PS:1 Wiki Dev - User contributions [en]

Epson SureColor F170

2025-01-07T14:09:03Z

Thatnaysayer: Changed authorization needed to no

{{Template:EquipmentPage
| owner=PS:One
| model=Epson SureColor F170
| serial=X9FD056957
| arrived= 11/24/2022
| where=Arts
| certification=no
| contact=2d Area Host
| hackable=no
| value=$500
| image =
| hostarea = 2D Printing
| doesitwork=yes
}}

== Status ==
In the process of being set up.

== Description ==
Dye sublimation printer for use with t-shit press, mug press, other dye sublimation transfer methods.

'''Features'''
Usable for dye sublimation image transfers.

'''Manufacturer description:'''

Get fast, reliable dye-sub printing right out of the box with the SureColor F170. Ideal for personalizing awards, mugs, mousepads and more, this high-performance dye-sublimation printer delivers professional-quality prints using powerful PrecisionCore® technology. A truly turnkey solution, the SureColor F170 arrives with genuine Epson dye-sublimation ink technology, a 150-sheet auto-feed tray, and Mac and Windows print software. Plus, with its remarkably compact, space-saving design, you can maximize workshop space.

https://epson.com/For-Work/Printers/Large-Format/SureColor-F170-Dye-Sublimation-Printer/p/C11CJ80201

Mimaki CJV30-160

2024-09-11T22:25:15Z

Thatnaysayer: /* Authorization */

{{ Template:EquipmentPage
| owner=PS:One
| model=Mimaki CJV30-130
| serial=SERIAL NUMBER
| arrived= 14/01/23
| where=Arts
| certification=yes
| contact=Arts Area Host
| hackable=no
| value=$10000
| image = Cjv30.jpg
| hostarea = 2D Printing
| doesitwork=yes
}}

==Status==
'''Cutting Offline Until Re-Calibration'''

== Description ==
A large format printer with integrated plotter and cutter that uses SS21 eco-solvent inks. This thing does it all, from printing on a seemingly endless number of media to plotting (both cutter and pen).
 
All the way from bog-standard paper to fancy wallpaper, to car-wraps - there is very little this monster cannot print on.

==Reminders==
* If you change the pinch roller thickness to high, change it back.
* NEVER tape media to itself. Always use a piece of paper wrapped around the media and tape the paper to itself.
==Features==
So many
===Printing===
Media is up to 63.7" (1,620 mm) wide.

The CJV30-160 is capable of printing up to 1440x1440dpi depending on the media profile. Our house media profiles have these resolutions:
* Photo papers - 1440x1440
* Canvas - 540x720
* Vinyl is at 720x720.

Note, not every profile has every option available to change.

==Cutting==

The CJV30-160 is also capable of performing print and cut operations. Ideal for small runs of stickers or labels. These need to be set up in Illustrator (or another vector image editor of your choice) before being loaded into Rasterlink as a PDF.

If you are not using Illustrator you will need to create two spot colors in your image editor as follows:

Name: CutContour
Cyan: 0%
Yellow: 100%
Magenta: 100%
Black: 0%

Name: CutContour1
Cyan: 0%
Yellow: 100%
Magenta: 100%
Black: 0%

If you are using illustrator you can download the swatches [https://drive.google.com/file/d/168T-Mo3AiJazYn2gDhse03KE1HX0kVcz/view?usp=share_link here]. Cuts need to have a stroke width of 0.01 or they will not register properly in the software.

===Plotting===
pen and otherwise

==Community ICC Profiles==
Here you can find links to backups of the the ICC Profiles for a variety of media provided by the PS1 community. These should be already loaded into RasterLink6.

===House Media===
Kodak Satin 
Kodak Gloss 
Lexjet Vinyl 
Canvas 

===Misc. Media===
Avatrex 3500 Solvent Inkjet Clear Film
https://www.lexjet.com/avatrex-3500-matte-for-solvent-uv-curable-and-latex-inks-50in-x-100ft#read-more

==Checklist==

* Load media
* poke in number of rolers
* hit Remote button to set remote
* Setup job on computer
* do it.

==Manuals and Such==
''Note, changing many of these settings could constitute hacking the device as they can lead to the device breaking - please contact the 2D Area host if you have any questions. Those authorized are allowed to make changes to the necessary settings to print on their media''
 
 
[https://drive.google.com/file/d/1lFv1JgltWLuSSRTDlsQIwxsv1p28HKW3/view?usp=share_link Operations Manual]
 
[https://drive.google.com/file/d/1HQ80K27nS2SIk4BF2G0raFF4nD2r5D-8/view?usp=share_link Maintenance Manual]

[https://canvas.pumpingstationone.org/courses/91/modules The Canvas Course] is very thorough in explaining how things work. It is recommended to use it as a reference.

==Authorization==
[https://canvas.pumpingstationone.org/courses/91 Complete the Canvas Course]. Authorization details pinned to the #2d-printing Slack channel.

Mimaki CJV30-160

2024-03-20T22:41:27Z

Thatnaysayer: /* Authorization */

Mimaki CJV30-160

2024-03-20T22:40:10Z

Thatnaysayer: /* Status */

Brother PRS100 Embroidery Machine

2023-12-12T23:04:41Z

Thatnaysayer:

{{ Template:EquipmentPage
| owner=PS:One
| model=Brother PRS100
| serial=SERIAL NUMBER
| arrived= 07/02/23
| where=Arts
| certification=yes
| contact=Arts Area Host
| hackable=no
| value=$5000
| [[File:https://www.echidnasewing.com.au/assets/full/PRS100.jpg]]
| hostarea = 2D Printing
| doesitwork=yes
}}

==Status==

Adler Patcher

2023-12-12T22:51:43Z

Thatnaysayer:

{{ Template:EquipmentPage
| owner=PS:One
| model=Adler
| serial=SERIAL NUMBER
| arrived= 07/02/23
| where=Arts
| certification=yes
| contact=Arts Area Host
| hackable=no
| value=Unknown
| image =
| hostarea = Arts Area
| doesitwork=yes
}}

==Status==

Adler Patcher

2023-12-12T22:46:10Z

Thatnaysayer: Created page with "{{ Template:EquipmentPage | owner=PS:One | model=Adler | serial=SERIAL NUMBER | arrived= 07/02/23 | where=Arts | certification=yes | contact=Arts Area Host | hackable=no | v..."

Brother PRS100 Embroidery Machine

2023-12-12T22:35:55Z

Thatnaysayer: Created page with "{{ Template:EquipmentPage | owner=PS:One | model=Brother PRS100 | serial=SERIAL NUMBER | arrived= 07/02/23 | where=Arts | certification=yes | contact=Arts Area Host | hackab..."

{{ Template:EquipmentPage
| owner=PS:One
| model=Brother PRS100
| serial=SERIAL NUMBER
| arrived= 07/02/23
| where=Arts
| certification=yes
| contact=Arts Area Host
| hackable=no
| value=$5000
| image = Cjv30.jpg
| hostarea = 2D Printing
| doesitwork=yes
}}

==Status==

Mimaki CJV30-160

2023-02-21T01:25:34Z

Thatnaysayer: /* Status */

Mimaki CJV30-160

2023-02-21T01:24:18Z

Thatnaysayer: /* House Media */

Mimaki CJV30-160

2023-02-21T01:24:02Z

Thatnaysayer:

Mimaki CJV30-160

2023-02-21T01:23:19Z

Thatnaysayer: /* =Misc. Media */

Mimaki CJV30-160

2023-02-21T01:23:11Z

Thatnaysayer:

Mimaki CJV30-160

2023-01-20T06:14:49Z

Thatnaysayer: /* Description */

Mimaki CJV30-160

2023-01-20T06:14:09Z

Thatnaysayer: /* Status */

Mimaki CJV30-160

2023-01-20T06:13:52Z

Thatnaysayer: /* Status */

Mimaki CJV30-160

2023-01-20T06:13:23Z

Thatnaysayer: /* Status */

Mimaki CJV30-160

2023-01-20T06:13:08Z

Thatnaysayer: /* Status */

Mimaki CJV30-160

2023-01-20T06:08:05Z

Thatnaysayer:

File:Cjv30.jpg

2023-01-20T06:07:27Z

Thatnaysayer:

Mimaki CJV30-160

2023-01-20T06:06:10Z

Thatnaysayer:

{{ Template:EquipmentPage
| owner=PS:One
| model=Mimaki CJV30-130
| serial=SERIAL NUMBER
| arrived= 14/01/23
| where=Arts
| certification=yes
| contact=Arts Area Host
| hackable=no
| value=$10000
| image = https://d2w577gk9zpoty.cloudfront.net/archives/002/201504/7c09a70a68f20704c03b6215a6c34552.jpg
| hostarea = 2D Printing
| doesitwork=yes
}}

==Status==
Canvas course being developed

== Description ==
A integrated plotter and cutter that uses SS21 eco-solvent inks. This thing does it all, from printing on a seemingly endless number of media to plotting (both cutter and pen). All the way from bog-standard paper to fancy wallpaper, to car-wraps - there is very little this monster cannot print on.

==Features==
So many
===Printing===
Printing
===Plotting===
pen and otherwise

==Manuals and Such==
''Note, changing many of these settings could constitute hacking the device as they can lead to the device breaking - please contact the 2D Area host if you have any questions. Those authorized are allowed to make changes to the necessary settings to print on their media''
 
 
[https://drive.google.com/file/d/1lFv1JgltWLuSSRTDlsQIwxsv1p28HKW3/view?usp=share_link Operations Manual]
 
[https://drive.google.com/file/d/1HQ80K27nS2SIk4BF2G0raFF4nD2r5D-8/view?usp=share_link Maintenance Manual]

Mimaki CJV30-160

2023-01-20T06:03:51Z

Thatnaysayer: /* Features */

Mimaki CJV30-160

2023-01-20T06:01:35Z

Thatnaysayer: /* Manuals and Such */

Mimaki CJV30-160

2023-01-20T05:59:58Z

Thatnaysayer: /* Description */

Mimaki CJV30-160

2023-01-20T03:14:19Z

Thatnaysayer:

Mimaki CJV30-160

2023-01-20T03:13:55Z

Thatnaysayer: Created page with "{{ Template:EquipmentPage | owner=PS:One | model=Mimaki CJV30-130 | serial=SERIAL NUMBER | arrived= 14/01/23 | where=Arts | certification=yes | contact=Arts Area Host | hack..."

Epson SureColor F170

2022-11-26T19:00:48Z

Thatnaysayer: Created page with "{{ Template:EquipmentPage | owner=PS:One | model=Epson SureColor F170 | serial=X9FD056957 | arrived= 11/24/2022 | where=Arts | certification=yes | contact=2d Area Host | hack..."

{{ Template:EquipmentPage
| owner=PS:One
| model=Epson SureColor F170
| serial=X9FD056957
| arrived= 11/24/2022
| where=Arts
| certification=yes
| contact=2d Area Host
| hackable=no
| value=$500
| image =
| hostarea = 2D Printing
| doesitwork=yes
}}

== Status ==
In the process of being set up.

== Description ==
Dye sublimation printer for use with t-shit press, mug press, other dye sublimation transfer methods.

'''Features'''
Usable for dye sublimation image transfers.

'''Manufacturer description:'''

Get fast, reliable dye-sub printing right out of the box with the SureColor F170. Ideal for personalizing awards, mugs, mousepads and more, this high-performance dye-sublimation printer delivers professional-quality prints using powerful PrecisionCore® technology. A truly turnkey solution, the SureColor F170 arrives with genuine Epson dye-sublimation ink technology, a 150-sheet auto-feed tray, and Mac and Windows print software. Plus, with its remarkably compact, space-saving design, you can maximize workshop space.

https://epson.com/For-Work/Printers/Large-Format/SureColor-F170-Dye-Sublimation-Printer/p/C11CJ80201

Vote To Replace Large Format Printer

2022-11-11T15:32:25Z

Thatnaysayer:

[[Category:Votes]]
[[Category:2022 Votes]]

== Title==
Vote To Replace Large Format Printer

== Sponsor ==
Davis Sayer (2D Area Host)

== Co-Sponsors ==
* Lydia Miller
* Ben Teifeld

== Vote Results ==
Quorum:[ ]
Yea Votes: [ ]
Nay Votes: [ ]
Present or Abstain: [ ]

== Definition of "Language" ==
"The wording of a legal document." [tfd.com/language]

== Schedule ==
==== Proposal Date ====
Date this proposal was posted to the membership and a request for a vote date was sent to the Board.

11/02/22

==== Member Input ====
Does the Sponsor choose to open the language of the vote for changes due to member input? (optional and can be modified at any time)

'''[ ] YES [X] NO'''

==== Vote Announcement and Beginning Date of the Discussion Period ====
The announcement date of the vote proposal is the beginning date of the seven-day (minimum) posting and Member discussion period. (Certain exceptional vote types have longer discussion periods. Check the Bylaws if you are unsure.)'' If the Sponsor has chosen to include member input, suggested edits can be made in a shared document or other collaborative vehicle until the language is locked. The sponsor can stop taking suggestions at any time. ''

11/03/22

==== Language Lock Date and Start of Voting ====
Five days prior to the Day of the Vote, the vote language is locked, all edits are frozen, and the language of the vote is converted to a pdf file. Ballots that include the pdf are sent to the Membership, and electronic voting begins. '' Note that the minimum discussion period of seven days leaves only two days for changes before the lock takes place. ''

11/10/22

==== Day of the Vote ====

Date the Board has assigned for the vote. The Day of the Vote is the day the vote closes.

11/15/22

== Background ==
This is a proposal to authorize the PS:1 Board of Directors to spend up to $6000 on the purchase of a large format printer to replace the defunct Epson Stylus Pro 9800.

The 2d area host will decide which printer to purchase based on maintaining the current level of quality and expanding on usability.

== Language of the Vote ==
We authorize the board of directors or a representative of the board to spend up to $6000 on the purchase of a large format printer and related supplies.

Vinyl Cutter

2022-11-06T19:08:07Z

Thatnaysayer: /* Status */

{{Template:EquipmentPage
|owner=PS:One
|model=Jaguar II |serial=
|arrived=2012
|doesitwork=yes
|contact=2Dprinting at pumpingstationone.org
|where=Arts
|certification=yes
|hackable=no
|value=$2300
|image= Vinylcutter.jpg
|hostarea = 2D Printing
}}

== Status ==
2022-11-06: User permission error keeping printer from working.

2018-11-03: Perfect working condition. Cut 60 square feet today.

== Authorization ==

[[Viral Authorizations|Viral]]. Any authorized user can train and authorize another. Record authorizations on this wiki page, below. At the moment there are no regularly scheduled authorization sessions. Contact/ask an authorized user or the area host.

== Tips on how to use (After Authorized) ==
Quick Start Guide:
[https://drive.google.com/file/d/1Cwop09kOEgQb17iReb2KdIIuPSZlFPF-/view?usp=sharing]

The full manual can be found here:
[https://www.manualslib.com/download/1058726/Gcc-Technologies-Jaguar-Ii-Series.html]

See a [https://www.youtube.com/watch?v=HjMWrVCrecA&t=520s Useful Video].

== Loading Media ==

* Raise the lever on the upper back right of the machine
* Slide in the media (up to 24" or 600mm). It helps to have a rectangular piece so the machine can recognize the size. Center it over some of the grooved rollers so they are as close to the edges as possible.
* Slide the pinch rollers from behind over the grooved roller you chose.
* Lower roller with the lever.
* Read the display and push the arrow button for the type of media you are loading. For a single sheet (not a roll), for example you would press the right arrow (see screen shot below)

Note: It determines the width of the media by the placement of the two outer rollers:[[File:Vinyl Cutter Roller Media Width Sensor.jpeg|thumb|right|100px|Width Sensor]]

== Importing ==

The Software used is CoCut Standard 2015. We no longer use the software that came with the cutter.

The software does import svg or ai files. One thing to be careful with svg is to set your document settings to 96 DPI. This way exporting from your editing software then importing to CoCut Pro will maintain actual physical size.

Notes:

* Make sure to check any files you download from the internet for hidden artifacts
* Make sure all your borders/strokes are set to 0px or you will get 3 cuts for the border (inner stroke, outer stroke and object edge)

== Cutting ==

When your graphic is ready to cut, click the File -> Output menu. This will bring up the "Output to device" window.

Things you need to set on this window:
* Make sure "Settings via comm" is turned on via machine settings.TODO: Need to lookup the actual setting name.
* Pressure: Good starting point is 30g or 1oz. Standard glossy vinyl cuts well at 60g.
* Speed: Good starting point is 10cm/s or 4in/s
* Material Width: Click "Read Material" button. See [[Loading Media]]
* Material Length: Click "Read Material" button. See [[Loading Media]]
* Overcut: Good starting point is 0.25mm or 0.01in

Do Preview your cut because depending on your setting the cut layout is not necessary exactly what you laid out in the svg file. Note also that in the preview you can rearrange the layout, including duplicating, rotating, or removing cuts.

If you're having trouble accepting your media, sunlight from the window may be affecting the sensors. Roll the vinyl cutter away from the direct sunlight.

Note:

The output settings for speed and pressure can be set on the machine itself.
* Turn off "Settings via comm" TODO: Need to lookup the actual setting name.
* Take the cutter offline (hit on/off line button)
* Hit the speed or pressure button
* Use arrow keys to change value
* Hit enter
* Put the cutter online by hitting the on/off line button a second time

=== Blades ===

There are 3 types of blade for the cutter:

* Black Cap - Fine detail cutting - http://www.signtechnologies.net/catalogue/341/8/cutters-and-plotters/P-gcc-jaguar-ii-cutting-plotter
* Green Cap - Sandblasted/reflective materials - http://www.signtechnologies.net/catalogue/84/8/cutters-and-plotters/blades/P-gcc-blade-green-cap-for-sandblastreflective-material
* Red Cap - Standard Vinyl - http://www.signtechnologies.net/catalogue/83/8/cutters-and-plotters/blades/P-gcc-blade-red-cap-for-standard-vinyl

These blades will be arriving shortly.

== Purchasing Materials ==

New Materials can be purchased locally through [http://www.raycosignsupply.com/vinyl-material Rayco] near Peterson and Pulaski, the plotter size is 24 inches. Generally you are on your own for materials; if you use the materials that are near the cutter, it is fair game, and it would be cool if you put some money in the nearby gray donation box or ask the area host how to contribute. Area hosts use donations to buy more materials and parts for machines. Suggested donation $1/square foot?
* Economy/Intermediary stock is for the majority of projects and has an expected life of 3 years
* High performance stock is intended for cars and boats and has an expected life of 7 years.

* Transfer tape: http://www.ebay.com/itm/6-APPLICATION-TRANSFER-Paper-TAPE-300-ft-roll-for-Vinyl-Cutter-PLOTTER-FRESH-/351496781486?hash=item51d6d73eae

== Recommended Authorizers ==

* Kevin Bradley
* Elizabeth Koprucki

== Authorized Users ==

{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Donald Jacobson
|Donald Jacobson
|-
|-
|Bart dring
|Donald Jacobson
|-
|Ray Doeksen
|Elizabeth Koprucki
|-
|[[User:davidfell|David Fell]]
|Elizabeth Koprucki
|-
|[[User:dbever|Derek Bever]]
|Elizabeth Koprucki
|-
|[[User:RogerMoore|Roger Moore]]
|Elizabeth Koprucki
|-
|[[User:tom4writer|Tom Forajter]]
|Elizabeth Koprucki
|-
|[[User:ad9581|Arturo Duarte]]
|Elizabeth Koprucki
|-
|[[User:funk|Tyler Natoli]]
|Elizabeth Koprucki
|-
|Sloan Lavery
|Elizabeth Koprucki
|-
|Tyler Hsu
|Elizabeth Koprucki
|-
|Casey Olson
|Justin and Derek!
|-
|[[User:lgaboarder|Jeff McBride]]
|Elizabeth Koprucki
|-
|[[User:Sparr|Clarence Risher]]
|Elizabeth Koprucki
|-
|[[User:ironwill|Will Garza]]
|Elizabeth Koprucki
|-
|[[User:emertonom|Nick Halderman]]
|Elizabeth Koprucki
|-
|[[User:aaronmintz|Aaron Mintz]]
|Elizabeth Koprucki
|-
|Matt Makris
|Elizabeth Koprucki
|-
|Matt Meshulam
|Elizabeth Koprucki
|-
|Mark Cabael
|Elizabeth Koprucki
|-
|[[User:amishhammer|Tom Judge]]
|Elizabeth Koprucki
|-
|[[User:speedebikes|Todd Allen]]
|Elizabeth Koprucki
|-
|[[User:lucas|Lucas Goossen]]
|[[User:amishhammer|Tom Judge]]
|-
|Sonia Yaco
|Elizabeth Koprucki
|-
|Alex Trimm
|Elizabeth Koprucki
|-
|Davis Mazariegos
|Elizabeth Koprucki
|-
|Knute Martell
|Elizabeth Koprucki
|-
|Ryan Neuman
|Elizabeth Koprucki
|-
|Scott Drane
|Elizabeth Koprucki
|-
|James Huber
|Knute Martell
|-
|[[user:kuroishi|Doorman Dave]]
|Elizabeth Koprucki
|-
|Mike Mandrea
|Tom Judge
|-
|[[user:wessing|Erik Wessing]]
|[[user:justin|Justin Conroy]]
|-
|Michael Patton
|Andrew Camardella
|-
|Burton Kent
|Tom Judge
[[Category:Shop Equipment]]
|-
|Niko Hawley
|Tom Judge
|-
|Tom Boeman
|Tom Judge
|-
|Will Alt
|Tom Judge
|-
|[[user:slingerland|Michael Slingerland]]
|Andrew Camardella
|-
|[[User:bobsabayesian|Bob Loos]]
|Andrew Camardella
|-
|[[User:mct|McTavish McArdle]]
|Andrew Camardella
|-
|[[User:esp|Simon Pyle]]
|Andrew Camardella
|-
|Zachery Small
|Michael Patton

|-
|[[User:Leo|Leo]]
|Mohamed Dardiri
|-
|Amir Badri
|Leo Rodman

|-
|Jackson Ammenheuser
|Leo Rodman

|-
|[[skynaya|Sky Nova]]
|Leo Rodman

|-
|[[Mari Belmares]]
|Andrew Camardella

|-
|[[user:headlight|James Villalpando]]
|Andrew Camardella

|-
|[[user:headlight|Jeremy Shaw]]
|Leo Rodman

|-
|Ashley Borg
|Justin Conroy

|-
|Molly Adamski
|Jeremy Shaw

|-
|Mariano Muñoz
|Ashley Borg

|-
|Nathan Upchurch
|Andrew Camardella

|-
|Deanna Williams
|Brad Jimenez

Vinyl Cutter

2022-11-06T19:06:45Z

Thatnaysayer: /* Tips on how to use (After Authorized) */

{{Template:EquipmentPage
|owner=PS:One
|model=Jaguar II |serial=
|arrived=2012
|doesitwork=yes
|contact=2Dprinting at pumpingstationone.org
|where=Arts
|certification=yes
|hackable=no
|value=$2300
|image= Vinylcutter.jpg
|hostarea = 2D Printing
}}

== Status ==
2022-11-06: User permission error keeping printer from working.
2018-11-03: Perfect working condition. Cut 60 square feet today.

== Authorization ==

[[Viral Authorizations|Viral]]. Any authorized user can train and authorize another. Record authorizations on this wiki page, below. At the moment there are no regularly scheduled authorization sessions. Contact/ask an authorized user or the area host.

== Tips on how to use (After Authorized) ==
Quick Start Guide:
[https://drive.google.com/file/d/1Cwop09kOEgQb17iReb2KdIIuPSZlFPF-/view?usp=sharing]

The full manual can be found here:
[https://www.manualslib.com/download/1058726/Gcc-Technologies-Jaguar-Ii-Series.html]

See a [https://www.youtube.com/watch?v=HjMWrVCrecA&t=520s Useful Video].

== Loading Media ==

* Raise the lever on the upper back right of the machine
* Slide in the media (up to 24" or 600mm). It helps to have a rectangular piece so the machine can recognize the size. Center it over some of the grooved rollers so they are as close to the edges as possible.
* Slide the pinch rollers from behind over the grooved roller you chose.
* Lower roller with the lever.
* Read the display and push the arrow button for the type of media you are loading. For a single sheet (not a roll), for example you would press the right arrow (see screen shot below)

Note: It determines the width of the media by the placement of the two outer rollers:[[File:Vinyl Cutter Roller Media Width Sensor.jpeg|thumb|right|100px|Width Sensor]]

== Importing ==

The Software used is CoCut Standard 2015. We no longer use the software that came with the cutter.

The software does import svg or ai files. One thing to be careful with svg is to set your document settings to 96 DPI. This way exporting from your editing software then importing to CoCut Pro will maintain actual physical size.

Notes:

* Make sure to check any files you download from the internet for hidden artifacts
* Make sure all your borders/strokes are set to 0px or you will get 3 cuts for the border (inner stroke, outer stroke and object edge)

== Cutting ==

When your graphic is ready to cut, click the File -> Output menu. This will bring up the "Output to device" window.

Things you need to set on this window:
* Make sure "Settings via comm" is turned on via machine settings.TODO: Need to lookup the actual setting name.
* Pressure: Good starting point is 30g or 1oz. Standard glossy vinyl cuts well at 60g.
* Speed: Good starting point is 10cm/s or 4in/s
* Material Width: Click "Read Material" button. See [[Loading Media]]
* Material Length: Click "Read Material" button. See [[Loading Media]]
* Overcut: Good starting point is 0.25mm or 0.01in

Do Preview your cut because depending on your setting the cut layout is not necessary exactly what you laid out in the svg file. Note also that in the preview you can rearrange the layout, including duplicating, rotating, or removing cuts.

If you're having trouble accepting your media, sunlight from the window may be affecting the sensors. Roll the vinyl cutter away from the direct sunlight.

Note:

The output settings for speed and pressure can be set on the machine itself.
* Turn off "Settings via comm" TODO: Need to lookup the actual setting name.
* Take the cutter offline (hit on/off line button)
* Hit the speed or pressure button
* Use arrow keys to change value
* Hit enter
* Put the cutter online by hitting the on/off line button a second time

=== Blades ===

There are 3 types of blade for the cutter:

* Black Cap - Fine detail cutting - http://www.signtechnologies.net/catalogue/341/8/cutters-and-plotters/P-gcc-jaguar-ii-cutting-plotter
* Green Cap - Sandblasted/reflective materials - http://www.signtechnologies.net/catalogue/84/8/cutters-and-plotters/blades/P-gcc-blade-green-cap-for-sandblastreflective-material
* Red Cap - Standard Vinyl - http://www.signtechnologies.net/catalogue/83/8/cutters-and-plotters/blades/P-gcc-blade-red-cap-for-standard-vinyl

These blades will be arriving shortly.

== Purchasing Materials ==

New Materials can be purchased locally through [http://www.raycosignsupply.com/vinyl-material Rayco] near Peterson and Pulaski, the plotter size is 24 inches. Generally you are on your own for materials; if you use the materials that are near the cutter, it is fair game, and it would be cool if you put some money in the nearby gray donation box or ask the area host how to contribute. Area hosts use donations to buy more materials and parts for machines. Suggested donation $1/square foot?
* Economy/Intermediary stock is for the majority of projects and has an expected life of 3 years
* High performance stock is intended for cars and boats and has an expected life of 7 years.

* Transfer tape: http://www.ebay.com/itm/6-APPLICATION-TRANSFER-Paper-TAPE-300-ft-roll-for-Vinyl-Cutter-PLOTTER-FRESH-/351496781486?hash=item51d6d73eae

== Recommended Authorizers ==

* Kevin Bradley
* Elizabeth Koprucki

== Authorized Users ==

{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Donald Jacobson
|Donald Jacobson
|-
|-
|Bart dring
|Donald Jacobson
|-
|Ray Doeksen
|Elizabeth Koprucki
|-
|[[User:davidfell|David Fell]]
|Elizabeth Koprucki
|-
|[[User:dbever|Derek Bever]]
|Elizabeth Koprucki
|-
|[[User:RogerMoore|Roger Moore]]
|Elizabeth Koprucki
|-
|[[User:tom4writer|Tom Forajter]]
|Elizabeth Koprucki
|-
|[[User:ad9581|Arturo Duarte]]
|Elizabeth Koprucki
|-
|[[User:funk|Tyler Natoli]]
|Elizabeth Koprucki
|-
|Sloan Lavery
|Elizabeth Koprucki
|-
|Tyler Hsu
|Elizabeth Koprucki
|-
|Casey Olson
|Justin and Derek!
|-
|[[User:lgaboarder|Jeff McBride]]
|Elizabeth Koprucki
|-
|[[User:Sparr|Clarence Risher]]
|Elizabeth Koprucki
|-
|[[User:ironwill|Will Garza]]
|Elizabeth Koprucki
|-
|[[User:emertonom|Nick Halderman]]
|Elizabeth Koprucki
|-
|[[User:aaronmintz|Aaron Mintz]]
|Elizabeth Koprucki
|-
|Matt Makris
|Elizabeth Koprucki
|-
|Matt Meshulam
|Elizabeth Koprucki
|-
|Mark Cabael
|Elizabeth Koprucki
|-
|[[User:amishhammer|Tom Judge]]
|Elizabeth Koprucki
|-
|[[User:speedebikes|Todd Allen]]
|Elizabeth Koprucki
|-
|[[User:lucas|Lucas Goossen]]
|[[User:amishhammer|Tom Judge]]
|-
|Sonia Yaco
|Elizabeth Koprucki
|-
|Alex Trimm
|Elizabeth Koprucki
|-
|Davis Mazariegos
|Elizabeth Koprucki
|-
|Knute Martell
|Elizabeth Koprucki
|-
|Ryan Neuman
|Elizabeth Koprucki
|-
|Scott Drane
|Elizabeth Koprucki
|-
|James Huber
|Knute Martell
|-
|[[user:kuroishi|Doorman Dave]]
|Elizabeth Koprucki
|-
|Mike Mandrea
|Tom Judge
|-
|[[user:wessing|Erik Wessing]]
|[[user:justin|Justin Conroy]]
|-
|Michael Patton
|Andrew Camardella
|-
|Burton Kent
|Tom Judge
[[Category:Shop Equipment]]
|-
|Niko Hawley
|Tom Judge
|-
|Tom Boeman
|Tom Judge
|-
|Will Alt
|Tom Judge
|-
|[[user:slingerland|Michael Slingerland]]
|Andrew Camardella
|-
|[[User:bobsabayesian|Bob Loos]]
|Andrew Camardella
|-
|[[User:mct|McTavish McArdle]]
|Andrew Camardella
|-
|[[User:esp|Simon Pyle]]
|Andrew Camardella
|-
|Zachery Small
|Michael Patton

|-
|[[User:Leo|Leo]]
|Mohamed Dardiri
|-
|Amir Badri
|Leo Rodman

|-
|Jackson Ammenheuser
|Leo Rodman

|-
|[[skynaya|Sky Nova]]
|Leo Rodman

|-
|[[Mari Belmares]]
|Andrew Camardella

|-
|[[user:headlight|James Villalpando]]
|Andrew Camardella

|-
|[[user:headlight|Jeremy Shaw]]
|Leo Rodman

|-
|Ashley Borg
|Justin Conroy

|-
|Molly Adamski
|Jeremy Shaw

|-
|Mariano Muñoz
|Ashley Borg

|-
|Nathan Upchurch
|Andrew Camardella

|-
|Deanna Williams
|Brad Jimenez

Vinyl Cutter

2022-11-06T19:04:48Z

Thatnaysayer: /* Status */

{{Template:EquipmentPage
|owner=PS:One
|model=Jaguar II |serial=
|arrived=2012
|doesitwork=yes
|contact=2Dprinting at pumpingstationone.org
|where=Arts
|certification=yes
|hackable=no
|value=$2300
|image= Vinylcutter.jpg
|hostarea = 2D Printing
}}

== Status ==
2022-11-06: User permission error keeping printer from working.
2018-11-03: Perfect working condition. Cut 60 square feet today.

== Authorization ==

[[Viral Authorizations|Viral]]. Any authorized user can train and authorize another. Record authorizations on this wiki page, below. At the moment there are no regularly scheduled authorization sessions. Contact/ask an authorized user or the area host.

== Tips on how to use (After Authorized) ==

The user guide is here
[https://www.manualslib.com/download/1058726/Gcc-Technologies-Jaguar-Ii-Series.html]

See a [https://www.youtube.com/watch?v=HjMWrVCrecA&t=520s Useful Video]

== Loading Media ==

* Raise the lever on the upper back right of the machine
* Slide in the media (up to 24" or 600mm). It helps to have a rectangular piece so the machine can recognize the size. Center it over some of the grooved rollers so they are as close to the edges as possible.
* Slide the pinch rollers from behind over the grooved roller you chose.
* Lower roller with the lever.
* Read the display and push the arrow button for the type of media you are loading. For a single sheet (not a roll), for example you would press the right arrow (see screen shot below)

Note: It determines the width of the media by the placement of the two outer rollers:[[File:Vinyl Cutter Roller Media Width Sensor.jpeg|thumb|right|100px|Width Sensor]]

== Importing ==

The Software used is CoCut Standard 2015. We no longer use the software that came with the cutter.

The software does import svg or ai files. One thing to be careful with svg is to set your document settings to 96 DPI. This way exporting from your editing software then importing to CoCut Pro will maintain actual physical size.

Notes:

* Make sure to check any files you download from the internet for hidden artifacts
* Make sure all your borders/strokes are set to 0px or you will get 3 cuts for the border (inner stroke, outer stroke and object edge)

== Cutting ==

When your graphic is ready to cut, click the File -> Output menu. This will bring up the "Output to device" window.

Things you need to set on this window:
* Make sure "Settings via comm" is turned on via machine settings.TODO: Need to lookup the actual setting name.
* Pressure: Good starting point is 30g or 1oz. Standard glossy vinyl cuts well at 60g.
* Speed: Good starting point is 10cm/s or 4in/s
* Material Width: Click "Read Material" button. See [[Loading Media]]
* Material Length: Click "Read Material" button. See [[Loading Media]]
* Overcut: Good starting point is 0.25mm or 0.01in

Do Preview your cut because depending on your setting the cut layout is not necessary exactly what you laid out in the svg file. Note also that in the preview you can rearrange the layout, including duplicating, rotating, or removing cuts.

If you're having trouble accepting your media, sunlight from the window may be affecting the sensors. Roll the vinyl cutter away from the direct sunlight.

Note:

The output settings for speed and pressure can be set on the machine itself.
* Turn off "Settings via comm" TODO: Need to lookup the actual setting name.
* Take the cutter offline (hit on/off line button)
* Hit the speed or pressure button
* Use arrow keys to change value
* Hit enter
* Put the cutter online by hitting the on/off line button a second time

=== Blades ===

There are 3 types of blade for the cutter:

* Black Cap - Fine detail cutting - http://www.signtechnologies.net/catalogue/341/8/cutters-and-plotters/P-gcc-jaguar-ii-cutting-plotter
* Green Cap - Sandblasted/reflective materials - http://www.signtechnologies.net/catalogue/84/8/cutters-and-plotters/blades/P-gcc-blade-green-cap-for-sandblastreflective-material
* Red Cap - Standard Vinyl - http://www.signtechnologies.net/catalogue/83/8/cutters-and-plotters/blades/P-gcc-blade-red-cap-for-standard-vinyl

These blades will be arriving shortly.

== Purchasing Materials ==

New Materials can be purchased locally through [http://www.raycosignsupply.com/vinyl-material Rayco] near Peterson and Pulaski, the plotter size is 24 inches. Generally you are on your own for materials; if you use the materials that are near the cutter, it is fair game, and it would be cool if you put some money in the nearby gray donation box or ask the area host how to contribute. Area hosts use donations to buy more materials and parts for machines. Suggested donation $1/square foot?
* Economy/Intermediary stock is for the majority of projects and has an expected life of 3 years
* High performance stock is intended for cars and boats and has an expected life of 7 years.

* Transfer tape: http://www.ebay.com/itm/6-APPLICATION-TRANSFER-Paper-TAPE-300-ft-roll-for-Vinyl-Cutter-PLOTTER-FRESH-/351496781486?hash=item51d6d73eae

== Recommended Authorizers ==

* Kevin Bradley
* Elizabeth Koprucki

== Authorized Users ==

{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Donald Jacobson
|Donald Jacobson
|-
|-
|Bart dring
|Donald Jacobson
|-
|Ray Doeksen
|Elizabeth Koprucki
|-
|[[User:davidfell|David Fell]]
|Elizabeth Koprucki
|-
|[[User:dbever|Derek Bever]]
|Elizabeth Koprucki
|-
|[[User:RogerMoore|Roger Moore]]
|Elizabeth Koprucki
|-
|[[User:tom4writer|Tom Forajter]]
|Elizabeth Koprucki
|-
|[[User:ad9581|Arturo Duarte]]
|Elizabeth Koprucki
|-
|[[User:funk|Tyler Natoli]]
|Elizabeth Koprucki
|-
|Sloan Lavery
|Elizabeth Koprucki
|-
|Tyler Hsu
|Elizabeth Koprucki
|-
|Casey Olson
|Justin and Derek!
|-
|[[User:lgaboarder|Jeff McBride]]
|Elizabeth Koprucki
|-
|[[User:Sparr|Clarence Risher]]
|Elizabeth Koprucki
|-
|[[User:ironwill|Will Garza]]
|Elizabeth Koprucki
|-
|[[User:emertonom|Nick Halderman]]
|Elizabeth Koprucki
|-
|[[User:aaronmintz|Aaron Mintz]]
|Elizabeth Koprucki
|-
|Matt Makris
|Elizabeth Koprucki
|-
|Matt Meshulam
|Elizabeth Koprucki
|-
|Mark Cabael
|Elizabeth Koprucki
|-
|[[User:amishhammer|Tom Judge]]
|Elizabeth Koprucki
|-
|[[User:speedebikes|Todd Allen]]
|Elizabeth Koprucki
|-
|[[User:lucas|Lucas Goossen]]
|[[User:amishhammer|Tom Judge]]
|-
|Sonia Yaco
|Elizabeth Koprucki
|-
|Alex Trimm
|Elizabeth Koprucki
|-
|Davis Mazariegos
|Elizabeth Koprucki
|-
|Knute Martell
|Elizabeth Koprucki
|-
|Ryan Neuman
|Elizabeth Koprucki
|-
|Scott Drane
|Elizabeth Koprucki
|-
|James Huber
|Knute Martell
|-
|[[user:kuroishi|Doorman Dave]]
|Elizabeth Koprucki
|-
|Mike Mandrea
|Tom Judge
|-
|[[user:wessing|Erik Wessing]]
|[[user:justin|Justin Conroy]]
|-
|Michael Patton
|Andrew Camardella
|-
|Burton Kent
|Tom Judge
[[Category:Shop Equipment]]
|-
|Niko Hawley
|Tom Judge
|-
|Tom Boeman
|Tom Judge
|-
|Will Alt
|Tom Judge
|-
|[[user:slingerland|Michael Slingerland]]
|Andrew Camardella
|-
|[[User:bobsabayesian|Bob Loos]]
|Andrew Camardella
|-
|[[User:mct|McTavish McArdle]]
|Andrew Camardella
|-
|[[User:esp|Simon Pyle]]
|Andrew Camardella
|-
|Zachery Small
|Michael Patton

|-
|[[User:Leo|Leo]]
|Mohamed Dardiri
|-
|Amir Badri
|Leo Rodman

|-
|Jackson Ammenheuser
|Leo Rodman

|-
|[[skynaya|Sky Nova]]
|Leo Rodman

|-
|[[Mari Belmares]]
|Andrew Camardella

|-
|[[user:headlight|James Villalpando]]
|Andrew Camardella

|-
|[[user:headlight|Jeremy Shaw]]
|Leo Rodman

|-
|Ashley Borg
|Justin Conroy

|-
|Molly Adamski
|Jeremy Shaw

|-
|Mariano Muñoz
|Ashley Borg

|-
|Nathan Upchurch
|Andrew Camardella

|-
|Deanna Williams
|Brad Jimenez

Vote To Replace Large Format Printer

2022-11-03T14:36:07Z

Thatnaysayer: /* Member Input */

[[Category:Votes]]
[[Category:2022 Votes]]

== Title==
Vote To Replace Large Format Printer

== Sponsor ==
Davis Sayer (2D Area Host)

== Co-Sponsors ==
* Lydia Miller
* Ben Tiefeld

== Vote Results ==
Quorum:[ ]
Yea Votes: [ ]
Nay Votes: [ ]
Present or Abstain: [ ]

== Definition of "Language" ==
"The wording of a legal document." [tfd.com/language]

== Schedule ==
==== Proposal Date ====
Date this proposal was posted to the membership and a request for a vote date was sent to the Board.

'''[DATE]'''

==== Member Input ====
Does the Sponsor choose to open the language of the vote for changes due to member input? (optional and can be modified at any time)

'''[ ] YES [X] NO'''

==== Vote Announcement and Beginning Date of the Discussion Period ====
The announcement date of the vote proposal is the beginning date of the seven-day (minimum) posting and Member discussion period. (Certain exceptional vote types have longer discussion periods. Check the Bylaws if you are unsure.)'' If the Sponsor has chosen to include member input, suggested edits can be made in a shared document or other collaborative vehicle until the language is locked. The sponsor can stop taking suggestions at any time. ''

'''[DATE]'''

==== Language Lock Date and Start of Voting ====
Five days prior to the Day of the Vote, the vote language is locked, all edits are frozen, and the language of the vote is converted to a pdf file. Ballots that include the pdf are sent to the Membership, and electronic voting begins. '' Note that the minimum discussion period of seven days leaves only two days for changes before the lock takes place. ''

'''[DATE]'''

==== Day of the Vote ====

Date the Board has assigned for the vote. The Day of the Vote is the day the vote closes.

'''[DATE]'''

== Background ==
This is a proposal to authorize the PS:1 Board of Directors to spend up to $6000 on the purchase of a large format printer to replace the defunct Epson Stylus Pro 9800.

The 2d area host will decide which printer to purchase based on maintaining the current level of quality and expanding on usability.

== Language of the Vote ==
We authorize the board of directors or a representative of the board to spend up to $6000 on the purchase of a large format printer and related supplies.

Vote To Replace Large Format Printer

2022-10-20T19:01:02Z

Thatnaysayer:

[[Category:Votes]]

== Vote To Purchase a Replacement For The Large Format Printer ==

== Sponsor ==
Davis Sayer

== Co-Sponsors ==
Lydia Miller

Ben Tiefeld

== Schedule ==
==== Proposal Date ====

'''10/20/2022'''

==== Member Input ====
Does the Sponsor choose to open the language of the vote for changes due to member input? (optional and can be modified at any time)

'''[X] YES [ ] NO'''

==== Day of the Vote ====

==== Results ====

== Language of the Vote ==

This is a proposal to authorize the PS:1 Board of Directors to spend up to $6000 on the purchase of a large format printer to replace the defunct Epson Stylus Pro 9800.

The 2d area host will decide which printer to purchase based on maintaining the current level of quality and expanding on usability.

Vote To Replace Large Format Printer

2022-10-20T19:00:37Z

Thatnaysayer: Created page with "Category:Votes == Vote To Purchase a Replacement For The Large Format Printer == == Sponsor == Davis Sayer == Co-Sponsors == Lydia Miller Ben Tiefeld == Schedule ==..."

[[Category:Votes]]

== Vote To Purchase a Replacement For The Large Format Printer ==

== Sponsor ==
Davis Sayer

== Co-Sponsors ==
Lydia Miller
Ben Tiefeld

== Schedule ==
==== Proposal Date ====

'''10/20/2022'''

==== Member Input ====
Does the Sponsor choose to open the language of the vote for changes due to member input? (optional and can be modified at any time)

'''[X] YES [ ] NO'''

==== Day of the Vote ====

==== Results ====

== Language of the Vote ==

This is a proposal to authorize the PS:1 Board of Directors to spend up to $6000 on the purchase of a large format printer to replace the defunct Epson Stylus Pro 9800.

The 2d area host will decide which printer to purchase based on maintaining the current level of quality and expanding on usability.

Category:2D Printing

2022-09-27T20:13:54Z

Thatnaysayer:

{{Infobox HostedArea
| image = Equipment-no-photo.jpg
| areaname = 2D Printing
| location = Some on First and Second Floor
| toolcategory =
| hostname = Davis Sayer
| hostphone =
| hostemail =2dprinting@pumpingstationone.org
| hostother =
| hosthours =
| hostcerts =
}}

== Rules ==
Please reach out with any questions about printer issues either at the 2d printing email or on Slack.
== Certifications ==

* Large Format Printer Authorizations must be scheduled
* Viral authorizations for the vinyl cutter
* Other printers do not require authorizations (excluding the sublimation printer, which is under graphic arts and textiles)

[[Category:Hosted Areas]]
[[Category:Member Manual]]
[[Category:Equipment]]
[[Category:Projects]]
[[Category:Tutorials]]

Canon PIXMA Pro 9000 Mark II

2022-09-11T15:07:46Z

Thatnaysayer:

{{ Template:EquipmentPage
| owner=PS:One
| model=Canon PIXMA Pro 9000 Mark II
| serial=SERIAL NUMBER
| arrived= N/A
| where=Arts
| certification=no
| contact=Arts Area Host
| hackable=no
| value=$500
| image =
| hostarea = 2D Printing
| doesitwork=yes
}}

== Status ==
Fully working as of 9/10/2022 - Head has been fully cleaned and inks replaced. There is a spare set of ink if needed. Please let the area host know if the ink needs to be replaced.

== Description ==
A wide color gamut pro quality photo printer.

Prints up to 13"x19" at 4800 x 2400 dpi

'''Features'''

Borderless Printing

Fine Art Paper Support

Grayscale Photo Printing

[https://www.officestationery.co.uk/documents/224678.pdf PDF User Manual]

'''Manufacturer description:'''

Prepared to step-up and produce professional quality photo prints? The PIXMA Pro9000 Mark II possesses the functionality and technology you need for high-quality output so you can be the photographer you've always wanted to be. Its 8-color ink system widens your color palette along with advanced Easy-PhotoPrint Pro software to fine tune your prints plus Ambient Light Correction1 which optimizes color output to match the specified lighting condition you would display in. This fantastic printer does all of this and more while supporting Canon Fine Art Photo Papers up to 13" x 19" with two separate paper paths, including a front feeder for heavyweight paper types.

https://www.dpreview.com/products/canon/printers/canon_pixmapro9000markii

Canon PIXMA Pro 9000 Mark II

2022-09-11T15:07:10Z

Thatnaysayer:

{{ Template:EquipmentPage
| owner=PS:One
| model=Canon PIXMA Pro 9000 Mark II
| serial=SERIAL NUMBER
| arrived= N/A
| where=Arts
| certification=no
| contact=Arts Area Host
| hackable=no
| value=$500
| image =
| hostarea = 2D Printing
| doesitwork=yes
}}

== Status ==
Fully working as of 9/10/2022 - Head has been fully cleaned and inks replaced. There is a spare set of ink if needed. Please let the area host know if the ink needs to be replaced.

== Description ==
A wide color gamut pro quality photo printer.

Prints up to 13"x19" at 4800 x 2400 dpi

'''Features'''

Borderless Printing

Fine Art Paper Support

Grayscale Photo Printing

[https://www.officestationery.co.uk/documents/224678.pdf PDF User Manual]

Manufacturer description: Prepared to step-up and produce professional quality photo prints? The PIXMA Pro9000 Mark II possesses the functionality and technology you need for high-quality output so you can be the photographer you've always wanted to be. Its 8-color ink system widens your color palette along with advanced Easy-PhotoPrint Pro software to fine tune your prints plus Ambient Light Correction1 which optimizes color output to match the specified lighting condition you would display in. This fantastic printer does all of this and more while supporting Canon Fine Art Photo Papers up to 13" x 19" with two separate paper paths, including a front feeder for heavyweight paper types.

https://www.dpreview.com/products/canon/printers/canon_pixmapro9000markii

Canon PIXMA Pro 9000 Mark II

2022-09-11T15:06:43Z

Thatnaysayer:

{{ Template:EquipmentPage
| owner=PS:One
| model=Canon PIXMA Pro 9000 Mark II
| serial=SERIAL NUMBER
| arrived= N/A
| where=Arts
| certification=no
| contact=Arts Area Host
| hackable=no
| value=$500
| image =
| hostarea = 2D Printing
| doesitwork=yes
}}

== Status ==
Fully working as of 9/10/2022 - Head has been fully cleaned and inks replaced. There is a spare set of ink if needed. Please let the area host know if the ink needs to be replaced.

== Description ==
A wide color gamut pro quality photo printer.

Prints up to 13"x19" at 4800 x 2400 dpi

'''Features'''
Borderless Printing
Fine Art Paper Support
Grayscale Photo Printing

[https://www.officestationery.co.uk/documents/224678.pdf PDF User Manual]

Manufacturer description: Prepared to step-up and produce professional quality photo prints? The PIXMA Pro9000 Mark II possesses the functionality and technology you need for high-quality output so you can be the photographer you've always wanted to be. Its 8-color ink system widens your color palette along with advanced Easy-PhotoPrint Pro software to fine tune your prints plus Ambient Light Correction1 which optimizes color output to match the specified lighting condition you would display in. This fantastic printer does all of this and more while supporting Canon Fine Art Photo Papers up to 13" x 19" with two separate paper paths, including a front feeder for heavyweight paper types.

https://www.dpreview.com/products/canon/printers/canon_pixmapro9000markii

Xerox Workcentre 7855 Printer / Scanner / Copier

2022-07-10T21:29:36Z

Thatnaysayer: /* Printing */

{{Infobox Equipment
| image = {{{image|}}}
| owner = PS1
| serial =
| model = Xerox 7855
| arrived = December 2020
| doesitwork = Yes
| contact = 2dprinting at pumpingstationone.org
| where = Lounge
| authorization = No authorization needed
| hackable = No
| value = $1900
| hostarea = 2D Printing
}}

{{Template:EquipmentLabel
| owner = PS1
| authorization = No authorization required
| hackable = No
| hostarea = 2D Printing
}}

{{#subobject:
|Has value={{{value|}}}
}}

= Printing =

== Printing from a PS1 Workstation ==
Pint your document as you normally would. Be sure to choose the Xerox 7855 printer.

== Printing from a computer other than a PS1 Workstation ==

=== Printing from Windows ===
Add a new printer in Windows settings. A search should find the Xerox 7855 - add it, then open your document and print normally.

=== Printing from a Mac ===

need to test this...

== Printing from a phone/tablet device ==

=== Printing from an android device ===

1. Install this on your android device: https://play.google.com/store/apps/details?id=com.xerox.printservice

2. Be sure you're on the PS1 network

3. Print your document normally, being sure to choose the Xerox 7855 printer.

=== Printing from an iPhone ===

need to test this...

=== Printing from an android device ===

== ICC Color Profile ==

Download the ICC Color Profile for the printer can be found here:

https://drive.google.com/file/d/1ACSaggado4XE_UXFf_9lC5Sq-0jCpHf-/view?usp=sharing

= Scanning & Copying =

== Scan & Send to Email ==
To scan an item using the flatbed scanner

1. open the lid, put your item on the scanning bed, and closed the lid.

2. click the 'email' icon on the home screen

3. enter email addresses

4. set scanning & email options

5. press the start button

Xerox Workcentre 7855 Printer / Scanner / Copier

2022-07-10T21:29:16Z

Thatnaysayer: /* Printing */

{{Infobox Equipment
| image = {{{image|}}}
| owner = PS1
| serial =
| model = Xerox 7855
| arrived = December 2020
| doesitwork = Yes
| contact = 2dprinting at pumpingstationone.org
| where = Lounge
| authorization = No authorization needed
| hackable = No
| value = $1900
| hostarea = 2D Printing
}}

{{Template:EquipmentLabel
| owner = PS1
| authorization = No authorization required
| hackable = No
| hostarea = 2D Printing
}}

{{#subobject:
|Has value={{{value|}}}
}}

= Printing =

== Printing from a PS1 Workstation ==
Pint your document as you normally would. Be sure to choose the Xerox 7855 printer.

== Printing from a computer other than a PS1 Workstation ==

=== Printing from Windows ===
Add a new printer in Windows settings. A search should find the Xerox 7855 - add it, then open your document and print normally.

=== Printing from a Mac ===

need to test this...

== Printing from a phone/tablet device ==

=== Printing from an android device ===

1. Install this on your android device: https://play.google.com/store/apps/details?id=com.xerox.printservice

2. Be sure you're on the PS1 network

3. Print your document normally, being sure to choose the Xerox 7855 printer.

=== Printing from an iPhone ===

need to test this...

=== Printing from an android device ===

=== ICC Color Profile ===

Download the ICC Color Profile for the printer can be found here:

https://drive.google.com/file/d/1ACSaggado4XE_UXFf_9lC5Sq-0jCpHf-/view?usp=sharing

= Scanning & Copying =

== Scan & Send to Email ==
To scan an item using the flatbed scanner

1. open the lid, put your item on the scanning bed, and closed the lid.

2. click the 'email' icon on the home screen

3. enter email addresses

4. set scanning & email options

5. press the start button

Xerox Workcentre 7855 Printer / Scanner / Copier

2022-07-10T21:28:29Z

Thatnaysayer: /* Printing */

{{Infobox Equipment
| image = {{{image|}}}
| owner = PS1
| serial =
| model = Xerox 7855
| arrived = December 2020
| doesitwork = Yes
| contact = 2dprinting at pumpingstationone.org
| where = Lounge
| authorization = No authorization needed
| hackable = No
| value = $1900
| hostarea = 2D Printing
}}

{{Template:EquipmentLabel
| owner = PS1
| authorization = No authorization required
| hackable = No
| hostarea = 2D Printing
}}

{{#subobject:
|Has value={{{value|}}}
}}

= Printing =

== Printing from a PS1 Workstation ==
Pint your document as you normally would. Be sure to choose the Xerox 7855 printer.

== Printing from a computer other than a PS1 Workstation ==

=== Printing from Windows ===
Add a new printer in Windows settings. A search should find the Xerox 7855 - add it, then open your document and print normally.

=== Printing from a Mac ===

need to test this...

== Printing from a phone/tablet device ==

=== Printing from an android device ===

1. Install this on your android device: https://play.google.com/store/apps/details?id=com.xerox.printservice

2. Be sure you're on the PS1 network

3. Print your document normally, being sure to choose the Xerox 7855 printer.

=== Printing from an iPhone ===

need to test this...

=== Printing from an android device ===

ICC Color Profile for the printer can be found here:

https://drive.google.com/file/d/1ACSaggado4XE_UXFf_9lC5Sq-0jCpHf-/view?usp=sharing

= Scanning & Copying =

== Scan & Send to Email ==
To scan an item using the flatbed scanner

1. open the lid, put your item on the scanning bed, and closed the lid.

2. click the 'email' icon on the home screen

3. enter email addresses

4. set scanning & email options

5. press the start button

Tier 1 Cold Metals Authorization

2022-01-07T03:36:01Z

Thatnaysayer:

[[Category:Cold Metals]]

In the cold metals area we have grouped together authorizations on the non-precision cutting tools into a single authorization. The [[Rockwell drill press]], [[Johnson Bandsaw]], and [[DoAll Bandsaw]] are under the Cold Metals Tier 1 authorization process. The session covers basic operation and safety on the machines.

'''NOTE: Prior to April 2017, the [[Bench Grinder (6in)]], [[Sears Belt Sander|Belt Sander]], and [[DeWalt Chop Saw]] were included in this authorization.'''

Monitor the mailing list for times and dates, or contact one of the listed authorizers.

= Tools Requiring Cold Metals Tier 1 =

[[Clausing Lathe|Clausing metal lathe]]

[[Bridgeport Knee Mill|Bridgeport milling machine]]

[[Tormach 1100 series CNC mill|Tormach CNC Mill]]

= Cold Metals Tier 1 Authorizers =

Please consult the [[Volunteer_Positions#Cold_Metals_Authorizers]] page for a current list of Cold Metals Tier 1 authorization volenteers

== How to become a Authorizer ==

We want as many people available to do Cold Metals Tier 1 authorizations as we can get. The idea is to promote safety, and get people used to the sounds that a machine tool cutting well makes.

New authorizers get authorized to authorize others by (1) having some amount of presence in the shop and (2) closely following the "script" during EITHER a "dry-run" authorizing session given to an authorized authorizer -- or conducting a real-live authorizing session while being observed by an authorized authorizer. During such a session, the observing authorizer should _not_ have to speak. Obviously if the new authorizer-to-be has *significant* problems in communication of the content of the "script", the observing authorizer will contribute to the discussion. For the new authorizer-to-be it's a test, not an opportunity for team-teaching.

= Tool information =

== Safety ==

=== General Personal Safety, and Consideration of Others ===

You must work safely. Your actions must not threaten the safety of you, of others, or the tools.You should never operate machine tools under the influence of drugs (prescription or otherwise) or alcohol.It is your responsibility to protect your eyes. Safety goggles may be provided in the cage for activities that have the potential to generate flying particles. Activities which may, depending on circumstances generate flying particles include but are not limited to drilling, sawing, lathing, milling, hammering, chiseling, grinding, and belt sanding. Don't use goggles which are dirty or fogged-up. If cleaning is required cleansing pads may be available in the cage. To clean your goggles, all surfaces that have contact with the skin must be wiped down. The lens should be wiped down, both front and inside. If you choose to use purchase your own goggles be sure they are rated for labeled z87 (this should be written or stamped on the side of all goggles) and have side shields.Disposable earplugs may be supplied in the cage. Follow the instructions on the dispenser. They are surprisingly more effective if you do. Many types of Personal Protective Equipment (PPE) are not effective if used improperly. If you don't know whether or how to use your protective equipment, read the instructions.Because of cost and hygiene problems, PS:1 cannot be depended upon to stock dust masks/respirators. If your work has the potential to generate dusts, mists, or vapors, you may proceed only by following these rules:

# Get your own respiratory protection. Ace Hardware has many types. Make sure the mask or filter is really for the substance confronting you. Do not, for instance, use a paper dust mask for organic paint fumes. Follow the mask manufacturer's instructions.
# Work in the back dock when possible, or with an exhaust fan on.
# If it is necessary to work in the main shop be sure you aren't inflicting your fumes or dust on someone else. It would be excellent if you as the fume generator waits until no one is present who could be harmed or inconvenienced by your activities.

When using power tools, remove gloves, watches, jewelry, and roll up your sleeves. Keep your hair tied back and tucked away. This is especially true for the drill presses, mill, and lathe. Tools with moving parts can injure your hands or catch your hair and pull your head into the machine. Gloves and loose clothing can also get caught in moving machinery. Never put your hand in the vicinity of any moving part of any machine. When adjusting the speed of a belt-driven machine (drill press, lathe, mill or other step-pulley drive) unplug the machine before putting your hands into the drive belts. Every Time.If in using any machine that cuts material, you cannot see a cut in progress because of chips or dust produced by the cutting process, a chip brush to clear the work zone -- never use your hands while the tool is on.PS:1 keeps fire extinguishers and first aid supplies on hand. It would be good to familiarize yourself with their locations before you begin your work.

It is best to not work alone in the shop while using machine tools. If you are hurt and cannot dial 911, another person in the space could do that for you. Use the right tool for the job. Incorrect tool usage produces bad results, and can be detrimental to you, your work, and the tools.Knowing a tool is knowing how it works. For instance, power tools make different sounds when they are working. Some sounds are HAPPY and some sounds are SAD. If you don't know how a tool should work, in spite of the demonstration given with this authorization, ask somebody who does know.

=== Safe and Proper Use of the Power Tools ===
This is not an instructional guide to being a machinist. For skill development in using tools in fabrication, you should take a class of some kind and practice, practice, practice. In this authorization, you will be shown only the basic operation of the tools. The purpose of these minimal illustrations of technique is so that you might have some idea of the types of things the tools are capable of. Authorization gives you permission to use the tools. Authorization to use the tools is not a certification of your competence.

== Tool use ==

=== [[Johnson Bandsaw|Horizontal Bandsaw]] ===

The horizontal bandsaw is only for cutting metals.

Clamp your work securely in the vise. Be sure that the work cannot rotate or flip around in the vise when the saw is pulling the blade through the cut. Close the blade guides to the minimum distance that will (1) clear the workpiece and (2) not interfere with the movement of the saw at the bottom end of its travel.

Set the force-control weight to apply proper pressure to the cut. In most cases, this is at minimum. (Closer to the motor is less cut force). Open the hydraulic valve to produce a good feed rate. If the blade seems like it's starting to snag the workpiece or clog the teeth, take a lighter cut by decreasing the feed rate. If the saw is not producing a chip, increase the feed rate. Unless there is a reason to be taking a very light cut, the sound of the saw teeth should be consistent during the entire rotation of the blade. Except when taking a very light cut, the sound of the saw teeth contacting the material should be consistent and chips should form at an even rate. Using coolant helps to preserve blade life, and increase the speed and quality of the cut. It also makes a mess.

A major cause of blade breakage is thin workpieces snagging the saw blade teeth. Snagging causes teeth to be broken and can also cause the blade to stall or come off the wheels. Check the blade for missing teeth before using the saw. A blade with missing teeth is usually not fit for use. Using a fine pitch blade on soft materials like aluminum can clog the teeth and cause the blade to grab the work and stall. Be sure the chips are clearing the teeth. If not, use coolant or a wire brush to push the chips from the teeth. Using a coarse blade on steel will cause the teeth to snag on the work and break off. Turning the saw off (stopping the motor) while the saw is in a cut can cause broken teeth. Any problem that can break a tooth can also cause the blade to come off the wheels. Use the right blade for the work. Trying to mediate a cut on the horizontal bandsaw can cause saw blade teeth to be knocked off the blade; set the saw to lower the blade slowly into the work and then let go. Be gentle with the hydraulic valve. It only requires a feather touch to turn it. Over-torquing the valve handle can damage the valve. If your workpiece gets snagged and stuck on the blade, stop the saw immediately. Unplug the saw, then try to pull the workpiece straight down off the blade.

To free the stuck workpiece, use a rocking or wiggling motion, in-line with the axis of the blade. Don't twist the blade. A bend or kink ruins the blade. If you still can't get your workpiece off the blade, don't force it. Tag the saw as “out of order” and post a message to the list saying “The blade on the horizontal bandsaw is stuck. Could someone please un-stick it.” If the blade comes off the wheels, tag the saw and post the problem to the list.

= People who are Authorized for Cold Metals Tier 1 =
{| class="wikitable" border="1"
! Qualified Member
! Trained By
!Date Trained
|-
|Will Brown
|Sam
|9/5/18
|-
|Adam Glick
|Ed Bennett
|
|-
|Jeffrey Camealy
|Ed Bennett
|
|-
|Tina Croniser
|Ed Bennett
|
|-
|Sevin Straus
|Ed Bennett
|
|-
|Vladamir Riazanski
|Ed Bennett
|
|-
|James Porter
|Ed Bennett
|
|-
|Greg Teiber
|Ed Bennett
|
|-
|Everett Wilson
|Ed Bennett
|
|-
|Derek Bever
|Ed Bennett
|
|-
|Jay Hopkins
|Ed Bennett
|
|-
|James Porter
|Ed Bennett
|
|-
|Eric Stein
|Tucker Tomlnson
|
|-
|Todd Allen
|Ed Bennett
|
|-
|Mac MacDevitt
|Ed Bennett
|
|-
|[[User:scyg|Simon Cygielski]]
|Ed Bennett
|
|-
|Robb Rigs
|Ed Bennett
|
|-
|Arturo Duarte
|Ed Bennett
|
|-
|Michael Skilton
|Tucker Tomlinson
|
|-
|[[User:Justin|Justin T. Conroy]]
|Ed Bennett
|
|-
|[[User:davidfell|David Fell]]
|Ed Bennett
|
|-
|[[User:rdoeksen|Ray Doeksen]]
|Ed Bennett
|
|-
|Ryan Pierce
|Ed Bennett
|
|-
|Elizabeth Koprucki
|Ed Bennett
|
|-
|Casey Olson
|Ed Bennett
|
|-
|Ron Olson
|Ed Bennett
|
|-
|Thomas Wright
|Ed Bennett
|
|-
|Tom Judge
|Tucker Tomlinson
|
|-
|Edward Muela
|Anna Yu
|5/13/14
|-
|Samuel Swope
|Anna Yu
|5/13/14
|-
|Chris Agocs
|Anna Yu
|6/3/14
|-
|Justine Miles
|Anna Yu
|6/3/14
|-
|Robert Grossman
|Ed Bennett
|
|-
|Tom Forajter
|Thomas Wright
|
|-
|[[User:ahbaker|Alan Baker]]
|Tucker Tomlinson
|
|-
|Jeff McBride
|Ed Bennett
|10/9/14
|-
|Mike Kislovsky
|Ed Bennett
|10/9/14
|-
|Arjun Wadnerkar
|Ed Bennett
|10/9/14
|-
|Oscar Villareal
|Ed Bennett
|10/9/14
|-
|TomF (? 7-17)
|Thomas Wright
|
|-
|Rich Smith
|Thomas Wright
|
|-
|George Shaw
|Thomas Wright
|
|-
|Ron Bean
|Ed Bennett
|
|-
|John Butera
|Ed Bennett
|10/18/14
|-
|Alex Schaffer
|Ed Bennett
|10/18/14
|-
|Daniel Loeser
|Ed Bennett
|10/18/14
|-
|Jonathan Bisson
|Ed Bennett
|10/18/14
|-
|Kyle Bieneman
|Todd Allen
|11/09/14
|-
|Scott Little
|Todd Allen
|11/09/14
|-
|RJ Metzger
|Todd Allen
|11/09/14
|-
|Giovanni Arroyo
|Todd Allen
|11/09/14
|-
|Joao Santos
|Todd Allen
|11/26/14
|-
|Nicholas Haldereman
|Todd Allen
|11/26/14
|-
|Doorman Dave
|Todd Allen
|11/26/14
|-
|Stephen Ioannou
|Todd Allen
|11/26/14
|-
|Lucas Goossen
|Todd Allen
|12/10/14
|-
|[[user:RogerMoore|Roger Moore]]
|Todd Allen
|12/10/14
|-
|[[User:Mwilkens|Matt Wilkens]]
|Todd Allen
|12/10/14
|-
|Rhonda Jackson
|Todd Allen
|12/10/14
|-
|Matt Meshulam
|Todd Allen
|12/21/14
|-
|Kevin Pulver
|Todd Allen
|12/21/14
|-
|Andrew Camardella
|Todd Allen
|12/21/14
|-
|Mike Coriale
|Todd Allen
|12/21/14
|-
|Nick Naro
|Todd Allen
|1/11/15
|-
|John Farmer
|Todd Allen
|1/11/15
|-
|[[user:Jaypee|Jay Pee]]
|Todd Allen
|1/11/15
|-
|Sam Paris
|Todd Allen
|1/21/2015
|-
|Jake Rush
|Todd Allen
|1/21/2015
|-
|Carolyn Ignacio
|Todd Allen
|1/21/2015
|-
|Andrew Sowa
|Todd Allen
|1/21/2015
|-
|Hilary Lee
|Todd Allen
|1/21/2015
|-
|Eric Slehofer
|Todd Allen
|1/28/2015
|-
|Sam Reicks
|Todd Allen
|1/28/2015
|-
|Tyler Matthew
|Todd Allen
|1/28/2015
|-
|Ben Bogler
|Todd Allen
|1/28/2015
|-
|Brittany Krawczyk
|Todd Allen
|1/28/2015
|-
|Cary Lahucik
|Todd Allen
|1/28/2015
|-
|Eric Yu
|Todd Allen
|2/8/2015
|-
|Davis Mazariegos
|Todd Allen
|2/8/2015
|-
|Dan Baltudis
|Todd Allen
|2/8/2015
|-
|Shae Kurko
|Todd Allen
|2/25/2015
|-
|Curtiss Cooke
|Todd Allen
|02/08/15
|-
|Ryan Taylor
|Everett Wilson
|03/04/15
|-
|Joe Wallace
|Todd Allen
|03/08/15
|-
|Josh Myers
|Todd Allen
|03/08/15
|-
|[[User:glenn|Glenn Powers]]
|Todd Allen
|03/08/15
|-
|Daniel Sojka
|Todd Allen
|03/25/2015
|-
|Michael Patton
|Todd Allen
|03/25/2015
|-
|Kevin M Sampson
|Todd Allen
|07/22/2015
|-
|Steve Farkas
|Everett Wilson

|-
|Josh Cooper
|Todd Allen
|09/30/2015
|-
|Sheila Miguez
|Everett Wilson
|2015/12/29
|-
|Zonghe Chua
|Michael Patton
|1/10/16
|-
|Brandon Love
|Michael Patton
|1/27/16
|-
|John McDonald
|Michael Patton
|3/6/16
|-
|Zachery Small
|Michael Patton
|5/1/16
|-
|Josh Younger
|Michael Patton
|5/7/16
|-
|Andy Muhic
|Michael Patton
|5/7/16
|-
|Spencer Simms
|Michael Patton
|5/26/16
|-
|Noah Lambert
|Michael Patton
|6/15/16
|-
|Ian Monroe
|Michael Patton
|6/29/16
|-
|Joe Iklov
|Michael Patton
|6/29/16
|-
|Jim Brink
|Michael Patton
|6/29/16
|-
|[[user:mct|McTavish McArdle]]
|Michael Patton
|2016-07-10
|-
|Patrick Bowling
|Michael Patton
|8/14/16
|-
|Ashley Matrisciano
|Michael Patton
|8/14/16
|-
|Juan Ramos
|Michael Patton
|8/14/16
|-
|Leo Rodman
|Dean?
|9/14/16
|-
|Dan Conrad
|Michael Patton
|10/05/16
|-
|Aaron Mintz
|Michael Patton
|10/20/16
|-
|Brian Carstensen
|Michael Patton
|10/20/16
|-
|Chris Ruhland
|Michael Patton
|11/7/16
|-
|Simon Pyle
|Michael Patton
|12/5/16
|-
|Josip Fijacko
|Michael Patton
|12/5/16
|-
|Adam Stein
|Michael Patton
|1/14/17
|-
|Alex Berkowitz
|
|-
|Ese Osaghae
|Chris Ruhland
|01/14/17
|-
|Paul McClay
|Chris Ruhland
|3/23/17
|-
|Ed Breuer
|Chris Ruhland
|04/09/2017
|-
|Haddon Pearson
|Chris Ruhland
|4/29/17
|-
|Alan Feinerman
|Sam Olendorf
|06/12/2017
|-
|Andrew Wingate
|Todd Allen
|7/17/17
|-
|Stephen Foulkes
|[[user:mct|McTavish McArdle]]
|10/16/17
|-
|Charles Harmata
|[[user:mct|McTavish McArdle]]
|2017-10-23
|-
|Matthew DePree
|[[user:mct|McTavish McArdle]]
|2017-10-31
|-
|Szymon Mirek
|[[user:mct|McTavish McArdle]]
|2017-10-31
|-
|Arjun Sharma
|[[user:mct|McTavish McArdle]]
|2017-10-31
|-
|[[user:GalaxyCascade|Steve Griegoliet]]
|Sam ?
|2017-12-13
|-
|Jeff Gershune
|Sam
|2018-1-24
|-
|Matthew Maggio
|[[user:mct|McTavish McArdle]]
|2018-04-03
|-
|Wayne Hendryx
|[[user:mct|McTavish McArdle]]
|2018-04-09
|-
|Alisha Ciardi
|Jim Brink
|2018/05/08
|-
|David Earl
|Abel Greenwald
|2018/05/08
|-
|Sam Wallinga
|Sam
|2018/05/30
|-
|Maciej Warchalowski
|Sam Olendorf
|2018/06/13
|-
|Earl Wood
|Sam Olendorf
|6/13/2018
|-
|Dave Solomon
|Sam Olendorf
|7/11/2018
|-
|Ryan Treacy
|Sam Olendorf
|9/19/2018
|-
| Jacob Dawson
| Sam Olendorf
| 9/19/2018
|-
|Ben Dibuz
|[[user:mct|McTavish McArdle]]
|11/1/2018
|-
|Marcos Ruiz
|[[user:mct|McTavish McArdle]]
|2018-11-07
|-
|Jim Lund
|[[user:mct|McTavish McArdle]]
|2018-11-13
|-
|Tatjana Paunesku (tpaune)
|[[user:mct|McTavish McArdle]]
|11/27/18
|-
|Matthew Slizys
|[[User:CrazyUncleDave|Dave Solomon]]
| 11/18/18
|-
|Krystian Jasiak
|[[User:CrazyUncleDave|Dave Solomon]]
| 11/18/18
|-
|Michael Valdez
|[[User:CrazyUncleDave|Dave Solomon]]
| 11/18/18
|-
|Joe Mertz
|[[User:CrazyUncleDave|Dave Solomon]]
| 11/18/18
|-
|Daniel Gulick (dgulick)
|[[user:mct|McTavish McArdle]]
|12/12/18
|-
|John Zappa (jzappa)
|[[user:mct|McTavish McArdle]]
|11/27/18
|-
|Brandon Bay (bbay)
|[[user:mct|McTavish McArdle]]
|1/29/19
|-
|Oliver Sanchez(osanchez)
|[[user:mct|Dave Solomon]]
|12/18/18
|-
|Brian Barnt (bbarnt)
|Jim Brink
|02/09/2019
|-
|Will Spears
|Jim Brink
|02/??/2019
|-
|Charlie Kepner
|Jim Brink
|01/12/2019
|-
|Kevin Schwartzenberg (schwartz)
|[[user:mct|Dave Solomon]]
|11/27/18
|-
|Marco Rios
|[[user:mct|Dave Solomon]]
|03/12/2019
|-
|Jamin Nollsch (jaaamin)
|[[user:mct|McTavish McArdle]]
|2/17/2019
|-
|Kevin Cluff (cluffkd)
|[[user:mct|McTavish McArdle]]
|2/14/2019
|-
|Ella Gentz (ellagentz)
|Abel Greenwald
|03/19/2019
|-
|Mike Bart
|Abel Greenwald
|03/19/19
|-
|Stevan Dedovic (sdedovic)
|Abel Greenwald
|03/19/19
|-
|Greg Bell
|Jim Brink
|3/23/2019
|-
|Sky Nova
|Dave Solomon
|3/23/2019
|-
|Sean Blum
|Dave Dynatac
|3/27/2019
|-
|Charlie Melidosian
|[[user:mct|McTavish McArdle]]
|5/28/2019
|-
|[[User:morrand|Andrew Morris]]
|[[User:CrazyUncleDave|Dave Solomon]]
|5/28/2019
|-
|Paul Ocampo
|[[User:CrazyUncleDave|Dave Solomon]]
|5/28/2019
|-
|Adam Ringwood
|[[User:CrazyUncleDave|Dave Solomon]]
|5/31/2019
|-
|Bogdan Chernov
|[[User:CrazyUncleDave|Dave Solomon]]
|6/4/2019
|-
|Chen Chen
|[[User:CrazyUncleDave|McTavish McArdle]]
|6/6/2019
|-
|Tom Henderson
|[[user:mct|McTavish McArdle]]
| 5/28/19
|-
|Mariano Muñoz
|[[user:mct|McTavish McArdle]]
| 07/07/19
|-
|Michael Krueger
|[[user:mct|McTavish McArdle]]
| 07/07/19
|-
|-
|Michael Wilkin
|[[user:mct|McTavish McArdle]]
| 07/07/19
|-
|Charles Ware
|[[user:mct|McTavish McArdle]]
| 07/10/19
|-
|[[user:treiber|Mark Treiber]]
|[[user:mct|McTavish McArdle]]
| 07/10/19
|-
|[[user:dlariviere|D. Lariviere]]
|[[user:mct|McTavish McArdle]]
| 07/23/19
|-
|Patrick Cook
|[[user:mct|McTavish McArdle]]
|7/23/19
|-
|Matt Saunders
|[[user:mct|McTavish McArdle]]
|7/23/19
|-
|Ilya Deynega
|[[user:mct|McTavish McArdle]]
|7/23/19
|-
|[[user:wdhunt|Bill Hunt]]
|[[user:mct|McTavish McArdle]]
|8/13/19
|-
|Curt Williams
|[[user:mct|McTavish McArdle]]
|8/13/19
|-
|Joe Kardia
|[[User:CrazyUncleDave|Dave Solomon]]
|8/15/2019
|-
|Stephen Bouchard
|[[user:mct|McTavish McArdle]]
|8/20/19
|-
|Daylan Dufelmeier
|[[user:mct|McTavish McArdle]]
|8/20/19
|-
|Tim Bielawa
|[[user:mct|McTavish McArdle]]
|8/20/19
|-
|[[User:NewFatMike|Mike Thompson]]
|[[user:mct|McTavish McArdle]]
|08/27/19
|-
|Michael Baker
|[[user:mct|McTavish McArdle]]
|08/27/19
|-
|[[User:Robge|Rob German]]
|McTavish McArdle
|9/24/19
|-
|Alex Tillit
|McTavish McArdle
|9/24/19
|-
|Michael (Mike) Radziszewski
|McTavish McArdle
|9/24/19
|-
|Lavande Chou
|[[user:mct|McTavish McArdle]]
|10/08/19
|-
|Paul Lukas
|[[user:mct|McTavish McArdle]]
|10/08/19
|-
|[[user:mvictoras|Victor Mateevitsi]]
|[[user:mct|McTavish McArdle]]
|10/21/19
|-
|[[user:rchace|Raymond Chace]]
|[[User:CrazyUncleDave|Dave Soloman]]
|11/14/19
|-
|[[user:mventimiglia|Mark Ventimiglia]]
|[[user:CrazyUncleDave|Dave Solomon]]
|11/19/19
|-
|[[user:samphoton|Sam Cooler]]
|[[user:mct|McTavish McArdle]]
|11/23/19
|-
|Selden Paterson
|[[user:mct|McTavish McArdle]]
|11/05/19
|-
|Eric Byrne
|[[user:mct|McTavish McArdle]]
|1/21/20
|-
|William Flynn
|[[user:mct|McTavish McArdle]]
|02/04/2020
|-
|Michael Cox
|Ben Marshall
|01/23/2020
|-
|Luke Wilk
|[[user:mct|McTavish McArdle]]
|02/11/2020
|-
|Brent Myers
|Ben Marshall
|03/11/2020
|-
|[[User:sranjb2|Shayan Ranjbari]]
|[[user:CrazyUncleDave|Dave Solomon]]
|07/13/2020
|-
|Grant Wagner
|[[user:CrazyUncleDave|Dave Solomon]]
|08/15/2020
|-
|Ralph Brendler
|[[user:mct|McTavish McArdle]]
|2020-06-19
|-
|Phillip Jividen
|Abel Greenwald
|2020-09-20
|-
|[[User:Tcummings|Tom Cummings]]
|[[user:CrazyUncleDave|Dave Solomon]]
|09/21/2020
|-
|[[User:schultzy51|Ken Schultz]]
|[[user:mct|McTavish McArdle]]
|10/01/2020
|-
|[[User:Amethystdragon|Karl Schmidbauer]]
|[[user:mct|McTavish McArdle]]
|10/15/2020
|-

|Ellen Lustig
|[[user:mct|McTavish McArdle]]
|10/28/2020
|-
|David Milligan
|[[user:CrazyUncleDave|Dave Solomon]]
|11/28/2020
|-
|Ian Einhorn
|[[user:mct|McTavish McArdle]]
|01/19/2021
|-
|Mack Reed
|[[user:mct|McTavish McArdle]]
|02/11/2021
|-
|Eric Koop
|[[user:mct|McTavish McArdle]]
|04/06/2021
|-
|Scott Yoder
|[[user:mct|McTavish McArdle]]
|05/11/2021
|-
|Joel Broughton
|[[user:mct|McTavish McArdle]]
|06/08/2021
|-
|Richard Pless
|[[user:mct|McTavish McArdle]]
|07/13/2021
|-
|Scott Mueller
|[[user:mct|McTavish McArdle]]
|-
|Will Sumner
|[[user:mct|McTavish McArdle]]
|9/16/21
|-
|Sam Donahue
|[[user:mct|McTavish McArdle]]
|11/9/21
|-
|Vitaliy Volyanskyy
|[[user:mct|McTavish McArdle]]
|11/9/2021
|-
|Osi Van Dessel
|[[user:mct|McTavish McArdle]]
|12/13/2021
|-
|Davis Sayer
|[[user:mct|McTavish McArdle]]
|01/6/22
|-
|}