PS:1 Wiki Dev - User contributions [en]

Member Storage Registry

2019-02-02T19:01:27Z

Rbean: /* Catwalk Shelf Registry */ Removed Ron Bean from shelf C62

Full Members are allowed storage space, and may claim an unoccupied, unclaimed member storage locker or member storage shelf. A locker or shelf could be empty but still be claimed/occupied. Label your shelf or locker adequately.

If you find something on this page that seems inaccurate, Please contact the affected member or the General Area Host. Please do not edit other members' entries.

'''You should use the same name here that you have listed on [https://members.pumpingstationone.org the members site] so that we can verify your membership status. This will help you avoid your storage space getting ticketed and you having to do something about it later.'''

== Catwalk Shelf Registry ==

The catwalk is where the majority of our [[Systems]] infrastructure is located. Additionally, member shelves are on the catwalk.

'''Please do not store items on the catwalk, except on member shelves. Loose items will be ticketed'''

On the catwalk, numbering starts with the upper left shelf and goes down, then across. The top row is ignored because the opening is too obstructed to be used.

{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
|-
! Shelf No. !! Member Name
|-
| C1 || Ron Olson
|-
| C2 || Jennie P.
|-
| C3 || Mark
|-
| C4 || [[User:Wessing|Erik Wessing]]
|-
| C5 || Sam Paris
|-
| C6 || [[User:Adamstein|Adam Stein]]
|-
| C7 || Will McShane
|-
| C8 || Glenn Powers
|-
| C9 || Lyn Cole
|-
| C10 || Aushra Abouzeid
|-
| C11 || Ryan Pierce
|-
| C12 || Hilary Lee
|-
| C13 || Bo Driscoll (Michael Driscoll)
|-
| C14 || Jeff Kantarek
|-
| C15 || Ananda Stevens
|-
| C16 || Casey Olson
|-
| C17 || Shawn Blaszak
|-
| C18 || Ryan Treacy
|-
| C19 || [unoccupied]
|-
| C20 || Bao Nguyen
|-
| C21 || Ed Bennett
|-
| C22 || Anna Yu
|-
| C23 || Rhonda Jackson (and "PAPER FOR MEMBERS")
|-
| C24 || [[User:t440music|Tommy TBones Cramer]]
|-
| C25 || Rob Riggs (Colorado Rob)
|-
| C26 || Sky Nova
|-
| C27 || Bart Dring
|-
| C28 || Dan Locks
|-
| C29 || Burton Kent
|-
| C30 || Ludwig Oosthuizen
|-
| C31 || [[Will Phillips]]
|-
| C32 || [[User:Davidfell|David Fell]]
|-
| C33 || Elizabeth Koprucki
|-
| C34 || Jesse Seay
|-
| C35 || Ray Doeksen
|-
| C36 || [[user: jcmertz|Joe Mertz]]
|-
| C37 || Abel Greenwald
|-
| C38 || Peter Borah
|-
| C39 || Patrick Callahan
|-
| C40 || [[User:Hef|Hef]]
|-
| C41 || Kathryn Born
|-
| C42 || Kari Danek
|-
| C43 || Sevin Straus
|-
| C44 || [[User:Lorxus|Paul Rapoport]]
|-
| C45 || Eric Stein
|-
| C46 || Bryanna Denney
|-
| C47 || Peter Antor
|-
| C48 || Michael Skilton
|-
| C49 || Matt Triano
|-
| C50 || Steve Farkas
|-
| C51 || [[user:knitmeapony|Laurie]]
|-
| C52 || Gerald
|-
| C53 || Sam Chen
|-
| C54 || [[user:Carlfk|Carl Karsten]]
|-
| C55 || Andrew Camardella
|-
| C56 || Mohamed Dardiri
|-
| C57 || Daniel Baltudis
|-
| C58 || [[User:Skm|Sheila Miguez]]
|-
| C59 || Brian Chojnowski
|-
| C60 || Brian Cuocci
|-
| C61 || Shae (Shawn Kurko)
|-
| C62 ||
|-
| C63 || Zlatan Klebic
|-
| C64 || [[User:justin|Justin T. Conroy]]
|-
| C65 || Alejandro Drexler
|-
| C66 || Eddie Muela
|}

=== Top Catwalk Shelf ===
These shelves are difficult to impossible to reach, but adventurous people store things there anyway. Here's their status, lettered left to right:
{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
|-
! Column !! Member Name
|-
| A || (unlabeled)
|-
| B || Ian Monroe
|-
| C || (unlabeled)
|-
| D || (unlabeled)
|-
| E || "Jeremy"
|-
| F || Tony Phelps and Tim Foley
|-
| G || Rochad
|-
| H || (unlabeled)
|-
| I || Randy C (empty)
|-
| J || (unlabeled)
|-
| K || (unlabeled)
|}

== General Work Area Shelves ==
In the general area, numbering starts with the upper left shelf and goes down, then across.

{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
|-
! Shelf No. !! Member Name
|-
| G1 || General Area Host Storage
|-
| G2 || Zack Sasnow
|-
| G3 || Peter McKnight
|-
| G4 || Ashley Borg
|-
| G5 || [[User:tucker|Tucker Tomlinson]]
|-
| G6 || Carlos Garcia
|-
| G7 || [[User:Mkeith|Matt Keith]]
|-
| G8 || [[User:andrewvaughan|Andrew Vaughan]]
|-
| G9 || Chris Iacullo
|-
| G10 || [[User:Ekaj|Jacob Snyder]]
|-
| G11 || [[User: Lishibird| Alisha Ciardi]]
|-
| G12 || [[User: Superchomp| Mark Creasy]]
|-
| G13 || [[User: Williamss| William Thompson]]
|-
| G14 || [[User: Lphk92 | Lucas Kushner]]
|-
| G15 ||
|}

== Locker Registry ==

The beige lockers between the general work area and the [[:Category:Cold_Metals|Cold Metals area]] were moved from the other side of the shop and stacked in a totally different order. They're more or less randomly numbered now, and some that were not part of the original scheme were added. Some are completely unlabeled.

If you move into one with a "Locker #xx" sticker on it, please note that in the table below.

{|Class="wikitable sortable" border="1" style="td { border: 1px solid #000000}"
|-
! Locker No. !! Member Name or (apparent contents)
|-
| L1 || Eric Beauchamp
|-
| L2 || Joseph W Juhnke
|-
| L3 || Charles Barker
|-
| L4 || Dan Thomson
|-
| L5 || Jonathan Bisson
|-
| L6 || Abel Greenwald
|-
| L7 || Earl Wood
|-
| L8 || Saul Weiner
|-
| L9 || Elizabeth Arundel (Anne)
|-
| L10 || Zach Ferraro
|-
| L11 || Kushal Som
|-
| L12 || [[:Category:Metal Casting|Metal Casting]]
|-
| L13 || Erik Funkhouser
|-
| L14 || Andy Larkin
|-
| L15 || Tool Cage Re-supply
|-
| L16 || [[user:mct|McTavish McArdle]]
|-
| L17 || Jonny Panic
|-
| L18 || Jeff Paules
|-
| L19 || Glenn Trussell
|-
| L20 || Terri Pittman
|-
| L21 || Wayne Openlander
|-
| L22 || Random short pieces of wood
|-
| T22 || Tim Bielawa
|-
| L23 || Cody Ryan
|-
| L24 || Drew Reynolds
|-
| L25 || Dubi Kaufman
|-
| L26 || Derek Bever
|-
| L27 || [unoccupied]
|-
| L28 || [unoccupied]
|-
| L29 || Mohamed
|-
| L30 || Nem Simeunovic
|-
| L31 || (Magazines)
|-
| L32 || Andy Muhic
|-
| L33 || [unoccupied]
|}

[[Category:Registry]]

ShapeOko2 CNC Router

2018-04-18T16:27:39Z

Rbean: /* Known Issues */

{{Template:EquipmentPage
|owner = PS:One
|serial = 5549
|certification = no
|hackable = yes
|model = ShapeOko 2 "The Works" version
|arrived = 2014
|doesitwork = yes
|contact = [[CNC|CNC Area Host]]
|where = [[Cold Metals]]
|value = $1000
|image = Shapeoko2.JPG
|hostarea = Cold Metals
}}

== Status ==
Operational as of Feb 23 2018. We have plans to move the switches to the outside of the new cabinet but the machine works and is connected to the cold metals computer.

== Authorization ==
Contact CNC Area Host for information on who conducts authorizations. If you are unable to get a response within 48hrs, post a request for authorization on the Pumping Station: One private Google Group.

== Tutorial ==

Tutorial on Fusion 360 to Shapeoko2 toolpath:
https://docs.google.com/document/d/1gzI5zgzzR_zRo9xr-SdSyWONMTeAq9PRUCJFRffS2FQ/edit?usp=sharing

== Operation ==
=== Setup ===
* With power off, ensure that you can move the carriage smoothly without it catching or having too much play. If it skips or bumps, clear out debris with a vacuum. (The machine generates a ton of dust, so having the vacuum on hand is helpful.)

* Check that the belts aren't loose.

* Ensure that all surfaces are clean so that the workpiece sits flat.

* If you will be cutting all the way through your piece, put a piece of scrap between the work surface and your piece to protect the surface. (No wasteboard on this machine.)

* Visually inspect the machine to make sure nothing is broken or out of wack.

* Plug in both the white (spindle) and black (Motion Control Board) power cords

=== Workpiece Setup ===
* Clamp work to the surface with the toe clamps (in the black bag or clear plastic tub.)
** Toe clamps need to be pushing down - so that the toe is angled down towards the workpiece - not angled up.
** After setting the height with the toe's rear bolt, lightly finger-tighten the bolt near the piece.
** Do not over-tighten: if you over-tighten, the force can pull up the work surface.
* Check the envelope of the machine to ensure it will not crash into the rear dust guard - the grid of the work surface does not necessarily correspond to the grid in Easel.
* The clamp down studs are 5mm.

=== Collet & Bit Setup ===
* Put the bit (1/8" shank) into the collet.
** The further in it goes, the more secure the bit is, but make sure that the flutes are not inside the collet.
** If the bit is too deep in the collet, it can bottom out inside the spindle when you begin to tighten the collet.
* Use 14mm wrenches (in the black bag) to tighten the collet. You don't need to over-tighten the collet - hand tighten, not gorilla tighten.

=== Carving with Easel ===
Easel is run in a browser, you must log in at Inventables http://easel.inventables.com/users/sign_in

* Select the correct material for the workpiece.
* Set the appropriate bit parameters (e.g. upcut, ⅛" shank, number of flutes, bit shape).
* Create your design, ensuring that you are leaving enough space from toe clamps.
* Click carve.
* Turn on the machine by pulling up on the button.
* Click "Unlock Without Homing." ("Home Machine" will send the machine to where it thinks is home.)
* Home the machine: align the endmill with the bottom left corner of the workpiece (or wherever you want to set as home). Bring the bit down to just touch the workpiece.
** (You will need to reset the Z every operation. The machine loses Z calibration after each run, though it keeps XY home information.)
* Click "Confirm home position"
* Set the spindle speed with the control knob to desired speed.
* Click Carve.
* You may want to have the vacuum on hand to avoid overaccumulation of waste and dust. Avoid starting fires.

==Chip Load Calculation==
*[http://www.pdsspindles.com/engineering-speeds Bit Parameter Overview by PDS Spindles]
*[http://www.monstertool.com/monster_tool_calculators.html Monster Tools Chip Load Calculator]
*[http://www.pdsspindles.com/admin/modules/page_editor/uploads/image/Chip%20load%20for%20common%20tool%20diameters%20(Inches).jpg Chip Load Chart by PDS Spindles]

== Known Issues ==
* You will need to reset the Z after every carve operation. The machine loses Z calibration after each run, though it keeps XY home information.
* If you're having issues connecting to the Arduino, reboot the PC. It's good practice to start work by rebooting the PC regardless (especially if anyone else is still logged in).
* If the spindle jams on something and then won't restart, check the fuse in the spindle controller (on the back of the cabinet). There may be spares in the drawer under the machine. It is a 5x20mm glass fuse, should be 6A but we've been using 5A because Home Depot stocks them.

== Modifications ==

== Maintenance ==
Past maintenance can be found under Discussion tab.

Items that still need work:

1. Waste board supports purchased and installed. Entire board is unsupported in the middle, causing it to sag. Recommend getting two $7 20mmx20mmx300mm extrusions (from Inventables or elsewhere) and T-nuts to support it in the middle (this is a common upgrade for this particular machine).

2. V-wheels/bearings on all axis need to be adjusted to a tighter tolerance. Some are not making contact..

== Documentation ==

[http://www.shapeoko.com/wiki/index.php/ShapeOko_2 ShapeOko 2 wiki] for assembly, use, and source files.

[http://www.shapeoko.com/wiki/index.php/G-Code GRBL G & M Codes] Great G and M-code library of GRBL-supported codes (worth familiarizing yourself with)

[https://github.com/grbl/grbl/wiki/Connecting-Grbl GRBL pins] GRBL pins described

[https://www.synthetos.com/project/grblshield/ GRBL board used] GRBL board

[https://www.shapeoko.com/wiki/index.php/Universal-G-Code-Sender Universal Gcode Sender]

[https://www.shapeoko.com/wiki/index.php/Carbide_Create Carbide Create CAD software]

== Authorized Users ==
{| class="wikitable" border="1"
! qualified member
! trained by
|-
| Elizabeth
| Herself as she built it
|-
| [[User:Sparr | Clarence Risher]]
| Elizabeth
|-
| [[User:tachoknight | Ron Olson]]
| Elizabeth
|-
| [[User:daroldhiga | Darold Higa]]
| Elizabeth
|-
| [[User:aaronmintz | Aaron Mintz]]
| Elizabeth
|-
| [[User:michaelsolheim | Michael Solheim]]
| Elizabeth
|-
| [[User:ericbeau | Eric Beauchamp]]
| Elizabeth
|-
| [[User:RogerMoore | Roger Moore]]
| Elizabeth
|-
| [[User:KoalaBro2 | Kyle Bieneman]]
| Elizabeth
|-
| [[User:rtystgeeke | Andrew Camardella]]
| Elizabeth
|-
| [[User:speedebikes | Todd Allen]]
| Elizabeth
|-
| [[User:sreicks | Sam Reicks]]
| Andrew Camardella
|-
| [[User:rdoeksen | Ray Doeksen]]
| Sevin Strauss
|-
| [[User:leonmf | Leon Grossman]]
| Sevin Strauss
|-
| [[User:ryantaylor | Ryan Taylor]]
| Leon Grossman
|-
| [[User:esp | Simon Pyle]]
| Sevin Strauss
|-
| [[User:esp | Ralph Brendler]]
| [[User:ad9581 | Arturo Duarte]]
|-
| [[User:esp | Jeremy fay]]
| [[User:ad9581 | Arturo Duarte]]
|-
| [[User:dannyblanchard | Danny Blanchard]]
| [[User:rtystgeeke | Andrew Camardella]]
|-
| [[User:Brianxc | Brian Carstensen]]
| Sevin Strauss
|-
|[[User:ajasani | Ashish Jasani]]
| Sevin Strauss
|-
|[[User:Daniel | Daniel Martinez]]
| Sevin Strauss
|-
|[[User:getavas | Gabe Tavas]]
| Sevin Strauss
|-
|}

[[Category:Fabrication]]
[[Category:Cold Metals]]
[[Category:Cold Metals]]

Neighborhood Information

2017-09-03T00:56:37Z

Rbean: /* Restaurants */

Information about the neighborhood surrounding PS:One.

: 3519 N. Elston
: Chicago, IL 60618-5617
: [http://osm.org/go/ZUfMF3s9W?way=163906604 openstreetmap]
: [https://goo.gl/maps/HOAuY google map]

=== Transportation ===

==== public transit ====
add info about distance to stops

[http://www.transitchicago.com/travel_information/trip_planner.aspx trip planner]

* [http://www.transitchicago.com/travel_information/station.aspx?StopId=15 Addison Blue Line]
* [http://www.transitchicago.com/travel_information/station.aspx?StopId=16 Addison Brown Line]
* [http://www.transitchicago.com/bus/82/ Kimball Bus]
* [http://www.transitchicago.com/bus/152/ Addison Bus] check the time! it stops early. weekdays: 5am-ish to 10pm-ish. weekends: 6am-ish to 9pm-ish

==== parking ====

parking in snow.

=== Restaurants ===

[https://mapsengine.google.com/map/u/0/viewer?authuser=0&hl=en&mid=z5ldqwRdR4Pg.k7KNUV_RuL9w restaurant map]

{| class="wikitable sortable"
! | Restaurant
! | Location
! | Notes
|-
| [https://www.facebook.com/cafetola/ Cafe Tola ] ||3324 N California Ave || Former location of Hot Doug's (California & Roscoe), known for their empanadas
|-
| Amani Cafe || 2949 W Belmont Ave || Yet another Kyrgyz restaurant. 0.5 miles, 10 minute walk. No vegetarian options.
|-
| Sunshine Restaurant || 3523 N Kedzie Ave || Across the street from PS1, Closes at 2pm
|-
| Chipotle || 3227 W Addison St ||
|-
| Subway || 3233 W Addison St ||
|-
| [http://www.sugarhillsbakery.com Sugar Hills Bakery] || 3235 West Addison St] || cafe with desserts and pastries. In the same shopping area as Chipotle and Subway.
|-
| Little Ceaser's || 3135 W Addison St || "If you want quick and don't care if it's actually food..."
|-
| White Castle || 3212 W Addison St ||
|-
| New China Buffet || 3246 W Addison St ||
|-
| [http://www.mirabellaitaliancuisine.com// Mirabella Italian Cuisine & Bar] || 3454 W Addison St ||Excellent food, but limited hours. Check the website.
|-
| Dapper's East || 2901 W Addison St (Addison Mall) || 7am-8pm
|-
| [https://www.pandaexpress.com/ Panda Express] || 2949 W Addison St (Addison Mall) ||
|-
| [http://numberonechopsuey.com/ #1 Chop Suey], [http://www.1chopsueyaddison.com/ also here] || 2550 W Addison St (Lane Plaza, next to McDonalds) ||
|-
| [http://littlebucharestbistro.com/ Little Bucharest Bistro] || 3661 N Elston Ave ||
|-
| [http://www.honeybutter.com/ Honey Butter Fried Chicken] || 3361 N Elston Ave ||
|-
| B'el || 3188 N Elston Ave || Formerly the Dragon Lady Lounge
|-
| [http://chiefoneillspub.com/ Chief O'Neil's] || 3471 N Elston Ave || Irish Pub
|-
| [http://www.parachuterestaurant.com/ Parachute Restaurant] || 3500 N Elston Ave || Korean, often busy; closed January 1-12 (winter break)
|-
| [http://snsdeli.com/ S&S Deli] || 3290 N Elston Ave ||
|-
| El Potosi || 3710 N Elston Ave || Mexican
|-
| [http://www.burritohouse.com/ Burrito House] || 3718 N Elston Ave || Used to be right by PS:1 and so convenient. Now they're so very far awaaaaaaaay...
|-
| [http://squarechicago.com/site/ Square Bar & Grill] || 2849 W Belmont Ave ||
|-
| [http://www.kumascorner.com/ Kuma's Corner] || 2900 W Belmont Ave ||
|-
| [http://mrpollochicago.com Mr Pollo] || 3026 W Belmont Ave ||
|-
| Burger King || 2828 W Belmont Ave ||
|-
| [http://www.porkshoppechicago.com/ Pork Shoppe] || 2755 W Belmont Ave ||
|-
| Buffet Castle || 3326 W Belmont Ave || Chinese Buffet
|-
|[http://joongboomarket.com/ Joong Boo Mart] || 3333 N Kimball Ave || Korean market, lunch counter in back
|-
| [http://traspasadaavondale.com/31117 Traspasada] || 3144 N California Ave || Mexican
|-
| Carnicerias Guanajuato || 3140 N California Ave || Mexican grocery with lunch counter
|-
| [http://www.baccipizza.com/ Bacci Pizza] || 4367 N Milwaukee Ave || 3 miles from PS1 - Prompt Delivery - Home of the 30" Ten Feed
|-
| Hero's Submarine Sandwich Shop || 3600 N Western Ave || Good reputation, dates to the 1940s
|-
| [http://www.90milescubancafe.com/ 90 Miles Cuban Cafe] || 3101 N Clybourn Ave ||
|-
| Popeyes, Wendys, Starbucks, Potbelly || Near Addison & Western ||
|-
| [http://revbrew.com/brewery Revolution Brewery] || 3340 N. Kedzie Ave. Chicago, IL 60618 [https://goo.gl/maps/d1noY] || Open to the public. check the hours. it has beer, not food.
|-
| [http://patspizza.info/ Pats Pizza] || || ChicagoLUG meetings get pizza from this place
|-
|}

* Everyone has their favorite Thai place.
** Dharma Garden, Always Thai, Thai Oscar, and Sticky Rice are popular and within driving distance. (Sticky rice is Northern Thai food and has many distinctive dishes.)
** Grub Hub lists 48 Thai restaurants (53 during lunch hours) that deliver to our location.

=== Stores ===

* [http://maps.google.com/maps?f=q&source=s_q&hl=en&geocode=&q=jewel&sll=41.943372,-87.703021&sspn=0.00822,0.016565&g=3354+N.+Elston&ie=UTF8&ll=41.948096,-87.706347&spn=0.008219,0.016565&z=16&iwloc=D Jewel]
** corner of Elston and Addison
* Target
** corner of Addison and Sacramento
* Home Despot
** corner of Addison and Kimball
* Kmart
** 3443 W Addison (773) 478-1334

Neighborhood Information

2017-08-27T23:32:42Z

Rbean: /* Restaurants */

Information about the neighborhood surrounding PS:One.

: 3519 N. Elston
: Chicago, IL 60618-5617
: [http://osm.org/go/ZUfMF3s9W?way=163906604 openstreetmap]
: [https://goo.gl/maps/HOAuY google map]

=== Transportation ===

==== public transit ====
add info about distance to stops

[http://www.transitchicago.com/travel_information/trip_planner.aspx trip planner]

* [http://www.transitchicago.com/travel_information/station.aspx?StopId=15 Addison Blue Line]
* [http://www.transitchicago.com/travel_information/station.aspx?StopId=16 Addison Brown Line]
* [http://www.transitchicago.com/bus/82/ Kimball Bus]
* [http://www.transitchicago.com/bus/152/ Addison Bus] check the time! it stops early. weekdays: 5am-ish to 10pm-ish. weekends: 6am-ish to 9pm-ish

==== parking ====

parking in snow.

=== Restaurants ===

[https://mapsengine.google.com/map/u/0/viewer?authuser=0&hl=en&mid=z5ldqwRdR4Pg.k7KNUV_RuL9w restaurant map]

{| class="wikitable sortable"
! | Restaurant
! | Location
! | Notes
|-
| [https://www.facebook.com/cafetola/ Cafe Tola ] ||3324 N California Ave || Former location of Hot Doug's (California & Roscoe), known for their empanadas
|-
| Amani Cafe || 2949 W Belmont Ave || Yet another Kyrgyz restaurant. 0.5 miles, 10 minute walk. No vegetarian options.
|-
| Sunshine Restaurant || 3523 N Kedzie Ave || Across the street from PS1, Closes at 2pm
|-
| Chipotle || 3227 W Addison St ||
|-
| Subway || 3233 W Addison St ||
|-
| [http://www.sugarhillsbakery.com Sugar Hills Bakery] || 3235 West Addison St] || cafe with desserts and pastries. In the same shopping area as Chipotle and Subway.
|-
| Little Ceaser's || 3135 W Addison St || "If you want quick and don't care if it's actually food..."
|-
| White Castle || 3212 W Addison St ||
|-
| New China Buffet || 3246 W Addison St ||
|-
| [http://www.mirabellaitaliancuisine.com// Mirabella Italian Cuisine & Bar] || 3454 W Addison St ||Excellent food, but limited hours. Check the website.
|-
| Dapper's East || 2901 W Addison St (Addison Mall) || 7am-8pm
|-
| [https://www.pandaexpress.com/ Panda Express] || 2949 W Addison St (Addison Mall) ||
|-
| [http://numberonechopsuey.com/ #1 Chop Suey], [http://www.1chopsueyaddison.com/ also here] || 2550 W Addison St (Lane Plaza, next to McDonalds) ||
|-
| [http://littlebucharestbistro.com/ Little Bucharest Bistro] || 3661 N Elston Ave ||
|-
| [http://www.honeybutter.com/ Honey Butter Fried Chicken] || 3361 N Elston Ave ||
|-
| B'el || 3188 N Elston Ave || Formerly the Dragon Lady Lounge
|-
| [http://chiefoneillspub.com/ Chief O'Neil's] || 3471 N Elston Ave || Irish Pub
|-
| [http://www.parachuterestaurant.com/ Parachute Restaurant] || 3500 N Elston Ave || Korean, often busy; closed January 1-12 (winter break)
|-
| [http://snsdeli.com/ S&S Deli] || 3290 N Elston Ave ||
|-
| El Potosi || 3710 N Elston Ave || Mexican
|-
| [http://www.burritohouse.com/ Burrito House] || 3718 N Elston Ave || Used to be right by PS:1 and so convenient. Now they're so very far awaaaaaaaay...
|-
| [http://squarechicago.com/site/ Square Bar & Grill] || 2849 W Belmont Ave ||
|-
| [http://www.kumascorner.com/ Kuma's Corner] || 2900 W Belmont Ave ||
|-
| [http://mrpollochicago.com Mr Pollo] || 3026 W Belmont Ave ||
|-
| Burger King || 2828 W Belmont Ave ||
|-
| [http://www.porkshoppechicago.com/ Pork Shoppe] || 2755 W Belmont Ave ||
|-
| Buffet Castle || 3326 W Belmont Ave || Chinese Buffet
|-
|[http://joongboomarket.com/ Joong Boo Mart] || 3333 N Kimball Ave || Korean market, lunch counter in back
|-
| Carnicerias Guanajuato || 3140 N California Ave || Mexican grocery with lunch counter
|-
| [http://www.baccipizza.com/ Bacci Pizza] || 4367 N Milwaukee Ave || 3 miles from PS1 - Prompt Delivery - Home of the 30" Ten Feed
|-
| Hero's Submarine Sandwich Shop || 3600 N Western Ave || Good reputation, dates to the 1940s
|-
| [http://www.90milescubancafe.com/ 90 Miles Cuban Cafe] || 3101 N Clybourn Ave ||
|-
| Popeyes, Wendys, Starbucks, Potbelly || Near Addison & Western ||
|-
| [http://revbrew.com/brewery Revolution Brewery] || 3340 N. Kedzie Ave. Chicago, IL 60618 [https://goo.gl/maps/d1noY] || Open to the public. check the hours. it has beer, not food.
|-
| [http://patspizza.info/ Pats Pizza] || || ChicagoLUG meetings get pizza from this place
|-
| Taqueria Traspasada || 3144 N California Ave [https://goo.gl/maps/lMyqT] ||
|-
|}

* Everyone has their favorite Thai place.
** Dharma Garden, Always Thai, Thai Oscar, and Sticky Rice are popular and within driving distance. (Sticky rice is Northern Thai food and has many distinctive dishes.)
** Grub Hub lists 48 Thai restaurants (53 during lunch hours) that deliver to our location.

=== Stores ===

* [http://maps.google.com/maps?f=q&source=s_q&hl=en&geocode=&q=jewel&sll=41.943372,-87.703021&sspn=0.00822,0.016565&g=3354+N.+Elston&ie=UTF8&ll=41.948096,-87.706347&spn=0.008219,0.016565&z=16&iwloc=D Jewel]
** corner of Elston and Addison
* Target
** corner of Addison and Sacramento
* Home Despot
** corner of Addison and Kimball
* Kmart
** 3443 W Addison (773) 478-1334

Neighborhood Information

2017-08-25T15:55:54Z

Rbean: /* Restaurants */

Information about the neighborhood surrounding PS:One.

: 3519 N. Elston
: Chicago, IL 60618-5617
: [http://osm.org/go/ZUfMF3s9W?way=163906604 openstreetmap]
: [https://goo.gl/maps/HOAuY google map]

=== Transportation ===

==== public transit ====
add info about distance to stops

[http://www.transitchicago.com/travel_information/trip_planner.aspx trip planner]

* [http://www.transitchicago.com/travel_information/station.aspx?StopId=15 Addison Blue Line]
* [http://www.transitchicago.com/travel_information/station.aspx?StopId=16 Addison Brown Line]
* [http://www.transitchicago.com/bus/82/ Kimball Bus]
* [http://www.transitchicago.com/bus/152/ Addison Bus] check the time! it stops early. weekdays: 5am-ish to 10pm-ish. weekends: 6am-ish to 9pm-ish

==== parking ====

parking in snow.

=== Restaurants ===

[https://mapsengine.google.com/map/u/0/viewer?authuser=0&hl=en&mid=z5ldqwRdR4Pg.k7KNUV_RuL9w restaurant map]

{| class="wikitable sortable"
! | Restaurant
! | Location
! | Notes
|-
| [https://www.facebook.com/cafetola/ Cafe Tola ] ||3324 N California Ave || Former location of Hot Doug's (California & Roscoe), known for their empanadas
|-
| Amani Cafe || 2949 W Belmont Ave || Yet another Kyrgyz restaurant. 0.5 miles, 10 minute walk. No vegetarian options.
|-
| Sunshine Restaurant || 3523 N Kedzie Ave || Across the street from PS1, Closes at 2pm
|-
| Chipotle || 3227 W Addison St ||
|-
| Subway || 3233 W Addison St ||
|-
| [http://www.sugarhillsbakery.com Sugar Hills Bakery] || 3235 West Addison St] || cafe with desserts and pastries. In the same shopping area as Chipotle and Subway.
|-
| Little Ceaser's || 3135 W Addison St || "If you want quick and don't care if it's actually food..."
|-
| White Castle || 3212 W Addison St ||
|-
| New China Buffet || 3246 W Addison St ||
|-
| [http://www.mirabellaitaliancuisine.com// Mirabella Italian Cuisine & Bar] || 3454 W Addison St ||Excellent food, but limited hours. Check the website.
|-
| Dapper's East || 2901 W Addison St (Addison Mall) || 7am-8pm
|-
| [https://www.pandaexpress.com/ Panda Express] || 2949 W Addison St (Addison Mall) ||
|-
| [http://numberonechopsuey.com/ #1 Chop Suey], [http://www.1chopsueyaddison.com/ also here] || 2550 W Addison St (Lane Plaza, next to McDonalds) ||
|-
| [http://littlebucharestbistro.com/ Little Bucharest Bistro] || 3661 N Elston Ave ||
|-
| [http://www.honeybutter.com/ Honey Butter Fried Chicken] || 3361 N Elston Ave ||
|-
| [http://dragonladylounge.com/ Dragon Lady Lounge] || 3188 N Elston Ave || Open!
|-
| [http://chiefoneillspub.com/ Chief O'Neil's] || 3471 N Elston Ave || Irish Pub
|-
| [http://www.parachuterestaurant.com/ Parachute Restaurant] || 3500 N Elston Ave || Korean, often busy; closed January 1-12 (winter break)
|-
| [http://snsdeli.com/ S&S Deli] || 3290 N Elston Ave ||
|-
| El Potosi || 3710 N Elston Ave || Mexican
|-
| [http://www.burritohouse.com/ Burrito House] || 3718 N Elston Ave || Used to be right by PS:1 and so convenient. Now they're so very far awaaaaaaaay...
|-
| [http://squarechicago.com/site/ Square Bar & Grill] || 2849 W Belmont Ave ||
|-
| [http://www.kumascorner.com/ Kuma's Corner] || 2900 W Belmont Ave ||
|-
| [http://mrpollochicago.com Mr Pollo] || 3026 W Belmont Ave ||
|-
| Burger King || 2828 W Belmont Ave ||
|-
| [http://www.porkshoppechicago.com/ Pork Shoppe] || 2755 W Belmont Ave ||
|-
| Buffet Castle || 3326 W Belmont Ave || Chinese Buffet
|-
|[http://joongboomarket.com/ Joong Boo Mart] || 3333 N Kimball Ave || Korean market, lunch counter in back
|-
| Carnicerias Guanajuato || 3140 N California Ave || Mexican grocery with lunch counter
|-
| [http://www.baccipizza.com/ Bacci Pizza] || 4367 N Milwaukee Ave || 3 miles from PS1 - Prompt Delivery - Home of the 30" Ten Feed
|-
| Hero's Submarine Sandwich Shop || 3600 N Western Ave || Good reputation, dates to the 1940s
|-
| [http://www.90milescubancafe.com/ 90 Miles Cuban Cafe] || 3101 N Clybourn Ave ||
|-
| Popeyes, Wendys, Starbucks, Potbelly || Near Addison & Western ||
|-
| [http://revbrew.com/brewery Revolution Brewery] || 3340 N. Kedzie Ave. Chicago, IL 60618 [https://goo.gl/maps/d1noY] || Open to the public. check the hours. it has beer, not food.
|-
| [http://patspizza.info/ Pats Pizza] || || ChicagoLUG meetings get pizza from this place
|-
| Taqueria Traspasada || 3144 N California Ave [https://goo.gl/maps/lMyqT] ||
|-
|}

* Everyone has their favorite Thai place.
** Dharma Garden, Always Thai, Thai Oscar, and Sticky Rice are popular and within driving distance. (Sticky rice is Northern Thai food and has many distinctive dishes.)
** Grub Hub lists 48 Thai restaurants (53 during lunch hours) that deliver to our location.

=== Stores ===

* [http://maps.google.com/maps?f=q&source=s_q&hl=en&geocode=&q=jewel&sll=41.943372,-87.703021&sspn=0.00822,0.016565&g=3354+N.+Elston&ie=UTF8&ll=41.948096,-87.706347&spn=0.008219,0.016565&z=16&iwloc=D Jewel]
** corner of Elston and Addison
* Target
** corner of Addison and Sacramento
* Home Despot
** corner of Addison and Kimball
* Kmart
** 3443 W Addison (773) 478-1334

Shopbot PRS CNC router

2017-08-09T21:00:49Z

Rbean: /* Shopbot PRS #10108 96-48 */

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = yes
|hackable = no
|model = Shopbot PRS #10108 96-48
|arrived = 2014
|image = Shopbot.jpg
|doesitwork = yes
|contact = [[CNC|CNC Area Host]]
|where = TBD
|value = $16000
|hostarea = CNC
}}
= Shopbot PRS #10108 96-48 =
http://www.shopbottools.com/mProducts/prSstandard.htm
Nominal Cutting Area 96"x 48"x 6" (2.44m x 1.22m x .15m)
Total Movement Area 102" x 50" x 8" (2.59m x 1.27m x .20m)

The spindle uses ER25 collets. These eventually wear out, so check before using them. Some people buy their own collets.

=Status history=
June 2017: There is an intermittent break in the wiring for the Z-axis Zero Plate. Check for continuity before using (the #1 input should light up on screen when you touch the contacts together). It usually works near the front of the table, but not halfway back. This will get fixed eventually, but it's a good idea to be in the habit of checking.

12/27/16 - Fixed Shopbot x-axis homing. The cable had been pulled on hard enough that some of the conductors broke inside the cable. It has been spliced, soldered, and heatshrinked back together.

= How to Get Authorized =

'''Authorization for this tool by authorized proctors only.''' This means you cannot get authorized by just anyone who is already authorized. You can only get authorized by a few people, the proctors listed below.

Authorization sessions are scheduled roughly monthly. Check the [https://www.meetup.com/Pumping-Station-One/events/ Meetup calendar] for upcoming authorizations. If no ShopBot sessions are currently scheduled, ask on the [https://groups.google.com/group/pumping-station-one/ Google Group].

Be aware that this authorization consists of two parts; the first session is a classroom session that will cover the software required and introduce you to the essential settings and chip-load calculation, and the second part, scheduled separately, is a hands-on class.

== Authorized Proctors ==
{| class="wikitable" border="1"
|-
|Elizabeth Koprucki
|Danger Committee
|-
|Bart Dring
|Danger Committee
|-
|Ryan Pierce
|Danger Committee
|-
|Nathan Ellis
|Danger Committee
|-
|Michael Skilton
|Danger Committee
|-
|Khoi Nguyen
|Michael Skilton
|-
|Andrew Camardella
|Elizabeth Koprucki
|-
|Matt Meshulam
|Andrew Camardella
|-
|}

== How to Become an Authorized Proctor ==
Get an ok from the area host. Successfully run an authorization supervised by an authorized proctor.
It's recommended that initial authorizations be limited to 2 or less.

= Documentation =

[[File:Shopbotassembly.pdf|Shopbotassembly.pdf]]

[[File:Squaringshopbot.pdf|Squaring the ShopBot]]

[[File:Programming_handbook.pdf|Programming Handbook]]

[[File:PRS Maintenance Schedule.pdf|Maintenance Schedule]]

[[File:ShopBot_USB_Connection_Troubleshoot.pdf]] - USB Troubleshooting Guide

[[File:ShopBot_Tech_Support_FAQ_2016_09_12.pdf]] - Tech Support FAQ

[[File:SBG00142 User Guide 2013 05 01.pdf|SBG00142 User Guide 2013 05 01.pdf]] - User Guide

[[File:B17P.763_Schematic.pdf]] - Omer Nail Gun Documentation

[http://www.shopbottools.com/ShopBotDocs/files/quick%20start%20guide%202013%2007%2023.pdf QuickStart]

X, Y, Z probe: https://pumpingstationone.org/2015/09/xyz-finder-for-the-shopbot/

[http://drshopbot.com/index.php?title=Main_Page "Dr Shopbot" wiki]

[http://drshopbot.com/index.php?title=MaintainingConnection "Maintaining Connections"]

= Tutorials =
[https://www.youtube.com/watch?v=xWCZfYHOYWw Part 1 of our Shopbot Authorization] - This is available as a refresher only. You still need to go to the class when it happens to get access to the hands-on Part 2.

[http://www.woodguide.org/files/2014/07/CNCrouter_bit_basics.pdf Router Bit Basics for CNC - VERY USEFUL]

[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Threads on Member List]

[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Forum]

[https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ Overview of Cut Load calcualtions for setting bit feed and speed rates]

== Software Tool Chain ==
*Illustrator
*Inkscape
*Vectric Aspire
**Allows for 2D and 3D linework and toolpath creation
**Only available on the Shapeoko Computer
*Vectric V-Carve Makerspace Edition
**Allows for 2D linework and toolpath creation
**Allows at home use of V-Carve - output only at PS1
**Our Makerspace Code is: E4793-F6472-BB9E5-9B114-3FEEB-73649-16F4F
*Autodesk Fusion 360
**The ShopBot computer does not have this and may not be fast enough to run it.
**You '''MUST''' use the custom post-processor below. Otherwise, you will bypass the safety check to make sure the spindle really is running!
**For local '''Windows''', to install this on your local computer:
***Unzip and install this in C:\Users\YourName\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts
***Note that AppData is often a hidden folder!
***Inside Fusion 360, when you select Actions / Post Process, under Configuration Folder, hit Setup and select Use Personal Posts.
**For local '''Mac'''
*** Unzip and install in Macintosh HD> Users> USERNAME> Autodesk> Fusion 360 CAM> Posts
*** In Fusion 360, when you select Actions > Post Process, under Settings select Personal Posts for the Source
**For '''Cloud'''
*** Open Fusion 360 and navigate to Libraries > Assets in the Data Panel.
*** Double click the Assets > CAMPosts folder to enter it.
*** Use the Upload button to upload the desired post processor from your local machine to the Assets > CAMPosts folder. This will upload the post to the cloud and allow you to access it anywhere you may login to your Fusion 360 account through My Cloud Posts.
*** After enabling cloud libraries in Fusion 360, you will be able to access your cloud post processor library by setting the Configuration Folder (Windows) or Source (Mac) to My Cloud Posts. Both of these dialog boxes are shown below. You will then be able to select the Cloud post you uploaded in the Post Configuration field (Windows) or the Post Processor field (Mac).
====Chip Load Calculation====
*[http://www.pdsspindles.com/engineering-speeds Bit Parameter Overview by PDS Spindles]
*[http://www.monstertool.com/monster_tool_calculators.html Monster Tools Chip Load Calculator]
*[http://www.pdsspindles.com/admin/modules/page_editor/uploads/image/Chip%20load%20for%20common%20tool%20diameters%20(Inches).jpg Chip Load Chart by PDS Spindles]
*[https://groups.google.com/forum/#!searchin/pumping-station-one/makerspace$20edition/pumping-station-one/cTwfUHxESjU/7m_lI8UWCgAJ How to install Makerspace Version]

== User Tips & Troubleshooting Reports ==
[http://www.sgstool.com/PDF-speedfeeds/SGS-Speeds-Feeds-GP.pdf Some feed and speed recommendations for small bits]

Add your experiences with feeds and speeds or other tips here:
[[Shopbot_User_Tips]]

Add troubleshooting reports here:
[[Shopbot_Troubleshooting_Reports]]

=== Materials ===

* [[Shopbot_PRS_CNC_router/Aluminium|Aluminium]]
* [[Shopbot_PRS_CNC_router/Brass|Brass]]
* [[Shopbot_PRS_CNC_router/Wood|Wood]]

== Authorization Checklist ==

This is here as a checklist for proctors to follow when authorizing people. It can also help remind you of things after you are authorized. Just reading this does not authorizing you.

* How to get authorized
** Watch [http://www.meetup.com/Pumping-Station-One/ the meetup group] for a recurring class on the second Thursday and last Sunday of the month. Sometimes check [https://groups.google.com/forum/#!forum/pumping-station-one the forum] for announcements or ask on the forum if no announcements have been made for a few weeks.

* Authorization group size
** There is no cap to the software instruction preceding the machine usage portion of the class. If you come to this portion it is easier to get fully authorized at a later date.
** 3 machine users - each person will run a job (~1/2 hr each) and everyone will assist each other in completing a job profile and pocket cut. You must be present for the entire authorization

* Safety
** Safety Glasses
** Hearing Protection
** Dust Protection

* What can go wrong (and what to do)

* How does machine work
** Axes
** Motors
** Spindle

* Daily Maintenance
** Spindle bearing warm up.
*** The "C5" warm up routine should be run on the first job of the day. It runs the spindle at 3 speeds for 3 minutes each to warm up the bearings. (When it doubt, warm it up)

* Extended Maintenance
** See maintenance schedule file under documentation.
** Grease the racks
** Use Grease type: Manual states any type is safe there is some in the draw

* Machine Control
** Turn on sequence
*** Log into computer
*** Turn on Shopbot big red and yellow twist switch (see zeroing below)
*** Insert Key and turn to "engaged" position.
*** The VDF should light up, the spindle fan should be on.
*** Start "Shopbot 3" program.
*** Open Tools...Spindle RPM Control menu (to allow RPM control)
**** Make sure collet is tightened or no tool or nut is installed
**** Run the C5 warm up routine
** Jogging
*** Keypad
*** Arrow Keys + Page Up, Page Down (ctrl for fast jog)

* CAM Software
** Vectric V Carve
** Just the basics...separate class for advanced V Carve.
** Online videos

* Running your Job
** Zeroing X & Y
*** With machine off slow push gantry towards X0 until it hits hard stops (optional)
*** Turn on big red switch while still holding gantry.
*** Jog machine away from X0 Y0 so machine will find switches
*** Click X, Y zero button.
** Zeroing Z (top of work piece)
*** Jog over your work piece
*** Place Z zero plate on work piece under the bit
*** Place clip on bit
*** Test connection by touching plate to bit and watch for light #1 to light
*** Click the Z 0 button (it will touch off twice!!!)
*** If Z is critical, you may want to verify that your bit has been zeroed properly by using a "MZ,0" command over the surface you have zeroed the bit to. Repeat zeroing if not correct.

* Waste Board and clamping

* Collets, Bits, Feeds and Speeds
** Feeds and Speeds
*** Use a Cut Load Calculator to determine which feeds and speeds you should be using for your specific bits. An overview is avaialble at: [https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ]
** Collets
*** We currently have collets for 1/2, 1/4, 3/16 and 1/8" shank bits.
*** Try to keep them clean and store them away from dust between uses. Dust between the gaps will produce runout. The drawer mounted under the Shopbot is the right place to store these items.
*** If the collet nuts are not threading smoothly try cleaning the threads with a small brush, spindle threads as well.
** Bits
*** Use bits designed for the material you are cutting. Don't just steal a bits from the Bridgeport. They won't do a good job and will probably overheat.
*** For cutting out things, use the smallest appropriate bit. Using a 1/2" bit to cutout will just create a lot of mess.

* ShopBot should not be used for...
** Metals other than aluminum
** Cutting anything that requires coolant or lubricant (it will ruin the waste board)
** Ripping lumber (use the table saw)
** Thickness Planning (Use the planner if you can)
** Drilling holes with drill bits (a small end mill works better)

* How to leave the machine (be excellent)
** Machine
*** Home the machine to X0, Y0
*** Turn off both switches
*** Remove Key
*** Remove bit and collet.
*** Place both collet wrenches on top of electronics box
*** clean up work area
*** Smooth out waste board if you puckered it at all.
*** Check if the dust collector needs to be emptied

** Post a picture on our [[Blog]] please!

== Use checklist ==

PS1 is experimenting with the use of checklists to encourage the safe use and proper care of tools in the workspace. The latest version of the [[checklists]] for this tool is stored as a [https://docs.google.com/document/d/1L78Rr_T8vhV8XZLRReKIWYXAyOnS8CLfJmAxehVeThU/edit Google Doc] that can be edited by anyone. If you make changes, update the effective date at the bottom of the document. Print a new copy, and replace the old one.

Physical checklists are necessarily constrained in length. Following is a more extensive pre-flight checklist:

* Did you home the machine?
* Is the dust collect gate open?
* Are you sure you have the right X, Y orientation for your file and material?
* Did you set the proper X,Y zero for your work piece on the Shopbot.
* Is the correct bit installed and tight?
* Is the key in and turned on?
* Is the dust skirt set right so it does not get smashed.
* Is Z zero set to the work top?
* Is the touch plate and clip returned.
* Is the material properly secured
* Safety glasses, hearing protection on.
* Start the job with the E-Stop ready to hit.
* Turn on dust collector ( I like to wait so I can hear that things sound right on the shopbot before turning on the collector)

= Authorized Users =
{| class="wikitable" border="1"
! Authorized Member
! Trained By
|-
|Elizabeth Koprucki
|Danger Committee
|-
|Bart Dring
|Danger Committee
|-
|Ryan Pierce
|Danger Committee
|-
|Nathan Ellis
|Danger Committee
|-
|Michael Skilton
|Danger Committee
|-
|Arturo Duarte
|Bart
|-
|Derek Bever
|Bart
|-
|Everett
|Bart
|-
|Vincent Colombo
|Bart
|-
|[[User:justin|Justin T. Conroy]]
|Bart
|-
|Hugh Sato
|Bart
|-
|Sergey Nekrasov
|Bart
|-
|Valerie Moore
|Bart
|-
|Patrick Schless
|Bart
|-
|Tom Forajter
|Bart
|-
|Todd Allen
|Michael Skilton
|-
|[[User:RogerMoore|Roger Moore]]
|Bart
|-
|Tim Saylor
|Bart
|-
|Hef
|Bart
|-
|Jeff McBride
|Bart
|-
| Maxwell ?
| Michael Skilton
|-
|Samuel Swope
|Michael Skilton
|-
| Khoi Nguyen
|Michael Skilton
|-
|Brian Chojnowski
|Michael Skilton
|-
|Josh Cooper
|Bart
|-
|Andrew Camardella
|Bart
|-
|Adam Glick
|Bart
|-
|Yehuda Braun
|Bart
|-
| Jeff Kantarek
| Michael Sklton
|-
| Justin Miles
|Michael Skilton
|-
|Will Garza
|Michael Skilton
|-
|Clarence Risher
|Michael Skilton
|-
|[[User:ericbeau|Eric Beauchamp]]
|Michael Skilton
|-
|[[User:Jason|Jason]]
|Michael Skilton
|-
|Eric Stein
|Bart
|-
|Colin Parsons
|Bart
|-
|David Ditzler
|Bart
|-
|Ray Doeksen
|Bart Dring
|-
|Ron Bean
|Khoi Nguyen & Michael Skilton
|-
| Thomas Wright
|Khoi Nguyen & Michael Skilton
|-
|David Morton
|Bart Dring
|-
|Ron Olson
|Bart Dring
|-
|Kyle Bieneman
|Bart Dring
|-
|[[User:amishhammer|Tom Judge]]
|Michael Skilton
|-
|Bryan Gleason
|Michael Skilton
|-
|Dave Schact
|Ryan Pierce
|-
|Chris Agocs
|Andrew Camardella
|-
|[[user:kuroishi | Doorman Dave ]]
|Andrew Camardella
|-
|Alec Weege
|Andrew Camardella
|-
|Sam Reicks
|Andrew Camardella
|-
|Touly Phiachantharath
|Andrew Camardella
|-
|Lucas Goossen
|Andrew Camardella
|-
|[[user:Tina|Tina C]]
|Andrew Camardella
|-
|Ryan Neuman
|Andrew Camardella
|-
|Dan Loeser
|Andrew Camardella
|-
|Ben Bogler
|Andrew Camardella
|-
|Erin Banwell
|Ryan Pierce
|-
|Brad Rios
|Ryan Pierce
|-
|Aaron Carlock
|Andrew Camardella
|-
|James Villalpando
|Andrew Camardella
|-
|Connor Jansen
|Andrew Camardella
|-
|Tait Leswing
|Bart
|-
|Raj Perera
|Khoi Nguyen
|-
|Keith Hultman
|Andrew Camardella
|-
|David Srebro
|Andrew Camardella
|-
|[[user:Wessing | Erik Wessing ]]
|Andrew Camardella
|-
|Leeswann Bolden
|Andrew Camardella
|-
|Josh Myers
|Andrew Camardella
|-
|Kurt Ziegel
|Andrew Camardella
|-
|Glenn Powers
|Andrew Camardella
|-
|[[User:mqudsi|Mahmoud Al-Qudsi]]
|Andrew Camardella
|-
|Casey Olson
|Khoi
|-
|Mike Jones
|Andrew Camardella
|-
|Aaron Feigen
|Andrew Camardella
|-
|Jim Baker
|Andrew Camardella
|-
|Eric Reusche
|Khoi Nguyen
|-
|Ralph Brendler
|Andrew Camardella
|-
|John McDonald
|Andrew Camardella
|-
|Alex Al-Hamdan
|Andrew Camardella
|-
|Eugene Liokumovich
|Andrew Camardella
|-
|Randal Cox
|Andrew Camardella
|-
|Simon Pyle
|Andrew Camardella
|-
|Jean Michel Crettaz
|Andrew Camardella
|-
|Brian Zable
|Andrew Camardella
|-
|Daylan Dufelmeier
|Andrew Camardella
|-
|Steve Kruse
|Matt Meshulam
|-
|Mike Mandrea
|Andrew Camardella
|-
|Jeff Zelnio
|Andrew Camardella
|-
|Aaron Stoddart
|Matt Meshulam
|-
|Koun Park
|Matt Meshulam
|-
|Dan Baltudis
|Matt Meshulam
|-
|Curtiss Cooke
|Matt Meshulam
|-
|Jeannine Chuchan
|Matt Meshulam
|-
|Brennan Koziarz
|Matt Meshulam
|-
|Brandon Love
|Matt Meshulam
|-
|Mike Vitale
|Matt Meshulam
|-
|Emma Purola
|Matt Meshulam
|-
|Chris Kohl
|Matt Meshulam
|-
|Daniel Sojka
|Matt Meshulam
|-
|Naguib Azab
|Matt Meshulam
|-
|Mark Zumwalt
|Matt Meshulam
|-
|Joseph Juhnke
|Andrew Camardella
|-
|Alex Berkowitz
|Andrew Camardella
|-
|Andy Muhic
|Matt Meshulam
|-
|Adam Stein
|Matt Meshulam
|-
|John Farmer
|Matt Meshulam
|-
|Joshua Havenga
|Matt Meshulam
|-
|[[user:mct|McTavish McArdle]]
|Matt Meshulam
|-
|Frank Bowles
|Matt Meshulam
|-
|Joe Iklov
|Matt Meshulam
|-
|Matthew Quigley
|Matt Meshulam
|-
|Derwin Umali
|Andrew Camardella
|-
|Doug Mahoney
|Matt Meshulam
|-
|Rob Robinson
|Matt Meshulam
|-
|Dan Sloboda
|Matt Meshulam
|-
|Jacob Collins
|Matt Meshulam
|-
|Donald Wells
|Matt Meshulam
|-
|[[user:jim|Jim Brink]]
|Matt Meshulam
|-
|[[user:mkeith|Matt Keith]]
|Matt Meshulam
|-
|[[user:vmorris|Victoria Morris]]
|Matt Meshulam
|-
|[[user:bobsabayesian|Bob Loos]]
|Matt Meshulam
|-
|[[user:muthpete|Peter Muth]]
|Matt Meshulam
|-
|[[user:guijemont|Guillaume Emont]]
|Matt Meshulam
|-
|[[user:erikthefunk|Erik Funkhouser]]
|Matt Meshulam
|-
|[[user:mrashes|Max Rashes]]
|Matt Meshulam
|-
|[[user:panchan99|Juan Ramos]]
|Matt Meshulam
|-
|[[user:Justjoe|Joe Dowling]]
|Matt Meshulam
|-
|[[user:smash|Ashley Matrisciano]]
|Matt Meshulam
|-
|Ryan Kapp
|Matt Meshulam
|-
|Idris Raja
|Matt Meshulam
|-
|[[user:Dannyblanchard|Danny Blanchard]]
|Matt Meshulam
|-
|Aaron Mintz
|Matt Meshulam
|-
|[[user:ianstubbs|Ian Stubbs]]
|Matt Meshulam
|-
|[[user:skynaya|Skylar Nova]]
|Matt Meshulam
|-
|Chris Ruhland
|Matt Meshulam
|-
|[[user:Jaypee|Jay Pee]]
|Matt Meshulam
|-
|[[user:Ryanmafi|Ryan Fiebing]]
|Matt Meshulam
|-
|[[user:sblaszak|Shawn Blaszak]]
|Matt Meshulam
|-
|[[user:tonyiacullo|Tony Iacullo]]
|Matt Meshulam
|-
|Mark Haughey
|Matt Meshulam
|-
|Chris Iacullo
|Matt Meshulam
|-
|Ian Monroe
|Matt Meshulam
|-
|Ashish Jasani
|Matt Meshulam
|-
|Kurt Gilman
|Matt Meshulam
|-
|Abel Greenwald
|Matt Meshulam
|-
|Vaidotas (Vai) Staugaitis
|Matt Meshulam
|-
|Leo Battikhi
|Matt Meshulam
|-
|Matt Schaid
|Matt Meshulam
|-
|Jamie Vollmer
|Matt Meshulam
|-
|Bhairavi Warke
|Matt Meshulam
|-
|Denis Kuznetsov
|Matt Meshulam
|-
|Brian Carstensen
|Matt Meshulam
|-
|Rob Dumas
|Matt Meshulam
|-
|Mark Weiser
|Matt Meshulam
|-
|Tom Burtonwood
|Matt Meshulam
|-
|Steve Madonna
|Matt Meshulam
|-
|Jason Araujo
|Matt Meshulam
|-
|Bruce Alan Mace
|Matt Meshulam
|-
|Molly Adamski
|Matt Meshulam
|-
|Jeremy Shaw
|Matt Meshulam
|-
|Sam Chen
|Matt Meshulam
|-
|John McBride
|Matt Meshulam
|-
|Adomas Tautkus
|Matt Meshulam
|-
|Tim Buckley
|Matt Meshulam
|-
|Martina Josimovska
|Matt Meshulam
|-
|James Jacobs
|Matt Meshulam
|-
|George Shaw
|Matt Meshulam
|-
|David Earl
|Matt Meshulam
|-
|[[User:pedrosk| Eduard Breuer]]
|Matt Meshulam
|-|-
|Matthew Kim
|Matt Meshulam
|-
|Corey Peoples
|Matt Meshulam
|-
|Paul Graham
|Matt Meshulam
|-
|Matt Grunstad
|Matt Meshulam
|-
|Rolf Scheidt
|Matt Meshulam
|-
|Arjun Sharma
|Matt Meshulam
|}

If you have been authorized but cannot log in, request to be added to the "ShopBot Authorized" Samba group (send an email to info (at) pumpingstationone.org with your username and the name of the person who certified you) so that your login works. If you don't have a log-in on https://members.pumpingstationone.org/ you will have issues here - sign up on that site first if you haven't already.

= Maintenance =

== Maintenance Log ==
{| class="wikitable" border="1"
!Date
!Preformed by
!Service Type
!Notes
|-
|4/16/2017
|Ryan Pierce
|Created new AutoDesk Fusion 360 Post Processor. Modified Vectric Post Processors.
|Created new Fusion 360 Post Processor. It includes the changes listed below for the Vectric Post Processors. For Vectric, modified the Post Processors so that if the spindle does not spin up, it gives the user a Retry/Cancel dialog box instead of Abort/Retry/Ignore where Ignore is identical to Retry. Also, these Post Processors broke the Preview mode in the ShopBot software because the preview mode did the real spindle check and it failed because, of course, the spindle wasn't running. The new version will ignore the spindle check in preview mode.
|-
|11/8/2014
|Ryan Pierce
|Updated VCarve Post Processor
|Previously, installed new Post Processor to preset an Abort / Retry / Ignore dialog box when the spindle is started but doesn't spin up. Usual culprit is that a job is started when the the interlock is disabled, which results in the non-spinning bit crashing into the workpiece. Abort stops the job. Today, fixed Retry code. If you power on the VFD and the motor start is enabled, the VFD refuses to start. So I've re-programmed the Retry button to stop the VFD, wait 2 seconds, start the VFD, wait 2 more seconds, and check again to see if it is running. The Ignore button actually acts as Retry because we don't want someone clicking through this dialog box and damaging the machine. NOTE: The Aspire PC in the shop also has this Post Processor, but if you use Aspire, VCarve Pro, etc. on your personal computer, you will need the latest Post Processor to support this safety check.
|-
|11/8/2014
|Ryan Pierce
|Updated ShopBot software
|Did upgrade from 3.8.14 to 3.8.26. Installed latest firmware on ShopBot controller. (This was mandatory.) Two features of interest: Fixed occasional erractic behavior after repeated Stops and Resumes (and Nudges or Command Insertions). Reduced liklihood of Keypad lockup.
|-
|5/31/2015
|Ron Olson
|Created new VCarve Post Processors
|For drag/engraving bits, it's important that the spindle be turned '''off''' so as to not destroy the bit. Instead of manually modifying the sbp every time to remove the check that the spindle is turned on, I created a couple of new post processors (inches and mm, similar to Ryan's), that explicitly ''turn off'' the spindle. The user is given two opportunities to cancel the job if that is not what he/she wants.
|-
|}

== Outstanding Maintenance Issues ==

=== Lack of True E-Stop ===
As shipped, the ShopBot PRS does not support an Emergency Stop. This could be hacked, but it runs the risk of damaging the machine if engaged in a non-emergency situation. Suggested solution: Installing a 10A double pole 24V coil DIN mount relay, and powering the coil via the 24V supply through a normally closed E-Stop button. One pole will disconnect the 63V stepper motor current. One pole will break the control signal that enables the VFD and will cause the VFD to brake to a stop.

=== Automatic Dust Collection ===
The ShopBot has +5V TTL outputs that could be used to trigger automatic dust collection (when the spindle goes live) and/or a warning light (when the gantry is enabled to move.)

=== Limit Switch Issues ===
Every time you start the ShopBot, it resets itself so that the limit switches are disabled! You can turn them on (if memory serves) with the Values -> Input Switch Assignment menu item. Limit switches are really useful - but they need to be enabled. When they are, they will stop manual jogging when the limit is hit (although pressing the key again will let you continue moving the gantry) and they will also stop a running job (but give you the option of ignoring the limits.)

I found a couple more problems when testing all the limits. When I took the gantry to X maximum, the dust collector hose pulled off! I put it back on, but I'm not sure how stable this is. Also, when I originally set the Y maximum and minimum, I wanted as much spindle travel as possible. But it appears that if you're at the Y max and move in the X direction, you can hit the middle support with the dust collector boot. We've got several inches Y travel beyond the nominal 48", so we may want to look into reducing this to clear the supports.

== Resources ==
[[File:ShopBot PSOne Post Processors.zip]] - Post Processors for Vectric Aspire and VCarve Pro 8.0 which includes the change to check that the spindle actually started.

[[File:ShopBot_TC_PS1-NO-SPIN.zip]] - Post Processors for Vectric Aspire and VCarve Pro which include changes to explicitly *disable* spinning

[[File:ShopBot PSOne Fusion 360 Post Processor.zip]] - Post Processor for Autodesk Fusion 360 which includes the change to check that the spindle actually started.

[[Category:Fabrication]]
[[Category:CNC]]
[[Category:Future Things Bus Data Sources]]

Disposed of. Dead. Morte. Milwaukee 8945 Shop Vacuum

2017-08-07T20:55:13Z

Rbean:

{{Template:EquipmentPage
|owner = PS:One
|hostarea = General Area
|certification = no
|hackable = no
|model = 8945
|serial = 642A 19332
|arrived = 2017
|where = General Area
|doesitwork = yes
|contact = Ron Bean
|value = $400
|image = [[File:Milwaukee-8945-2.jpg]]
}}

Milwaukee 8945 vacuum head, with shop-built drum adapter. 
Other parts:

*Milwaukee-49-90-0275 16" Wire Frame Vacuum Filter Cage

*Milwaukee-49-90-0265 16" Cloth Vacuum Filter and Gasket

*Rockler 56647 2.5" x 10ft vacuum hose

*Rockler 31660 2.5" hose swivel

*Rockler 55083 Shop Vacuum Handle

*Oneida Dust Deputy Cyclone

The filter is re-usable, but do not wash in water (it will shrink). 

There are at least two versions of the filter and filter cage, be sure to use the part numbers above. Some vendors stock one version, some stock the other.

Rbean:

{{Template:EquipmentPage
|owner = PS:One
|hostarea = Wood Shop
|certification = yes
|hackable = no
|model = R181FB
|serial = 825100 0338
|arrived = DATE
|where = Wood Shop
|doesitwork = yes
|contact = ?
|value = ?
|image = [[File:R181FB.jpg]]
}}

2017-01-07T23:07:48Z

Rbean:

Ryobi R181FB Router

2017-01-07T23:07:23Z

Rbean: Created page with "{{Template:EquipmentPage |owner = PS:One |hostarea = Wood Shop |certification = yes |hackable = no |model = R181FB |serial = 825100 0338 |arrived = DATE |where = Wood Shop |do..."

Hitachi M12V Router

2017-01-07T23:04:28Z

Rbean: Created page with "{{Template:EquipmentPage |owner = PS:One |hostarea = Wood Shop |certification = yes |hackable = no |model = M12V |serial = M941275 |arrived = ? |where = Wood Shop |doesitwork..."

Routers and Router Tables

2017-01-07T22:57:06Z

Rbean:

We have several routers and router tables. This should link to all of them: 

[[Excalibur Router Table]] 
[[Ryobi RT101 Router Table]] 
[[Ryobi A25RT02 Router Table]] 

[[Ryobi R161 Router]] 

See also: [[CNC_Routers]]