ken Burkhardt
|Andrew Carmadella
|
|-
|Joe Iklov
|Michael Patton
|6/29/16
|-
|Jim Brink
|Michael Patton
|6/29/16
|-
|Frank Bowles
|Michael Patton
|6/29/16
|-
|Eugene Liokumovich
|Michael Patton
|
|-
|Matthew Quigley
|Michael Patton
|
|-
|Sam Olendorf
|Michael Patton
|
|-
|Brian Cuocci
|Michael Patton
|10/5/16
|-
|[[User:ajasani|Ashish Jasani]]
|Michael Patton
|11/7/16
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Chris Iacullo
| 5/11/17
|-
| Andrew Wingate
| Chris Iacullo
| 7/6/17
|-
| Miriam Stevens
| Chris Iacullo
| 7/27/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Daron Wooding
|9/16/17
|-
|Jacqueline Villa
|Maria Miller
|10/3/17
|-
|Daron Wooding
|Nils Werner
|9/16/17
|-
|Wally Ibrahim
|Daron Wooding
|10/21/17
|-
| Stephanie Pelzer
| Chris Iacullo
| 1/11/18
|-
| Chris Versteeg
| Chris Iacullo
| 1/11/18
|-
| Kari Danek
| Chris Iacullo
| 1/25/18
|-
| Mike Ice
| Daron Wooding
| 2/17/18
|-
| Aaron Vander Bee
| Daron Wooding
| 3/17/18
|-
| Brandon Kennedy
| Daron Wooding
| 3/17/18
|-
| Jonathan Frink
| Chris Iacullo
| 1/25/18
|-
|Gary Newhouse
|Eric Beauchamp
|4/26/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/11/18
|-
| Matt Maggio
| Chris Iacullo
| 5/10/18
|-
| Jake Chaitkin
| Chris Iacullo
| 5/24/2018
|-
| Kevin Wendt
| Abel Greenwald
| 7/6/2018
|-
| Zack Sasnow
| Chris Iacullo
| 7/26/2018
|-
| Alex Zhu
| Chris Iacullo
| 7/26/2018
|-
| Mark Treiber
| Chris Iacullo
| 8/16/2018
|-
| Bruce Levin
| Chris Iacullo
| 8/16/2018
|-
| Aaron Hale
| Chris Iacullo
| 8/16/2018
|-
|Will Spears
|Chris Iacullo
|9/12/18
|-
|Ryan Pierce
|Chris Iacullo
|9/12/18
|-
| Ryan Treacy
| Chris Iacullo
| 9/20/18
|-
| Jacob Dawson
| ?Daron
| 9/22/2018
|-
| Jim Lund
| Daron Wooding
| 12/01/18
|-}
[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Hot Metals]]

Millermatic 252

2018-12-02T16:15:35Z

Jimlund:

{{Template:EquipmentPage
|image=IMG_3785.jpg
|owner=PS:One
|model=Millermatic 252
|serial=MH170451N
|arrived=May, 2017
|doesitwork=yes
|contact=Ron Olson
|where=Hot Metals
|certification=yes
|hackable=no
|value=$3800
|hostarea = Hot Metals
}}

For safety tips and a general operational overview, see the article on PS1's [[MIG welders]].

==Official Information==
===Manual===
[https://www.millerwelds.com/files/owners-manuals/O230693L_MIL.pdf Manual for the Millermatic 252 on Miller Electric's site]
===Speeds and Feeds Guides===
[https://docs.google.com/spreadsheets/d/1CJpimBJEAodCKnKHwkKSR2MHZgksYvYgagw921qbFZo/edit?usp=sharing Speeds and feeds from the manual for this machine]
===Marketing Material===
[https://www.millerwelds.com/equipment/welders/mig-gmaw/millermatic-252-mig-welder-m00218 Glossy]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Ron Olson
|Danger Committee
|
|-
|Tom Judge
|Danger Committee
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Chris Iacullo
| May 11, 2017
|-
| Andrew Wingate
| Chris Iacullo
| July 6, 2017
|-
| Miriam Stevens
| Chris Iacullo
| July 27, 2017
|-
|[[User:Ekaj|Jacob Snyder]]
|Daron Wooding
|9/16/17
|-
|Daron Wooding
|Touly Phiachantharath
|
|-
| Nils Werner
| Daron Wooding
| Sep 16, 2017
|-
| Stephanie Pelzer
| Chris Iacullo
| 1/11/18
|-
| Chris Versteeg
| Chris Iacullo
| 1/11/18
|-
| Kari Danek
| Chris Iacullo
| 1/25/18
|-
| Aaron Vander Bee
| Daron Wooding
| 3/17/18
|-
| Molly Adamski
| Daron Wooding
| 3/17/18
|-
| Brandon Kennedy
| Daron Wooding
| 3/17/18
|-
| Jonathan Frink
| Chris Iacullo
| 4/19/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/11/18
|-
| Matt Maggio
| Chris Iacullo
| 5/10/18
|-
| Jake Chaitkin
| Chris Iacullo
| 5/24/2018
|-
|[[user:Brendanf|Brendan Fortune]]
|[[user:Tachoknight|Ron Olson]]
| 12-May-2018
|-
| Nick Prorok
| Chris Iacullo
| 6/07/18
|-
| Daniel Willmott
| Chris Iacullo
| 6/21/18
|-
| Zack Sasnow
| Chris Iacullo
| 7/26/18
|-
| Alex Zhu
| Chris Iacullo
| 7/26/2018
|-
| Mark Treiber
| Chris Iacullo
| 8/16/2018
|-
| Bruce Levin
| Chris Iacullo
| 8/16/2018
|-
| Aaron Hale
| Chris Iacullo
| 8/16/2018
|-
|Will Spears
|Chris Iacullo
|9/12/18
|-
|Ryan Pierce
|Chris Iacullo
|9/12/18
|-
|Jacob Dawson
| ?Daron
|09/22/2018
|-
| Jim Lund
| Daron Wooding
| 12/01/18
|}

[[Category:Welder]]
[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Hot Metals]]

Lincoln Electric 3200HD

2018-12-02T16:14:40Z

Jimlund:

{{Template:EquipmentPage
|owner = PS:One
|certification = yes
|hackable = no
|model = Weld Pak 3200HD
|arrived = 2015-04-27
|doesitwork = yes
|where = Hot Metals
|value = $340
|contact = Ron Olson
|image = IMG_1583.JPG
|hostarea = Hot Metals
}}

Essentially "a hot melt glue gun for metals". It releases 75% argon / 25% CO2 gas as you weld to prevent oxidation of the metal. You're melting the metals you're joining, and adding a bead as well.

For safety tips and a general operational overview, see the article on PS1's [[MIG welders]].

== Status ==

Standard electric power plug has been replaced with a NEMA 5-20 type plug, plugs right into the wall socket there but won't plug into a power strip or extension cord.

== Some Info ==
http://www.4x4review.com/lincoln-eletrics-weld-pak-3200-hd-mig-welder/

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Authorized Member Keon Turner
! Authorized By
! Date
|-
|Alejandro Drexler
|Ron Olson
|
|-
|Chris Agocs
|Ron Olson
|
|-
|Yousef Zaffarkhan
|Ron Olson
|
|-
|Andy Larkin
|Ron Olson
|
|-
|Samuel Sion
|Ron Olson
|
|-
|Lauren Svedman
|Ron Olson
|
|-
|Aaron Carlock
|Ron Olson
|
|-
|Greg Kudlacz
|Ron Olson
|
|-
|Daniel Maziarz
|Ron Olson
|
|-
|Connor Sullivan
|Tom Judge
|
|-
|Keith Couture
|Ron Olson
|
|-
|Jordan Montes
|Ron Olson
|
|-
|Ken Burkhardt
|Ron Olson
|
|-
|Sam Olendorf
|Ron Olson
|
|-
|Eugene Liokumovich
|Ron Olson
|
|-
|[[user:mkeith|Matt Keith]]
|Ron Olson
|
|-
|[[user:panchan99|Juan Ramos]]
|Jeremy Bloyd-Peshkin
|
|-
|[[user:smash|Ashley Matrisciano]]
|Jeremy Bloyd-Peshkin
|
|-
|[[user:smash|Burton Kent]]
|Jeremy Bloyd-Peshkin
|
|-
|Brian Cuocci
|Ron Olson
|
|-
|Sam Paris
|Ron Olson
|
|-
|Clarence Bartenhagen
|Chris Iacullo
|
|-
|[[user:Pedrosk|Ed Breuer]]
|Chris Iacullo
|Feb 2017
|-
| Matthew Kim
| Chris Iacullo
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Chris Iacullo
| May 11, 2017
|-
| Miriam Stevens
| Chris Iacullo
| July 27, 2017
|-
| Daron Wooding
| Touly Phiachantharath
|
|-
| Wally Ibrahim
| Daron Wooding
| 10/21/17
|-
| Stephanie Pelzer
| Chris Iacullo
| 1/11/18
|-
| Chris Versteeg
| Chris Iacullo
| 1/11/18
|-
| Kari Danek
| Chris Iacullo
| 1/25/18
|-
| Mike Ice
| Daron Wooding
| 2/17/18
|-
| Brandon Kennedy
| Daron Wooding
| 3/17/18
|-
| Aaron Vander Bee
| Daron Wooding
| 3/17/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/11/18
|-
| Lucas Goossen
| Daron Wooding
| 4/28/18
|-
| Nick Prorok
| Chris Iacullo
| 6/07/18
|-
| Mark Treiber
| Chris Iacullo
| 8/16/2018
|-
| Jacob Dawson
| ?Daron
| 9/22/2018
|-
| Jim Lund
| Daron Wooding
| 12/01/18
|-}

[[Category: Hot Metals]]

Tier 1 Cold Metals Authorization

2018-11-14T15:31:46Z

Jimlund:

[[Category:Cold Metals]]

In the cold metals area we have grouped together authorizations on the non-precision cutting tools into a single authorization. ''The handout (the "script") we use is at [[Cold Metals Tier 1]]''. The [[Rockwell drill press]], [[Johnson Bandsaw]], and [[DoAll Bandsaw]] are under a Cold Metals Tier 1 authorization process. The session covers basic operation and safety on the machines.

'''NOTE: Prior to April 2017, the [[Bench Grinder (6in)]], [[Sears Belt Sander|Belt Sander]], and [[DeWalt Chop Saw]] were included in this authorization. Currently, these tools are covered in a separate authorization, Hot Metals Tier 1'''

Monitor the mailing list for times and dates.

== Tools Requiring Cold Metals Tier 1 ==

[[Clausing Lathe|Clausing metal lathe]]

[[Bridgeport Knee Mill|Bridgeport milling machine]]

[[Tormach 1100 series CNC mill|Tormach CNC Mill]]

== Cold Metals Tier 1 Authorizers ==

Cold Metals Tier 1 authorization can currently be done by the following people:

{| class="wikitable" border="1"
! Cold Metals Tier 1 Authorizers
|-
|Michael Patton - Primary
|-
|Ed Bennett
|-
|Anna Yu
|-
|Thomas Wright
|-
|Sam Olendorf
|-
|Abel Greenwald
|-
|Chris Ruhland
|-
|Jim Brink
|-
|[[User:mct|McTavish McArdle]]
|}

=== How to become a Authorizer ===

We want as many people available to do Cold Metals Tier 1 authorizations as we can get.
The idea is to promote safety, and get people used to the sounds that a machine tool cutting well makes.
New authorizers get authorized to authorize others by (1) having some
amount of presence in the shop and (2) closely following the "script"
during EITHER a "dry-run" authorizing session given to an authorized
authorizer -- or conducting a real-live authorizing session while being
observed by an authorized authorizer. During such a session, the
observing authorizer should _not_ have to speak. Obviously if the new
authorizer-to-be has _significant_ problems in communication of the
content of the "script", the observing authorizer will contribute to the
discussion. For the new authorizer-to-be it's a test, not an opportunity
for team-teaching.

==== Cold Metals Tier 1 Areas Convention of Authorization ====

[[Cold Metals Tier 1]]

== People who are Authorized for Cold Metals Tier 1 ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
!Date Trained
|-
|Will Brown
|Sam
|9/5/18
|-
|Adam Glick
|Ed Bennett
|
|-
|Jeffrey Camealy
|Ed Bennett
|
|-
|Tina Croniser
|Ed Bennett
|
|-
|Sevin Straus
|Ed Bennett
|
|-
|Vladamir Riazanski
|Ed Bennett
|
|-
|James Porter
|Ed Bennett
|
|-
|Greg Teiber
|Ed Bennett
|
|-
|Everett Wilson
|Ed Bennett
|
|-
|Derek Bever
|Ed Bennett
|
|-
|Jay Hopkins
|Ed Bennett
|
|-
|James Porter
|Ed Bennett
|
|-
|Eric Stein
|Tucker Tomlnson
|
|-
|Todd Allen
|Ed Bennett
|
|-
|Mac MacDevitt
|Ed Bennett
|
|-
|[[User:scyg|Simon Cygielski]]
|Ed Bennett
|
|-
|Robb Rigs
|Ed Bennett
|
|-
|Arturo Duarte
|Ed Bennett
|
|-
|Michael Skilton
|Tucker Tomlinson
|
|-
|[[User:Justin|Justin T. Conroy]]
|Ed Bennett
|
|-
|[[User:davidfell|David Fell]]
|Ed Bennett
|
|-
|[[User:rdoeksen|Ray Doeksen]]
|Ed Bennett
|
|-
|Ryan Pierce
|Ed Bennett
|
|-
|Elizabeth Koprucki
|Ed Bennett
|
|-
|Casey Olson
|Ed Bennett
|
|-
|Ron Olson
|Ed Bennett
|
|-
|Thomas Wright
|Ed Bennett
|
|-
|Tom Judge
|Tucker Tomlinson
|
|-
|Edward Muela
|Anna Yu
|5/13/14
|-
|Samuel Swope
|Anna Yu
|5/13/14
|-
|Chris Agocs
|Anna Yu
|6/3/14
|-
|Justine Miles
|Anna Yu
|6/3/14
|-
|Robert Grossman
|Ed Bennett
|
|-
|Tom Forajter
|Thomas Wright
|
|-
|[[User:ahbaker|Alan Baker]]
|Tucker Tomlinson
|
|-
|Jeff McBride
|Ed Bennett
|10/9/14
|-
|Mike Kislovsky
|Ed Bennett
|10/9/14
|-
|Arjun Wadnerkar
|Ed Bennett
|10/9/14
|-
|Oscar Villareal
|Ed Bennett
|10/9/14
|-
|TomF (? 7-17)
|Thomas Wright
|
|-
|Rich Smith
|Thomas Wright
|
|-
|George Shaw
|Thomas Wright
|
|-
|Ron Bean
|Ed Bennett
|
|-
|John Butera
|Ed Bennett
|10/18/14
|-
|Alex Schaffer
|Ed Bennett
|10/18/14
|-
|Daniel Loeser
|Ed Bennett
|10/18/14
|-
|Jonathan Bisson
|Ed Bennett
|10/18/14
|-
|Kyle Bieneman
|Todd Allen
|11/09/14
|-
|Scott Little
|Todd Allen
|11/09/14
|-
|RJ Metzger
|Todd Allen
|11/09/14
|-
|Giovanni Arroyo
|Todd Allen
|11/09/14
|-
|Joao Santos
|Todd Allen
|11/26/14
|-
|Nicholas Haldereman
|Todd Allen
|11/26/14
|-
|Doorman Dave
|Todd Allen
|11/26/14
|-
|Stephen Ioannou
|Todd Allen
|11/26/14
|-
|Lucas Goossen
|Todd Allen
|12/10/14
|-
|[[user:RogerMoore|Roger Moore]]
|Todd Allen
|12/10/14
|-
|[[User:Mwilkens|Matt Wilkens]]
|Todd Allen
|12/10/14
|-
|Rhonda Jackson
|Todd Allen
|12/10/14
|-
|Matt Meshulam
|Todd Allen
|12/21/14
|-
|Kevin Pulver
|Todd Allen
|12/21/14
|-
|Andrew Camardella
|Todd Allen
|12/21/14
|-
|Mike Coriale
|Todd Allen
|12/21/14
|-
|Nick Naro
|Todd Allen
|1/11/15
|-
|John Farmer
|Todd Allen
|1/11/15
|-
|[[user:Jaypee|Jay Pee]]
|Todd Allen
|1/11/15
|-
|Sam Paris
|Todd Allen
|1/21/2015
|-
|Jake Rush
|Todd Allen
|1/21/2015
|-
|Carolyn Ignacio
|Todd Allen
|1/21/2015
|-
|Andrew Sowa
|Todd Allen
|1/21/2015
|-
|Hilary Lee
|Todd Allen
|1/21/2015
|-
|Eric Slehofer
|Todd Allen
|1/28/2015
|-
|Sam Reicks
|Todd Allen
|1/28/2015
|-
|Tyler Matthew
|Todd Allen
|1/28/2015
|-
|Ben Bogler
|Todd Allen
|1/28/2015
|-
|Brittany Krawczyk
|Todd Allen
|1/28/2015
|-
|Cary Lahucik
|Todd Allen
|1/28/2015
|-
|Eric Yu
|Todd Allen
|2/8/2015
|-
|Davis Mazariegos
|Todd Allen
|2/8/2015
|-
|Dan Baltudis
|Todd Allen
|2/8/2015
|-
|Shae Kurko
|Todd Allen
|2/25/2015
|-
|Curtiss Cooke
|Todd Allen
|02/08/15
|-
|Ryan Taylor
|Everett Wilson
|03/04/15
|-
|Joe Wallace
|Todd Allen
|03/08/15
|-
|Josh Myers
|Todd Allen
|03/08/15
|-
|[[User:glenn|Glenn Powers]]
|Todd Allen
|03/08/15
|-
|Daniel Sojka
|Todd Allen
|03/25/2015
|-
|Michael Patton
|Todd Allen
|03/25/2015
|-
|Kevin M Sampson
|Todd Allen
|07/22/2015
|-
|Steve Farkas
|Everett Wilson

|-
|Josh Cooper
|Todd Allen
|09/30/2015
|-
|Sheila Miguez
|Everett Wilson
|2015/12/29
|-
|Zonghe Chua
|Michael Patton
|1/10/16
|-
|Brandon Love
|Michael Patton
|1/27/16
|-
|John McDonald
|Michael Patton
|3/6/16
|-
|Zachery Small
|Michael Patton
|5/1/16
|-
|Josh Younger
|Michael Patton
|5/7/16
|-
|Andy Muhic
|Michael Patton
|5/7/16
|-
|Spencer Simms
|Michael Patton
|5/26/16
|-
|Noah Lambert
|Michael Patton
|6/15/16
|-
|Ian Monroe
|Michael Patton
|6/29/16
|-
|Joe Iklov
|Michael Patton
|6/29/16
|-
|Jim Brink
|Michael Patton
|6/29/16
|-
|[[user:mct|McTavish McArdle]]
|Michael Patton
|2016-07-10
|-
|Patrick Bowling
|Michael Patton
|8/14/16
|-
|Ashley Matrisciano
|Michael Patton
|8/14/16
|-
|Juan Ramos
|Michael Patton
|8/14/16
|-
|Leo Rodman
|Dean?
|9/14/16
|-
|Dan Conrad
|Michael Patton
|10/05/16
|-
|Aaron Mintz
|Michael Patton
|10/20/16
|-
|Brian Carstensen
|Michael Patton
|10/20/16
|-
|Chris Ruhland
|Michael Patton
|11/7/16
|-
|Simon Pyle
|Michael Patton
|12/5/16
|-
|Josip Fijacko
|Michael Patton
|12/5/16
|-
|Adam Stein
|Michael Patton
|1/14/17
|-
|Paul McClay
|Chris Ruhland
|3/23/17
|-
|Ed Breuer
|Chris Ruhland
|04/09/2017
|-
|Haddon Pearson
|Chris Ruhland
|4/29/17
|-
|Andrew Wingate
|Todd Allen
|7/17/17
|-
|Stephen Foulkes
|[[user:mct|McTavish McArdle]]
|10/16/17
|-
|Charles Harmata
|[[user:mct|McTavish McArdle]]
|2017-10-23
|-
|Matthew DePree
|[[user:mct|McTavish McArdle]]
|2017-10-31
|-
|Szymon Mirek
|[[user:mct|McTavish McArdle]]
|2017-10-31
|-
|Arjun Sharma
|[[user:mct|McTavish McArdle]]
|2017-10-31
|-
|[[user:GalaxyCascade|Steve Griegoliet]]
|Sam ?
|2017-12-13
|-
|Jeff Gershune
|Sam
|2018-1-24
|-
|Matthew Maggio
|[[user:mct|McTavish McArdle]]
|2018-04-03
|-
|Wayne Hendryx
|[[user:mct|McTavish McArdle]]
|2018-04-09
|-
|Alisha Ciardi
|Jim Brink
|2018/05/08
|-
|David Earl
|Abel Greenwald
|2018/05/08
|-
|Sam Wallinga
|Sam
|2018/05/30
|-
|Maciej Warchalowski
|Sam Olendorf
|2018/06/13
|-
|Earl Wood
|Sam Olendorf
|6/13/2018
|-
|Dave Solomon
|Sam Olendorf
|7/11/2018
|-
|Ryan Treacy
|Sam Olendorf
|9/19/2018
|-
| Jacob Dawson
| Sam Olendorf
| 9/19/2018
|-
|Ben Dibuz
|[[user:mct|McTavish McArdle]]
|11/1/2018
|-
|Marcos Ruiz
|[[user:mct|McTavish McArdle]]
|2018-11-07
|-
|Jim Lund
|[[user:mct|McTavish McArdle]]
|2018-11-13
|}