{{ Template:EquipmentPage
| owner=PS:One
| model=Mini 24
| serial=SERIAL NUMBER
| arrived=6/29/2011
| doesitwork=yes
| contact=[[CNC|CNC Area Host]]
| where=Shock Shop
| certification=yes
| hackable=no
| value=$15,000
| image = Epilog_fired_the_laser.jpg
}}

== General Info ==

This machine: http://www.epiloglaser.com/mini24_overview.htm

Manual for this machine: http://www.epiloglaser.com/downloads/pdf/mini_helix_4.22.10.pdf

[[laser settings|Settings for various materials]]

[[Laser Cutter Instructions and Workflow]]

[[Laser cutter reservation system]]

Cleaning the optics: http://www.epiloglaser.com/tl_clean_optics.htm

Inkscape for newbies: http://blog.ponoko.com/2008/01/21/how-to-inkscape-for-ponoko-newbies-trace-an-image/

== Ventilation ==

The Previous Ventilation Systems broke after where and tear. After some research, it was insufficient for our needs anyway.

{| class="wikitable"
|+ Replacement parts for Air removal
! Item
! Price
! Reference
|-
| Standard Heavy Duty Blower
| $592.31
| http://www.mcmaster.com/#1953k23/=skexxp
|}

== '''NEVER CUT THESE MATERIALS''' ==

* '''PVC (Poly Vinyl Chloride):''' Also known as '''"vinyl"''' '''"pleather"''' or '''"artificial leather."''' Most adhesive vinyl shelf paper (e.g. Con-Tact Paper) also is PVC. Emits HCl and nasty chlorinated compounds when cut! Don't ever cut this material as it will ruin the optics, cause the metal of the machine to corrode, and ruin the motion control system.
* '''Polycarbonate:''' Also known as '''"Lexan."''' Polycarbonate is also often found as flat, sheet material. The case cover window on the laser cutter is made of Polycarbonate because polycarbonate strongly absorbs infrared radiation! This is the frequency of light the laser cutter uses to cut materials, so it is very ineffective at cutting polycarbonate. Polycarbonate can also emit flame and chlorine gas when cut, making it a poor choice for laser cutting.
* '''ABS:''' ABS does not cut well in a laser cutter. It tends to melt rather than vaporize, and has a higher chance of catching on fire and leaving behind melted gooey deposits on the vector cutting grid. It also does not engrave well (again, tends to melt). Finally, ABS emits cyanide when cut.
* '''HDPE:''' "milk bottle" plastic. It melts. It gets gooey. It catches on fire. Don't use it.
* '''PolyStyrene Foam:''' It catches fire, it melts, and only thin pieces cut. This is the #1 material that causes laser fires!!!
* '''Fiberglass:''' It's a mix of two materials that can't be cut. Glass (etch, no cut) and epoxy resin (fumes)
* '''Coated Carbon Fiber:''' Again, it's a mix of two materials. Thin carbon fiber mat can be cut, with some fraying. However, once coated with epoxy it will emit noxious fumes.
* Silhouette '''magnet paper''' (sold by Inventables by example): it likely contains chlorine. Emits HCl and nasty chlorinated compounds when cut! Don't ever cut this material as it will ruin the optics, cause the metal of the machine to corrode, and ruin the motion control system.
* '''PTFE:''', also known as '''Teflon''' or any fluorinated polymer it will releases nasty fluorinated compounds (bad for you) and sublimate then deposit on the lenses (likely destroying them).
* '''Gator foam''': foam core gets burned and eaten away compared to the top and bottom hard paper shell. Not a fantastic thing to cut, but it can be cut if watched. And the MSDS sheet says it may produce hydrogen bromide and hydrogen chloride known to degrade the optics and mechanic of the cutter
* Any other plastic with "Chlor" or "Fluor" in the name, for the same reasons as PVC and PTFE above.

== '''Test for material''' ==

Some people came up with an easy protocol to help identify unknown polymers: [http://www.nycresistor.com/2008/08/28/how-to-identify-polymers-with-burnination/ Nyc Resistor - how to identify polymers with burnination]. We don't know how reliable it is. And we can't but recommend to do that under good ventilation (outside?)

== Safe Materials ==
The laser can cut or etch. The materials that the laser can cut materials like wood, paper, cork, and some kinds of plastics. Etching can be done on almost anything, wood, cardboard, aluminum, stainless steel, plastic, marble, stone, tile, and glass.
* Cutting
** Many woods up to 1/4" thick. Composite woods like plywood contain glue, and may not laser cut as well as solid wood. Engineered woods like MDF are okay to use but may experience a higher amount of charring when cut. Be very careful about cutting oily woods, or very resinous woods as they also may catch fire.
** Paper cuts very very well on the laser cutter, and also very quickly. Thin paper and single layer card stock and cardboard are perfectly OK. Thicker cardboard, carton, and other papers also cut very well but need to be watched to make sure they don't catch fire.
** Cork cuts nicely, but the quality of the cut depends on the thickness and quality of the cork. Engineered cork has a lot of glue in it, and may not cut as well. Cork thicker than 1/4" should be avoided.
** Acrylic (also known as Lucite, Plexiglas, PMMA) cuts extremely well on the laser cutter, leaving a beautifully polished edge. With care, acrylic material up to 1/2" thick can be cut on the laser cutter.
** Delrin (POM) in thin sheets does cut. Delrin comes in a number of shore strengths (hardness) and the harder delrin tends to work better. Great for gears!
** Kapton tape (Polyimide) : Works well, in thin sheets and strips like tape. 1/16" thick is about as thick as you can cut reliably.
** Mylar : Works well if it's thin. Once you get too far past 1/16" thick mylar has a tendency to warp, bubble, and curl. Gold coated mylar will not work.
** Solid Styrene : Smokes a lot when cut, but can be cut. Keep it thin (1/16")
** Depron foam: Used a lot for hobby, RC aircraft, architectural models, and toys. 1/4" cuts nicely, with a smooth edge. Must be constantly monitored when cutting.
** Cloth (leather, suede, felt, hemp, cotton, polyester, but NEVER vinyl or pleather-- see above) They all cut well. Leather is very hard to cut, but can be if it's thinner than a belt (call it 1/8")
** Magnetic Sheet material cuts beautifully (make SURE it does NOT contain chlorine, see above)
** NON-CHLORINE containing rubber is fine for cutting.
** Carbon fiber mats/weave that has not yet had epoxy applied can be cut, very slowly. You must not cut carbon fiber that has been coated!!
* Etching: all the above can be etched, in some cases very deeply. In addition, you can etch:
** Glass (green seems to work best) .. looks sandblasted. Only FLAT GLASS can be engraved in our cutter. No round or cylindrical items.
** Ceramic tile
** Anodized aluminum ( vaporizes the anodization away )
** Painted/coated metals ( vaporizes the paint away )
** Stone : Marble, Granite, Soapstone, Onyx. Gets a white "textured" look when etched
* Marking
There expensive coating called 'cermark'. This marking compound costs $100 for a small bottle, and must be diluted with ethanol and applied to metal (not ceramics or stone) before being etched to leave behind a permanent dark black mark.

=== Material sources ===
* [http://www.inventables.com Inventables] for acrylic
* [http://www.abbeyspecialties.com/ Abbey Specialties] for acrylic in varied sizes, this company is our landlord. They are in the other half of our building and if you ask they can drop off in our shared loading dock.

== Air assist ==
Air assist is used for vector cutting to have nice traces and avoid your material to burn. However some people like to have it disabled for raster jobs. The best is to use the pressure regulator on the left of the machine to put it on/off. Don't forget to put it off when you've finished and you don't need it while doing your settings, that's just making our air compressor work too much.

If you hear a hiss behind the machine, it's that the valve is closed and that ''Air assist will not work'''… You have to stop the job and then:
* Hit '''config (2)'''
* Left key until "Air assist vector" put On with '''Up''' key (You shouldn't have to put Off here as you just have to put the compressor off if you really need that)
* Left key until "Air assist raster" put On with '''Up''' key.

You should not have to touch these settings, especially because it confuses the users and it can make them destroy their material or cause fire. Default settings should be On and On for both.

== General references ==

incredible box maker, with holes and text: http://www.makercase.com/

parametric pdf box creator: http://boxmaker.rahulbotics.com/

parametric svg box creator: http://www.giplt.nl/svg/
(load > construction category > better box)

Ladyada's info on the proper application of laser beams: http://www.ladyada.net/wiki/laserinfo/equipment

Information on materials that can and can't be cut: http://www.pololu.com/docs/0J24/3

paramateric living hinge generator: http://www.ashanan.com/hinges/
(code at: https://github.com/ashanan/hinges)

python svg library written by [[User:toba|Toba]]: https://github.com/eastein/svgcuts

parametric flexbox generator: http://flexbox.herokuapp.com/

http://blog.makezine.com/archive/2008/08/how-to-lasercut-custom-bo.html - Laser cut boxes 

[[:Image:psone-logo-cutout.svg|PS:One Logo]] 

== Long-ass list of laser designs on Thingiverse ==
[http://www.thingiverse.com/tool:33/things All laser cutter things on Thingiverse] 
http://www.thingiverse.com/thing:2321 - Theo Janssen 
http://www.thingiverse.com/thing:2073 - Drill gauge 
http://www.thingiverse.com/thing:247 - Hex connector toy 
http://www.thingiverse.com/thing:1960 - 2010 hex desktop calendar 
http://www.thingiverse.com/thing:2023 - clock 
http://www.thingiverse.com/thing:1739 - shoe hanger 
http://www.thingiverse.com/thing:1616 - geneva wheel 
http://www.thingiverse.com/thing:201 - Square gears 
http://www.thingiverse.com/thing:1521 - Gyroscope 
http://www.thingiverse.com/thing:1393 - End mill set holder 
http://www.thingiverse.com/thing:1203 - 608 bearing wrapper + face 
http://www.thingiverse.com/thing:952 - Small box 
http://www.thingiverse.com/thing:981 - cable chain 
http://www.thingiverse.com/thing:855 - Chess set 
http://www.thingiverse.com/thing:20 - Chess set 
http://www.thingiverse.com/thing:3353 - Chess board with compass rose inlay 
http://www.thingiverse.com/thing:587 - gEarrings 
http://www.thingiverse.com/thing:3411 - gearcuffs 
http://www.thingiverse.com/thing:807 - Mystery box 
http://www.thingiverse.com/thing:516 - tumbler, key, and case 
http://www.thingiverse.com/thing:409 - Resistor lead tool 
http://www.thingiverse.com/thing:211 - Planetary gear business card 
http://www.thingiverse.com/thing:53 - planetary gears 
http://www.thingiverse.com/thing:3021 - Scale mail 
http://www.thingiverse.com/thing:5265 - Peristaltic pump 
http://www.thingiverse.com/thing:5243 - laser cut tetris blocks 
http://www.thingiverse.com/thing:5076 - Wire spool holder 
http://www.thingiverse.com/thing:5727 - Settlers of Catan 
http://www.thingiverse.com/thing:5730 - Teardrop pendant light 
http://www.thingiverse.com/thing:7796 - Gear coasters 

== Software Compatability ==

Note: this indicates success in using this software with the printer driver, not general capabilities about the software itself.

{| border=1
|-
! Software type
! Manufacturer
! File extensions
! Raster (engraving)
! Vector (cutting)
! Other notes
|-
| CorelDraw
| [http://www.corel.com Corel]
| cbr
| yes
| yes
| not available on machine
|-
| Illustrator CC
| [http://www.adobe.com Adobe]
| ai, eps, svg, pdf
| yes
| yes
| available on machine
|-
| Photoshop CC
| [http://www.adobe.com Adobe]
| psd, eps, pdf
| yes
| yes
| available on machine
|-
| Inkscape
| Open Source
|
| yes
| yes
| save as PDF, then print from Acrobat. works for bitmap and vector.
|}

== Notes on Software Compatibility ==

Adobe Illustrator and the epilog drivers don't always work great together. If you're experiencing any of the following, there is a simple fix:

# Job runs, but it's an empty run. Laser head moves once then completes, even though raster vs vector is correctly configured and stokes are set to 0.072pt.
# Updating the media size in the epilog print driver does not update the size in Illustrator's print dialog, unless you reopen settings and press 'OK' in epilog again another time or two.
# Open pressing print in Illustrator, you get a message about "nothing to print in selected layers" or similar.
# Media size entered in epilog driver is read as the reverse by Illustrator (e.g. 24x12 is seen as 12x24 by Illustrator)

It seems epilog's driver doesn't play nicely with Illustrator, and Illustrator interfaces with the print driver a lot because it micromanages a lot of things.
If your document is saved as a .AI with PDF compatibility, simply right-click your AI file and open with Adobe Reader instead of Adobe Illustrator, and print from there.

Adobe Reader has a much more "dumbed down" print dialog that just works with Epilog's driver. You don't have to resave your .AI as .PDF, as Adobe Reader can read .AI files saved in compatibility mode (that's the default).

== Known issues ==

=== Can't login ===

==== The trust relationship between this workstation and the primary domain failed ====

* main page [[The trust relationship between this workstation and the primary domain failed]]
** Might be fixed now
** Occasional workaround: reboot

==== I was certified a long time ago ====

You need to
# Be a Current Member
# Have a https://members.pumpingstationone.org account
# Talk to a recommended certifier, The area host, or email info@pumpingstationone.org

You may be asked to get recertified.

== List of Currently Certified Users ==

This list is hugely incomplete because nobody was doing it. Someone should fix that eventually... for now, new certs should go in here. If you are certified and remember who certified you, go ahead and add yourself. Your non-presence on this list is not intended to insult you or your relatives.

{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Username on Laser Computer
|-
|Nat Zorach
|Will McShane
|lequis
|-
|Anthony Sontag
|Elizabeth
|anthony
|-
|Will McShane
|Danger Committee
|Will McShane
|-
|Eric Stein
|Will McShane
|Eric Stein
|-
|Patrick Schless
|Will McShane
|Patrick Schless
|-
|Laurie Rich
|Steve
|Laurie Rich
|-
|Tom Forajter
|Will McShane
|Forajter
|-
|Colin Parsons
|Patrick Swayze (RIP)
|colin
|-
|Andrew Camardella
|Colin Parsons
|rtystgeeke
|-
|Dan Locks
|Colin Parsons
|dwlocks
|-
|Mahmoud Al-Qudsi
|Colin Parsons
|mqudsi
|-
|Lauren Conroy
|Colin Parsons
|lconroy
|-
|Jesse Seay
|Colin Parsons
|jesseseay
|-
|Sai Yamanoor
|Colin Parsons
|sai
|-
|Hef
|Colin Parsons
|hef
|-
|Adam Talsma
|Colin Parsons
|atalsma
|-
|Josh Cooper
|Colin Parsons
|thisjosh
|-
|Bryan Rosendale
|Colin Parsons
|bryan
|-
|Kevin Caughlin
|Colin Parsons
|kevin
|-
|Nathan Becka
|Colin Parsons
|nathan
|-
|Stephen Kamykowski
|Colin Parsons
|stephen
|-
|Jesse Seay
|Colin Parsons
|jesseseay
|-
|Bart Dring
|Colin Parsons
|bdring
|-
|Mike Morarity
|Colin Parsons
|morarimj
|-
|Tony Dipaolo
|Colin Parsons
|td3710
|-
|Adrew An
|Colin Parsons
|hyun5942
|-
|Dean Anderson
|Colin Parsons
|dba5950
|-
|Francesca Slade
|Colin Parsons
|theslade
|-
|David Fell
|Colin Parsons
|DavidFell
|-
|[[User:Jaypee|Jay Pee]]
|Elizabeth
|Jaypee
|-
|Peter Borah
|Elizabeth
|peterbb
|-
|April
|Elizabeth
|april
|-
|[[User:rdoeksen|Ray Doeksen]]
|Elizabeth
|Ray Doeksen
|-
|Jason Shanfield
|Will McShane
|jason
|-
|Elizabeth Koprucki
|Will McShane
|ekoprucki
|-
|George Shaw
|Will McShane
|ps1george
|-
|Andrew Kos
|Elizabeth Koprucki
|kand
|-
|Derek Bever
|Elizabeth Koprucki
|dbever
|-
|Jason Araujo
|Derek Bever
|lobo
|-
|Adam Glick
|Ray Doeksen
|-
|Nathan Ellis
|Jason Shanfield
|-
|[[user:rob|Rob Riggs (Colorado Rob)]]
|Elizabeth
|rob
|-
|[[User:ad9581|Arturo Duarte]]
|Elizabeth Koprucki
|ad9581
|-
|[[User:jivnyahoo|James Porter]]
|Elizabeth Koprucki
|jivnyahoo
|-
|[[User:ryankelly11|Ryan Kelly]]
|Elizabeth Koprucki
|ryankelly11
|-
|[[User:sloanieb01|Sloan Lavery]]
|William McShane
|Sloanieb01
|-
|Casey Olson
|Jason Shanfield
|colson
|-
|Spenser Gilliland
|Elizabeth Koprucki
|spenser
|-
|Jeff McBride
|Elizabeth Koprucki
|lgaboarder
|-
|Joseph Prosnitz
|Colin Parsons
|binaryproof
|-
|David Morton
|Elizabeth Koprucki
|mediumcool
|-
|Thomas Wright
|Elizabeth Koprucki
|fluxx66
|-
|Touly Phiachantharath
|Elizabeth Koprucki
|toolz
|-
|Robert Grossman
|Elizabeth Koprucki
|rgrossman7
|-
|Eddie Muela
|Elizabeth Koprucki
|emuela
|-
|Rachel Wallis
|Elizabeth Koprucki
|rachelw
|-
|Nick Halderman
|Elizabeth Koprucki
|emertonom
|-
|Eric Beauchamp
|Jason Shanfield
|ericbeau
|-
|Aaron Mintz
|Elizabeth Koprucki
|
|-
|Matt Makris
|Elizabeth Koprucki
|mlm
|-
|Roger Moore
|Elizabeth Koprucki
|RogerMoore
|-
|}

== Certifying users ==

The laser cutter now has recommended certifiers. A recommended certifier can follow the instructions on [[Laser Engraver Certification]] to enable logins to the laser engraver computer.

[[Category:Laser Cutter]]
[[Category:Electronics Equipment]]
[[Category:CNC]]
[[Category:Fabrication]]
[[Category:Certification Clarification Needed]]

Vinyl Cutter

2014-10-06T00:25:25Z

RogerMoore: /* Certified Users */

{{Template:EquipmentPage
|owner=PS:One
|model=Jaguar II |serial=
|arrived=2012
|doesitwork=yes
|contact=Donald Jacobson
|where=Upstairs
|certification=yes
|hackable=no
|value=$300
|image= Vinylcutter.jpg
}}

== Tips on how to use (After Certified) ==

[http://c233963.r63.cf1.rackcdn.com/JaguarII_UserGuide.pdf User Guide PDF]

Loading the Media.

* Raise the lever on the upper back right of the machine
* Slide in the media. It helps to have a rectangular piece so the machine can recognize the size. Center it over some of the grooved rollers so they are as close to the edges as possible.
* Slide the pinch rollers from behind over the grooved roller you chose.
* Lower roller with the lever.
* Read the display and push the arrow button for the type of media you are loading. For a single sheet (not a roll), for example you would press the right arrow (see screen shot below)

== Importing ==

The Software used is CoCut Professional 2014. We not longer use the software that came with the cutter.

The software does not import svgs, but does import Adobe Illustrator files. Open your SVG in Illustrator and resave it as an .ai file. Then import your file into CoCut Pro.

== Cutting ==

When your graphic is ready to cut, click the File...Cut/Plot menus. This should bring up a couple of new windows. One is the Production Manager. This may show some older, incomplete jobs from failed attempts. Delete those old jobs.

The other window shows your setup. Note the orientation of your job. You may want to rotate it to fit the orientation of your vinyl in the plotter. Use the turned stick man button at the bottom to do this.

Make sure you set the size of your vinyl.

== Purchasing Materials ==

New Materials can be purchased locally through [http://www.raycosignsupply.com/vinyl-material Rayco] near Peterson and Pulaski, the plotter size is 24 inches.
* Economy/Intermediary stock is for the majority of projects and has an expected life of 3 years
* High performance stock is intended for cars and boats and has an expected life of 7 years.

== Certified Users ==

{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Donald Jacobson
|Donald Jacobson
|-
|-
|Bart dring
|Donald Jacobson
|-
|Ray Doeksen
|Elizabeth Koprucki
|-
|[[User:davidfell|David Fell]]
|Elizabeth Koprucki
|-
|[[User:dbever|Derek Bever]]
|Elizabeth Koprucki
|-
|[[User:RogerMoore|Roger Moore]]
|Elizabeth Koprucki
|-
|[[User:tom4writer|Tom Forajter]]
|Elizabeth Koprucki
|-
|[[User:ad9581|Arturo Duarte]]
|Elizabeth Koprucki
|-
|[[User:funk|Tyler Natoli]]
|Elizabeth Koprucki
|-
|Sloan Lavery
|Elizabeth Koprucki
|-
|Tyler Hsu
|Elizabeth Koprucki
|-
|Casey Olson
|Justin and Derek!
|-
|[[User:lgaboarder|Jeff McBride]]
|Elizabeth Koprucki
|-
|[[User:Sparr|Clarence Risher]]
|Elizabeth Koprucki
|-
|[[User:ironwill|Will Garza]]
|Elizabeth Koprucki
|-
|[[User:emertonom|Nick Halderman]]
|Elizabeth Koprucki
|-
|[[User:aaronmintz|Aaron Mintz]]
|Elizabeth Koprucki
|-
|Matt Makris
|Elizabeth Koprucki
|-
|Matt Meshulam
|Elizabeth Koprucki
|-
|[[User:amishhammer|Tom Judge]]
|Elizabeth Koprucki
|-
}
[[Category:Shop Equipment]]

Lulzbot Taz3

2014-09-26T02:35:37Z

RogerMoore:

{{Template:EquipmentPage
|owner = PS:One
|certification = yes
|hackable = no
|model = Aleph Objects Taz3
|serial = KT-PR0013-5509
|arrived = January 2014
|doesitwork = yes
|contact = Elizabeth
|where = [[CNC]] 2nd Floor
|value = $2395
|image = Taz3.jpg
}}

== Operation ==
'''Do not leave the printer unattended while printing'''
Also, don't forget to turn the printer off when you are no longer using it.

=== Windows Drivers ===
Windows users will need to [https://www.lulzbot.com/support/TAZ install drivers.]

=== Usable Print Area ===
298mm x 275mm x 250mm (11.7in x 10.8in x 9.8in)

=== Host Software ===
Users of Linux, Windows, OSX will need to install the following software:
* [https://github.com/kliment/Printrun#getting-printrun Pronterface] - or [http://www.repetier.com/download/ Repeteir-Host] for manual operation of the printer as well as for starting print jobs
* [http://slic3r.org/download Slic3r] - for creating gcode (print jobs) from 3D models
* Additionally, Lulzbot provides a [http://devel.lulzbot.com/TAZ/2.1/software/2013Q4/slic3r/config/pt35mm-nozzle/medium_ABS_no-support_pt35nzl_pt2-layer-height_config.ini slic3r config file] for the Taz3

== Suggested Settings ==

Both of these files have appropriate settings for the 'printer settings' and 'filament settings' tabs. To use them, go to File > Load Config in Slic3r and select the downloaded file. You must then go to each tab and hit the 'save' icon next to the settings selection dropdown box, or else Slic3r will forget the settings when you close it.

==== Print Settings Without Support - Fast ====

[[File: Taz3_print_settings_NO_SUPPORT.ini]]

This file is for the 'print settings' tab of Slic3r. This is a 'fast' profile, geared towards finishing prints relatively quickly. It still provides excellent surface quality. This profile does not include support, so for large overhangs you'll need the next configuration file.

==== Print Settings With Support - Fast ====

[[File: Taz3_print_settings_SUPPORT.ini]]

This file is for 'print settings' tab of Slic3r. This is a 'fast' profile, geared towards finishing prints relatively quickly. It still provides excellent surface quality. This profile includes support, appropriate for large overhangs.

== Other Resources ==
[http://download.lulzbot.com/TAZ/3.0/documentation/2013Q4/LulzBot_TAZ_3.0-User_Manual-ebook.pdf The manual is available online]. A printed form of it can be found near the printer. The manual explains how to operate the printer.

=== Filament ===
[https://www.inventables.com/categories/materials/3d-printer-filament Inventables]

[http://www.monoprice.com/Search/Index?keyword=3d+printer+filament Monoprice]

=== Find Something to Print ===

[http://thingiverse.com Thingiverse] is a great place to find printable 3D models that other people have designed, and to publish your own.

=== Designing 3D Models ===

Page in progress to describe [https://wiki.pumpingstationone.org/3D_Modeling 3D modeling.]

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! qualified member
! trained by
|-
|[[User:Dbever|Derek Bever]]
|Hours of shouting at 3D printers
|-
|Elizabeth Koprucki
|Derek Bever
|-
|Andrew Kos
|Elizabeth Koprucki
|-
|[[User:rdoeksen|Ray Doeksen]]
|Elizabeth Koprucki
|-
|[[User:Negativek|Everett Wilson]]
|Derek Bever
|-
|[[User:daveplays|David Earley]]
|Derek Bever
|-
|[[User:Lyn|Lyn Cole]]
|Derek Bever
|-
|[[User:nerobro|Greg Teiber]]
|Derek Bever
|-
|[[User:nick|Nick Castillo]]
|Derek Bever
|-
|[[User:tom4writer|Tom Forajter]]
|Elizabeth Koprucki
|-
|[[User:dditzler|David Ditzler]]
|Elizabeth Koprucki
|-
|[[User:davidfell|David Fell]]
|Elizabeth Koprucki
|-
|[[user:rob|Rob Riggs (Colorado Rob)]]
|Elizabeth
|-
|Mark Stevens
|Elizabeth Koprucki
|-
|[[User:ad9581|Arturo Duarte]]
|Elizabeth Koprucki
|-
|[[User:justin|Justin T. Conroy]]
|Derek Bever
|-
|[[User:jivnyahoo|James Porter]]
|Elizabeth Koprucki
|-
|[[User:ryankelly11|Ryan Kelly]]
|Elizabeth Koprucki
|-
|[[User:JanetD|Janet Dornhoff]]
|Elizabeth Koprucki
|-
|Genevieve Aphrodite
|Justin Conroy
|-
|Sloan Lavery
|Elizabeth Koprucki
|-
|[[User:spacekid|Adam Glick]]
|Ray Doeksen
|-
|[[User:funk|Tyler Natoli]]
|Elizabeth Koprucki
|-
|Chris Marchwick
|Elizabeth Koprucki
|-
|[[User:marty|Marty Dubin]]
|Elizabeth Koprucki
|-
|[[User:amishhammer|Tom Judge]]
|Justin Conroy
|-}
|-
|[[User:brian|Brian Dunn]]
|Derek Bever
|-|-
|[[User:lofgren|Tim Lofgren]]
|Derek Bever
|-
|[[User:lgaboarder|Jeff McBride]]
|Elizabeth Koprucki
|-
|Thomas Wright
|Justin Conroy
|-
|[[User:dsiegfried|David Siegfried]]
|Derek Bever
|-
|Donald Jacobson
|Elizabeth Koprucki
|-
|[[User:Sparr|Clarence Risher]]
|Elizabeth Koprucki
|-
|[[User:ironwill|Will Garza]]
|Elizabeth Koprucki
|-
|[[User:emertonom|Nick Halderman]]
|Elizabeth Koprucki
|-
|[[User:tactics|Michael Maloney]]
|Elizabeth Koprucki
|-
|[[User:tactics|Brennan Koziarz]]
|Elizabeth Koprucki
|-
|[[User:rogermoore|Roger Moore]]
|Elizabeth Koprucki
|-}
[[Category:Fabrication]]
[[Category:CNC]]