PS:1 Wiki Dev - User contributions [en]

2026 Network Re-architecture

2026-03-31T12:16:00Z

Muirrum: /* Where We're Going */

== Foreword ==
Our current network topology is the legacy of my early days of learning networking and best practices. In the 8 years since I've become CTO, I've learned many things. While our networking config has worked up until now, it leaves a lot to be desired. - Sky, CTO in 2026.

== Summary ==

=== Project Team ===
* Sky: "Project Manager" and whatever else.
* Cara: Technical Lead
* James: Physical Infrastructure

=== Where We Are ===
The PS:One network is kinda wonky. We have a bunch of subnets that were setup with the naming convention 10.[VLAN-ID].X.X. While this works, it is not best practice and a bit silly looking. We're relying on Active Directory for DNS and DHCP on a lot of critical networks. This creates a bootstrap issue with the network where things don't work until AD has booted. Having AD play such a critical role in our network when most of our members are familiar with Linux does not make sense and creates a poor experience.

=== Where We're Going ===
Our 2026 network re-architecture project has three major goals and a few secondary goals:

Major Goals:

# VLAN / DHCP Rework
## VLANs will be formatted with the naming convention '''10.19.[VLAN-ID].X''' with 19 being PS:One's site ID (35'''19''')
## DHCP will be fully taken away from Active Directory and migrated to the Unifi equipment.
## Stretch goal: DHCP managed by IaC (infrastructure-as-code) solution.
# DNS Rework
## DNS will be taken away from Active Directory on most VLANs.
## Active Directory will continue manage DNS on the VLAN where space computers reside since that's what AD likes.
## AD DNS will be replaced with another solution. Ideally an IaC (infrastructure-as-code) managed solution that is easier for the membership to access and understand.
# AD Isolation
## Active Directory will be isolated to a VLAN that is separate from other space infrastructure.
# Tune access point distribution and radio configuration

Secondary Goals:

# Migrate from UXG-Pro to UDM-Pro/Max
## Goal is to save $360/y on cloud controller + enable SSO
## Unifi local hosted platform has significantly stabilized since leaving our last on-prem controller
# Expand networking capacity at central IDF location
# Install fiber-interconnects to all IDFs
# Add UPSes/surge protection to all IDFs

==== New VLANs ====

The VLANs are staying mostly the same. The major move is going to be re-IPing the subnets and changing which service has responsibility for network services on each VLAN.

https://docs.google.com/spreadsheets/d/1AdhdpAwvZrBFPJrThjYoDQ_1GbStVPAHvoCQb6sZzMA/edit?gid=0#gid=0
{| class="wikitable"
|+ Proposed VLANs
|-
! VLAN Name !! VLAN ID !! Gateway
!Subnet
!Usable IPs
!Full Subnet
!Status
!Temp VLAN ID
|-
| 0 - Untagged VLAN || 0 || 10.19.0.1
|30
|1
|10.19.0.1/30
|
|3
|-
| 15 - Dante VLAN || 15 || 10.19.15.1
|26
|61
|10.19.15.1/26
|
|N/A
|-
| 16 - AV Control VLAN || 16 || 10.19.16.1
|26
|61
|10.19.16.1/26
|
|N/A
|-
| 2 - Unifi Equipment || 2 || 10.19.2.1
|24
|253
|10.19.2.1/24
|
|4
|-
| 10 - PS1 Infrastructure || 10 || 10.19.10.1
|24
|253
|10.19.10.1/24
|
|110
|-
| 20 - PS1 AD Infra || 20 || 10.19.20.1
|24
|253
|10.19.20.1/24
|
|120
|-
| 50 - Member Wireless || 50 || 10.19.50.1
|24
|253
|10.19.50.1/24
|
|151
|-
| 60 - Guest Wireless || 60 || 10.19.60.1
|24
|253
|10.19.60.1/24
|
|161
|-
| 70 - IoT || 70 || 10.19.70.1
|24
|253
|10.19.70.1/24
|
|170
|-
| 150 - Member Rack || 150 || 10.19.150.1
|22
|1021
|10.19.150.1/22
|
|151
|-
| 160 - Passthrough VLAN || N/A ||
|
|
|
|
|162
|}

==== DNS Rework ====

Creating A Linux VM

2026-03-23T23:37:15Z

Muirrum:

{{mbox |type=warning |text=This page documents a draft procedure for [[Tech Team]], and is not currently normative}}
== tl;dr ==

Use Ansible to do most of the setup, in https://github.com/pumpingstationone/gitops. Ask [[User:Muirrum]] for assistance. The goal is for this process to be fully automated. The only part that should be manual at this point is domain-joining the box.

== Active Directory ==

Virtual machines should be joined to Active Directory. You will need

* Root access to the VM
* An AD account with permission to domain-join machines

Install these packages on the Debian VM:

<pre>
sudo apt install realmd packagekit sssd sssd-tools libnss-sss libpam-sss adcli
</pre>

Then, check for the PS:1 AD domain:

<pre>
sudo realm discover ad.pumpingstationone.org
</pre>

Join the realm:

<pre>
sudo realm join ad.pumpingstationone.org --user <your administrative AD account>
</pre>

Ensure that completed successfully. Then, restrict logins with by editing <code>/etc/sssd/sssd.conf</code>. Look for the line that says <code>access_provider=ad</code>, and change it to:

<pre>
access_provider=simple
simple_allow_groups=<your comma separated list of groups>
</pre>

Creating A Linux VM

2026-03-23T23:36:31Z

Muirrum: Created page with "== tl;dr == Use Ansible to do most of the setup, in https://github.com/pumpingstationone/gitops. Ask User:Muirrum for assistance. The goal is for this process to be fully automated. The only part that should be manual at this point is domain-joining the box. == Active Directory == Virtual machines should be joined to Active Directory. You will need * Root access to the VM * An AD account with permission to domain-join machines Install these packages on the Debia..."

== tl;dr ==

Use Ansible to do most of the setup, in https://github.com/pumpingstationone/gitops. Ask [[User:Muirrum]] for assistance. The goal is for this process to be fully automated. The only part that should be manual at this point is domain-joining the box.

== Active Directory ==

Virtual machines should be joined to Active Directory. You will need

* Root access to the VM
* An AD account with permission to domain-join machines

Install these packages on the Debian VM:

<pre>
sudo apt install realmd packagekit sssd sssd-tools libnss-sss libpam-sss adcli
</pre>

Then, check for the PS:1 AD domain:

<pre>
sudo realm discover ad.pumpingstationone.org
</pre>

Join the realm:

<pre>
sudo realm join ad.pumpingstationone.org --user <your administrative AD account>
</pre>

Ensure that completed successfully. Then, restrict logins with by editing <code>/etc/sssd/sssd.conf</code>. Look for the line that says <code>access_provider=ad</code>, and change it to:

<pre>
access_provider=simple
simple_allow_groups=<your comma separated list of groups>
</pre>

Get Help

2026-03-23T13:10:49Z

Muirrum: /* Member Assistance */

{{mbox |type=warning |text='''FOR LIFE-THREATENING EMERGENCIES DIAL [tel:911 911]'''.}}

This is a list of different ways you can contact PS1, get help from the organization, and get general help in an emergency.

=== New Members and Public Inquiries ===

* '''Tuesday Night Open House''' - Come join us at '''8 PM every Tuesday night''' for our open house and shop tour. Get answers to all of your questions and become a member! Find us at [https://duckduckgo.com/?t=ffab&q=pumping%20station%20one&iaxm=maps&bbox=-87.70836905218115%2C41.9462433639542%2C-87.7041106923302%2C41.94432245649106&strict_bbox=1 3519 N. Elston Ave, Chicago, IL 60618], parking on Elston is free.
* '''[mailto:info@pumpingstationone.org E-mail]''' - Someone will get back to you in a business day or two.

=== Member Assistance ===

* '''[[Discord]]''' - Key not working? Where is something? Tool broken? Someone bugging you? Discord is the fastest way to connect and get help.
* '''[mailto:info@pumpingstationone.org E-mail]''' - Can help with all and any matters related to membership and the space, it might take a day for someone to get back to you.
* [[:Category:Hosted Areas|'''Area Hosts''']] - Can answer questions about the space, equipment, area rules, and restocking supplies.
* [[Dispute Resolution Committee|'''Harassment and Disputes''']] - Want to report something weird or uncomfortable, or needing help to resolve a conflict? [mailto:drc@pumpingstationone.org Contact the DRC].
* [mailto:board@pumpingstationone.org '''Board of Directors'''] - Direct email to the board.

=== Injury and Life-threatening Emergencies ===

* '''Help Right Now!''' - Yelling for help is ok! Ask for help from other members, area hosts and volunteers in the space.
* '''Life-threatening Emergencies dial [tel:911 911]''' - Please report to Discord as soon as you're safe. We like knowing what has happened.
* [[:Category:Hosted_Areas|'''Area Host''']] - Always report injuries to the appropriate area host.
* '''[tel:+1-800-222-1222 Poison Control Center (800) 222-1222]''' - Free 24/7, for emergencies involving suspected poisoning, overdose, or exposure to toxic substances.
* '''[tel:988 Suicide & Crisis Lifeline 988]''' - Free 24/7 service for anyone experiencing a mental health crisis, suicidal thoughts, or emotional distress. You can call or text it.

=== Physical Issues, Building, Street, Utilities ===

* '''Tool Issues''' - Contact the appropriate [[:Category:Hosted Areas|'''Area Host''']] and post on Discord. Please let us know when a tool breaks so we can fix it.
* '''[tel:311 City Services Non‐emergency dial 311]''' - City services, non-urgent complaints, infrastructure requests, stuff involving the sidewalk or street.
* '''[tel:+1-312-742-4410 Police Non‐emergency (312) 742-4410]''' - Report recurring, non-emergency community concerns, neighborhood complaints, to our local police district.
* '''[tel:+1-866-556-6002 People's Gas (866) 556-6002]''' - Report gas leaks. Leave the building, don't operate any electrical switches. Report to Discord as soon as you're out.
* '''[tel:+1-800-334-7661 ComEd Electric (800) 334-7661]''' - Report downed power lines and outages.

=== Mental Health and Housing Support ===

* '''[tel:988 Suicide & Crisis Lifeline 988]''' - Free 24/7 service for anyone experiencing a mental health crisis, suicidal thoughts, or emotional distress. You can call or text it.
* '''[tel:+1-800-656-4673 National Sexual Assault Hotline (800) 656-4673]''' - Free, confidential 24/7 support for survivors of sexual assault and their loved ones, connecting callers to local resources. https://rainn.org/get-help
* '''[tel:+1-866-488-7386 LGBTQ+ Hotline (866) 488-7386]''' - The Trevor Project's 24/7 crisis intervention and suicide prevention line for LGBTQ+ youth.
* '''[tel:+1-877-565-8860 Trans Crisis Hotline (877) 565-8860]''' - Trans Lifeline, a peer support crisis line staffed by trans people, for trans and questioning individuals in distress.
* [http://mefiwiki.com/wiki/Homeless_Survival_Guide '''Homeless Survival Guide'''] - A directory of local food, housing, healthcare, and public benefits resources for people experiencing or at risk of homelessness.

=== Free Legal Advice ===
* '''[tel:855-805-9200 IL Pride Connect Legal Hotline (855-805-9200)]''' - a 9-4 PM, Monday through Friday free and confidential service offering legal information in Illinois. https://www.ilprideconnect.org/legal-hotline

=== Social Networks ===

* See [[Social Media]].

Member Storage Registry

2026-03-21T22:29:13Z

Muirrum: /* Catwalk Shelf Registry */

== Temporary Procedure as of January 2026 ==
'''New lockers were installed and are currently operating on a self serve basis. Make sure your stripe subscription is set to Member With Storage, and find a locker. If it is empty, and unlabeled, AND not claimed in the table below, then make sure the registry below reflects your new locker (do not remove old names without consulting MMT via info@pumpingstationone.org), and enjoy. Occasional audits take place so make sure your name is legible and matches your membership profile. If you prefer to remain anonymous, you can write your User ID instead. '''

'''Do not remove names from this list, or labels on shelves, or any items from shelves. If you believe a shelf should be open but ANY of those are present, contact info@pumpingstationone.org and ask for an audit.'''

== Catwalk Shelf Registry ==

''' -Alpha Alpha designations refer to mini shelves used for PS1 official projects '''

The catwalk is where some of our [[member leased server Systems]] infrastructure are located. Additionally, member shelves are on the catwalk.

'''Please do not store items on the catwalk, except on member shelves. Loose items will be ticketed'''

On the catwalk, numbering starts with the upper left shelf and goes down, then across.
{| class="wikitable"
| C A ||
|-
| C B ||
|-
| C C || Andrew Morris
|-
| C D ||
|-
| C E ||
|-
| C F ||
|-
| C G ||
|-
| C H ||
|-
| C I ||
|-
| C J ||
|-
| C K ||
|-
| C01 || Ron Olson
|-
| C02 || Jennie Plasterer
|-
| C03 || Andrew Locke
|-
| C04 || Josh Martin
|-
| C05 || Sam Paris
|-
| C06 || Books
|-
| C07 || Dave Ciepluch
|-
| C08 || Mike Bakula
|-
| C09 || Darlynn Cole
|-
| C10 || Mark Park
|-
| C11 || Riley Pierce
|-
| C12 || Babafemi Ekundayo
|-
| C13 || Sam Vuchetich
|-
| C14 ||Maïa Brunel
|-
| C15 || Karen Stevens
|-
| C16 || Bradley Hovanec
|-
| C17 || Diego begin
|-
| C18 || Andrew Jackson
|-
| C19 || Philip Nolan
|-
| C20 || Jordan Kessel
|-
| C21 || Patrick Stycos
|-
| C22 || Mark Ingraham
|-
| C23 || Earl Beaver
|-
| C24 || Nick Hawley/Woodshop Storage
|-
| C25 || Dan Wells
|-
| C26 || Sky Nova
|-
| C27 || Grant Spensley
|-
| C28 || Dan Locks
|-
| C29 || John Jegerski
|-
| C30 || Sean Blum
|-
| C31 || Jacob Dawson
|-
| C32 || David Fell
|-
| C33 || Elizabeth Koprucki
|-
| C34 || Mike Gucciard
|-
| C35 || Nick Griffith
|-
| C36 || Sam Abrahamson
|-
| C37 || Cameron Mastoran
|-
| C38 || Uwe grosse
|-
| C39 || Kobina Thatcher
|-
| C40 || Hef
|-
| C41 || Alice Ermentrout
|-
| C42 || WCARS / Garett Murphy
|-
| C43 ||
|-
| C44 || Sean Kivlehan
|-
| C45 || Carlos Aranibar
|-
| C46 || Lydia Miller
|-
| C47 || Adam Molski
|-
| C48 || Jamin Nollsch
|-
| C49 || Joe Mertz
|-
| C50 || Charles Barker
|-
| C51 || Ben Stagl
|-
| C52 || Brian Barnt
|-
| C53 || Davis Sayer Cox
|-
| C54 || Christian Rahl
|-
| C55 || Jacob Waller
|-
| C56 || Dave Solomon
|-
| C57 || Daniel Baltudis
|-
| C58 || Carl Karsten
|-
| C59 || Brian Chojnowski
|-
| C60 || Francesco Nardulli
|-
| C61 || [[User:Muirrum]]
|-
| C62 || Wren Parker
|-
| C63 || Zlatan Klebic
|-
| C64 || Shauen P. of Specialty3D
|-
| C65 || Nicholas Terrell
|-
| C66 || Eddie Muela
|}

== New Locker Registry ==

The drawers between the general work area and the [[:Category:Cold_Metals|Cold Metals area]]. Drawers beginning with GA face the general area, drawers beginning with CM face the Cold Metals area. Numbers begin on the bottom left, and go up to the right, then upwards.

GA - Top Left
{| class="wikitable"
|GA1: Hakem Olayyan
|GA2:
|GA3:
|GA4: Sasha Shavrnoch
|-
|GA5: Barron Smith
|GA6:
|GA7: Matthew Jacob
|GA8: Matt Miedlar
|-
|GA9: Bob Rz
|GA10: Miko
|GA11: Moller
|GA12: Dave D.
|}
GB - Bottom Left
{| class="wikitable"
|GB1: Bruno
|GB2: Andrew Masek
|GB3: Jungbae P
|GB4: Kevin Borgia
|-
|GB5: Maria Savrosova
|GB6: Ian Sampson
|GB7: Carter Robinson
|GB8: Nick Hawley
|-
|GB9: Unclaimable
|GB10: Unclaimable
|GB11: Unclaimable
|GB12: Unclaimable
|}

GC - Top Right
{| class="wikitable"
|GC1:
|GC2:
|GC3:
|GC4: Stephanie Thomas
|GC5:
|GC6:
|-
|GC7: Lilly Frazer
|GC8: Thomas Coor @ Bon Bon
|GC9: Sydney Miller
|GC10: Rohan Gupta
|GC11:
|GC12:
|-
|GC13: Gerald Corrigan
|GC14: Steve Zakharov
|GC15: Sara Kaiser
|GC16: Ben Kangas
|GC17: Leo Fulwider
|GC18: Angelo
|}

GD - Bottom Right
{| class="wikitable"
|GD1: Michael Sprinkler
|GD2: Avery
|GD3: MJ @thisjones
|GD4: Anthony Lighthall
|GD5: Nick Chiado
|GD6: Brian Desmond
|-
|GD7: Franklin Walton
|GD8: Mark Nielson
|GD9: Harry K
|GD10: Peggy
|GD11: Greg Ebos
|GD12: Andrew Locke
|-
|GD13: Unclaimable
|GD14: Unclaimable
|GD15: Unclaimable
|GD16: Unclaimable
|GD17: Unclaimable
|GD18: Unclaimable
|}
{| class="wikitable"
| CM 01 || Does Not Exist
|-
| CM 02 || Does Not Exist
|-
| CM 03 || Ben meisberger
|-
| CM 04 ||
|-
| CM 05 || Does Not Exist
|-
| CM 06 || Does Not Exist
|-
| CM 07 || genops vacuum
|-
| CM 08 || abe stroka
|-
| CM 09 ||
|-
| CM 10 ||
|-
| CM 11 || Does Not Exist
|-
| CM 12 || Does Not Exist
|-
| CM 13 || Shauen
|-
| CM 14 || becc
|-
| CM 15 || Does Not Exist
|-
| CM 16 || Does Not Exist
|-
| CM 17 || Yukon
|-
| CM 18 || Burton Kent
|-
| CM 19 || Emmett
|-
| CM 20 || Jeremiah Martin
|-
| CM 21 || Does Not Exist
|-
| CM 22 || Does Not Exist
|-
| CM 23 || Saad Khan
|-
| CM 24 || Ayla Hayes
|-
| CM 25 || Does Not Exist
|-
| CM 26 || Does Not Exist
|-
| CM 27 || bram Abraham
|-
| CM 28 || George Hoffman
|-
| CM 29 || Michael Cody
|-
| CM 30 || Timothy @shloppo
|-
| CM 31 ||
|-
| CM 32 ||
|-
| CM 33 ||
|-
| CM 34 ||
|-
| CM 35 ||
|-
| CM 36 ||
|-
| CM 37 ||
|-
| CM 38 ||
|-
| CM 39 ||
|-
| CM 40 ||
|-
| CM 41 ||
|-
| CM 42 ||
|-
| CM 43 ||
|-
| CM 44 ||
|-
| CM 45 ||
|-
| CM 46 ||
|-
| CM 47 ||
|-
| CM 48 ||
|-
| CM 49 ||
|-
| CM 50 ||
|-
| CM 51 ||
|-
| CM 52 ||
|-
| CM 53 ||
|-
| CM 54 ||
|-
| CM 55 ||
|-
| CM 56 ||
|-
| CM 57 ||
|-
| CM 58 ||
|-
| CM 59 ||
|-
| CM 60 ||
|-
|}

[[Category:Registry]]

Member Proxmox Cluster

2026-03-18T13:02:42Z

Muirrum:

{{mbox |type=warning |text=This page documents an ongoing physical project. Information may not be entirely accurate and may change frequently. Contact [[User:Muirrum]] or [[Tech Team]] with any questions. }}

=== Hardware ===
The member Proxmox cluster consists of qty 3 Supermicro servers located in RU ??-?? of member rack 1. Each server is labelled with its hostname. Each physical host has approx. 128GB RAM and 4TB of logical storage (zRAID1). The CPU is an Intel Xeon E5-2620 @ 2.6GHz, with 24 cores.

=== Tasks ===
See below for more details on tasks.

{| class="wikitable"
|+ Task List
|-
! Task !! Status !! Completed By
|-
| Install PVE9 on all machines || In Progress (2/3) ||
|-
| Install supporting infrastructure || To-Do ||
|-
| Identify future tasks || To-Do ||
|}

==== Install PVE9 ====
A quirk of these hosts is that they need <code>nomodeset</code> applied to their kernel command line. This is most easily done in the installer's GRUB menu. When installing with Ventoy, an additional edit must be made to the first-boot kernel command line to remove <code>rdinit=/vtoy/vtoy</code>, otherwise the initramfs will kernel panic.

==== Supporting Infrastructure ====
What supporting infrastructure is needed for this cluster? A separate L2 network? Separate L2 for the PVE management interface? DHCP/DNS?

Member Proxmox Cluster

2026-03-18T12:58:04Z

Muirrum:

{{mbox |type=warning |text=This page documents an ongoing physical project. Information may not be entirely accurate. Contact [[User:Muirrum]] or [[Tech Team]] with any questions. }}

=== Hardware ===
The member Proxmox cluster consists of qty 3 Supermicro servers located in RU ??-?? of member rack 1. Each server is labelled with its hostname. Each physical host has approx. 128GB RAM and 4TB of logical storage (zRAID1). The CPU is an Intel Xeon E5-2620 @ 2.6GHz, with 24 cores.

=== Tasks ===
See below for more details on tasks.

{| class="wikitable"
|+ Task List
|-
! Task !! Status !! Completed By
|-
| Install PVE9 on all machines || In Progress (2/3) ||
|-
| Install supporting infrastructure || To-Do ||
|-
| Identify future tasks || To-Do ||
|}

==== Install PVE9 ====
A quirk of these hosts is that they need <code>nomodeset</code> applied to their kernel command line. This is most easily done in the installer's GRUB menu. When installing with Ventoy, an additional edit must be made to the first-boot kernel command line to remove <code>rdinit=/vtoy/vtoy</code>, otherwise the initramfs will kernel panic.

==== Supporting Infrastructure ====
What supporting infrastructure is needed for this cluster? A separate L2 network? Separate L2 for the PVE management interface? DHCP/DNS?

User:Muirrum

2026-03-18T12:55:58Z

Muirrum:

Systems administrator and electronics enthusiast. Ask me about my Gentoo Linux setup!

I like to fix things on the wiki when I find them. If I've made a mistake, poke me on Discord (same username).

=== Things I'd like to work on ===

* Documenting the [[User:Muirrum/Network|network infrastructure & architecture]]
* [[Member Proxmox Cluster|Member PXMX cluster]]

[[2026 IT Infra Projects]]

Member Proxmox Cluster

2026-03-18T12:55:39Z

Muirrum:

{{mbox |type=warning |text=This page documents an ongoing physical project. Information may not be entirely accurate. Contact [[User:Muirrum]] or [[Tech Team]] with any questions. }}

=== Hardware ===
The member Proxmox cluster consists of qty 3 Supermicro servers located in RU ??-?? of member rack 1. Each server is labelled with its hostname. Each physical host has approx. 128GB RAM and 4TB of logical storage (zRAID1). The CPU is an Intel Xeon E5-2620 @ 2.6GHz, with 24 cores.

=== Tasks ===
See below for more details on tasks.

{| class="wikitable"
|+ Task List
|-
! Task !! Status !! Completed By
|-
| Install PVE9 on all machines || In Progress ||
|-
| Install supporting infrastructure || To-Do ||
|-
| Identify future tasks || To-Do ||
|}

==== Install PVE9 ====
A quirk of these hosts is that they need <code>nomodeset</code> applied to their kernel command line. This is most easily done in the installer's GRUB menu. When installing with Ventoy, an additional edit must be made to the first-boot kernel command line to remove <code>rdinit=/vtoy/vtoy</code>, otherwise the initramfs will kernel panic.

==== Supporting Infrastructure ====
What supporting infrastructure is needed for this cluster? A separate L2 network? Separate L2 for the PVE management interface? DHCP/DNS?

Member Proxmox Cluster

2026-03-18T12:48:43Z

Muirrum:

{{mbox |type=warning |text=This page documents an ongoing physical project. Information may not be entirely accurate. Contact [[User:Muirrum]] with any questions. }}

=== Hardware ===
The member Proxmox cluster consists of qty 3 Supermicro servers located in RU ??-?? of member rack 1. Each server is labelled with its hostname. Each physical host has approx. 128GB RAM and 4TB of logical storage (zRAID1). The CPU is an Intel Xeon E5-2620 @ 2.6GHz, with 24 cores.

Member Rack

2026-03-18T12:44:37Z

Muirrum:

{{mbox |type=warning |text=This information may be out of date. [[IT Infrastructure|Up-to-date IT information can be found here]] }}
This page will document the member rack.

=== Rack Assignment / Usage ===
{| class="wikitable"
|+
!U
!Rack 1 Front
!Rack 1 Back
!U
!Rack 2 Front
!Rack 2 Back
|-
|01
|Unknown
|Unknown
|01
|KVM - Space Owned
|Ron - Networking
|-
|02
|Unknown
|Unknown
|02
|PS1-SW-MEMBER
|Ron - Networking
|-
|03
|Ron
|
|03
|Empty
|Ron - Networking
|-
|04
|Ron
|
|04
|Empty
|
|-
|05
|Ron
|
|05
|Empty
|
|-
|06
|[[Member Proxmox Cluster]] 1
|
|06
|Unknown
|
|-
|07
|[[Member Proxmox Cluster]] 2
|
|07
|Unknown
|
|-
|08
|[[Member Proxmox Cluster]] 3
|
|08
|Unknown
|
|-
|09
|Unknown
|
|09
|
|
|-
|10
|Unknown
|
|10
|
|
|-
|11
|James
|
|11
|
|
|-
|12
|James
|
|12
|
|
|-
|13
|Unknown
|
|13
|
|
|-
|14
|Empty
|
|14
|
|
|-
|15
|James
|
|15
|
|
|-
|16
|James
|
|16
|Carl
|
|-
|17
|Empty
|
|17
|Carl
|
|-
|18
|Empty
|
|18
|Carl
|
|-
|19
|James
|
|19
|Unknown
|
|-
|20
|James
|
|20
|Unknown
|
|-
|21
|James
|
|21
|Unknown
|
|-
|22
|James
|
|22
|Unknown
|
|-
|23
|James
|
|23
|Unknown
|
|-
|24
|James
|
|24
|Unknown
|
|-
|25
|James
|
|25
|Unknown
|
|-
|26
|James
|
|26
|Unknown
|
|-
|27
|James
|
|27
|Unknown
|
|-
|28
|James
|
|28
|Unknown
|
|-
|29
|James
|
|29
|Unknown
|
|-
|30
|James
|
|30
|Unknown
|
|-
|31
|James
|
|31
|Unknown
|
|-
|32
|James
|
|32
|Unknown
|
|-
|33
|James
|
|33
|Unknown
|
|-
|34
|UPS - Space Owned
|X
|34
|Unknown
|
|-
|35
|UPS - Space Owned
|X
|35
|Unknown
|
|-
|36
|UPS - Space Owned
|X
|36
|Unknown
|
|-
|37
|UPS - Space Owned
|X
|37
|Unknown
|
|-
|38
|UPS - Space Owned
|X
|38
|Unknown
|
|-
|39
|UPS - Space Owned
|X
|39
|Unknown
|
|-
|40
|UPS - Space Owned
|X
|40
|Unknown
|
|-
|41
|UPS - Space Owned
|X
|41
|Unknown
|
|-
|42
|UPS - Space Owned
|X
|42
|Unknown
|
|}

Internal Static IPs

2026-03-18T00:08:50Z

Muirrum:

{{mbox |type=warning |text=This information may be out of date. [[IT Infrastructure|Up-to-date IT information can be found here]] }}
== Static IP Assignments ==

=== Networking (10.2.X.X) ===
{| class="wikitable"
|- style="font-weight:bold;"
!Subnet
!Type
!IP
!Status
!Name
!Domain
!Notes
|-
|10.2.x.x
|AP
|DHCP
|Active
|PS1-AP-GENERAL
|
|General Area AP
|-
|10.2.x.x
|AP
|DHCP
|Active
|PS1-AP-CNC
|
|CNC AP
|-
|10.2.x.x
|AP
|DHCP
|Active
|PS1-AP-UPSTAIRS
|
|Upstairs AP
|-
|10.2.x.x
|AP
|DHCP
|Active
|PS1-AP-WOODSHOP
|
|Woodshop AP
|}

=== Core Physical Infrastructure ===
[TBD]

=== Core Virtual Infrastructure ===
[TBD]

=== Other Infrastructure ===
[TBD]
{| class="wikitable"
|- style="font-weight:bold;"
!Subnet
!Type
!IP
!Status
!Name
!Domain
!Notes
|-
|10.2.x.x
|AP
|DHCP
|Active
|PS1-AP-GENERAL
|
|General Area AP
|-
|10.2.x.x
|AP
|DHCP
|Active
|PS1-AP-CNC
|
|CNC AP
|-
|10.2.x.x
|AP
|DHCP
|Active
|PS1-AP-UPSTAIRS
|
|Upstairs AP
|-
|10.2.x.x
|AP
|DHCP
|Active
|PS1-AP-WOODSHOP
|
|Woodshop AP
|-
|10.10.x.x
|Hypervisor
|10.10.1.1
|Maintenance
|HV1
| style="text-decoration:underline; color:#00E;" |hv1.ad.pumpingstationone.org
|R720xd ESXi Host
|-
|10.10.x.x
|Hypervisor
|10.10.1.2
|Active
|HV2
| style="text-decoration:underline; color:#00E;" |hv2.ad.pumpingstationone.org
|SuperMicro ESXi Host
|-
|10.10.x.x
|Hypervisor
|10.10.1.3
|Active
|HV3
| style="text-decoration:underline; color:#00E;" |hv3.ad.pumpingstationone.org
|SuperMicro ESXi Host
|-
|10.2.x.x
|Networking
|10.1.0.1
|Active
|PS1-UDMPro
|
|Unifi UDM Pro
|-
|10.2.x.x
|Networking
|DHCP
|Active
|PS1-SW-CENTRAL
|
|Unifi 48 port POE Switch
|-
|10.2.x.x
|Networking
|DHCP
|Active
|PS1-SW-CORE
|
|Unifi 24 port Switch
|-
|10.2.x.x
|Networking
|DHCP
|Active
|PS1-SW-POE4
|
|Unifi 4+8 port PoE Switch
|-
|10.2.x.x
|Networking
|DHCP
|Active
|PS1-SW-TBD
|
|Unifi 48 port PoE
|-
|10.2.x.x
|Networking
|DHCP
|Active
|PS1-XG
|
|Unifi 16 Port 10G Switch
|-
|10.2.x.x
|Networking
|DHCP
|Active
|PS1-SW-MEMBER
|
|Unifi 48 port Switch
|-
|10.10.x.x
|VM
|10.10.0.121
|Active
|PS1-WIKI
| style="text-decoration:underline; color:#00E;" |wiki.pumpingstationone.org
|Wiki VM (MediaWiki)
|-
|10.10.x.x
|VM
|10.10.0.150
|Active
|PS1-DEV-DC1
|
|Development domain
|-
|10.10.x.x
|VM
|10.10.0.31
|Active
|PS1-DC01
| style="text-decoration:underline; color:#00E;" |DC01.pumpingstationone.org
|ad.pumpingstationone.org Active Directory
|-
|10.10.x.x
|VM
|10.10.0.32
|Active
|PS1-DC02
| style="text-decoration:underline; color:#00E;" |DC02.pumpingstationone.org
|ad.pumpingstationone.org Active Directory
|-
|10.10.x.x
|VM
|10.10.0.34
|Active
|PS1-VCAS
| style="text-decoration:underline; color:#00E;" |vcsa.ad.pumpingstationone.org
|ESXi/vSphere 7 Platform Services Controller
|-
|10.10.x.x
|VM
|10.10.0.60
|Active
|PS1-(SELFSERVICE)
| style="text-decoration:underline; color:#00E;" |selfservice.pumpingstationone.org
|PW Self Service VM
|-
|10.10.x.x
|VM
|10.10.1.224
|Active
|PS1-GLUE
| style="text-decoration:underline; color:#00E;" |glue.ad.pumpingstationone.org
|
|-
|10.10.x.x
|VM
|10.10.2.1
|Active
|PS1-CONCERTO
|
|
|-
|10.10.x.x
|VM
|10.10.2.12
|Active
|PS1-NGINX-02
| style="text-decoration:underline; color:#00E;" |nginx.ad.pumpingstationone.org
|
|-
|10.10.x.x
|VM
|10.10.2.13
|Active
|PS1-LINK
|psone.link
|
|-
|10.10.x.x
|VM
|10.10.2.15
|Active
|PS1-VEEAM
| style="text-decoration:underline; color:#00E;" |veeam.ad.pumpingstationone.org
|
|-
|10.10.x.x
|VM
|10.10.3.11
|Maintenance
|PS1-CANVAS
| style="text-decoration:underline; color:#00E;" |test.canvas.pumpingstationone.org
|
|-
|10.10.x.x
|VM
|DHCP
|Active
|PS1-ADMIN
|
|Windows jumpbox
|-
|10.10.x.x
|VM
|DHCP
|Active
|PS1-DEV-TEST
|
|Build VM for VS - test domain
|-
|10.10.x.x
|VM
|DHCP
|Active
|PS1-DOORACCESS
|
|
|}

2026 Network Re-architecture

2026-03-18T00:06:14Z

Muirrum: VLAN table

== Foreword ==
Our current network topology is the legacy of my early days of learning networking and best practices. In the 8 years since I've become CTO, I've learned many things. While our networking config has worked up until now, it leaves a lot to be desired. - Sky, CTO in 2026.

== Summary ==

=== Where We Are ===
The PS:One network is kinda wonky. We have a bunch of subnets that were setup with the naming convention 10.[VLAN-ID].X.X. While this works, it is not best practice and a bit silly looking. We're relying on Active Directory for DNS and DHCP on a lot of critical networks. This creates a bootstrap issue with the network where things don't work until AD has booted. Having AD play such a critical role in our network when most of our members are familiar with Linux does not make sense and creates a poor experience.

=== Where We're Going ===
Our 2026 network re-architecture project has three major goals and a few secondary goals:

Major Goals:

# VLAN / DHCP Rework
## VLANs will be formatted with the naming convention '''10.19.[VLAN-ID].X''' with 19 being PS:One's site ID (35'''19''')
## DHCP will be fully taken away from Active Directory and migrated to the Unifi equipment.
## Stretch goal: DHCP managed by IaC (infrastructure-as-code) solution.
# DNS Rework
## DNS will be taken away from Active Directory on most VLANs.
## Active Directory will continue manage DNS on the VLAN where space computers reside since that's what AD likes.
## AD DNS will be replaced with another solution. Ideally an IaC (infrastructure-as-code) managed solution that is easier for the membership to access and understand.
# AD Isolation
## Active Directory will be isolated to a VLAN that is separate from other space infrastructure.

Secondary Goals:

# Migrate from UXG-Pro to UDM-Pro/Max
## Goal is to save $360/y on cloud controller + enable SSO
## Unifi local hosted platform has significantly stabilized since leaving our last on-prem controller
# Expand networking capacity at central IDF location
# Install fiber-interconnects to all IDFs
# Add UPSes/surge protection to all IDFs

==== New VLANs ====

The VLANs are staying mostly the same. The major move is going to be re-IPing the subnets and changing which service has responsibility for network services on each VLAN.
{| class="wikitable"
|+ Proposed VLANs
|-
! Description !! VLAN ID !! Subnet Size
|-
| 0 - Untagged || 0 || /30
|-
| 15 - Dante || 15 || /26
|-
| 16 - AV Control || 16 || /26
|-
| 2 - Unifi || 2 || /24
|-
| 10 - PS1 Infrastructure || 10 || /24
|-
| 20 - PS1 Wired Network || 20 || /24
|-
| 50 - Member Wireless || 50 || /24
|-
| 60 - Guest Wireless || 60 || /24
|-
| 70 - IoT || 70 || /24
|-
| 150 - Member Rack || 150 || /22
|-
| 160 - Passthrough VLAN || 160 || N/A
|}

Darkroom

2026-03-15T16:06:16Z

Muirrum: /* To-Do */please make the room not smell like that :(

== To-Do ==
* Can room be converted to darkroom (i.e any objections to the conversion)
* Verify room ventilation, power, plumbing
** Room has power and plumbing which should be adequate.
** Ventilation is unclear. There is an hvac register in the ceiling but no switch for a fan. Appears to be similar ventilation scheme as the bathroom sharing the wall. Depending on flow path, we can put a fan on the darkroom register which should provide enough ventilation.
*** I tried taking the register off to see where the duct leads, but it would not budge even after taking the screws out.
* Inspect existing enlarger, identify repairs + addtl equipment needed (Omega D3 model I think)
** Existing enlarger is in pretty good shape. Missing a few parts necessary for operations.
*** The enlarger is missing the mount for the return spring at the top of the chassis and the lifting crank which would be on the right hand side.
*** The bellows, condenser lens, and enlarger lens all look to be in good shape. I didn't see any light leaks from the bellows when I was testing everything.
* The enlarger came with two sets of negative holders (4x5 (this bad boy can do large format!!!) and 6x6 (medium format). There was also one side of a holder for 6x4.5 (medium format) which was made of cardboard. Other holders can be bought or made very easily.
* Check for and patch light leaks
** The door obviously needs some work. The easiest solution I can think of is blackout curtains on the outside of the door and making sure the fluorescent fixture right in front of the door stays off.
* Storage plan (Chemistry, paper safe, tools)
** Disposal plan for chemistry
*
*
* Design for space
** See screenshots below
* Fix whatever is causing the nasty smell

== Current Plan ==

Use the "Cat bathroom" off of the CNC room as a darkroom.

Current Layout: (shown)
[[File:Current "Cat" Bathroom Layout.png|thumb]]
Realistic Layout: (Coming soon to a Wiki near you)

Ideal Layout:(Coming soon to a Wiki near you)

Darkroom

2026-03-11T03:28:50Z

Muirrum: Created page with "== To-Do == * Can room be converted to darkroom (i.e any objections to the conversion) * Verify room ventilation, power, plumbing * Inspect existing enlarger, identify repairs + addtl equipment needed * Check for and patch light leaks * Design for space * Storage plan (Chemistry, paper safe, tools) ** Disposal plan for chemistry == Current Plan == Use the "Cat bathroom" off of the CNC room as a darkroom."

== To-Do ==
* Can room be converted to darkroom (i.e any objections to the conversion)
* Verify room ventilation, power, plumbing
* Inspect existing enlarger, identify repairs + addtl equipment needed
* Check for and patch light leaks
* Design for space
* Storage plan (Chemistry, paper safe, tools)
** Disposal plan for chemistry

== Current Plan ==

Use the "Cat bathroom" off of the CNC room as a darkroom.

2026 IT Infra Projects

2026-03-08T19:43:28Z

Muirrum:

= Projects =
In order of priority...
# [[Deep Harbor]]
## Deep Harbor Go-Live
## Post-launch critical items
## Triage to-do items
# [[2026 Wiki Migration]]
# [[Automatic Profile Deletion]]
# [[2026 Network Re-architecture]]
## VLAN Rework
## DNS Rework
## AD Isolation
# <del>[[Migrate from VMWare to Proxmox|ESXi > Proxmox Migration]]</del>
# [[2026 Infrastructure Consolidation]]
## Debian standardization
## Configuration management
## Docker Re-architecture (k8s ??)
# [[2026 Identity Management|Identity Management]]
## Volunteer Identity > Okta
## Member identity - B2C > ??? (Entra External ID / Auth0 / Alternatives)
# [[Shared Drive]]

Migrate from VMWare to Proxmox

2026-03-08T17:23:07Z

Muirrum: Formatting

= Relevant Infrastructure =

* ESXi:
** https://10.10.2.61/ui/#/host/vms
** https://10.10.2.62/ui/#/host
* Proxmox
** https://10.10.2.63:8006/
** https://10.10.2.40:8006/

= VM Pre-Stage =

# Validate you can login to VM
# Note down VM IP address
# Install QEMU guest agent
## Linux: `qemu-guest-agent`
## Windows: https://pve.proxmox.com/wiki/Windows_VirtIO_Drivers

= Migration Steps =

# Power down VM
## Verify VM is off in ESXi
# Run Veeam backup job `Backup Job 5`
# Navigate to `Backups > Disk`
# Right click the VM you would like to restore
# Select `Restore Entire VM to Proxmox VE`
## Virtual Machine - nothing to change
## Restore Mode - `Restore to New Location with Different Settings`
## Host
### Click `Host...` in the bottom right
### Select a specific host in the cluster
## Storage
### Click the VM name
#### Click `Storage...`
#### Select `vrtx-perc8`
#### Click `Disk Type`
#### `RAW`
## Name - No need to change name
## Network
### Select the network
### Click `Network...`
### Select `vmbr0`
### Reason - whatever you want
### Check `Power on target VM after restoring`
# Click FINISH

= Post Migration Steps =

# Boot the VM
# Login via the console
# Fix networking so that the VM utilizes the new NIC
## Ubuntu:
### ip addr to identify new NIC
### `sudo nano /etc/netplan/XX-netplan.cfg`
### Change the interface to match the new interface
## Other Linux: ???
### Bring ensXX up
### ip link set ensXX up
### dhclient ensXX
# Uninstall VMWare tools
## run as root: `/usr/bin/vmware-uninstall-tools.pl`
## OR
## `sudo apt remove open-vm-tools`
# Validate everything is working
# Login to ESXi
## Rename old VM to `MIGRATED-VM-NAME`
## Disconnect the NIC in case the server reboots

2026 IT Infra Projects

2026-03-06T01:17:47Z

Muirrum:

= Projects =
In order of priority...
# [[Deep Harbor]]
## Deep Harbor Go-Live
## Post-launch critical items
## Triage to-do items
# [[2026 Wiki Migration]]
# [[Automatic Profile Deletion]]
# [[2026 Network Re-architecture]]
## VLAN Rework
## DNS Rework
## AD Isolation
# [[Migrate from VMWare to Proxmox|ESXi > Proxmox Migration]]
# [[2026 Infrastructure Consolidation]]
## Debian standardization
## Configuration management
## Docker Re-architecture (k8s ??)
# [[2026 Identity Management|Identity Management]]
## Volunteer Identity > Okta
## Member identity - B2C > ??? (Entra External ID / Auth0 / Alternatives)
# [[Shared Drive]]

2026 Wiki Migration

2026-03-04T01:14:24Z

Muirrum: Final timeline from Discord

{| class="wikitable"
|+ Dates of Interest
|-
| 2026-04-08 || MyWikis Lock editing access on our wiki site-wide.
|-
| 2026-04-09 || Complete XML and media dump of the wiki with all history.
|-
| || Complete database dump of the wiki.
|-
| || Copy of the site configuration data minus any proprietary code being retained by MyWikis, where possible.
|-
| 05/07/2026 || PS:1 Account termination date
|}

2026 Infrastructure Consolidation

2026-03-01T18:21:54Z

Muirrum: /* Netboot */

The goal of this project is to standardize practices and standards. Currently, the infrastructure is a mixture of Linux distributions, configuration management methods, and unclear ability to centrally manage and track systems beyond the Proxmox tools.

{| class="wikitable"
|+ Service Decisions
|-
! Role !! Service Chosen / Choices
|-
| Distribution || Debian
|-
| DNS || PowerDNS/???
|-
| IPAM || Nautobot/???
|}

== Debian ==

PS:1's Linux distribution of choice is Debian. Eventually, all PS:1 Linux infrastructure components should be converted to Debian Trixie. Currently, a mix of CentOS 6, CentOS 7, Rocky 9, and Debian is used. End-of-life systems should be prioritized higher than currently in support systems.

=== Netboot ===

One of the things that I (Cara) would like a lot is a PXE netboot image to use to quickly stand up new VMs, and reimage old ones as needed. The requirements for a Debian netboot image are:

# Extracted [https://deb.debian.org/debian/dists/trixie/main/installer-amd64/current/images/netboot/netboot.tar.gz netboot.tar.gz] in a TFTP server
# Complete [https://ipxe.org iPXE] script, maybe allowing for selecting different tools like a live debugging OS for physical machines?
# Configuration on the DHCP server to serve a chainload payload to legacy PXE clients, and the real iPXE script for iPXE clients
# Ideally, a Debian preseed file to completely automate the installation of Debian once selected

In theory it's possible to PXE boot a Windows installtion with SCCM and iPXE, but I (Cara) have no experience with SCCM so I'm not focusing on it for now.

== IPAM/Infrastructure Management ==

This project should investigate tools like Nautobot to define and manage IT infrastructure.

2026 Infrastructure Consolidation

2026-02-28T22:46:12Z

Muirrum: /* Debian */

2026 Infrastructure Consolidation

2026-02-21T19:36:07Z

Muirrum:

User:Muirrum

2026-02-21T19:30:39Z

Muirrum:

2026 IT Infra Projects

2026-02-21T19:15:35Z

Muirrum:

= Projects =
In order of priority...
# [[Deep Harbor]]
## Deep Harbor Go-Live
## Post-launch critical items
## Triage to-do items
# [[2026 Wiki Migration]]
# [[2026 Network Re-architecture]]
## VLAN Rework
## DNS Rework
## AD Isolation
# [[Migrate from VMWare to Proxmox|ESXi > Proxmox Migration]]
# [[2026 Infrastructure Consolidation]]
## Debian standardization
## Configuration management
## Docker Re-architecture
# [[2026 Identity Management|Identity Management]]
## Volunteer Identity > Okta
## Member identity - B2C > ??? (Entra External ID / Auth0 / Alternatives)

2026 Infrastructure Consolidation

2026-02-21T19:14:47Z

Muirrum: initial creation

The goal of this project is to standardize practices and standards. Currently, the infrastructure is a mixture of Linux distributions, configuration management methods, and unclear ability to centrally manage and track systems beyond the Proxmox tools.

== Debian ==

PS:1's Linux distribution of choice is Debian. Eventually, all PS:1 Linux infrastructure components should be converted to Debian Trixie. Currently, a mix of CentOS 6, CentOS 7, Rocky 9, and Debian is used. End-of-life systems should be prioritized higher than currently in support systems.

== IPAM/Infrastructure Management ==

This project should investigate tools like Nautobot to define and manage IT infrastructure.

User:Muirrum/Network

2026-02-20T19:14:50Z

Muirrum: /* Equipment */updated ap locations and router model

The following is my understanding of the current architecture of PS:1's network. It is not normative in any way. Do not reference it. ''Hic Sunt Dracones''!

=== Equipment ===

PS:1 uses mostly Unifi equipment. There are Unifi access points in Art/Electronics, CNC, General, and the Woodshop. The core router is a Unifi UXG. Most interlinks between access switches and the core switch are Cat5, but some switches have the capability to do a 10Gb SFP+ connection, including the core switch.

=== Member Rack ===

The [[Member Rack]], located on the Catwalk to the left of the access door, is really two 42U racks. Each rack has two ToR Unifi switches, which are owned/managed by PS:1. The information on the Member Rack's wiki page is out of date and needs to be updated. I plan to do this SoonTM.

2026 IT Infra Projects

2026-02-20T02:12:37Z

Muirrum:

= Projects =
In order of priority...
# Deep Harbor
## Deep Harbor Go-Live
## Post-launch critical items
## Triage to-do items
# Wiki Migration
# Network Re-architecture
## VLAN Rework
## DNS Rework
## AD Isolation
# ESXi > Proxmox Migration
# Infrastructure Consolidation
## Debian standardization
## Configuration management
## Docker Re-architecture

2026 IT Infra Projects

2026-02-20T02:11:57Z

Muirrum:

= Projects =
In order of priority...
# Deep Harbor
- Deep Harbor Go-Live
- Post-launch critical items
- Triage to-do items
# Wiki Migration
# Network Re-architecture
- VLAN Rework
- DNS Rework
- AD Isolation
# ESXi > Proxmox Migration
# Infrastructure Consolidation
- Debian standardization
- Configuration management
- Docker Re-architecture

2026 IT Infra Projects

2026-02-20T02:04:49Z

Muirrum: Created page with "projects 123"

projects 123

User:Muirrum

2026-02-19T03:42:19Z

Muirrum:

User:Muirrum/Network

2026-02-19T03:41:46Z

Muirrum: Created page with "The following is my understanding of the current architecture of PS:1's network. It is not normative in any way. Do not reference it. ''Hic Sunt Dracones''! === Equipment === PS:1 uses mostly Unifi equipment. There are Unifi access points in Electronics, the Lounge, General, and Metals[citation needed]. The core router is a Unifi gateway of unknown (to me) model. Most interlinks between access switches and the core switch are Cat5, but some switches have the..."

The following is my understanding of the current architecture of PS:1's network. It is not normative in any way. Do not reference it. ''Hic Sunt Dracones''!

=== Equipment ===

PS:1 uses mostly Unifi equipment. There are Unifi access points in Electronics, the Lounge, General, and Metals[citation needed]. The core router is a Unifi gateway of unknown (to me) model. Most interlinks between access switches and the core switch are Cat5, but some switches have the capability to do a 10Gb SFP+ connection, including the core switch.

=== Member Rack ===

The [[Member Rack]], located on the Catwalk to the left of the access door, is really two 42U racks. Each rack has two ToR Unifi switches, which are owned/managed by PS:1. The information on the Member Rack's wiki page is out of date and needs to be updated. I plan to do this SoonTM.

User:Muirrum

2026-02-19T02:50:05Z

Muirrum:

Systems administrator and electronics enthusiast. Ask me about my Gentoo Linux setup!

I like to fix things on the wiki when I find them. If I've made a mistake, poke me on Discord (same username).

=== Things I'd like to work on ===

- Documenting the network infrastructure & architecture
- Member PXMX cluster

User:Muirrum

2026-02-19T02:29:19Z

Muirrum:

Systems administrator and electronics enthusiast. Ask me about my Gentoo Linux setup!

I like to fix things on the wiki when I find them. If I've made a mistake, poke me on Discord (same username).

### Things I'd like to work on

- Documenting the network infrastructure & architecture
- Member PXMX cluster

Get Help

2026-02-18T00:49:13Z

Muirrum: /* Email Lists */

== Email Lists ==

* Public E-mail: info@pumpingstationone.org:
** This sends an email to Freshdesk, the ticketing system we use, which is supported by several different people.

* Discord: Check [[Discord]].

* The old Google groups and Discourse have been retired. Join the conversation on Discord.
* If you need to contact the board of directors privately you should email directors-only@pumpingstationone.org

== Social Networks ==
See [[Social Media]].

== Links ==
* Website: [http://pumpingstationone.org/ http://pumpingstationone.org/]
* Blog: [http://pumpingstationone.org/ http://pumpingstationone.org/] Members are encouraged to post to our blog.
* [[Wiki]]: [http://wiki.pumpingstationone.org http://wiki.pumpingstationone.org/]
* GitHub: [https://github.com/pumpingstation1 https://github.com/pumpingstation1]
* Thingiverse: [https://www.thingiverse.com/groups/pumping-station-one https://www.thingiverse.com/groups/pumping-station-one]
* [[IRC]]: #pumpingstationone on irc.libera.chat
* Trello: https://trello.com/pumpingstationone
* Other Hackerspaces: http://hackerspaces.org/wiki/Hackerspaces
* Spaces We've Worked With:
** [http://www.tvbgone.com/cfe_tvbg_main.php Mitch Altman] of [https://www.noisebridge.net/wiki/Noisebridge Noisebridge ''San Francisco'']
** [http://www.i3detroit.com/ i3 Detroit]
** [http://www.c3kc.org/ CCCKC ''Kansas City'']

== Phone Numbers ==
[[Who To Call]]

In case of emergency, you should probably call 911 or 311, depending on the severity.

If you call 911 or 311, please write into board@ or info@pumpingstationone.org to let us know what has happened. We like knowing what has happened.

In case of emergency that is confusing and non-fatal such that you are uncomfortable calling emergency lines, you may call or text The Vulture. Possibly call and text The Vulture. (260) 358 - 7321

Get Help

2026-02-18T00:46:58Z

Muirrum: /* Email Lists */ Discourse is dead RIP discourse

== Email Lists ==

* Public E-mail: info@pumpingstationone.org:
** This sends an email to Freshdesk, the ticketing system we use, which is supported by several different people.

* Discord: https://psone.link/discord

* The old Google groups and Discourse have been retired. Join the conversation on Discord.
* If you need to contact the board of directors privately you should email directors-only@pumpingstationone.org

== Social Networks ==
See [[Social Media]].

== Links ==
* Website: [http://pumpingstationone.org/ http://pumpingstationone.org/]
* Blog: [http://pumpingstationone.org/ http://pumpingstationone.org/] Members are encouraged to post to our blog.
* [[Wiki]]: [http://wiki.pumpingstationone.org http://wiki.pumpingstationone.org/]
* GitHub: [https://github.com/pumpingstation1 https://github.com/pumpingstation1]
* Thingiverse: [https://www.thingiverse.com/groups/pumping-station-one https://www.thingiverse.com/groups/pumping-station-one]
* [[IRC]]: #pumpingstationone on irc.libera.chat
* Trello: https://trello.com/pumpingstationone
* Other Hackerspaces: http://hackerspaces.org/wiki/Hackerspaces
* Spaces We've Worked With:
** [http://www.tvbgone.com/cfe_tvbg_main.php Mitch Altman] of [https://www.noisebridge.net/wiki/Noisebridge Noisebridge ''San Francisco'']
** [http://www.i3detroit.com/ i3 Detroit]
** [http://www.c3kc.org/ CCCKC ''Kansas City'']

== Phone Numbers ==
[[Who To Call]]

In case of emergency, you should probably call 911 or 311, depending on the severity.

If you call 911 or 311, please write into board@ or info@pumpingstationone.org to let us know what has happened. We like knowing what has happened.

In case of emergency that is confusing and non-fatal such that you are uncomfortable calling emergency lines, you may call or text The Vulture. Possibly call and text The Vulture. (260) 358 - 7321

User:Muirrum

2026-02-18T00:44:29Z

Muirrum:

Systems administrator and electronics enthusiast. Ask me about my Gentoo Linux setup!

I like to fix things on the wiki when I find them. If I've made a mistake, poke me on Discord (same username).

Pumping Station One

2026-02-18T00:41:01Z

Muirrum: /* Communication */ 2025 -> 2026 board meetings

[[File:PS1 only logo.svg|frameless|right|128x128px|link=https://pumpingstationone.org/]]
[[File:The Alley Mark Thomas Instagram Tour.jpg|frameless|right|228x228px|link=https://www.instagram.com/p/DHQ4jS0iqDr/|Video tour of PS1 by The Alley's Mark Thomas]]
'''Chicago's Maker & Hacker Space since 2009,''' a 501(c)(3) nonprofit [[organization]].

📍 '''Location:''' [https://duckduckgo.com/?t=ffab&q=pumping%20station%20one&iaxm=maps&bbox=-87.70836905218115%2C41.9462433639542%2C-87.7041106923302%2C41.94432245649106&strict_bbox=1 3519 N. Elston Ave, Chicago, IL 60618]

📧 '''[mailto:info@pumpingstationone.org General Contact Email]'''

🫶 '''What is Pumping Station: One?''' We're a [https://www.makerspaces.com/what-is-a-makerspace/ maker & hacker space]. Watch a [https://www.instagram.com/p/DHQ4jS0iqDr/ video tour of PS1 by The Alley's Mark Thomas]. PS1 is a volunteer run place and community where people with an interest in arts, manufacturing, computing and technology can gather to work on projects while sharing ideas, equipment, and knowledge. [https://pumpingstationone.org/join/ Become a member] to get access to our space, tools, and community. Find out more [https://pumpingstationone.org/about/ on our general website].

🚲 '''I'm a guest, how do I visit?''' We have a live, guided tour for guests and prospective new members every Tuesday at 8 PM. It's a great time to learn about us, ask questions, and [https://pumpingstationone.org/join/ sign up for a membership]. Also, you can [https://players.cupix.com/p/nllihJB0 take a virtual tour]. In-person tours can also be arranged [mailto:info@pumpingstationone.org by request via email].

📅 '''Can I attend events if I'm not a member?''' Yes! Many of our events are open to the public, [https://pumpingstationone.org/events/ please check out our events calendar].

ℹ️ '''[[Membership Troubleshooting|Problems with your membership?]]'''

👯 '''Anyone there?''' Use [https://shopmon.pumpingstationone.org ShopMon] to see real-time activity at the space.

{| style="width:100%; margin-bottom:2px;" cellpadding="5"
|-
| valign="top" |

{| class="wikitable" style="width=100%"
! colspan="2" |[[Area Hosts]]
|-
|'''General'''
|[[:Category:General_Area|Info]], [https://pumpingstationone.org/events Events], [https://www.meetup.com/Pumping-Station-One/events Meetups]
|-
|'''CNC'''
|[[:Category:CNC|Info]]
|-
|'''Woodshop'''
|[[:Category:Wood_Shop|Info]]
|-
|'''Electronics'''
|[[:Category:Electronics|Info]], [http://www.google.com/calendar/render?cid=hkgq1nkid9up5e4oe9uacqdlic@group.calendar.google.com&ctz=America/Chicago Events]
|-
|'''Arts'''
|[[:Category:Arts|Info]]
|-
|'''Hot Metals'''
|[[:Category:Hot_Metals|Info]], [http://www.google.com/calendar/embed?src=tomjudge.com_cl3vcokea3rl5gfflp5d9putlo%40group.calendar.google.com&ctz=America/Chicago Events]
|-
|'''Cold Metals'''
|[[:Category:Cold_Metals|Info]]
|-
|'''Small Metals'''
|[[:Category:Small_Metals|Info]]
|-
|'''Kitchen'''
|[[:Category:Kitchen|Info]]
|-
|'''But wait, there's more!'''
|(someone should add them)]
|}

== About PS:One ==

* [[Frequently Asked Questions]]
* [[What is Pumping Station: One]]
* [[Contact Points]]
* [[Neighborhood Information]]
* [http://www.catb.org/jargon/html/H/hacker.html So who are hackers anyway?]
* [https://docs.google.com/drawings/d/1fSw_rkvtLdl2LviR44Uilo9n9bL3BDXxI3dH3_oju48/edit?usp=sharing 1st Floor Map At-a-Glance]

== Member Information ==
=='''New Members Start Here!'''==

* [[New Member Quick Start Guide]]
* [[New Member Orientation]]
* [https://membership.pumpingstationone.org Membership Website] (Sometimes called Wild Apricot or the member site. You can manage your profile, payments and membership level here)
* [[Member Manual]]
* [[Guest Building Access]]
* [[Administration|How do things get done around here?]]
* [[How Do I Get Authorized?|How do I get authorized?]]
* [[Recommended Gear/Kit]]

====Want to help?====
* [[How can I help]]

====Need help?====
* [[Do you need help]]

====What are we working on?====
* [[:Category:Projects|Member Projects]]
* [[:Category:Tutorials|Member Tutorials]]

====Hey, where can I get stuff?====
Check the [[Sources]] page for an ever-growing list of places where you can pick up wood, metal, etc.

'''How do I manage my membership and payments?'''

Check out the [[Member Management]] page for information about canceling or changing your membership.

== Community ==

Who are the members of PS:One? How do they communicate? What do they know about this whole social interwebs thing?

====[[Administration]]====

* [[The Board|Board of Directors]] - The points of contact for day-to-day corporate operations, but not for most tools, equipment and space utilization.
* [[:Category:Hosted Areas|Area Hosts]] - The main points of contact for the (currently 12) different areas of the space.
* [[Volunteer Positions|Volunteer Authorizers]] - contact info for the Volunteer Positions established by the Board.

==== Communication ====

*[[:Category:Meetings|Member Meetings]]
*[[Discord]]
*[[:Category:2026 Board Meetings|2026 Board Meetings]]
*[[Contact Points#Email Lists|Email Lists]]
*[[Contact Points#Social Networks|Social Networking]]
*[[Contact Points#Links|Other PS:One sites and online spaces]]
*[[Freshdesk]] - A help desk system that we use to track issues.
*[[Votes|Member Votes]] - How we do/buy/decide big things
*[[:Category:Policy|Policies]]
*[https://canvas.pumpingstationone.org/login/ldap Canvas LMS]

==[[Events]]==

*[http://www.google.com/calendar/embed?src=hhlp4gcgvdmifq5lcbk7e27om4%40group.calendar.google.com&ctz=America/Chicago PS:One Google Calendar]
*[http://www.meetup.com/Pumping-Station-One/ PS:One Meetup Group]
* [[:Category:Classes|Classes]]
*[[New events|How do I create an event?]]

| valign="top" |

==Things We Have==

How to do things, where to get things, what's in the area, and other general reference stuff you feel like sharing.

====Hardware====

*[[Facilities]]: A list of what has been made available, and what should soon be made available to members.
*[[:Category:Equipment|Tools and Equipment]] : All PS:One equipment, tools, authorization, safety, and repair information goes here.
*[[Sources]]: Where to get stuff: from Depots to dumpsters.
* [[:Category:Facilities|Building Facilities]]: How our building works.

====Other====

*[[Resources]]
*[[Administration#Important Documents|Important Documents and Files]]
* [[IT Infrastructure]]
*[[Supplies]] and other things purchased for day-to-day space needs
*[[Member Storage Registry]] tracks locker/shelf use

== What We Do ==
PS:One is a [[Do-ocracy]]. Here is some of what we do:

====Current Projects====
*[https://pumpingstationone.org/2024/09/commencing-fundraising-to-purchase-our-building/ Buying the building]
*Replacing our member management software

====[[:Category:Interest Groups|Interest Groups]]====
*[[NERP]] (Not Exclusively Raspberry Pi): Embedded Systems (biweekly)
*[[Beer Church]] (and Brewing Station: One): Beer appreciation and home brewing
*[[TOOOL Chicago]]: A monthly meetup about locks and lockpicking
*[[Python Office Hours]]: A biweekly meetup about python programming
*[[Electronic Music Mangling Group]]: A meetup about making and producing music, all experience levels welcome. Biweekly on Weds
*[[Wiki Maintenance]]: Maintaining the wiki and teach people how to help.
* [[Power Racing Team]]: The PS:One Power Racing Team - the tiny cars everywhere are our fault.
*[https://www.meetup.com/chicago-3d-printing-meetup-group Chicago 3D Printing Meetup]: A meetup about everything 3D printing related. Meets the last Wednesday of every month in the first floor lounge!

====Space Automation====

*[https://shopmon.pumpingstationone.org ShopMon] - Real time activity at the space

[[Discord]] Integration:

*[[Shopmon]] - what rooms are busy, and are the doors open?
*[[Propanebot]] -
*[[Tempbot]] - Reads temp/humidity in space areas
__NOTOC__
|}

User:Muirrum

2026-02-17T03:47:21Z

Muirrum: Created page with "# User:Muirrum Systems administrator and electronics enthusiast. Ask me about my Gentoo Linux setup."

# User:Muirrum

Systems administrator and electronics enthusiast. Ask me about my Gentoo Linux setup.