PS:1 Wiki Dev - User contributions [en]

Jet Wood Lathe

2018-10-29T14:24:17Z

Michaeldonovan: /* List of Authorized Users */

{{Template:EquipmentPage
|image =
|owner = PS1
|serial = NAN
|certification = yes
|hackable = no
|model = Jet 1442 headstock, and 1642 bed (probably)
|arrived = 11/21/2015
|doesitwork = yes
|contact = Wood Shop Area Host
|where = Wood Shop
|value = 800
|itemphoto =
|hostarea = Wood Shop
}}

== Description ==
This is an oddball lathe that seems to be assembled from a collection of parts from other lathes.
*The bed and legs are from a No:1642 16" electronic variable speed lathe.
**There was a dataplate on the legs to this effect, but ALL the information on it was wrong (swing, working length, speed control type, etc.) for our lathe configuration, so it was removed
*The headstock and tailstock are (we think) from a 1442 MECHANICAL variable speed lathe
** manual here: [[file:Jet_1442_lathe.pdf]]
*The tool rest is fairly large for the headstock height and ~probably~ originated with the 16" lathe parts

== Status ==

It spins, it works, and serviceable tailstock and headstock parts are on hand. Don't change the speed - the speed-change mechanism is broken and also jammed in place.

== How To Get Authorized ==
Authorization for this tool by authorized proctors only: Authorized Proctors

We try to say "authorized" now at PS:1 instead of "certified" because we aren't saying you're an expert after authorization, just briefed ... There is a list of authorized proctors (trainers) right here. You can't become authorized from just any other member who knows how to use this tool, it's a dangerous piece of equipment and we're keeping the authorization process a little more formal because of that. Ask the area host for the wood shop, any volunteer authorizers for wood shop, or the people listed as authorized proctors about authorization.

'''This tool requires certification for use. Please contact one of the following to arrange authorization.'''
* This list is a basic starting point pending approval of the area host.

{| class="wikitable" border="1"
! Approved Authorizer
! Contact
|-
|Matt Triano
|matt.triano @ gmail.com
|-
|Eric Beauchamp — area host
|eric @ home-chicago.com
|-
|Sevin Strauss — approved authorizer
|
|-
|Andrew Camardella — approved authorizer
|
|-
|Donzell — approved authorizer
|-
|}

== Resources ==

[https://wiki.pumpingstationone.org/Wood_Lathe_Authorization_Checklist Wood Lathe Authorization Checklist]

[https://wiki.pumpingstationone.org/File:Introwt.pdf Intro to Woodturning by Brian Clifford]

[https://www.reddit.com/r/turning/wiki/index Woodturning Reddit Wiki]

== Personal Protective Equipment ==

* Face shield (not just safety glasses) must be worn.
* Long and loose hair must be contained.
* Do not wear gloves or loose clothing.
* Remove watches, rings, and other jewelry.
* Roll up or don't wear long sleeves.
* Dust protection may be required.

== Pre-Operational Safety Checks ==
* Locate and ensure you are familiar with all machine operations and controls.
* Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty.
* Workpiece must be securely fastened to face plate, chuck or between centers.
* Rotate the workpiece by hand to check clearance between tool rest and bed.
* Ensure the cutting tools are sharp and in good condition.
* Start the dust extraction unit before using the machine.
* Make sure all clamping handles are tight.

== Operational Safety Checks ==
* Adjust speed to suit the diameter of the work and turning operation (IMPORTANT - *never* adjust speed while the lathe is off!)
* Before making adjustments (apart from speed), switch off and bring the machine to a complete standstill.
* Keep the tool rest adjusted close to the work and at the correct height.
* Stop the lathe and remove all tool rests before sanding.

== Ending Operations and Cleaning Up ==
* Switch off the machine when work completed.
* Return all chisels and other tools to racks.
* Leave the machine in a safe, clean and tidy state.
* Sweep or vacuum any wood debris/dust/shavings.

== Potential Hazards and Injuries ==
* Please watch this short safety video on YouTube [https://www.youtube.com/watch?v=7yhkeUP6Mf8]
* Eye injuries from flying debris or defective timber. Wear appropriate eye protection.
* Hair/clothing getting caught in moving machine parts. Remove jewelry, loose clothes, keep sleeves short, roll up sleeves, no gloves, secure long hair
* Airborne dust. Wear a respirator or dust mask appropriate for the material you are using.
* Smacked or cut/impaled by a gouge. If you don't maintain a good stance and a good grip, a tool can go flying.
* Wood shrapnel. Occasionally, the workpiece can explode. A face shield, an apron, and working slowly with sharp tools can help avoid this hazard.

== Do ==
* Rough cut the workpiece as close as possible to the finished shape before installing it.
* Check your workpiece for flaws, cracks, knots etc. and test glue joints before mounting the workpiece on machine.
* Use the lowest speed when starting a new workpiece.

== Don't ==
* Drive the workpiece into the drive center while the drive center is in the headstock.
* Touch your project by hand while the lathe is running

== DO ==
* Set the drive center into the workpiece with a soft mallet prior to installing it on the headstock.

== Documentation ==
https://wiki.pumpingstationone.org/Wood_Lathe_Authorization_Checklist

Manual https://wiki.pumpingstationone.org/File:Jet_1236.pdf

[[File:Oneway Chuck Manual.pdf]]

Short, basic safety video: https://www.youtube.com/watch?v=GV0dmf2mBMc

== List of Authorized Users ==
{| class="wikitable" border="1"
! Authorized User
! Trained By
! Auth Date
|-
|Matt Triano
|Patrick Grider
|-
|Sevin Straus
|Danger Committee
|-
|Eric Beauchamp
|Danger Committee
|-
|Erik Wessing
|Danger Committee
|-
|Andrew Camardella
|Danger Committee
|-
|Ray Doeksen
|Danger Committee, Sevin Strauss
|-
|Michael Skilton
|Danger Committee
|-
|Daron Wooding
|Andrew Camardella
|-
|Sam Paris
|Andrew Camardella
|2016-07-20
|-
|Donald Wells
|Andrew Camardella
|2016-07-20
|-
|[[user:mct|McTavish McArdle]]
|Andrew Camardella
|2016-07-20
|-
|[[user:goatking|An Phan]]
|Andrew Camardella
|2016-08-18
|-
|[[user:mkeith|Matt Keith]]
|Andrew Camardella
|2016-08-18
|-
|Ian Monroe
|Andrew Camardella
|2016-07-20
|-
|Les Schier
|Sevin Straus
|2016-09-01
|-
|Jon Komperda
|Andy Larkin
|2016-10-27
|-
|Clarence Bartenhagen
|Sevin Straus
|2017-02-01
|-
|Joe Dowling
|Sevin Straus
|2017-02-01
|-
|Crystal Morales
|Sevin Straus
|2017-03-11
|-
|Jason Pittman
|Sevin Straus
|2017-03-11
|-
|Sam Chen
|Sevin Straus
|-
|Andrew Wingate
|Donzell
|2017-10-22
|-
|Tucker Tomlinson
|Donzell
|2017-10-22
|-
|Theo
|Donzell
|2017-12-10
|-
|Jeff Gershune
|Donzell
|2018-1-14
|-
|Arjun Sharma
|Donzell
|2018-1-14
|-
|Jack Phillips
|Donzell
|2018-1-14
|-
|Ryan Himmelblau
|Donzell
|2018-1-14
|-
|Scott Greenburg
|Donzell
|2018-1-14
|-
|Zack Sasnow
|Donzell
|2018-1-28
|-
|Corey Toyama
|Donzell
|2018-1-28
|-
|Nick Prorok
|Donzell
|2018-3-11
|-
|Eugene Liokumovich
|Donzell
|2018-8-26
|-
|Michael Donovan
|Donzell
|2018-10-28
|}

[[Category:Wood Shop]]
[[Category:Loaned Equipment]]
[[Category:Shop Equipment]]

Shopbot PRS CNC router

2018-03-27T18:16:37Z

Michaeldonovan:

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = yes
|hackable = no
|model = Shopbot PRS #10108 96-48
|arrived = 2014
|image = Shopbot.jpg
|doesitwork = yes
|contact = [[CNC|CNC Area Host]]
|where = TBD
|value = $16000
|hostarea = CNC
}}
= ShopBot PRS #10108 96-48 =

* [http://www.shopbottools.com/mProducts/prSstandard.htm OEM website and specs]
* Nominal Cutting Area 96"x 48"x 6" (2.44m x 1.22m x .15m)
* Total Movement Area 102" x 50" x 8" (2.59m x 1.27m x .20m)

The spindle uses ER25 collets. These eventually wear out, so check before using them. Collets are a durable expendable.

Some people buy their own collets. There are a number of suppliers of collets, nuts, and related accessories. [http://www.techniksusa.com/ Techniks] and [http://www.shars.com/ Shars] are both brands that have been recommended by experienced CNC users, although other brands may also be of equivalent price and quality:

* [http://www.shars.com/1-4-ultra-precision-5-micron-er25-collet Shars ER25 Collet Ultra Precision 5 Micron]
* [https://www.ebay.com/itm/TECHNIKS-1-4-SUPER-PRECISION-ER25-COLLET-0002-ACCURACY-CNC-CHUCK-MILL-/130701349603?hash=item1e6e6852e3 Techniks 1/4" Super Precision ER25 Collet .0002 Accuracy]
* [https://www.toolstoday.com/cnc-high-precision-spring-collets-for-er25-tool-holder.html?variantids=11644,0&keywords=CO-286 Amana CNC High Precision Spring Collets for ER25 Tool Holder]
* [https://www.amazon.com/HHIP-3900-5215-ER-25-Spring-Collet/dp/B01ABWS9IG/ HHIP 3900-5215 ER-25 Spring Collet, 1/4"]
* [https://www.amazon.com/Dorian-Tool-Alloy-Precision-Collet/dp/B00CB14HXW/ Dorian Tool ER25 Alloy Steel Ultra Precision Collet, 0.236" - 0.276" Hole Size]

=Status history=
August 2017: Dust collection system out of commission.

June 2017: There is an intermittent break in the wiring for the Z-axis Zero Plate. Check for continuity before using (the #1 input should light up on screen when you touch the contacts together). It usually works near the front of the table, but not halfway back. This will get fixed eventually, but it's a good idea to be in the habit of checking.

12/27/16 - Fixed Shopbot x-axis homing. The cable had been pulled on hard enough that some of the conductors broke inside the cable. It has been spliced, soldered, and heatshrinked back together.

= How to Get Authorized =

'''Authorization for this tool by authorized proctors only.''' This means you cannot get authorized by just anyone who is already authorized. You can only get authorized by a few people, the proctors listed below.

Authorization sessions are scheduled roughly monthly. Check the [https://www.meetup.com/Pumping-Station-One/events/ Meetup calendar] for upcoming authorizations. If no ShopBot sessions are currently scheduled, ask on the [https://groups.google.com/group/pumping-station-one/ Google Group].

Be aware that this authorization consists of two parts; the first session is a classroom session that will cover the software required and introduce you to the essential settings and chip-load calculation, and the second part, scheduled separately, is a hands-on class.

== Authorized Proctors ==
{| class="wikitable" border="1"
|-
|Elizabeth Koprucki
|Danger Committee
|-
|Bart Dring
|Danger Committee
|-
|Ryan Pierce
|Danger Committee
|-
|Nathan Ellis
|Danger Committee
|-
|Michael Skilton
|Danger Committee
|-
|Khoi Nguyen
|Michael Skilton
|-
|Andrew Camardella
|Elizabeth Koprucki
|-
|Matt Meshulam
|Andrew Camardella
|-
|David Earl
|Matt Meshulam
|-
|}

== How to Become an Authorized Proctor ==
Get an ok from the area host. Successfully run an authorization supervised by an authorized proctor.
It's recommended that initial authorizations be limited to 2 or less.

= Documentation =

[[File:Shopbotassembly.pdf|Shopbotassembly.pdf]]

[[File:Squaringshopbot.pdf|Squaring the ShopBot]]

[[File:Programming_handbook.pdf|Programming Handbook]]

[[File:PRS Maintenance Schedule.pdf|Maintenance Schedule]]

[[File:ShopBot_USB_Connection_Troubleshoot.pdf]] - USB Troubleshooting Guide

[[File:ShopBot_Tech_Support_FAQ_2016_09_12.pdf]] - Tech Support FAQ

[[File:SBG00142 User Guide 2013 05 01.pdf|SBG00142 User Guide 2013 05 01.pdf]] - User Guide

[[File:B17P.763_Schematic.pdf]] - Omer Nail Gun Documentation

[http://www.shopbottools.com/ShopBotDocs/files/quick%20start%20guide%202013%2007%2023.pdf QuickStart]

X, Y, Z probe: https://pumpingstationone.org/2015/09/xyz-finder-for-the-shopbot/

[http://drshopbot.com/index.php?title=Main_Page "Dr Shopbot" wiki]

[http://drshopbot.com/index.php?title=MaintainingConnection "Maintaining Connections"]

[[File:Shopbotmagnets.ai.zip]] - Template for the dust skirt and magnet placement.

== Tutorials ==
[https://www.youtube.com/watch?v=xWCZfYHOYWw Part 1 of our Shopbot Authorization] - This is available as a refresher only. You still need to go to the class when it happens to get access to the hands-on Part 2.

[http://www.woodguide.org/files/2014/07/CNCrouter_bit_basics.pdf Router Bit Basics for CNC - VERY USEFUL]

[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Threads on Member List]

[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Forum]

[https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ Overview of Cut Load calcualtions for setting bit feed and speed rates]

= Software Tool Chain =
*Illustrator
*Inkscape
*Vectric Aspire
**Allows for 2D and 3D linework and toolpath creation
**Only available on the Shapeoko Computer
*Vectric V-Carve Makerspace Edition
** http://www.vectric.com/products/vcarve/trial.html
**Allows for 2D linework and toolpath creation
**Allows at home use of V-Carve - output only at PS1
**Our Makerspace Code is: E4793-F6472-BB9E5-9B114-3FEEB-73649-16F4F
*Autodesk Fusion 360
**The ShopBot computer does not have this and may not be fast enough to run it.
**You '''MUST''' use the custom post-processor below. Otherwise, you will bypass the safety check to make sure the spindle really is running!
**For local '''Windows''', to install this on your local computer:
***Unzip and install this in C:\Users\YourName\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts
***Note that AppData is often a hidden folder!
***Inside Fusion 360, when you select Actions / Post Process, under Configuration Folder, hit Setup and select Use Personal Posts.
**For local '''Mac'''
*** Unzip and install in Macintosh HD> Users> USERNAME> Autodesk> Fusion 360 CAM> Posts
*** In Fusion 360, when you select Actions > Post Process, under Settings select Personal Posts for the Source
**For '''Cloud'''
*** Open Fusion 360 and navigate to Libraries > Assets in the Data Panel.
*** Double click the Assets > CAMPosts folder to enter it.
*** Use the Upload button to upload the desired post processor from your local machine to the Assets > CAMPosts folder. This will upload the post to the cloud and allow you to access it anywhere you may login to your Fusion 360 account through My Cloud Posts.
*** After enabling cloud libraries in Fusion 360, you will be able to access your cloud post processor library by setting the Configuration Folder (Windows) or Source (Mac) to My Cloud Posts. Both of these dialog boxes are shown below. You will then be able to select the Cloud post you uploaded in the Post Configuration field (Windows) or the Post Processor field (Mac).
====Chip Load Calculation====
*[http://www.pdsspindles.com/engineering-speeds Bit Parameter Overview by PDS Spindles]
*[http://www.monstertool.com/monster_tool_calculators.html Monster Tools Chip Load Calculator]
*[http://www.pdsspindles.com/admin/modules/page_editor/uploads/image/Chip%20load%20for%20common%20tool%20diameters%20(Inches).jpg Chip Load Chart by PDS Spindles]
*[https://groups.google.com/forum/#!searchin/pumping-station-one/makerspace$20edition/pumping-station-one/cTwfUHxESjU/7m_lI8UWCgAJ How to install Makerspace Version]

== User Tips & Troubleshooting Reports ==
[http://www.sgstool.com/PDF-speedfeeds/SGS-Speeds-Feeds-GP.pdf Some feed and speed recommendations for small bits]

Add your experiences with feeds and speeds or other tips here:
[[Shopbot_User_Tips]]

Add troubleshooting reports here:
[[Shopbot_Troubleshooting_Reports]]

=== Materials ===

* [[Shopbot_PRS_CNC_router/Aluminium|Aluminium]]
* [[Shopbot_PRS_CNC_router/Brass|Brass]]
* [[Shopbot_PRS_CNC_router/Wood|Wood]]

== Authorization Checklist ==

This is here as a checklist for proctors to follow when authorizing people. It can also help remind you of things after you are authorized. Just reading this does not authorizing you.

* How to get authorized
** Watch [http://www.meetup.com/Pumping-Station-One/ the meetup group] for a recurring class on the second Thursday and last Sunday of the month. Sometimes check [https://groups.google.com/forum/#!forum/pumping-station-one the forum] for announcements or ask on the forum if no announcements have been made for a few weeks.

* Authorization group size
** There is no cap to the software instruction preceding the machine usage portion of the class. If you come to this portion it is easier to get fully authorized at a later date.
** 3 machine users - each person will run a job (~1/2 hr each) and everyone will assist each other in completing a job profile and pocket cut. You must be present for the entire authorization

* Safety
** Safety Glasses
** Hearing Protection
** Dust Protection

* What can go wrong (and what to do)

* How does machine work
** Axes
** Motors
** Spindle

* Daily Maintenance
** Spindle bearing warm up.
*** The "C5" warm up routine should be run on the first job of the day. It runs the spindle at 3 speeds for 3 minutes each to warm up the bearings. (When it doubt, warm it up)

* Extended Maintenance
** See maintenance schedule file under documentation.
** Grease the racks
** Use Grease type: Manual states any type is safe there is some in the draw

* Machine Control
** Turn on sequence
*** Log into computer
*** Turn on Shopbot big red and yellow twist switch (see zeroing below)
*** Insert Key and turn to "engaged" position.
*** The VDF should light up, the spindle fan should be on.
*** Start "Shopbot 3" program.
*** Open Tools...Spindle RPM Control menu (to allow RPM control)
**** Make sure collet is tightened or no tool or nut is installed
**** Run the C5 warm up routine
** Jogging
*** Keypad
*** Arrow Keys + Page Up, Page Down (ctrl for fast jog)

* CAM Software
** Vectric V Carve
** Just the basics...separate class for advanced V Carve.
** Online videos

* Running your Job
** Zeroing X & Y
*** With machine off slow push gantry towards X0 until it hits hard stops (optional)
*** Turn on big red switch while still holding gantry.
*** Jog machine away from X0 Y0 so machine will find switches
*** Click X, Y zero button.
** Zeroing Z (top of work piece)
*** Jog over your work piece
*** Place Z zero plate on work piece under the bit
*** Place clip on bit
*** Test connection by touching plate to bit and watch for light #1 to light
*** Click the Z 0 button (it will touch off twice!!!)
*** If Z is critical, you may want to verify that your bit has been zeroed properly by using a "MZ,0" command over the surface you have zeroed the bit to. Repeat zeroing if not correct.

* Waste Board and clamping

* Collets, Bits, Feeds and Speeds
** Feeds and Speeds
*** Use a Cut Load Calculator to determine which feeds and speeds you should be using for your specific bits. An overview is avaialble at: [https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ]
** Collets
*** We currently have collets for 1/2, 1/4, 3/16 and 1/8" shank bits.
*** Try to keep them clean and store them away from dust between uses. Dust between the gaps will produce runout. The drawer mounted under the Shopbot is the right place to store these items.
*** If the collet nuts are not threading smoothly try cleaning the threads with a small brush, spindle threads as well.
** Bits
*** Use bits designed for the material you are cutting. Don't just steal a bits from the Bridgeport. They won't do a good job and will probably overheat.
*** For cutting out things, use the smallest appropriate bit. Using a 1/2" bit to cutout will just create a lot of mess.

* ShopBot should not be used for...
** Metals other than aluminum
** Cutting anything that requires coolant or lubricant (it will ruin the waste board)
** Ripping lumber (use the table saw)
** Thickness Planning (Use the planner if you can)
** Drilling holes with drill bits (a small end mill works better)

* How to leave the machine (be excellent)
** Machine
*** Home the machine to X0, Y0
*** Turn off both switches
*** Remove Key
*** Remove bit and collet.
*** Place both collet wrenches on top of electronics box
*** clean up work area
*** Smooth out waste board if you puckered it at all.
*** Check if the dust collector needs to be emptied

** Post a picture on our [[Blog]] please!

== Use checklist ==

PS1 is experimenting with the use of checklists to encourage the safe use and proper care of tools in the workspace. The latest version of the [[checklists]] for this tool is stored as a [https://docs.google.com/document/d/1L78Rr_T8vhV8XZLRReKIWYXAyOnS8CLfJmAxehVeThU/edit Google Doc] that can be edited by anyone. If you make changes, update the effective date at the bottom of the document. Print a new copy, and replace the old one.

Physical checklists are necessarily constrained in length. Following is a more extensive pre-flight checklist:

* Did you home the machine?
* Is the dust collect gate open?
* Are you sure you have the right X, Y orientation for your file and material?
* Did you set the proper X,Y zero for your work piece on the Shopbot.
* Is the correct bit installed and tight?
* Is the key in and turned on?
* Is the dust skirt set right so it does not get smashed.
* Is Z zero set to the work top?
* Are the touch plate and clip returned?
* Is the material properly secured?
* Open the Shopbot spindle control dialog (Tools > Spindle RPM Control)
* Safety glasses, hearing protection on.
* Start the job with the E-Stop ready to hit.
* Turn on dust collector ( I like to wait so I can hear that things sound right on the shopbot before turning on the collector)

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Elizabeth Koprucki
|Danger Committee
|
|-
|Bart Dring
|Danger Committee
|
|-
|Ryan Pierce
|Danger Committee
|
|-
|Nathan Ellis
|Danger Committee
|
|-
|Michael Skilton
|Danger Committee
|
|-
|Arturo Duarte
|Bart
|
|-
|Derek Bever
|Bart
|
|-
|Everett
|Bart
|
|-
|Vincent Colombo
|Bart
|
|-
|[[User:justin|Justin T. Conroy]]
|Bart
|
|-
|Hugh Sato
|Bart
|
|-
|Sergey Nekrasov
|Bart
|
|-
|Valerie Moore
|Bart
|
|-
|Patrick Schless
|Bart
|
|-
|Tom Forajter
|Bart
|
|-
|Todd Allen
|Michael Skilton
|
|-
|[[User:RogerMoore|Roger Moore]]
|Bart
|
|-
|Tim Saylor
|Bart
|
|-
|Hef
|Bart
|
|-
|Jeff McBride
|Bart
|
|-
| Maxwell ?
| Michael Skilton
|
|-
|Samuel Swope
|Michael Skilton
|
|-
| Khoi Nguyen
|Michael Skilton
|
|-
|Brian Chojnowski
|Michael Skilton
|
|-
|Josh Cooper
|Bart
|
|-
|Andrew Camardella
|Bart
|
|-
|Adam Glick
|Bart
|
|-
|Yehuda Braun
|Bart
|
|-
| Jeff Kantarek
| Michael Sklton
|
|-
| Justin Miles
|Michael Skilton
|
|-
|Will Garza
|Michael Skilton
|
|-
|Clarence Risher
|Michael Skilton
|
|-
|[[User:ericbeau|Eric Beauchamp]]
|Michael Skilton
|
|-
|[[User:Jason|Jason]]
|Michael Skilton
|
|-
|Eric Stein
|Bart
|
|-
|Colin Parsons
|Bart
|
|-
|David Ditzler
|Bart
|
|-
|Ray Doeksen
|Bart Dring
|
|-
|Ron Bean
|Khoi Nguyen & Michael Skilton
|
|-
| Thomas Wright
|Khoi Nguyen & Michael Skilton
|
|-
|David Morton
|Bart Dring
|
|-
|Ron Olson
|Bart Dring
|
|-
|Kyle Bieneman
|Bart Dring
|
|-
|[[User:amishhammer|Tom Judge]]
|Michael Skilton
|
|-
|Bryan Gleason
|Michael Skilton
|
|-
|Dave Schact
|Ryan Pierce
|
|-
|Chris Agocs
|Andrew Camardella
|
|-
|[[user:kuroishi | Doorman Dave ]]
|Andrew Camardella
|
|-
|Alec Weege
|Andrew Camardella
|
|-
|Sam Reicks
|Andrew Camardella
|
|-
|Touly Phiachantharath
|Andrew Camardella
|
|-
|Lucas Goossen
|Andrew Camardella
|
|-
|[[user:Tina|Tina C]]
|Andrew Camardella
|
|-
|Ryan Neuman
|Andrew Camardella
|
|-
|Dan Loeser
|Andrew Camardella
|
|-
|Ben Bogler
|Andrew Camardella
|
|-
|Erin Banwell
|Ryan Pierce
|
|-
|Brad Rios
|Ryan Pierce
|
|-
|Aaron Carlock
|Andrew Camardella
|
|-
|James Villalpando
|Andrew Camardella
|
|-
|Connor Jansen
|Andrew Camardella
|
|-
|Tait Leswing
|Bart
|
|-
|Raj Perera
|Khoi Nguyen
|
|-
|Keith Hultman
|Andrew Camardella
|
|-
|David Srebro
|Andrew Camardella
|
|-
|[[user:Wessing | Erik Wessing ]]
|Andrew Camardella
|
|-
|Leeswann Bolden
|Andrew Camardella
|
|-
|Josh Myers
|Andrew Camardella
|
|-
|Kurt Ziegel
|Andrew Camardella
|
|-
|Glenn Powers
|Andrew Camardella
|
|-
|[[User:mqudsi|Mahmoud Al-Qudsi]]
|Andrew Camardella
|
|-
|Casey Olson
|Khoi
|
|-
|Mike Jones
|Andrew Camardella
|
|-
|Aaron Feigen
|Andrew Camardella
|
|-
|Jim Baker
|Andrew Camardella
|
|-
|Eric Reusche
|Khoi Nguyen
|
|-
|Ralph Brendler
|Andrew Camardella
|
|-
|John McDonald
|Andrew Camardella
|
|-
|Alex Al-Hamdan
|Andrew Camardella
|
|-
|Eugene Liokumovich
|Andrew Camardella
|
|-
|Randal Cox
|Andrew Camardella
|
|-
|Simon Pyle
|Andrew Camardella
|
|-
|Jean Michel Crettaz
|Andrew Camardella
|
|-
|Brian Zable
|Andrew Camardella
|
|-
|Daylan Dufelmeier
|Andrew Camardella
|
|-
|Steve Kruse
|Matt Meshulam
|
|-
|Mike Mandrea
|Andrew Camardella
|
|-
|Jeff Zelnio
|Andrew Camardella
|
|-
|Aaron Stoddart
|Matt Meshulam
|
|-
|Koun Park
|Matt Meshulam
|
|-
|Dan Baltudis
|Matt Meshulam
|
|-
|Curtiss Cooke
|Matt Meshulam
|
|-
|Jeannine Chuchan
|Matt Meshulam
|
|-
|Brennan Koziarz
|Matt Meshulam
|
|-
|Brandon Love
|Matt Meshulam
|
|-
|Mike Vitale
|Matt Meshulam
|
|-
|Emma Purola
|Matt Meshulam
|
|-
|Chris Kohl
|Matt Meshulam
|
|-
|Daniel Sojka
|Matt Meshulam
|
|-
|Naguib Azab
|Matt Meshulam
|
|-
|Mark Zumwalt
|Matt Meshulam
|
|-
|Joseph Juhnke
|Andrew Camardella
|
|-
|Alex Berkowitz
|Andrew Camardella
|
|-
|Andy Muhic
|Matt Meshulam
|
|-
|Adam Stein
|Matt Meshulam
|
|-
|John Farmer
|Matt Meshulam
|
|-
|Joshua Havenga
|Matt Meshulam
|
|-
|[[user:mct|McTavish McArdle]]
|Matt Meshulam
|
|-
|Frank Bowles
|Matt Meshulam
|
|-
|Joe Iklov
|Matt Meshulam
|
|-
|Matthew Quigley
|Matt Meshulam
|
|-
|Derwin Umali
|Andrew Camardella
|
|-
|Doug Mahoney
|Matt Meshulam
|
|-
|Rob Robinson
|Matt Meshulam
|
|-
|Dan Sloboda
|Matt Meshulam
|
|-
|Jacob Collins
|Matt Meshulam
|
|-
|Donald Wells
|Matt Meshulam
|
|-
|[[user:jim|Jim Brink]]
|Matt Meshulam
|
|-
|[[user:mkeith|Matt Keith]]
|Matt Meshulam
|
|-
|[[user:vmorris|Victoria Morris]]
|Matt Meshulam
|
|-
|[[user:bobsabayesian|Bob Loos]]
|Matt Meshulam
|
|-
|[[user:muthpete|Peter Muth]]
|Matt Meshulam
|
|-
|[[user:guijemont|Guillaume Emont]]
|Matt Meshulam
|
|-
|[[user:erikthefunk|Erik Funkhouser]]
|Matt Meshulam
|
|-
|[[user:mrashes|Max Rashes]]
|Matt Meshulam
|
|-
|[[user:panchan99|Juan Ramos]]
|Matt Meshulam
|
|-
|[[user:Justjoe|Joe Dowling]]
|Matt Meshulam
|
|-
|[[user:smash|Ashley Matrisciano]]
|Matt Meshulam
|
|-
|Ryan Kapp
|Matt Meshulam
|
|-
|Idris Raja
|Matt Meshulam
|
|-
|[[user:Dannyblanchard|Danny Blanchard]]
|Matt Meshulam
|
|-
|Aaron Mintz
|Matt Meshulam
|
|-
|[[user:ianstubbs|Ian Stubbs]]
|Matt Meshulam
|
|-
|[[user:skynaya|Skylar Nova]]
|Matt Meshulam
|
|-
|Chris Ruhland
|Matt Meshulam
|
|-
|[[user:Jaypee|Jay Pee]]
|Matt Meshulam
|
|-
|[[user:Ryanmafi|Ryan Fiebing]]
|Matt Meshulam
|
|-
|[[user:sblaszak|Shawn Blaszak]]
|Matt Meshulam
|
|-
|[[user:tonyiacullo|Tony Iacullo]]
|Matt Meshulam
|
|-
|Mark Haughey
|Matt Meshulam
|
|-
|Chris Iacullo
|Matt Meshulam
|
|-
|Ian Monroe
|Matt Meshulam
|
|-
|Ashish Jasani
|Matt Meshulam
|
|-
|Kurt Gilman
|Matt Meshulam
|
|-
|Abel Greenwald
|Matt Meshulam
|
|-
|Vaidotas (Vai) Staugaitis
|Matt Meshulam
|
|-
|Leo Battikhi
|Matt Meshulam
|
|-
|Matt Schaid
|Matt Meshulam
|
|-
|Jamie Vollmer
|Matt Meshulam
|
|-
|Bhairavi Warke
|Matt Meshulam
|
|-
|Denis Kuznetsov
|Matt Meshulam
|
|-
|Brian Carstensen
|Matt Meshulam
|
|-
|Rob Dumas
|Matt Meshulam
|
|-
|Mark Weiser
|Matt Meshulam
|
|-
|Tom Burtonwood
|Matt Meshulam
|
|-
|Steve Madonna
|Matt Meshulam
|
|-
|Jason Araujo
|Matt Meshulam
|
|-
|Bruce Alan Mace
|Matt Meshulam
|
|-
|Molly Adamski
|Matt Meshulam
|
|-
|Jeremy Shaw
|Matt Meshulam
|
|-
|Sam Chen
|Matt Meshulam
|
|-
|John McBride
|Matt Meshulam
|
|-
|Adomas Tautkus
|Matt Meshulam
|
|-
|Tim Buckley
|Matt Meshulam
|
|-
|Martina Josimovska
|Matt Meshulam
|
|-
|James Jacobs
|Matt Meshulam
|
|-
|George Shaw
|Matt Meshulam
|
|-
|David Earl
|Matt Meshulam
|
|-
|[[User:pedrosk| Eduard Breuer]]
|Matt Meshulam
|
|-|-
|Matthew Kim
|Matt Meshulam
|
|-
|Corey Peoples
|Matt Meshulam
|
|-
|Paul Graham
|Matt Meshulam
|
|-
|Matt Grunstad
|Matt Meshulam
|
|-
|Rolf Scheidt
|Matt Meshulam
|
|-
|Arjun Sharma
|Matt Meshulam
|
|-
|Chris Laurent
|Matt Meshulam
|
|-
|[[User:dwlocks|Dan Locks]]
|Matt Meshulam
|
|-
|Zack Sasnow
|Matt Meshulam
|
|-
|Ben Stringer
|Matt Meshulam
|
|-
|[[User:Ekaj|Jacob Snyder]]
|Matt Meshulam
|8/24/17
|-
|James Beck
|Matt Meshulam
|9/13/17
|-
| Sam Gates
|Matt Meshulam
|10/01/17
|-
| Tommy TBones Cramer
|Matt Meshulam
|09/24/17
|-
| tee
|Matt Meshulam
|10/26/17
|-
|[[User:wittnl|Nathan Witt]]
|Matt Meshulam
|2017-12-09
|-
|[[User:GalaxyCascade|Steve Griegoliet]]
|Matt Meshulam
|12/09/17
|-
| Chinbayar Davaatseren
| Matt Meshulam
| 12/09/17
|-
|Theo T
|David Earl
|1/20/18
|-
|[[User:Frenchy|Jeremie Davis]]
|David Earl
|1/21/18
|-
|Armani Barron
|Matt Meshulam
|9/16/17
|-
|Scott Fullman
|David Earl
|02/24/18
|-
|Michael Donovan
|David Earl
|03/04/2018
|-
|Damon Carrvesco
|David Earl
|03/26/2018
|-
|Ryan Kelly
|David Earl
|03/26/2018
|-
|Will Coffin
|David Earl
|03/26/2018
|-
|Shabab Mustafa
|David Earl
|03/26/2018
|-
|Bruce Mace
|David Earl
|03/26/2018
|-
|Shahnawas Khokhar
|David Earl
|03/26/2018
|}

If you have been authorized but cannot log in, request to be added to the "ShopBot Authorized" Samba group (send an email to info (at) pumpingstationone.org with your username and the name of the person who certified you) so that your login works. If you don't have a log-in on https://members.pumpingstationone.org/ you will have issues here - sign up on that site first if you haven't already.

= Maintenance =

== Maintenance Log ==
{| class="wikitable" border="1"
!Date
!Preformed by
!Service Type
!Notes
|-
|4/16/2017
|Ryan Pierce
|Created new AutoDesk Fusion 360 Post Processor. Modified Vectric Post Processors.
|Created new Fusion 360 Post Processor. It includes the changes listed below for the Vectric Post Processors. For Vectric, modified the Post Processors so that if the spindle does not spin up, it gives the user a Retry/Cancel dialog box instead of Abort/Retry/Ignore where Ignore is identical to Retry. Also, these Post Processors broke the Preview mode in the ShopBot software because the preview mode did the real spindle check and it failed because, of course, the spindle wasn't running. The new version will ignore the spindle check in preview mode.
|-
|11/8/2014
|Ryan Pierce
|Updated VCarve Post Processor
|Previously, installed new Post Processor to preset an Abort / Retry / Ignore dialog box when the spindle is started but doesn't spin up. Usual culprit is that a job is started when the the interlock is disabled, which results in the non-spinning bit crashing into the workpiece. Abort stops the job. Today, fixed Retry code. If you power on the VFD and the motor start is enabled, the VFD refuses to start. So I've re-programmed the Retry button to stop the VFD, wait 2 seconds, start the VFD, wait 2 more seconds, and check again to see if it is running. The Ignore button actually acts as Retry because we don't want someone clicking through this dialog box and damaging the machine. NOTE: The Aspire PC in the shop also has this Post Processor, but if you use Aspire, VCarve Pro, etc. on your personal computer, you will need the latest Post Processor to support this safety check.
|-
|11/8/2014
|Ryan Pierce
|Updated ShopBot software
|Did upgrade from 3.8.14 to 3.8.26. Installed latest firmware on ShopBot controller. (This was mandatory.) Two features of interest: Fixed occasional erractic behavior after repeated Stops and Resumes (and Nudges or Command Insertions). Reduced liklihood of Keypad lockup.
|-
|5/31/2015
|Ron Olson
|Created new VCarve Post Processors
|For drag/engraving bits, it's important that the spindle be turned '''off''' so as to not destroy the bit. Instead of manually modifying the sbp every time to remove the check that the spindle is turned on, I created a couple of new post processors (inches and mm, similar to Ryan's), that explicitly ''turn off'' the spindle. The user is given two opportunities to cancel the job if that is not what he/she wants.
|-
|}

== Outstanding Maintenance Issues ==

=== Lack of True E-Stop ===
As shipped, the ShopBot PRS does not support an Emergency Stop. This could be hacked, but it runs the risk of damaging the machine if engaged in a non-emergency situation. Suggested solution: Installing a 10A double pole 24V coil DIN mount relay, and powering the coil via the 24V supply through a normally closed E-Stop button. One pole will disconnect the 63V stepper motor current. One pole will break the control signal that enables the VFD and will cause the VFD to brake to a stop.

=== Automatic Dust Collection ===
The ShopBot has +5V TTL outputs that could be used to trigger automatic dust collection (when the spindle goes live) and/or a warning light (when the gantry is enabled to move.)

=== Limit Switch Issues ===
Every time you start the ShopBot, it resets itself so that the limit switches are disabled! You can turn them on (if memory serves) with the Values -> Input Switch Assignment menu item. Limit switches are really useful - but they need to be enabled. When they are, they will stop manual jogging when the limit is hit (although pressing the key again will let you continue moving the gantry) and they will also stop a running job (but give you the option of ignoring the limits.)

I found a couple more problems when testing all the limits. When I took the gantry to X maximum, the dust collector hose pulled off! I put it back on, but I'm not sure how stable this is. Also, when I originally set the Y maximum and minimum, I wanted as much spindle travel as possible. But it appears that if you're at the Y max and move in the X direction, you can hit the middle support with the dust collector boot. We've got several inches Y travel beyond the nominal 48", so we may want to look into reducing this to clear the supports.

== Resources ==
[[File:ShopBot PSOne Post Processors.zip]] - Post Processors for Vectric Aspire and VCarve Pro 8.0 which includes the change to check that the spindle actually started.

[[File:ShopBot_TC_PS1-NO-SPIN.zip]] - Post Processors for Vectric Aspire and VCarve Pro which include changes to explicitly *disable* spinning

[[File:ShopBot PSOne Fusion 360 Post Processor.zip]] - Post Processor for Autodesk Fusion 360 which includes the change to check that the spindle actually started.

[[Category:Fabrication]]
[[Category:CNC]]
[[Category:Future Things Bus Data Sources]]

Router Table (was Excalibur)

2017-12-18T07:56:44Z

Michaeldonovan: /* List of Currently Certified Users */

== Router ==

{{Template:EquipmentPage
| image = Excalibur.jpg
|owner = PS:One
|serial =
|certification = yes
|hackable = no
|model =
|arrived =
|doesitwork = yes
|contact =
|where = Wood Shop
|hostarea = Wood Shop
|value =
}}

'''This tool requires authorization for use.'''

Excalibur Router Table <br>
http://www.general.ca/products/2_excalibur/40-200.html

manual: [[File:Excalibur_router_manual.pdf]]

Porter-Cable 7518 router

{{WoodshopProctors}}

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date Certified
|-
|Keon Turner
|Ron Olson
|10/19/15
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|Tim Saylor
|Danger Committee
|-
|Dillon Gray
|Danger Committee
|-
|Shawn Blaszak
|
|-
|Adrianna McKinley
|Tim Saylor
|-
|Kathy Whisler
|Tim Saylor
|-
|James Longfield
|Tim Saylor
|-
|Eric Veggeberg
|Tim Saylor
|-
| Madeleine Klichowski
| Tim Saylor
|-
| Lyn Cole
| Tim Saylor
|-
| Nathan Becka
| Tim Saylor
|-
| Brian Carstensen
| Tim Saylor
|-
| Matt Triano
| Tim Saylor
|-
|Bryan Gleason
|Matt Triano
|-
|Daniel Wells
|Matt Triano
|-
|Sean Corbett
|Matt Triano
|-
|Michael Skilton
|Matt Triano
|-
|Aaron Feigen
|Matt Triano
|-
|Ryan Pierce
|Dan Locks
|-
|John Godwim
|Matt Triano
|-
|Nate Hutchins
|Matt Triano
|-
|Jeff Molek
|Matt Triano
|-
|Sloan Lavery
|Matt Triano
|-
|Trey Keifer
|Matt Triano
|-
|Juan Robles
|Matt Triano
|-
|Simon Cygielski
|Matt Triano
|-
|Tom Forajter
|Matt Triano
|-
|Robert Grossman
|Matt Triano
|-
|Lucas Morris
|Matt Triano
|-
|Sergio Preston
|Matt Triano
|-
|Ron Bean
|Matt Triano
|-
|Greg Eagel
|Matt Triano
|-
|Carter Constana
|Matt Triano
|-
|Adam Glick
|Matt Triano
|-
|Zachary Fietsch
|Matt Triano
|-
|Solomon Hursey
|Matt Triano
|-
|Jesse Reynolds
|Matt Triano
|-
|Eduard Shlahtichman
|Matt Triano
|-
|Skittles Rainbow
|Matt Triano
|-
|Tom Jurgensen
|Matt Triano
|-
|Barmey Ung
|Matt Triano
|-
|Casey Olson
|Matt Triano
|-
|Jonathan Bisson
|Matt Triano
|-
|Bandit Gangwere
|Matt Triano
|-
|Joseph Nudell
|Matt Triano
|-
|David Butler
|Matt Triano
|-
|Kathryn Smiley
|Matt Triano
|-
|Aimee Spevak
|Matt Triano
|-
|Cassie Webster
|Matt Triano
|-
|Chris Moylan
|Matt Triano
|-
|Mike O'Connor
|Matt Triano
|-
|Tyler Hsu
|Matt Triano
|-
|Dee Newcum
|Matt Triano
|-
|Zihe "Johnson" Luo
|Matt Triano
|-
|Giovanni Arroyo
|Matt Triano
|-
|Nathan Ellis
|Matt Triano
|-
|Ian McLeod
|Nathan Ellis
|-
|Brandon Price
|Matt Triano
|-
|Arturo Duarte
|Matt Triano
|-
|Eric Braun
|Matt Triano
|-
|Jeremy Fay
|Matt Triano
|-
|Leeswann Bolden
|Matt Triano
|-
|James Porter
|Matt Triano
|-
|Jeff McBride
|Matt Triano
|-
|Connor Miller
|Matt Triano
|-
|Ashley Duca
|Matt Triano
|-
|Karen Niemczyk
|Matt Triano
|-
|Bassam Alshammari
|Matt Triano
|-
|John Fiene
|Matt Triano
|-
|Thomas Wright
|Matt Triano
|-
|Joseph Peltier
|Matt Triano
|-
|Justin Conroy
|Matt Triano
|-
|David Koppel
|Matt Triano
|-
|Sevin Straus
|Matt Triano
|-
|Roger Moore
|Matt Triano
|-
|Valerie Moore
|Matt Triano
|-
|Andy Schwartz
|Matt Triano
|-
|Assaf Evron
|Matt Triano
|-
|David Pelot
|Matt Triano
|-
|Rich Smith
|Matt Triano
|-
|Khoi Nguyen
|Matt Triano
|-
|Brian Keehner
|Matt Triano
|-
|Jesse Gare
|Matt Triano
|-
|Tyler Natoli
|Matt Triano
|-
|David Siegfried
|Matt Triano
|-
|Annie Zebula
|Matt Triano
|-
|Eliya Gwetta
|Matt Triano
|-
|Patrick Schliss
|Matt Triano
|-
|Arjun Wadnerkar
|Matt Triano
|-
|Touly Phiachantharath
|Matt Triano
|-
|Matt Vibberts
|Matt Triano
|-
|Thomas Garza
|Matt Triano
|-
|Will Garza
|Matt Triano
|-
|Brennan Koziarz
|Matt Triano
|-
|Alec Weege
|Matt Triano
|-
|Eric Beauchamp
|Matt Triano
|-
|Clarence Risher
|Matt Triano
|-
|Erica Tesla
|Matt Triano
|-
|Jabu Dawdu
|Matt Triano
|-
|Karen Murphey
|Matt Triano
|-
|Matt Meshulam
|Matt Triano
|-
|Josh Myers
|Matt Triano
|-
|Weston Tanner
|Matt Triano
|-
|Hugh Sato
|Matt Triano
|-
|Nora Sluzas
|Matt Triano
|-
|Elizabeth Koprucki
|Matt Triano
|-
|Oscar Villareal
|Matt Triano
|-
|Rob Paral
|Matt Triano
|-
|Alex Schaffer
|Matt Triano
|-
|Szymon Sambor
|Matt Triano
|-
|Michael Solhelm
|Matt Triano
|-
|[[User:lucas|Lucas Goossen]]
|Matt Triano
|-
|[[User:Mwilkens|Matt Wilkens]]
|Matt Triano
|-
|Eric Slehofer
|Matt Triano
|-
|Jon Levine
|Matt Triano
|-
|Melody Snyder
|Matt Triano
|-
|Curtis Cooke
|Matt Triano
|-
|Harry Morgan
|Matt Triano
|-
|Sam Drazin
|Matt Triano
|-
|Mike Kislovsky
|Matt Triano
|-
|Keven Kalay
|Matt Triano
|-
|Sam Reicks
|Ron Olson
|-
|Kevin Pulver
|Ron Olson
|-
|Cary Lahucik
|Ron Olson
|-
|Keith Hultman
|Ron Olson
|-
|Mario Rodriguez
|Ron Olson
|-
|John Keippel
|Ron Olson
|-
|Szilvia Precsinszki
|Ron Olson
|-
|Davis Mazariegos
|Ron Olson
|-
|Pete Noverini
|Matt Triano
|-
|Mike Coriale
|Matt Triano
|-
|Dan Baltudis
|Ron Olson
|-
|David Fell
|Ron Olson
|-
|Dubi Kaufmann
|Ron Olson
|-
|Patrick Grider
|Ron Olson
|-
|Tyler Matthew
|Matt Triano
|-
|Shae Kurko
|Matt Triano
|-
|John Farmer
|Ron Olson
|-
|Sam Paris
|Ron Olson
|-
|Frances Ritchie
|Ron Olson
|-
|Ben Kern
|Ron Olson
|-
|Eric Yu
|Ron Olson
|-
|Knute Martell
|Ron Olson
|-
|Karol Slowikowski
|Ron Olson
|-
|Chris Smith
|Ron Olson
|-
|Benjamin Miller
|Ron Olson
|-
|Jennie P
|Ron Olson
|-
|Eugene Liokumovich
|Ron Olson
|-
|Laurel Garrett
|Matt Triano
|-
|Rei Kevin
|Matt Triano
|-
|Aji Slater
|Matt Triano
|-
|John Beyer
|Matt Triano
|-
|Brad Topol
|Matt Triano
|-
|[[User:papaben44|Benjamin Dambman]]
|Matt Triano
|4/14/2015
|-
|Tomas Ward
|Ron Olson
|4/26/2015
|-
|Les Schier
|Jason Shanfield
|5/2/15
|-
|Andy Richardson
|Matt Triano
|4/14/15
|-
|Erik Wessing
|Eric Beauchamp
|-
|Ray Doeksen
|Eric Beauchamp
|-
|Ryan Neuman
|Ron Olson
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|Ralph Brendler
|Eric Beauchamp
|8/27/2015
|-
|Jim Baker
|Eric Beauchamp
|8/27/2015
|-
|Kyle Bieneman
|Ron Olson
|-
|Glenn Powers
|Jason Shanfield
|10/18/2015
|-
|Niko Hawley
|Eric Beauchamp
|-
|Kevin Mitchell
|Eric Beauchamp
|-
|[[User:themoffatt|Adam Moffatt]]
|Eric Beauchamp
|10/22/2015
|-
|Jean Michel Crettaz
|Eric Beauchamp
|10/22/2015
|-
|-Caleb Young
|-Eric Beauchamp
|-
|Peter Letscher
|Eric Beauchamp
|11/05/15
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Shine Chen
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/03/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Chris Kohl
|Eric Beauchamp
|1/8/2016
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Shelly Loke-Gayares
|Eric Beauchamp
|1/14/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Brian Cuocci
|Andy L
|3/17/16
|-
|Julie Zwolinski
|Eric Beauchamp
|3/24/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Colin Campbell
|Andy L
|5/5/16
|-
|Hans Griese
|Andy Larkin
|5/5/16
|-
|Spencer Simms
|Eric Beauchamp
|05/19/2016
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Ian Monroe
|Eric Beauchamp
|5/19/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|An Phan
|Andy Larkin
|7/7/16
|-
|Derwin Umali
|Andy Larkin
|8/4/16
|-
|Simon Pyle
|Andy Larkin
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Matt Schaid
|Andy Larkin
|01/05/17
|-
|Jamie Vollmer
|Andy Larkin
|01/05/17
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Ashley Borg
|Andy Larkin
|4/13/17
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Molly Adamski
|Ralph Brendler
|4/27/17
|-
|Shabab Mustafa
|Ralph Brendler
|4/27/17
|-
|Brett Sanderson
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|David Earl
|Ralph Brendler
|5/4/2017
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Kari Danek
|Ralph Brendler
|6/16/17
|-
| [[User:spektre1|Danielle MacDonald]]
| Ralph Brendler
| 2017-06-29
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Corey TOyama
|Ralph Brendler
|11/30/2017
|-
|Theo T
|Ralph Brendler
|11/30/2017
|-
|Jeff Hassberger
|Ralph Brendler
|11/2/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-}

[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Wood Shop]]

Laguna 16" Planer

2017-12-18T07:55:59Z

Michaeldonovan: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner = PS:One
|certification = yes
|hackable = no
|model = MPLAN1510-0120
|serial = 144367
|arrived =
|doesitwork = yes
|contact =
|where = Wood Shop
|value = $3000
|image = LagunaPlaner.jpg
|hostarea = Wood Shop
}}
== reference material ==
[[file:Laguna16PlanerManual.pdf]]
== Guidelines for proper use ==
# '''Always''' check your wood for nails or staples. Something as small as the staple at the end of a 1x1 can ruin the blades. If you're not sure, check the entire piece with the metal detector sitting on the table saw.
# '''Always''' measure the thickness of your work and set the initial and working blade height to remove only small amounts of material per pass. You will damage the blades if you manage to dig the machine out on your work.
# If the machine is making a strange noise when you use it, there is a problem, and you should '''ask for help.'''
# If the blades are dull or damaged, '''contact the area host immediately.'''
# If you break something, or damage the tool, '''contact the area host immediately.''' Don't let others do more damage or hurt themselves by using a broken tool.
# '''Always''' make sure that the dust collection bag isn't too full and is passing air freely.
# '''Always''' vacuum the machine, cutting area, and the table around the machine when you are done.

'''This tool requires authorization for use.'''

== Checklist ==
PS1 is experimenting with the use of [[checklists]] to encourage the safe use and proper care of tools in the workspace. The latest version of the checklist for this tool is stored as a [https://docs.google.com/document/d/1C0pna59ZDq92vC2uEZM5ANUGh6qx-svit9atMhJNLm8/edit?usp=sharing Google Doc] that can be edited by anyone. If you make changes, update the effective date at the bottom of the document. Print a new copy, and replace the old one.

{{WoodshopProctors}}

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Matt Triano
|Danger committee
|-
|Eric Beauchamp
|Danger committee
|-
|Jason Shanfield
|Matt Triano
|-
|Tom Judge
|Matt Triano
|-
|Hunter Koerner
|Eric Beauchamp
|-
|Deanna Williams
|Eric Beauchamp
|-
|Casey Olson
|Eric Beauchamp
|-
|Burton Kent
|Eric Beauchamp
|-
|Jeff Smykil
|Matt Triano
|-
|Anna Yu
|Jason Shanfield
|-
|Todd Allen
|Ron Olson
|-
|Jon Levine
|Jason Shanfield
|-
|Kyle Bieneman
|Eric Beauchamp
|-
|Niko Hawley
|Eric Beauchamp
|-
|-
|Adam Moffatt
|Eric Beauchamp
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|Keon Turner
|Ron Olson
|-
|Mike Mandrea
|Eric Beauchamp
|-
|-Caleb Young
|-Eric Beauchamp
|-
|Erik Wessing
|Eric Beauchamp
|-
|Doorman Dave
|Eric Beauchamp
|-
|Peter Letscher
|Eric Beauchamp
|11/05/15
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Shine Chen
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/03/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Chris Kohl
|Eric Beauchamp
|1/8/2016
|-
|Szymon Sambor
|Eric Beauchamp
|1/8/2016
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Shelly Loke-Gayares
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Julie Zwolinski
|Eric Beauchamp
|3/24/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Greg "Nerobro" Teiber
|Dan Locks
|4/29/16
|-
|Ken Burkhardt
|Andy Larkin
|5/5/16
|-
|Hans Griese
|Andy Larkin
|5/5/16
|-
|Spencer Simms
|Eric Beauchamp
|05/19/2016
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Ian Monroe
|Eric Beauchamp
|5/19/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
|Jim Brink
|Andy Larkin
|07/21/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|Derwin Umali
|Andy Larkin
|8/7/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Joe Dowling
|Ken Burkhardt
|8/15/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|Brian Cuocci
|Andy L
|9/15/16
|-
|Revant Ohri
|Andy L
|9/15/16
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Aaron Mintz
|Ken Burkhardt
|10/17/16
|-
|Brian Carstensen
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|Robert Richardson
|Ken Burkhardt
|10/17/16
|-
|Jack Berg
|Ken Burkhardt
|11/07/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Ashish Jasani
|Andy Larkin
|11/28/16
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|-
|Crystal Morales
|Andy Larkin
|2017-03-16
|-
|Jason Pittman
|Andy Larkin
|2017-03-16
|-
|Ashley Borg
|Andy Larkin
|4/13/17
|-
|Sam Chen
|Andy Larkin
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Molly Adamski
|Ralph Brendler
|4/27/17
|-
|Shabab Mustafa
|Ralph Brendler
|4/27/17
|-
|Adomas Tautkus
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|David Earl
|Ralph Brendler
|5/4/17
|-
|Luis Colmenares
|Ralph Brendler
|6/1/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Mark Haughey
|Sevin Straus
|9/30/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
| Tommy TBones Cramer
|Ralph Brendlet
|08/30/17
|-
|Mike Thariath
|Ralph Brendlet
|10/19/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/02/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Theo T
|Ralph Brendler
|11/30/2017
|-
|Jeff Hassberger
|Ralph Brendler
|11/2/17
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Mac MacDevitt
|Paul V
|12/7/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-}

[[Category:Wood Shop]]

Delta Drill Press (12in)

2017-12-18T07:55:18Z

Michaeldonovan: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner = Ed Bennett
|certification = yes
|hackable = no
|model = 11-990
|serial = W9620
|arrived = 1/1/12
|doesitwork = yes
|contact = Ed Bennett
|where =Wood Shop
|value = ~ $200
|hostarea = Wood Shop
|image = Delta_12_drill_press.jpg
}}

{{WoodshopProctors}}

* '''Spindle speed:''' 620 - 3100 RPM

== Training resources ==
* [http://www.mikestools.com/download/Delta_Drill_Press_Owners_Manuals/Delta_11-990.pdf Instruction Manual] ([http://wiki.artisansasylum.com/index.php/File:Drill_Press_--_Delta_11-990_--_Manual.pdf mirror])

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Anna Yu
|Ed Bennett
|-
|Justin Miles
|Anna Yu
|-
|Max Stahl
|Anna Yu
|-
|Cody Greene
|Anna Yu
|-
|Zac Mitton
|Anna Yu
|-
|Stephan Kulov
|Anna Yu
|-
| Madeleine Klichowski
| Tim Saylor
|-
| Lyn Cole
| Tim Saylor
|-
| Nathan Becka
| Tim Saylor
|-
| Brian Carstensen
| Tim Saylor
|-
|Michael Skilton
|Tim Saylor
|-
| Eric Veggeberg
| Tim Saylor
|-
|Bryan Gleason
|Matt Triano
|-
|John Godwim
|Matt Triano
|-
|Nate Hutchins
|Matt Triano
|-
|Jeff Molek
|Matt Triano
|-
|Jason Shanfield
|Matt Triano
|-
|Sloan Lavery
|Matt Triano
|-
|Daniel Wells
|Matt Triano
|-
|Sean Corbett
|Matt Triano
|-
|Aaron Feigen
|Matt Triano
|-
|Bo Driscoll
|Matt Triano
|-
|Joel Shepherd
|Matt Triano
|-
|Santina Croniser
|Matt Triano
|-
|Todd Allen
|Matt Triano
|-
|Lawrence MacDevitt
|Matt Triano
|-
|Ryan Kelly
|Matt Triano
|-
|Melody Stanley
|Matt Triano
|-
|Tom Ackenhausen
|Matt Triano
|-
|Trey Keifer
|Matt Triano
|-
|Juan Robles
|Matt Triano
|-
|Simon Cygielski
|Matt Triano
|-
|Tom Forajter
|Matt Triano
|-
|Robert Grossman
|Matt Triano
|-
|Lucas Morris
|Matt Triano
|-
|Sergio Preston
|Matt Triano
|-
|Ron Bean
|Matt Triano
|-
|Greg Eagel
|Matt Triano
|-
|Carter Constana
|Matt Triano
|-
|Adam Glick
|Matt Triano
|-
|Zachary Fietsch
|Matt Triano
|-
|Solomon Hursey
|Matt Triano
|-
|Jesse Reynolds
|Matt Triano
|-
|Eduard Shlahtichman
|Matt Triano
|-
|Skittles Rainbow
|Matt Triano
|-
|Tom Jurgensen
|Matt Triano
|-
|Barmey Ung
|Matt Triano
|-
|Casey Olson
|Matt Triano
|-
|Jonathan Bisson
|Matt Triano
|-
|Zihe "Johnson" Luo
|Matt Triano
|-
|Giovanni Arroyo
|Matt Triano
|-
|-
|Edward Muela
|Anna Yu
|-
|Samuel Swope
|Anna Yu
|-
|Brandon Price
|Matt Triano
|-
|Arturo Duarte
|Matt Triano
|-
|Eric Braun
|Matt Triano
|-
|Jeremy Fay
|Matt Triano
|-
|Leeswann Bolden
|Matt Triano
|-
|James Porter
|Matt Triano
|-
|Jeff McBride
|Matt Triano
|-
|Connor Miller
|Matt Triano
|-
|Ashley Duca
|Matt Triano
|-
|Karen Niemczyk
|Matt Triano
|-
|Bassam Alshammari
|Matt Triano
|-
|John Fiene
|Matt Triano
|-
|Thomas Wright
|Matt Triano
|-
|Joseph Peltier
|Matt Triano
|-
|Justin Conroy
|Matt Triano
|-
|David Koppel
|Matt Triano
|-
|Sevin Straus
|Matt Triano
|-
|Khoi Nguyen
|Matt Triano
|-
|Brian Keehner
|Matt Triano
|-
|Jesse Gare
|Matt Triano
|-
|Tyler Natoli
|Matt Triano
|-
|David Siegfried
|Matt Triano
|-
|Annie Zebula
|Matt Triano
|-
|Eliya Gwetta
|Matt Triano
|-
|Patrick Schliss
|Matt Triano
|-
|Arjun Wadnerkar
|Matt Triano
|-
|Touly Phiachantharath
|Matt Triano
|-
|Matt Vibberts
|Matt Triano
|-
|Thomas Garza
|Matt Triano
|-
|Will Garza
|Matt Triano
|-
|Brennan Koziarz
|Matt Triano
|-
|Jeremy Bloyd-Peshkin
|Sacha D'Angeli
|-
|Alec Weege
|Matt Triano
|-
|Eric Beauchamp
|Matt Triano
|-
|Clarence Risher
|Matt Triano
|-
|Erica Tesla
|Matt Triano
|-
|Jabu Dawdu
|Matt Triano
|-
|Karen Murphey
|Matt Triano
|-
|Matt Meshulam
|Matt Triano
|-
|Josh Myers
|Matt Triano
|-
|Weston Tanner
|Matt Triano
|-
|Hugh Sato
|Matt Triano
|-
|Nora Sluzas
|Matt Triano
|-
|Elizabeth Koprucki
|Matt Triano
|-
|Oscar Villareal
|Matt Triano
|-
|Rob Paral
|Matt Triano
|-
|Alex Schaffer
|Matt Triano
|-
|Szymon Sambor
|Matt Triano
|-
|Michael Solhelm
|Matt Triano
|-
| Rob Paral
| Michael Skilton
|-
|[[User:lucas|Lucas Goossen]]
|Matt Triano
|-
| Eugene Liokumovich
| Ron Olson
|-
|Les Schier
|Jason Shanfield
|-
| Jeff Lawson
| Ron Olson
|-
| Connor Jansen
| Eric Beauchamp
|-
|Ryan Neuman
|Ron Olson
|-
|Kyle Bieneman
|Ron Olson
|-
|Dan Baltudis
|Ron Olson
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|Jim Baker
|Eric Beauchamp
|-
|Deanna Williams
|Eric Beauchamp
|-
|Peter Letscher
|Eric Beauchamp
|11/05/15
|-
|Glenn Trussell
|Eric Beauchamp
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/15
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/15
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Shelly Loke-Gayares
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Sam Paris
|Eric Beauchamp
|1/14/16
|-
|Craig Koszewski
|Eric Beauchamp
|1/27/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Julie Zwolinski
|Eric Beauchamp
|3/24/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Ian Monroe
|Eric Beauchamp
|5/19/16
|-
|An Phan
|Andy Larkin
|7/16/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Matt Schaid
|Andy Larkin
|01/05/17
|-
|Jamie Vollmer
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Chris Ruhland
|Andy Larkin
|01/19/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|Ashley Borg
|Andy Larkin
|4/13/17
|-
|Abel Greenwald
|Andy Larkin
|
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
| [[User:spektre1|Danielle MacDonald]]
| Ralph Brendler
| 2017-06-29
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-}

[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Wood Shop]]
[[Category:Loaned Equipment]]

Supermax 25x2 Drum Sander

2017-12-18T07:54:53Z

Michaeldonovan: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner=PS:One
|model=25x2
|serial=?
|arrived=
|doesitwork=yes
|contact=[[user: ericbeau|Eric Beauchamp]]
|where=Wood Shop
|certification=yes
|hackable=no
|value=$2700
|image=SupermaxSander.jpg
|hostarea=Wood Shop
}}

== Notes ==

*For oily or dense woods (tropical hardwoods, etc), take only very light passes to prevent clogging the sandpaper.

*Use a belt cleaner occasionally to refresh the sandpaper

== Safety ==

This sander features overload detection. If the machine detects too high a load, it will automatically slow down the feed. This saves wear and tear on the machine, but may cause burning of the workpiece if you cut too aggressively.

*The height adjustment on this machine is VERY aggressive. A full turn will raise the table by more than 2mm (a typical cut should be < .5mm). '''PLEASE USE A MAXIMUM OF 1/8 TURN OF THE HEIGHT WHEEL PER PASS!'''

* Make your first cuts with a very slow speed (10 or less). Once you are sure the load is OK you can gradually increase the speed on subsequent passes.

*When overload detection kicks in, a red light next to the speed control will turn on. '''IF YOU SEE THIS LIGHT, PLEASE REDUCE YOUR DEPTH OF CUT AND/OR FEED RATE!'''

*Like all of our other sanders, sleeves must be above the elbow, and no gloves should be worn. It's pretty easy to get pulled into the rollers.

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Eric Beauchamp
|Danger committee
|6/23/2017
|-
|Ralph Brendler
|Danger committee
|6/23/2017
|-
|Paul van Lake
|Danger committee
|6/23/2017
|-
|Zack Sasnow
|Jason Shanfield
|8/27/17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-}

[[Category:Shop Equipment]]
[[Category:Wood Shop]]

==Outside Links==

*[http://www.supermaxtools.com/products/wood/25x2-double-drum-sander Manufacturer's Page]
*[http://www.supermaxtools.com/wp-content/uploads/25x2_37x2-10-2015.pdf Owner's Manual]

Sears Scroll Saw

2017-12-18T07:54:24Z

Michaeldonovan: /* List of Currently Certified Users */

{{Template:EquipmentPage
|owner = PS:One
|model = Sears/Craftsman 137.216160
|serial = RFW11
|arrived = April 2009
|doesitwork = yes
|contact = Dan Meyer
|where = Wood Shop
|certification = yes
|hackable = no
|value = $100
|hostarea = Wood Shop
|image = Sears_scroll_saw_small.jpg
}}

{{WoodshopProctors}}

== Documentation ==
* [http://www.managemylife.com/mmh/lis_pdf/OWNM/L0808290.pdf Owner's manual]

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member Keon Turner
! Trained By Ron Olson
|-
|Adam Flynn
|Danger Committee
|-
|Julie Moffitt
|Danger Committee
|-
|Sacha De'Angeli
|Danger Committee
|-
|Eric Michaud
|Danger Committee
|-
|Dan Davis Bodeiaver?
|Danger Committee
|-
|Tim Saylor
|Danger Committee
|-
|Zane Bowers
|Danger Committee
|-
|Teddie Goldenberg
|Seth D. Slis?
|-
|Nicolle Nevlist
|Seth D. Slis?
|-
|Jeff Kantarek
|Eric Michaud
|-
|Chris Luiz
|Eric Michaud
|-
|Avner Shanan
|Chris Luiz
|-
|David Mole
|Tim Saylor
|-
|Sarah Sutherlin
|Jeff Kantarek
|-
|Jeannette Thraen
|Sarah Sutherlin
|-
|Jasna Delic
|Sarah Sutherlin
|-
|Nathan Witt
|?
|-
|Tom Ketola
|Nathan Witt
|-
|Geoffrey Topham
|Nathan Witt
|-
|John Stoner
|Nathan Witt
|-
|Ryan Lanham
|Nathan Witt
|-
|Brian Cordanvier
|Nathan Witt
|-
|Jim Burke
|Nathan Witt
|-
|Anne Petersen
|Nathan Witt
|-
|Cory Knapp
|Nathan Witt
|-
|Joshua Rothhaas
|Shawn Blaszak
|-
|Jay Hopkins
|Shawn Blaszak
|-
|Jordan Bunker
|Nathan Witt
|-
|Constomtin Gowileson?
|Nathan Witt
|-
|Alek Shnayder
|Nathan Witt
|-
|John Dorfman
|Nathan Witt
|-
|Jakub Klimuszko
|Sacha De'Angeli
|-
|Adrianna McKinley
|?
|-
|Nathan Witt
|Adrianna McKinley
|-
|Bryer Le?
|Eric Michaud
|-
|Matt Bran
|Shawn Blaszak
|-
|Nick Ferrari
|Tim Saylor
|-
|Chris Fanning
|Shawn Blaszak
|-
|Mike Warot
|Adrianna McKinley
|-
|Gabriel Rosenhouse
|Adrianna McKinley
|-
|Malerie Kaplan
|Tim Saylor
|-
|Tucker Tomlinson
|Shawn Blaszak
|-
|Joseph Prosninitz
|Adrianna McKinley
|-
|Steve Farkas
|Adrianna McKinley
|-
|Ryan Pierce
|Adrianna McKinley
|-
|Michael Reddy
|Tim Saylor
|-
|Matt Triano
|Tim Saylor
|-
|Derek Bever
|Tim Saylor
|-
|Dan Willmott
|Tim Saylor
|-
|Tyler DeAngelo
|Tim Saylor
|-
|Michael Skilton
|Tim Saylor
|-
|Kathy Whisler
|Adrianna McKinley
|-
|Janet Dornhoff
|Matt Triano
|-
|Hilary Lee
|Matt Triano
|-
|Will Rante
|Matt Triano
|-
|Henry Behel
|Matt Triano
|-
|Alan Livshin
|Matt Triano
|-
|Michelle Garcia
|Matt Triano
|-
|Daylan Dufelmeier
|Matt Triano
|-
|Michael Maloney
|Matt Triano
|-
|Ian Cochran
|Matt Triano
|-
|Bryan Gleason
|Matt Triano
|-
|Sloan Lavery
|Matt Triano
|-
|Trey Keifer
|Matt Triano
|-
|Juan Robles
|Matt Triano
|-
|Simon Cygielski
|Matt Triano
|-
|Tom Forajter
|Matt Triano
|-
|Robert Grossman
|Matt Triano
|-
|Lucas Morris
|Matt Triano
|-
|Sergio Preston
|Matt Triano
|-
|Casey Olson
|Matt Triano
|-
|David Fell
|Ron Olson
|-
|Dubi Kaufmann
|Ron Olson
|-
|Patrick Grider
|Ron Olson
|-
|John Farmer
|Ron Olson
|-
|Sam Paris
|Ron Olson
|-
|Frances Ritchie
|Ron Olson
|-
|Ben Kern
|Ron Olson
|-
|Eric Yu
|Ron Olson
|-
|Karol Slowikowski
|Ron Olson
|-
|Chris Smith
|Ron Olson
|-
|Benjamin Miller
|Ron Olson
|-
|Laurel Garrett
|Matt Triano
|-
|Rei Kevin
|Matt Triano
|-
|Aji Slater
|Matt Triano
|-
|John Beyer
|Matt Triano
|-
|Brad Topol
|Matt Triano
|-
|-
|Shae Kurko
|Matt Triano
|-
|Hunter Koerner
|Eric Beauchamp
|-
|Kurt Ziegel
|Eric Beauchamp
|-
|Simon Pyle
|Eric Beauchamp
|-
|Connor Jansen
|Eric Beauchamp
|-
|Ananda Stevens
|Eric Beauchamp
|-
|Erik Wessing
|Eric Beauchamp
|-
|Mark Stevens
|Eric Beauchamp
|-
|Sam Paris
|Eric Beauchamp
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|Kyle Bieneman
|Eric Beauchamp
|8/27/2015
|-
|Jim Baker
|Eric Beauchamp
|8/27/2015
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|-
|Niko Hawley
|Eric Beauchamp
|-
|Kevin Mitchell
|Eric Beauchamp
|-
|-Caleb Young
|-Eric Beauchamp
|-
|[[User:themoffatt|Adam Moffatt]]
|Eric Beauchamp
|10/22/2015
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Ashley Borg
|Andy Larkin
|4/3/17
|-
|Sam Chen
|Andy Larkin
|-
|Abel Greenwald
|Andy Larkin
|-
|Luis Colmenares
|Ralph
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Corey Toyama
|Ralph Brendler
|11/30/2017
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-}
[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Wood Shop]]

Ridgid Oscillating Spindle Sander

2017-12-18T07:54:01Z

Michaeldonovan: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner = PS:One
|certification=yes
|hackable = NO
|model = G0654
|serial = NA
|arrived = December 2014
|doesitwork = yes
|contact = Matt Triano
|where = Wood Shop
|hostarea = Wood Shop
|value = $200.00
}}

'''This tool requires authorization for use.'''

{{WoodshopProctors}}

== Rules ==
# Always check your wood for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet.
# Always use dust collection.
# Always use the appropriate washer with the oscillating drums, and put the washers away when you're done.
# Adjust the belt sander so that the belt tracks without running against the metal supports.
# Always replace washers and throat plates in their respective slots on the front of the machine when you switch accessories.

== Documentation ==
* [https://www.ridgid.com/us/en/oscillating-edge-belt-spindle-sander Links to manual and parts list]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Matt Triano
|Matt Triano
|-
|Erin Kunkel
|Matt Triano
|-
|Tyler Matthew
|Matt Triano
|-
|Shae Kurko
|Matt Triano
|-
|Ben Bogler
|Matt Triano
|-
|Sam Paris
|Ron Olson
|-
|Knute Martell
|Ron Olson
|-
|Chris Kleehammer
|[[User:jason|Jason Shanfield]]
|-
|Trey Elliott
|[[User:jason|Jason Shanfield]]
|-
|Nik Brink
|[[User:jason|Jason Shanfield]]
|-
|Frances Ritchie
|Ron Olson
|-
|Ben Kern
|Ron Olson
|-
|Eric Yu
|Ron Olson
|-
|Karol Slowikowski
|Ron Olson
|-
|Chris Smith
|Ron Olson
|-
|Ryan Pierce
|Matt Triano
|-
|Benjamin Miller
|Ron Olson
|-
|Jennie P
|Ron Olson
|-
|Eugene Liokumovich
|Ron Olson
|-
|Tomas Ward
|Ron Olson
|4/26/2015
|-
|Les Schier
|Jason Shanfield
|5/2/15
|-
|Hunter Koerner
|Eric Beauchamp
|6/4/15
|-
|Erik Wessing
|Eric Beauchamp
|-
|Kurt Ziegel
|Eric Beauchamp
|6/4/15
|-
|Simon Pyle
|Eric Beauchamp
|6/4/15
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|Ralph Brendler
|Eric Beauchamp
|8/27/2015
|-
|Kyle Bieneman
|Eric Beauchamp
|8/27/2015
|-
|Jim Baker
|Eric Beauchamp
|8/27/2015
|-
|Shane Kanter
|Ron Olson
|9/12/2015
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|Deanna Williams
|Eric Beauchamp
|-
|Niko Hawley
|Eric Beauchamp
|-
|Kevin Mitchell
|Eric Beauchamp
|-
|[[User:themoffatt|Adam Moffatt]]
|Eric Beauchamp
|10/22/2015
|-
|Mike Mandrea
|Eric Beauchamp
|11/5/2015
|-
|-Caleb Young
|-Eric Beauchamp
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/03/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Shelly Loke-Gayares
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Joe Dowling
|Ken Burkhardt
|8/15/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|Brian Cuocci
|Andy L
|9/15/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|Bruce Mace
|Eric Beauchamp
|02/20/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/2017
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Corey TOyama
|Ralph Brendler
|11/30/2017
|-
|Theo T
|Ralph Brendler
|11/30/2017
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-}

[[Category:Shop Equipment]]
[[Category:Wood Shop]]

Bosch Sliding Compound Miter Saw

2017-12-18T07:53:17Z

Michaeldonovan: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner=PS:One
|model=GCM12SD
|serial=610003177
|arrived=
|doesitwork=yes
|contact=[[user: ericbeau|Eric Beauchamp]]
|where=Wood Shop
|certification=yes
|hackable=no
|value=$500
|image=BoschMiter.jpg
|hostarea=Wood Shop
}}

== Notes ==

== Safety ==

== Maintenance ==
[[Bosch_Sliding_Compound_Miter_Saw_maintenance| Bosch miter saw maintenance]]

[[Category:Shop Equipment]]
[[Category:Wood Shop]]

==Outside Links==

*[https://content.abt.com/documents/50981/GCM12SD_manual.pdf/93000-93999/93762.pdf User's Manual]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Eric Beauchamp
|Danger committee
|-
|Sam Paris
|Andy Larkin
|-
| [[User:andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| April 26, 2017
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Justin Pestka
|Ralph Brendler
|8/30/17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Jeff Hassberger
|Ralph Brendler
|11/2/17
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Mac MacDevitt
|Paul V
|12/7/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-}

Drill Press Craftsman 20in woodshop

2017-12-18T07:52:43Z

Michaeldonovan: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner=PS:One
|model=
|serial=
|arrived=
|doesitwork=yes
|contact=[[user: ericbeau|Eric Beauchamp]]
|where=Wood Shop
|certification=yes
|hackable=no
|value=$500
|image=Craftsman20Drill.jpg
|hostarea=Wood Shop
}}

The Craftsman 20" drill press is the primary drill press in the wood shop. Authorization is included in the general wood shop authorization. For upcoming authorizations, see the [https://pumpingstationone.org/events/ calendar].

== Safety ==
The [[:file:Craftsman20_drill_manual.pdf|user manual is available here]].

==Maintenance==
Per the [[:file:Craftsman20 drill manual.pdf|user manual]], the drill should be periodically cleaned of dust, the table wiped with wax to prevent rust, and (if needed) the quill lubricated with a dry lubricant like silicone or graphite. Users should perform this maintenance as the drill is used, and PS1 should inspect the drill monthly.

===Maintenance history===

* '''July 10, 2017.''' Drill press motor is not fully connected. Belt may be rubbing on the housing.
* '''July 14, 2017.''' One of the two posts that adjusts the motor position is missing its nut. Also, there is a rack-and-pinion lever that moves the motor in and out, and one of the posts had skipped a tooth. I worked it back into position, and I believe it is now safe to use, despite the missing nut. Replacing the nut will require removing the motor, which is a two-person job.
* '''July 18, 2017.''' This is fixed now. For the record, the missing nut was M12-1.75. I put some "purple" locktite on both nuts, so hopefully we won't have to take it apart again.

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Eric Beauchamp
|Danger committee
|
|-
| [[User:andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| April 26, 2017
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Theo T
|Ralph Brendler
|11/30/2017
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Jeff Hassberger
|Ralph Brendler
|-
|Mac MacDevitt
|Paul V
|12/7/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-}

[[Category:Shop Equipment]]
[[Category:Wood Shop]]

Rockwell 14 inch bandsaw

2017-12-18T07:52:11Z

Michaeldonovan: /* List of Currently Certified Users */

== Rockwell Bandsaw ==

{{Template:EquipmentPage
|image = Rockwell-14-bandsaw.jpg
|owner = Ed Bennett
|serial = NAN
|certification = yes
|hackable = no
|model = Rockwell 14 inch bandsaw
|arrived = 1-19-13
|doesitwork = yes
|contact = ed@KineticsAndElectronics.com
|where = No longer at PS1 — all users must obtain authorization to use the new 20" bandsaw
|value = 400
|hostarea = Wood Shop
|itemphoto = [[File:Rockwell-14-bandsaw.jpg|300px]]
}}

This page is deprecated and is being kept for historical purposes, as the machine is no longer in the shop. It has been replaced by PS1's [[Rockwell Delta 20" Bandsaw]].

'''Authorizations for the [[Rockwell Delta 20" Bandsaw|20" bandsaw]] do not carry over from this machine — please contact one of the following wood shop proctors for authorization to use the new machine.'''

{{WoodshopProctors}}

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date Certified
|-
|Anna Yu
|Ed Bennett
|-
|Jay Hopkins
|Ed Bennett
|-
|Tucker Tomlinson
|Ed Bennett
|-
|Tim Saylor
|Ed Bennett
|-
|Mike Warot
|Ed Bennett
|-
|Colin Parsons
|Ed Bennett
|-
|Justin Miles
|Anna Yu
|-
|Max Stahl
|Anna Yu
|-
|Cody Greene
|Anna Yu
|-
|Zac Mitton
|Anna Yu
|-
|Stephan Kulov
|Anna Yu
|-
|Sacha De'Angeli
|Anna Yu
|-
|Michael Reddy
|Tim Saylor
|-
|Matt Triano
|Tim Saylor
|-
|Derek Bever
|Tim Saylor
|-
|Dan Willmott
|Tim Saylor
|-
|Tyler DeAngelo
|Tim Saylor
|-
|Michael Skilton
|Tucker Tomlinson
|-
|Paul Barker
|Tim Saylor
|-
|Janet Dornhoff
|Matt Triano
|-
|Hilary Lee
|Matt Triano
|-
|Will Rante
|Matt Triano
|-
|Henry Behel
|Matt Triano
|-
|Alan Livshin
|Matt Triano
|-
|Michelle Garcia
|Matt Triano
|-
|Daylan Dufelmeier
|Matt Triano
|-
|Michael Maloney
|Matt Triano
|-
|Ian Cochran
|Matt Triano
|-
|Abhimanyu Belani
|Will Rante
|-
|Dmitry Baycharov
|Matt Triano
|-
|Stephen Ulman
|Matt Triano
|-
|Jarred Meyers
|Matt Triano
|-
|Andrew Kos
|Matt Triano
|-
|Bryan Gleason
|Matt Triano
|-
|Dave Schact
|Matt Triano
|-
|Daniel Wells
|Matt Triano
|-
|Sean Corbett
|Matt Triano
|-
|Aaron Feigen
|Matt Triano
|-
|Bo Driscoll
|Matt Triano
|-
|Joel Shepherd
|Matt Triano
|-
|Santina Croniser
|Matt Triano
|-
|Todd Allen
|Matt Triano
|-
|Lawrence MacDevitt
|Matt Triano
|-
|Ryan Kelly
|Matt Triano
|-
|Melody Stanley
|Matt Triano
|-
|Tom Ackenhausen
|Matt Triano
|-
|John Godwim
|Matt Triano
|-
|Nate Hutchins
|Matt Triano
|-
|Jeff Molek
|Matt Triano
|-
|Sloan Lavery
|Matt Triano
|-
|Trey Keifer
|Matt Triano
|-
|Juan Robles
|Matt Triano
|-
|Simon Cygielski
|Matt Triano
|-
|Tom Forajter
|Matt Triano
|-
|Robert Grossman
|Matt Triano
|-
|Lucas Morris
|Matt Triano
|-
|Sergio Preston
|Matt Triano
|-
|Ron Bean
|Matt Triano
|-
|Greg Eagel
|Matt Triano
|-
|Carter Constana
|Matt Triano
|-
|Adam Glick
|Matt Triano
|-
|Zachary Fietsch
|Matt Triano
|-
|Solomon Hursey
|Matt Triano
|-
|Jesse Reynolds
|Matt Triano
|-
|Eduard Shlahtichman
|Matt Triano
|-
|Skittles Rainbow
|Matt Triano
|-
|Tom Jurgensen
|Matt Triano
|-
|Greg "Nerobro" Teiber
|Dereck Bever
|-
|Barmey Ung
|Matt Triano
|-
|Casey Olson
|Matt Triano
|-
|Jonathan Bisson
|Matt Triano
|-
|Bandit Gangwere
|Matt Triano
|-
|Joseph Nudell
|Matt Triano
|-
|David Butler
|Matt Triano
|-
|Kathryn Smiley
|Matt Triano
|-
|Aimee Spevak
|Matt Triano
|-
|Cassie Webster
|Matt Triano
|-
|Chris Moylan
|Matt Triano
|-
|Mike O'Connor
|Matt Triano
|-
|Tyler Hsu
|Matt Triano
|-
|Zihe "Johnson" Luo
|Matt Triano
|-
|Giovanni Arroyo
|Matt Triano
|-
|Edward Muela
|Anna Yu
|-
|Samuel Swope
|Anna Yu
|-
|Dan Thomson
|Jason Shanfield
|-
|Brandon Price
|Matt Triano
|-
|Arturo Duarte
|Matt Triano
|-
|Eric Braun
|Matt Triano
|-
|Jeremy Fay
|Matt Triano
|-
|Leeswann Bolden
|Matt Triano
|-
|James Porter
|Matt Triano
|-
|Jeff McBride
|Matt Triano
|-
|Tom Judge
|Anna Yu
|-
|Connor Miller
|Matt Triano
|-
|Ashley Duca
|Matt Triano
|-
|Karen Niemczyk
|Matt Triano
|-
|Bassam Alshammari
|Matt Triano
|-
|John Fiene
|Matt Triano
|-
|Thomas Wright
|Matt Triano
|-
|Joseph Peltier
|Matt Triano
|-
|Justin Conroy
|Matt Triano
|-
|David Koppel
|Matt Triano
|-
|Sevin Straus
|Matt Triano
|-
|Roger Moore
|Matt Triano
|-
|Valerie Moore
|Matt Triano
|-
|Andy Schwartz
|Matt Triano
|-
|Assaf Evron
|Matt Triano
|-
|David Pelot
|Matt Triano
|-
|Rich Smith
|Matt Triano
|-
|Khoi Nguyen
|Matt Triano
|-
|Brian Keehner
|Matt Triano
|-
|Jesse Gare
|Matt Triano
|-
|Tyler Natoli
|Matt Triano
|-
|David Siegfried
|Matt Triano
|-
|Annie Zebula
|Matt Triano
|-
|Eliya Gwetta
|Matt Triano
|-
|Patrick Schliss
|Matt Triano
|-
|Arjun Wadnerkar
|Matt Triano
|-
|Sonia Yaco
|Matt Triano
|-
|[[User:Sparr|Clarence Risher]]
|Justin Miles
|-
|Touly Phiachantharath
|Matt Triano
|-
|Matt Vibberts
|Matt Triano
|-
|Thomas Garza
|Matt Triano
|-
|Will Garza
|Matt Triano
|-
|Brennan Koziarz
|Matt Triano
|-
|Alec Weege
|Matt Triano
|-
|Eric Beauchamp
|Matt Triano
|-
|Clarence Risher
|Matt Triano
|-
|Erica Tesla
|Matt Triano
|-
|Jabu Dawdu
|Matt Triano
|-
|Karen Murphey
|Matt Triano
|-
|Matt Meshulam
|Matt Triano
|-
|Josh Myers
|Matt Triano
|-
|Weston Tanner
|Matt Triano
|-
|Hugh Sato
|Matt Triano
|-
|Nora Sluzas
|Matt Triano
|-
|Elizabeth Koprucki
|Matt Triano
|-
|Oscar Villareal
|Matt Triano
|-
|Rob Paral
|Matt Triano
|-
|Alex Schaffer
|Matt Triano
|-
|Szymon Sambor
|Matt Triano
|-
|Michael Solhelm
|Matt Triano
|-
| Rob Paral
| Michael Skilton
|-
|Sonia Yaco
|Matt Triano
|-
|[[User:lucas|Lucas Goossen]]
|Matt Triano
|-
|Marty Dubin
|Matt Triano
|-
|[[User:Mwilkens|Matt Wilkens]]
|Matt Triano
|-
|Eric Slehofer
|Matt Triano
|-
|Jon Levine
|Matt Triano
|-
|Melody Snyder
|Matt Triano
|-
|Curtis Cooke
|Matt Triano
|-
|Harry Morgan
|Matt Triano
|-
|Sam Drazin
|Matt Triano
|-
|Mike Kislovsky
|Matt Triano
|-
|Keven Kalay
|Matt Triano
|-
|Sam Reicks
|Ron Olson
|-
|Kevin Pulver
|Ron Olson
|-
|Keith Hultman
|Ron Olson
|-
|Cary Lahucik
|Ron Olson
|-
|Mario Rodriguez
|Ron Olson
|-
|John Keippel
|Ron Olson
|-
|Szilvia Precsinszki
|Ron Olson
|-
|Davis Mazariegos
|Ron Olson
|-
|Mike Coriale
|Matt Triano
|-
|Dan Baltudis
|Ron Olson
|-
|David Fell
|Ron Olson
|-
|Dubi Kaufmann
|Ron Olson
|-
|Patrick Grider
|Ron Olson
|-
|Erin Kunkel
|Matt Triano
|-
|Tyler Matthew
|Matt Triano
|-
|Shae Kurko
|Matt Triano
|-
|Ben Bogler
|Matt Triano
|-
|Sam Paris
|Matt Triano
|-
|Chris Kleehammer
|[[User:jason|Jason Shanfield]]
|-
|Trey Elliott
|[[User:jason|Jason Shanfield]]
|-
|Nik Brink
|[[User:jason|Jason Shanfield]]
|-
|Frances Ritchie
|Ron Olson
|-
|Ben Kern
|Ron Olson
|-
|Eric Yu
|Ron Olson
|-
|Knute Martell
|Ron Olson
|-
|Karol Slowikowski
|Ron Olson
|-
|Chris Smith
|Ron Olson
|-
|Eugene Liokumovich
|Ron Olson
|-
|Laurel Garrett
|Matt Triano
|-
|Rei Kevin
|Matt Triano
|-
|Aji Slater
|Matt Triano
|-
|John Beyer
|Matt Triano
|-
|Brad Topol
|Matt Triano
|-
|Ryan Neuman
|Matt Triano
|-
|[[User:papaben44|Benjamin Dambman]]
|Matt Triano
|4/14/2015
|-
|Tomas Ward
|Ron Olson
|4/26/2015
|-
|Les Schier
|Jason Shanfield
|5/2/15
|-
|Hunter Koerner
|Eric Beauchamp
|6/4/15
|-
|Kurt Ziegel
|Eric Beauchamp
|6/4/15
|-
|Simon Pyle
|Eric Beauchamp
|6/4/15
|-
|Andy Richardson
|Matt Triano
|4/14/15
|-
|Connor Jansen
|Eric Beauchamp
|6/4/15
|-
|Erik Wessing
|Eric Beauchamp
|-
|Ananda Stevens
|Eric Beauchamp
|7/18/15
|-
|Mark Stevens
|Eric Beauchamp
|7/18/15
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|Ralph Brendler
|Eric Beauchamp
|8/27/2015
|-
|Kyle Bieneman
|Eric Beauchamp
|8/27/2015
|-
|Shane Kanter
|Ron Olson
|9/12/2015
|-
|Jim Baker
|Eric Beauchamp
|8/27/2015
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Hans Griese
|Andy Larkin
|5/5/16
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|An Phan
|Andy Larkin
|7/7/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|Derwin Umali
|Andy Larkin
|8/7/16
|-
|Ashley Borg
|Andy Larkin
|4/11/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|Abel Greenwald
|Andy Larkin
|
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|Jeff Hassberger
|Ralph Brendler
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-}

[[Category:Wood Shop]]
[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Loaned Equipment]]

Rockwell Delta 20" Bandsaw

2017-12-18T07:51:38Z

Michaeldonovan: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner = Pumping Station:One
|hostarea = Wood Shop
|certification = yes
|hackable = no
|model = 28-350
|serial = 1457257
|arrived = 8/26/15
|where = Wood Shop
|doesitwork = yes
|contact = matt . triano @ gmail . com
|value = $1,000
|image = RockwellDelta20Bandsaw.jpg
}}

==Notes==
manual: [[File:Rockwell-28-350.pdf]]
related manual with more details: [[File:Rockwell20bandsaw.pdf]]
===Authorizations for the 14" Rockwell do not carry over to this tool===
This tool requires authorization for use. Please see an authorized proctor below.

=== Consumable Parts ===
This saw takes 141" blades.

==Tips on Use==

This section is based on a [https://groups.google.com/forum/#!msg/pumping-station-one/rCix6WMMS4Q/S6Ds9sO7DAAJ discussion that took place on the mailing list].

Band-saws have two main uses in the wood shop:

# The primary use is to make curved cuts in a piece of flat wood. In this case the piece is held by hand and guided so the blade follows the curve. A fence is counterproductive for this use.
# The second is resawing lumber that is too thick for the table saw. This is typically, but not exclusively, done with valuable pieces of wood for the purpose of creating a veneer. A fence may be appropriate for this use.

With a bandsaw, you basically never want to have the fence locked parallel to the blade. Every blade will have some degree of drift, and it is necessary to accommodate this drift to achieve a straight cut. There are two common solutions: single-point fences, and adjustable angle fences. PS:1 has both a nice magnetic adjustable fence and a single-point fence that attaches to it.

With a single point fence, you adjust for the drift angle by eye as you cut. This quick and easy method is most appropriate for resawing of narrower boards with a width of 6" or less.

For wider boards, use the adjustable fence with a tall secondary fence attached, carefully adjusted to the drift angle of the blade. For really wide boards, you can also use a presser-board to ensure contact with the fence.

Some additional advice on resawing:

* Buy a nice blade and learn how to install and adjust it. The PS:1 blades are often fairly dull and don't track well.
* Make sure your stock is prepared well, with at least one flat face and one square and flat edge.
* Try to keep only 3-10 teeth in the wood. A 1.5 tpi blade is appropriate for most resawing.
* Use a skip-tooth blade, at least 1" wide (but see note below).

Although wide blades are best for resawing, using 1" blades on the Rockwell is a challenge. The carter blade guides are difficult to adjust, and 1" is the borderline of their capacity. Adjust them so that the back of the blade runs against the support bearing, rather than digging into the frame of the blade guide. This adjustment is particularly difficult on the lower guide. If you do allow the blade to dig into the blade guide, it may be difficult to detect the mistake. The saw will run fine, even though the frame of the lower guide is pushing the blade forward. There won't necessarily be any telltale noises or tracking problems. The only indications of a problem may be that the back of the blade starts to get hot from friction and will discolor as it picks up resins from the wood.

For even wider blades, it is necessary to remove the lower guide completely. Although not an ideal set-up, if the top guide is adjusted properly and the feed rate is reasonable, it cuts well.

{{WoodshopProctors}}

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Keon Turner
|Ron Olson
|-
|Hunter Koerner
|Eric Beauchamp
|-
|Deanna Williams
|Eric Beauchamp
|-
|Burton Kent
|Eric Beauchamp
|-
|Casey Olson
|Jason Shanfield
|-
|Tom Judge
|Matt Triano
|-
|Jeff Smykil
|(Pending confirmation)
|-
|Anna Yu
|Matt Triano
|-
|Jon Levine
|Jason Shanfield
|-
|Kyle Bieneman
|Eric Beauchamp
|-
|Niko Hawley
|Eric Beauchamp
|-
|Kevin Mitchell
|Eric Beauchamp
|-
|Adam Moffatt
|Jason Shanfield
|-
|Peter Letscher
|Eric Beauchamp
|11/05/15
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Shine Chen
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/04/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|Thomas Ward
|Andy L.
|11/18/2015

|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Chris Kohl
|Eric Beauchamp
|1/8/2016
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Shelly Loke-Gayares
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Sam Paris
|Eric Beauchamp
|1/28/16
|-
|Craig Koszewski
|Eric Beauchamp
|1/28/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Brian Cuocci
|Andy L
|3/17/16
|-
|Julie Zwolinski
|Eric Beauchamp
|3/24/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Colin Campbell
|Andy L
|5/5/16
|-
|Ken Burkhardt
|Andy Larkin
|5/5/16
|-
|Hans Griese
|Andy Larkin
|5/5/16
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Ian Monroe
|Eric Beauchamp
|5/19/16
|-
|An Phan
|Andy Larkin
|7/7/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|Derwin Umali
|Andy Larkin
|8/7/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Joe Dowling
|Ken Burkhardt
|8/15/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|[[user:guijemont|Guillaume Emont]]
|Ken Burkhardt
|9/19/16
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Revant Ohri
|Andy L
|9/15/16
|-
|Aaron Mintz
|Ken Burkhardt
|10/17/16
|-
|Brian Carstensen
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|Robert Richardson
|Ken Burkhardt
|10/17/16
|-
|Ryan Fiebing
|Ken Burkhardt
|10/24/16
|-
|Jack Berg
|Ken Burkhardt
|11/07/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Bruce Mace
|Eric Beauchamp
|02/20/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|Crystal Morales
|Andy Larkin
|2017-03-16
|-
|Jason Pittman
|Andy Larkin
|2017-03-16
|-
|Sam Chen
|Andy Larkin
|-
|Abel Greenwald
|Andy Larkin
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Molly Adamski
|Ralph Brendler
|4/27/17
|-
|Shabab Mustafa
|Ralph Brendler
|4/27/17
|-
|Adomas Tautkus
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|David Earl
|Ralph Brendler
|5/4/17
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Luis Colmenares
|Ralph Brendler
|6/1/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Zack Sasnow
|Paul Van Lake
|8/3/2017
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Joanna C.
|Sam O.
|9/27/17
|-
|Mark Haughey
|Sevin Straus
|9/30/17
|-
|Jacqueline Villa
|Maria Miller
|10/3/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Corey Toyama
|Ralph Brendler
|11/30/2017
|-
|Theo T
|Ralph Brendler
|11/30/2017
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Jeff Hassberger
|Ralph Brendler
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Mac MacDevitt
|Paul V
|12/7/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-}

[[Category:Wood Shop]]
[[Category:Shop Equipment]]

SawStop table saw

2017-12-18T07:51:08Z

Michaeldonovan: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner = PS:One
|certification=yes
|hackable = NO
|model = Model PCS31230 3.0HP 220V
|serial = NA
|arrived = 9/1/2012
|doesitwork = yes
|contact = Wood Shop Area Host
|where = Wood Shop
|value = $3,000.00
|image = SawStop.jpg
|hostarea = Wood Shop
}}
[[File:Saw stop badge.jpg|thumb|right|200px]]

= Authorization for this tool by authorized proctors only =
== Authorized Proctors ==
{| class="wikitable" border="1"
|-
|Matt Triano
|-
|Jason Shanfield
|-
|Ron Olson
|-
|Eric Beauchamp
|-
|Andy Larkin
|-
|Ken Burkhardt
|-
|Ralph Brendler
|-
|Paul VanLake
|}

== Status ==

Repaired and in working order as of 11/9/2015

== How to Become an Authorized Proctor ==

Contact Wood Shop Area Host Eric Beauchamp.

= Rules =
# Do not move the machine ever.
# Never use the table as a work surface.
# Always have the dust collection on. Turn it on before you plug in the saw and off after you unplug the saw.
# Always check your material on the blade before you spin up the blade. If the light turns red, DO NOT CUT.
# Always check your wood for nails or staples. If you're not sure, check the entire piece with a magnet.
# If you break something, or damage the saw, contact the area host immediately. Don't let others do more damage or hurt themselves by using a broken tool.
# Always dust the entire machine when you are done. Also check the motor compartment after every use and vacuum out as needed.

= Additional Information =

== Dado Stack ==
Dado stack use requires separate authorization.

SawStop saws support 8″ dado sets only. The optional dado brake cartridge must be used for dado cuts. It has a larger brake pawl designed to stop the multiple blades in a dado set. In addition, you will also need to use a zero-clearance insert specifically for the dado set.

http://www.rockler.com/sawstop-dado-brake-cartridge-for-cns-table-saws

== Blade Brake ==
This saw is equipped with a safety feature that will (hopefully) stop the blade when it contacts something conductive-- like your hand. However, that means you normally can't cut conductive things with this saw or you will trigger the safety brake. This is good if it was your hand in the way, but it also destroys the sawblade and requires installation of a replacement part that costs $70+ every time. And the saw will be down until the replacement can be installed.

According to the owner's manual: "Conductive materials such as aluminum and other metals, carbon fiber materials, '''mirrored acrylic''', carbon-filled materials, etc. will typically '''cause the brake to activate'''." [Emphasis added.]

Other things that may trigger the brake include wet wood, and wood with embedded nails or staples. Lexan and green pressure-treated wood reportedly can also be a problem. That is why the rules instruct you to check your material on the side of the blade before spinning it up, and to check your wood for nails or staples!

== Notes ==
* There's an m8 hole drilled and tapped in the mitre gauge. The post from a magnetic base of our dial indicators thread in. The post may require a spacer so the threads don't stick out (use a stack of washers or a larger-than-m8 nut).
* The right hand table adjusting screw was bent while aligning the table. The table was aligned without it. Aligning the arbor tilt axis will be *really tough* without a replacement. (Part #11 in the cabinet and table exploded diagram in the manual p98)
* The rear rip fence rail has places to put 4 countersunk allen bolts. The left hand bolt screwed into the main table was too long and made contact with an internal table part (probably the rear trunion). It probably pushed the table out of alignment and caused binding while re-aligning the table. That bolt was left out. Don't replace it!

== Training Links ==
* [http://www.sawstop.com/images/uploads/manuals/PCS%20Owners%20Manual%20Model%20PCS31230%20V5.0%2009-13.pdf Owner's Manual]

== Maintenance ==
* [http://web.archive.org/web/20130224091815/http://www.woodworkersjournal.com/Main/Articles/Table_Saw_Maintenance_Skill_Builder_Power_Tool_Tun_8197.aspx Table Saw Maintenance]
* [[SawStop Table Saw maintenance|maintenance page]]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Shawn Blaszak
|Danger Committee
|-
|[[User:Meistertek|Dan Meyer]]
|Sean Blaszak
|-
|Jacob Ginsburg
|Shawn Blaszak
|-
|Eric Stein
|Steve Finkelman / Danger Committee
|-
|[[User:Dee|Dee Newcum]]
|Shawn Blaszak
|-
|Ryan Pierce
|Shawn Blaszak
|-
|Tucker Tomlinson
|Shawn Blaszak
|-
|Adrianna McKinley
|Danger Committee
|-
|Anthony Barker
|Adrianna McKinley
|-
|Avner Shanan
|Adrianna McKinley
|-
|Colin Parsons
|Adrianna McKinley
|-
|Dan Denby
|Adrianna McKinley
|-
|Dillon Gray
|Adrianna McKinley
|-
|Douglas Savitsky
|Adrianna McKinley
|-
|Hailey Willis
|Adrianna McKinley
|-
|Jeremy Bloyd-Peshkin
|Adrianna McKinley
|-
|Jeremy Kay
|Adrianna McKinley
|-
|Jessica Cobb
|Adrianna McKinley
|-
|Jordan Bunker
|Adrianna McKinley
|-
|Kori Rays
|Adrianna McKinley
|-
|Patrick Callahan
|Adrianna McKinley
|-
|Ryan Brandys
|Adrianna McKinley
|-
|Shawn Blaszak
|Adrianna McKinley
|-
|Steve Farkas
|Adrianna McKinley
|-
|Steve Finkleman
|Adrianna McKinley
|-
|Mike Warot
|Adrianna McKinley
|-
|Eric Stein/Toba
|Adrianna McKinley
|-
|Ryan Pierce
|Adrianna McKinley
|-
|Geoffrey Topham
|Adrianna McKinley
|-
|Tim Saylor
|Ryan Pierce
|-
|Hailey Willis
|Tim Saylor
|-
|James Longfield
|Tim Saylor
|-
|Liam Tuohy
|Tim Saylor
|-
|Jim Tuohy
|Tim Saylor
|-
|Sean Nixon
|Tim Saylor
|-
|Michael Reddy
|Tim Saylor
|-
|Matt Triano
|Tim Saylor
|-
|Derek Bever
|Tim Saylor
|-
|Dan Willmott
|Tim Saylor
|-
|Tyler DeAngelo
|Tim Saylor
|-
| Michael Skilton
| Adrianna McKinley
|-
| Dean Anderson
| Tim Saylor
|-
|Kathy Whisler
|Tucker Tomlinson
|-
| João Santos
| Geoffrey Topham
|-
|David Fell
|Tucker Tomlinson
|-
|[[User:Bikemandan|Dan Locks]]
|Adrianna McKinley
|-
|Dave Earley
|[[User:Bikemandan|Dan Locks]]
|-
| Boban Nikolic
| Michael Skilton
|-
| Madeleine Klichowski
| Tim Saylor
|-
| Lyn Cole
| Tim Saylor
|-
| Nathan Becka
| Tim Saylor
|-
| Brian Carstensen
| Tim Saylor
|-
| Eric Veggeberg
| Tim Saylor
|-
| George Shaw
| Tim Saylor
|-
|Janet Dornhoff
|Matt Triano
|-
|Hilary Lee
|Matt Triano
|-
|Will Rante
|Matt Triano
|-
|Henry Behel
|Matt Triano
|-
|Alan Livshin
|Matt Triano
|-
|Michelle Garcia
|Matt Triano
|-
|Daylan Dufelmeier
|Matt Triano
|-
|Michael Maloney
|Matt Triano
|-
|Ian Cochran
|Matt Triano
|-
|Abhimanyu Belani
|Will Rante
|-
|Justin Miles
|Adrianna McKinley
|-
|Dmitry Baycharov
|Matt Triano
|-
|Stephen Ulman
|Matt Triano
|-
|Jarred Meyers
|Matt Triano
|-
|Andrew Kos
|Matt Triano
|-
|Bryan Gleason
|Matt Triano
|-
|Jason Sharfield
|Matt Triano
|-
|Dave Schact
|Matt Triano
|-
|Daniel Wells
|Matt Triano
|-
|Sean Corbett
|Matt Triano
|-
|Aaron Feigen
|Matt Triano
|-
|Bo Driscoll
|Matt Triano
|-
|Joel Shepherd
|Matt Triano
|-
|Santina Croniser
|Matt Triano
|-
|Todd Allen
|Matt Triano
|-
|Lawrence MacDevitt
|Matt Triano
|-
|Ryan Kelly
|Matt Triano
|-
|Melody Stanley
|Matt Triano
|-
|Tom Ackenhausen
|Matt Triano
|-
|JJ Sciappa
|Jason Shanfield
|-
|Jason Araujo
|Derek Bever
|-
|John Godwim
|Matt Triano
|-
|Jeff Molek
|Matt Triano
|-
|Nathan Ellis
|Jason Shanfield
|-
|Sloan Lavery
|Matt Triano
|-
|Trey Keifer
|Matt Triano
|-
|Juan Robles
|Matt Triano
|-
|Simon Cygielski
|Matt Triano
|-
|Tom Forajter
|Matt Triano
|-
|Robert Grossman
|Matt Triano
|-
|Lucas Morris
|Matt Triano
|-
|Sergio Preston
|Matt Triano
|-
|Ron Bean
|Matt Triano
|-
|Greg Eagel
|Matt Triano
|-
|Carter Constana
|Matt Triano
|-
|Adam Glick
|Matt Triano
|-
|Zachary Fietsch
|Matt Triano
|-
|Solomon Hursey
|Matt Triano
|-
|Jesse Reynolds
|Matt Triano
|-
|Eduard Shlahtichman
|Matt Triano
|-
|Skittles Rainbow
|Matt Triano
|-
|Tom Jurgensen
|Matt Triano
|-
|Barmey Ung
|Matt Triano
|-
|Casey Olson
|Matt Triano
|-
|Jonathan Bisson
|Matt Triano
|-
|Ed Bennett
|Matt Triano
|-
|Anna Yu
|Matt Triano
|-
|Bandit Gangwere
|Matt Triano
|-
|Joseph Nudell
|Matt Triano
|-
|David Butler
|Matt Triano
|-
|Kathryn Smiley
|Matt Triano
|-
|Aimee Spevak
|Matt Triano
|-
|Cassie Webster
|Matt Triano
|-
|Chris Moylan
|Matt Triano
|-
|Mike O'Connor
|Matt Triano
|-
|Tyler Hsu
|Matt Triano
|-
|Zihe "Johnson" Luo
|Matt Triano
|-
|Giovanni Arroyo
|Matt Triano
|-
|Ian McLeod
|Derek Bever
|-
|Dan Thomson
|Jason Shanfield
|-
|Brandon Price
|Matt Triano
|-
|Arturo Duarte
|Matt Triano
|-
|Eric Braun
|Matt Triano
|-
|Jeremy Fay
|Matt Triano
|-
|Leeswann Bolden
|Matt Triano
|-
|James Porter
|Matt Triano
|-
|Jeff McBride
|Matt Triano
|-
|Connor Miller
|Matt Triano
|-
|Ashley Duca
|Matt Triano
|-
|Karen Niemczyk
|Matt Triano
|-
|Bassam Alshammari
|Matt Triano
|-
|John Fiene
|Matt Triano
|-
|Thomas Wright
|Matt Triano
|-
|Tom Judge
|Jason Shanfield
|-
|Joseph Peltier
|Matt Triano
|-
|Justin Conroy
|Matt Triano
|-
|David Koppel
|Matt Triano
|-
|Sevin Straus
|Matt Triano
|-
|Roger Moore
|Matt Triano
|-
|Valerie Moore
|Matt Triano
|-
|Andy Schwartz
|Matt Triano
|-
|Assaf Evron
|Matt Triano
|-
|David Pelot
|Matt Triano
|-
|Rich Smith
|Matt Triano
|-
|Khoi Nguyen
|Matt Triano
|-
|Brian Keehner
|Matt Triano
|-
|Jesse Gare
|Matt Triano
|-
|Tyler Natoli
|Matt Triano
|-
|David Siegfried
|Matt Triano
|-
|Annie Zebula
|Matt Triano
|-
|<strike>Eliya Gwetta</strike>
|Matt Triano
|-
|Patrick Schliss
|Matt Triano
|-
|Arjun Wadnerkar
|Matt Triano
|-
|Alec Weege
|Matt Triano
|-
|Sonia Yaco
|Matt Triano
|-
|Tom Bossier
|Jason Shanfield
|-
|Ray Doeksen
|Jason Shanfield
|-
|Touly Phiachantharath
|Matt Triano
|-
|Matt Vibberts
|Matt Triano
|-
|Thomas Garza
|Matt Triano
|-
|Will Garza
|Matt Triano
|-
|Brennan Koziarz
|Matt Triano
|-
|Eric Beauchamp
|Matt Triano
|-
|Clarence Risher
|Matt Triano
|-
|Erica Tesla
|Matt Triano
|-
|Jabu Dawdu
|Matt Triano
|-
|Karen Murphey
|Matt Triano
|-
|Matt Meshulam
|Matt Triano
|-
|Josh Myers
|Matt Triano
|-
|Weston Tanner
|Matt Triano
|-
|Hugh Sato
|Matt Triano
|-
|Nora Sluzas
|Matt Triano
|-
|Elizabeth Koprucki
|Matt Triano
|-
|Oscar Villareal
|Matt Triano
|-
|Rob Paral
|Matt Triano
|-
|Alex Schaffer
|Matt Triano
|-
|Szymon Sambor
|Matt Triano
|-
|Michael Solhelm
|Matt Triano
|-
| Rob Paral
| Michael Skilton
|-
| Sonia Yaco
| Matt Triano
|-
| Alyssa Moxley
| Ron Olson
|-
| Kyle Bieneman
| Ron Olson
|-
|Steve Ioannou
|Matt Triano
|-
|[[User:Mwilkens|Matt Wilkens]]
|Matt Triano
|-
|Eric Slehofer
|Matt Triano
|-
|Jon Levine
|Matt Triano
|-
|Melody Snyder
|Matt Triano
|-
|Curtis Cooke
|Matt Triano
|-
|Harry Morgan
|Matt Triano
|-
|Lucas Goossen
|Matt Triano
|-
|Sam Drazin
|Matt Triano
|-
|Mike Kislovsky
|Matt Triano
|-
|Keven Kalay
|Matt Triano
|-
|Jacob Rush
|Ron Olson
|-
|Sam Reicks
|Ron Olson
|-
|Kevin Pulver
|Ron Olson
|-
|Keith Hultman
|Ron Olson
|-
|Cary Lahucik
|Ron Olson
|-
|John Keippel
|Ron Olson
|-
|Mario Rodriguez
|Ron Olson
|-
|Szilvia Precsinszki
|Ron Olson
|-
|Davis Mazariegos
|Ron Olson
|-
|Pete Noverini
|Matt Triano
|-
|Mike Coriale
|Matt Triano
|-
|Dan Baltudis
|Ron Olson
|-
|Viktor Bazarov
|Ron Olson
|-
|Roman Solomatov
|Ron Olson
|-
|Patrick Grider
|Ron Olson
|-
|Dubi Kaufmann
|Ron Olson
|-
|Erin Kunkel
|Matt Triano
|-
|Tyler Matthew
|Matt Triano
|-
|Shae Kurko
|Matt Triano
|-
|Ben Bogler
|Matt Triano
|-
|Rod McLah
|Ron Olson
|-
|Andrew Dreasler
|Ron Olson
|-
|Sam Paris
|Matt Triano
|-
|Chris Kleehammer
|[[User:jason|Jason Shanfield]]
|-
|Trey Elliott
|[[User:jason|Jason Shanfield]]
|-
|Nik Brink
|[[User:jason|Jason Shanfield]]
|-
|Frances Ritchie
|Ron Olson
|-
|Ben Kern
|Ron Olson
|-
|Knute Martell
|Ron Olson
|-
|Eric Yu
|Ron Olson
|-
|Knute Martell
|Ron Olson
|-
|Bob McGrath
|Ron Olson
|-
|Karol Slowikowski
|Ron Olson
|-
|Michelle Deleon
|Ron Olson
|-
|Chris Smith
|Ron Olson
|-
|Benjamin Miller
|Ron Olson
|-
|Jennie P
|Ron Olson
|-
|Joe Wallace
|Ron Olson
|-
|Eugene Liokumovich
|Ron Olson
|-
|Laurel Garrett
|Matt Triano
|-
|Rei Kevin
|Matt Triano
|-
|Aji Slater
|Matt Triano
|-
|John Beyer
|Matt Triano
|-
|Jay Kasturi
|Ron Olson
|-
|Ryan Neuman
|Ron Olson
|-
|[[User:papaben44|Benjamin Dambman]]
|Matt Triano
|4/14/2015
|-
|Tomas Ward
|Ron Olson
|4/26/2015
|-
|Les Schier
|Jason Shanfield
|5/2/15
|-
|Mike Jones
|Matt Triano
|5/12/15
|-
|Hunter Koerner
|Eric Beauchamp
|6/4/15
|-
|Kurt Ziegel
|Eric Beauchamp
|6/4/15
|-
|Simon Pyle
|Eric Beauchamp
|6/4/15
|-
|Andy Richardson
|Matt Triano
|4/14/15
|-
|Connor Jansen
|Eric Beauchamp
|6/4/15
|-
|Raj Perera
|Matt Triano
|-
|Matt Crump
|Jason Shanfield
|7/1/15
|-
|Erik Wessing
|Eric Beauchamp
|-
|Ananda Stevens
|Eric Beauchamp
|7/18/15
|-
|Mark Stevens
|Eric Beauchamp
|7/18/15
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|Jim Baker
|Eric Beauchamp
|8/27/2015
|-
|Ralph Brendler
|Eric Beauchamp
|8/27/2015
|-
|Bruce McConachie
|Eric Beauchamp
|8/27/2015
|-
|Shane Kanter
|Ron Olson
|9/10/2015
|-
|Burton Kent
|Ron Olson
|9/10/2015
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|Deanna Williams
|Eric Beauchamp
|-
|Jeff Smykil
|Matt Triano
|9/26/2015
|-
|Glenn Powers
|Matt Triano
|3/2015
|-
|Niko Hawley
|Eric Beauchamp
|-
|Kevin Mitchell
|Eric Beauchamp
|-
|John McDonald
|Eric Beauchamp
|10/05/2015
|-
|[[User:themoffatt|Adam Moffatt]]
|Eric Beauchamp
|10/22/2015
|-
|Jean Michel Crettaz
|Eric Beauchamp
|10/22/2015
|-
|Mike Mandrea
|Eric Beauchamp
|11/05/2015
|-
|-Caleb Young
|-Eric Beauchamp
|-
|Peter Letscher
|Eric Beauchamp
|11/05/15
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Shine Chen
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/04/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Chris Kohl
|Eric Beauchamp
|1/8/2016
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Craig Koszewski
|Eric Beauchamp
|1/28/16
|-
|Amner Castillo
|Eric Beauchamp
|2/26/16
|-
|Christopher Carson
|Eric Beauchamp
|2/26/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Jared K.
|Eric Beauchamp
|3/10/16
|-
|Mark Zumwalt
|Andy Larkin
|3/17/16
|-
|Adriana Garcia
|Eric Beauchamp
|3/24/16
|-
|Julie Zwolinski
|Eric Beauchamp
|3/24/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Greg "Nerobro" Teiber
|Dan Locks
|4/29/16
|-
|Ken Burkhardt
|Andy Larkin
|5/5/16
|-
|Colin Campbell
|Andy Larkin
|5/5/16
|-
|Hans Griese
|Andy Larkin
|5/5/16
|-
|Spencer Simms
|Eric Beauchamp
|05/19/2016
|-
|Adam Stein
|Andy Larkin
|4/14/2016
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Ian Monroe
|Eric Beauchamp
|5/19/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
|Jim Brink
|Andy Larkin
|07/21/16
|-
|Donald Wells
|/Andy Larkin
|8/4/16
|-
|Derwin Umali
|Andy Larkin
|08/04/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Joe Dowling
|Ken Burkhardt
|08/15/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|Brian Cuocci
|Andy L
|9/15/16
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Revant Ohri
|Andy L
|9/15/16
|-
|Aaron Mintz
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|-
|Robert Richardson
|Ken Burkhardt
|10/17/16
|-
|Ryan Fiebing
|Ken Burkhardt
|10/24/16
|-
|Jack Berg
|Ken Burkhardt
|11/07/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Matt Schaid
|Andy Larkin
|01/05/17
|-
|Jamie Vollmer
|Andy Larkin
|01/05/17
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Bruce Mace
|Eric Beauchamp
|02/20/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|Crystal Morales
|Andy Larkin
|2017-03-16
|-
|Jason Pittman
|Andy Larkin
|2017-03-16
|-
|Sam Chen
|Andy Larkin
|-
|Abel Greenwald
|Andy Larkin
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Molly Adamski
|Ralph Brendler
|4/27/2017
|-
|Shabab Mustafa
|Ralph Brendler
|4/27/17
|-
|Adomas Tautkus
|Ralph Brendler
|4/27/17
|-
|Brett Sanderson
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|David Earl
|Ralph Brendler
|5/4/2017
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Luis Colmenares
|Ralph Brendler
|6/1/17
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Andrew Wingate
|Jason Shanfield
|7/22/17
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Dan Kim
|Ralph Brendler
|9/21/17
|-
|Mark Haughey
|Sevin Straus
|9/30/17
|-
|Jacqueline Villa
|Maria Miller
|10/3/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/9/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Corey Toyama
|Ralph Brendler
|11/30/2017
|-
|Theo T
|Ralph Brendler
|11/30/2017
|-
|Jeff Hassberger
|Ralph Brendler
|11/2/17
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Mac MacDevitt
|Paul V
|12/7/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-}

[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Wood Shop]]
[[Category:Certification Clarification Needed]]

Grizzly 6" jointer

2017-12-18T07:50:31Z

Michaeldonovan: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner = PS1
|certification=yes
|hackable = NO
|model = G0654
|serial = NA
|arrived = Sept 2013
|doesitwork = no
|contact = Wood Shop Area Host
|where = Wood Shop
|value = $525.00
|hostarea = Wood Shop
|image = Jointer.jpg
}}

== Status ==
Offline until repaired. If you want to be notified when the jointer is back in service, edit this page and leave your email address or whatever means of contact you prefer, here.

Recently purchased from Matt Triano for a song. Thank you for everything, Matt!

Spring of guard is broken. Still usable, but should be repaired.

'''This tool requires authorization for use.'''

{{WoodshopProctors}}

== Rules ==
# Always check your wood for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet.
# Remove the smallest amount of material possible and feed it at an appropriate speed. More passes are better than fewer. If you don't know how to properly adjust the infeed table, ask for help.
# Always use the vacuum while running the jointer. Otherwise, it will clog with chips.
# If you break something, or damage the tool, contact the area host immediately. Don't let others do more damage to the machine, ruin their work, or hurt themselves by using a broken tool.
# Always vacuum the machine, cutting area, and the table around the machine when you are done.

== Documentation ==
* [http://cdn0.grizzly.com/manuals/g0654_m.pdf Manual]
* [http://cdn0.grizzly.com/partslists/g0654_pl.pdf Parts List]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Matt Triano
|Owner
|
|-
|Marcin Ignasiak
|Eric Beauchamp
|
|-
|Jason Shanfield
|Matt Triano
|
|-
|Sam Drazin
|Matt Triano
|
|-
|Eric Beauchamp
|Matt Triano
|
|-
|Ryan Pierce
|Matt Triano
|
|-
|Pete Noverini
|Matt Triano
|
|-
|Mike Coriale
|Matt Triano
|
|-
|Will Garza
|Matt Triano
|
|-
|Chris Kleehammer
|[[User:jason|Jason Shanfield]]
|
|-
|Trey Elliott
|[[User:jason|Jason Shanfield]]
|
|-
|Nik Brink
|[[User:jason|Jason Shanfield]]
|
|-
|Bradley Topol
|Matt Triano
|
|-
|Mike Jones
|Matt Triano
|
|-
|Ray Doeksen
|[[User:jason|Jason Shanfield]]
|
|-
|Hunter Koerner
|Eric Beauchamp
|
|-
|Casey Olson
|Matt Triano
|
|-
|Eugene Liokumovich
|Matt Triano
|
|-
|Jeff Smykil
|Matt Triano
|
|-
|Scott Merrell
|Eric Beauchamp
|
|-
|Erik Wessing
|Eric Beauchamp
|
|-
|Glenn Trussell
|Eric Beauchamp
|
|-
|David Gutowsky
|Eric Beauchamp
|
|-
|Szymon Sambor
|Eric Beauchamp
|9/3/15
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/15
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/15
|-
|Shine Chen
|Eric Beauchamp
|11/19/15
|-
|Mike Forkan
|Eric Beauchamp
|11/19/15
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/15
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/15
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/15
|-
|Chris Kohl
|Andy Larkin
|1/21/16
|-
|Ian McGrath
|Andy Larkin
|1/21/16
|-
|Amner Castillo
|Eric Beauchamp
|2/26/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Colin Campbell
|Andy L
|5/5/16
|-
|Hans Griese
|Andy L
|5/5/16
|-
|Daniel Sojka
|Andy L
|
|-
|Ken Burkhardt
|Andy Larkin
|5/5/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
|Jim Brink
|Andy Larkin
|07/21/16
|-
|Derwin Umali
|Andy Larkin
|8/7/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|8/4/16
|-
|Joe Dowling
|Ken Burkhardt
|8/15/16
|-
|Simon Pyle
|Andy Larkin
|
|-
|Matt Meshulam
|Jason Shanfield
|8/24/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|Brian Cuocci
|Andy Larkin
|9/15/16
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Revant Ohri
|Andy L
|9/15/16
|-
|Sam Paris
|Ken Burkhardt
|
|-
|Aaron Mintz
|Ken Burkhardt
|10/17/16
|-
|Brian Carstensen
|Ken Burkhardt
|10/17/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Robert Richardson
|Ken Burkhardt
|10/17/16
|-
|Ryan Fiebing
|Ken Burkhardt
|10/24/16
|-
|Jack Berg
|Ken Burkhardt
|11/07/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Matt Schaid
|Andy Larkin
|01/05/17
|-
|Jamie Vollmer
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Chris Ruhland
|Andy Larkin
|01/19/17
|-
|Bruce Mace
|Eric Beauchamp
|02/20/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|Crystal Morales
|Andy Larkin
|3/16/17
|-
|Jason Pittman
|Andy Larkin
|3/16/17
|-
|Ashley Borg
|Andy Larkin
|4/13/17
|-
|Sam Chen
|Andy Larkin
|
|-
|Brett Sanderson
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|Andrew Vaughan
|Andy Larkin
|4/25/17
|-
|David Earl
|Ralph Brendler
|5/4/17
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Luis Colmenares
|Ralph Brendler
|6/1/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|Danielle MacDonald
|Ralph Brendler
|6/29/17
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Justin Pestka
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Mark Haughey
|Sevin Straus
|9/30/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/20/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/2/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Tee
|Paul V
|11/09/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-
|Corey Toyama
|Ralph Brendler
|11/30/2017
|-
|Theo T
|Ralph Brendler
|11/30/2017
|-
|Wally Ibrahim
|Ralph Brendler
|11/30/17
|-
|Jeff Hassberger
|Ralph Brendler
|11/2/17
|-
|Mac MacDevitt
|Paul V
|12/7/17
|-
|Ben Starett
|Ralph Brendler
|12/14/17
|-
|Ross Hanchett
|Ralph Brendler
|12/14/17
|-
|Michael Donovan
|Ralph Brendler
|12/14/17
|-}

[[Category:Shop Equipment]]
[[Category:Wood Shop]]
[[Category:Loaned Equipment]]