PS:1 Wiki Dev - User contributions [en]

Lincoln Electric 100 WeldPak

2015-09-03T14:14:05Z

Thisjosh:

{{Template:EquipmentPage
|owner=Dan Meyer
|model=Lincoln Electric 100 WeldPak AKA "MIG 1"
|serial=n/a|arrived=2009
|doesitwork=yes
|contact=Dan Meyer
|where=Welding Lab
|certification=yes
|hackable=no
|value=$500
|image=WeldPak100.jpg
}}
'''!!! CAUTION !!!''' Our welders are 20% duty cycle which means we can only be welding 2 minutes out of every 10 minutes or the welding unit may be ruined, if you weld for 2 minutes wait 8 minutes for the welder to cool. 
 
Welding Lens Shade 9 or 10 is the safe recommended welding lens.

OWNERS MANUAL: [[File:Lincoln_Electric_100.pdf]]
 
== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Jordan Bunker
|Self taught, Dan Meyer
|-
|Josh Kreuger
|Self Taught
|-
|Eric Michaud
|Self Taught
|-
|Todd Freeman
|Professional training
|-
|Tim Saylor
|Nat class
|-
|Nathan Witt
|Josh Kreuger
|-
|Brian Sutherland
|Tim Saylor
|-
|Karol Slowikowski
|[[User:kuroishi|David Koppel]]
|-
|Patrick Callahan
|Tim Saylor
|-
|Geoffrey Topham
|Eric Michaud
|-
|[[User:Meistertek|Dan Meyer]]
|Prairie State College: A.A.S. Manufacturing Technology 1993
|-
|Jeremy Bloyd-Peshkin
|3 years on the job
|-
|Kathy Whisler
|Dan Meyer
|-
|Shawn Blaszak
|Dan Meyer
|-
|Rick Futhark
|Dan Meyer
|-
|William McShane
|Dan Meyer
|-
|Jeff Cymbalski
|Dan Meyer
|-
|Joe Fallon
|Dan Meyer
|-
|Dan Locks
|Dan Meyer
|-
|Dustin Mitchell
|Dan Meyer
|-
|Christopher Lee Fanning
|Dan Meyer
|-
|Adam Davis
|Dan Meyer
|-
|Brian Chojnowski
|Dan Meyer
|-
|Sacha DeAngeli
|Dan Meyer
|-
|Steve Finkelman
|Dan Meyer
|-
|Keith Hoffmann
|Dan Meyer
|-
|Steve Farkas
|Dan Meyer
|-
|Gary Friedlander
|Dan Meyer
|-
|Jay Hopkins
|Dan Meyer
|-
|Mike Warot
|Dan Meyer
|-
|Rosanna Lloyd
|Dan Meyer
|-
|Colin Parsons
|Dan Meyer
|-
|Tucker Tomlinson
|Dan Meyer
|-
|Ryan Pierce
|Dan Meyer
|-
|Jessica Cobb
|Dan Meyer
|-
|Charlie Stauffer
|Dan Meyer
|-
|Michael Skilton
|Dan Meyer
|-
|William Ching
|Dan Meyer
|-
|Michael Skilton
|Dan Meyer
|-
|Brian Sheppard
|Dan Meyer
|-
|Kevin Caughlin
|Dan Meyer
|-
|Justin Bozarth
|Dan Meyer
|-
|Justin Miles
|Dan Meyer
|-
|Derek Bever
|Tucker Tomlinson
|-
|Shea Johns
|Derek Bever
|-
|Zachary Fietch
|Derek Bever
|-
|Dave Schact
|Mike Warot
|-
|Tom Forajter
|Dave Schact
|-
|Aaron Feigen
|Dave Schact
|-
|Michael Leinartas
|Dave Schact
|-
|Ray Doeksen
|Dave Schact
|-
|Eric Stein
|Dave Schact
|-
|Kris Huisinga
|Dave Schact
|-
|Elizabeth Koprucki
|Dave Schact
|-
|Darin Wike
|Adrianna McKinley
|-
|Tina Croniser
|Dave Schact
|-
|[[User:Scyg|Simon Cygielski]]
|Dave Schact
|-
|Robert Grossman
|Derek Bever
|-
|Adam Glick
|Derek Bever
|-
|Eric K.
|Dave Schact
|-
|Eddie Muela
|Derek Bever
|-
|Samuel Swope
|Derek Bever
|-
|Casey Olson
|Dave Schact
|-
|Jim Grady
|Dave Schact
|-
|[[User:Amishhammer|Tom Judge]]
|Dave Schact
|-
|[[User:Negativek|Everett Wilson]]
|Tom Judge
|-
|Jason Shanfield
|Dave Schact
|-
|[[User:kuroishi|David Koppel]]
|Tom Judge
|-
|Thomas Wright
|Tom Judge
|-
|Chris Agocs
|Tom Judge
|-
|Anna Yu
|Tom Judge
|-
|Bryan Gleason
|Tom Judge
|-
|Michael Leinartas
|Dave Schact
|-
|Sonia Yaco
|Tom Judge
|-
|Arjun Wadnerkar
|Tom Judge
|-
|David Srebro
|Ron Olson
|-
|Glenn Powers
|Ron Olson
|-
|Chris Kleehammer
|Ron Olson
|-
|Will Garza
|Ron Olson
|-
|Allen Zalsman
|Simon Cygielski
|-
|Scott Anamizu
|Simon Cygielski
|-
|Touly Phiachantharath
|Ron Olson
|-
|-
|Brian Marler
|Ron Olson
|-
|James Villalpando
|Ron Olson
|-
|Jeff Lawson
|Ron Olson
|-
|James Villalpando
|Ron Olson
|-
|Eric Reusche
|Ron Olson
|-
|Raj Perera
|Ron Olson
|-
|Josh Cooper
|Ron Olson
|-}
{{Template:Training|links=
 [http://en.wikipedia.org/wiki/Flux-cored_arc_welding Flux-cored arc welding]
 [http://en.wikipedia.org/wiki/Gas_metal_arc_welding Gas metal arc welding]
 [http://youtu.be/kI7GOVrB33c Flux Cored Welding Basics]
 [http://www.weldingtipsandtricks.com/lincoln-mig-welder.html Welding Tips and Tricks for Lincoln Mig and Flux Core Welders]
 [http://www.weldingtipsandtricks.com/mig-welding-tips-articles.html 20 Best Mig Tips]
 [http://youtu.be/DEDHR-Nst6E MIG Welding Basics for Farm and Automotive Repairs]
 [http://www.lincolnelectric.com/en-us/equipment/retail-products/pages/product=k2513-1.aspx WELD-PAK® 125HD 120/1/60 Information]
 [http://www.lincolnelectric.com/assets/servicenavigator-public/lincoln3/imt891.pdf WELD-PAK® 125HD Manual]
 [http://www.lincolnelectric.com/en-us/education-center/welding-safety/Pages/welding-safety.aspx Arc Welding Safety]
 [http://www.weldingtipsandtricks.com/welding-safety.html Welding Safety Tips AKA how not to kill your ass!]
 [http://youtu.be/nqVxqp9sqio Intro Portable POWER MIG® Family]
 [http://youtu.be/Zsbd2tHib5g POWER MIG® Quick Start, Pt 1]
 [http://youtu.be/QI-G_0kC0ZY POWER MIG® Quick Start, Pt 2]
}}

== Suggested Personal Equipment and Supplies ==
{| class="wikitable" border="1"
! Item
! Description
! Supplier
! Cost
|-
|KH643
|Lincoln Electric Premium Leather Welding Gloves
|Home Depot
|$14.47
|-
|KH643
|Alternative to above, MIG Welding Glove Grain Pigskin, 4" Gauntlet Cuff, Gold
|McMaster
|$12.69
|-
|19056
|Nice affordable auto darkening helmet, Northern Industrial 3 13/16 x 1 3/4 in. Welding Helmet with variable shade #9-13
|http://www.northerntool.com
|$64.99
|-
|KH530
|Lincoln Electric Straight-Head Chipping Hammer
|Home Depot
|$5.97
|-
|KH585
|Lincoln Electric Wooden Shoe Handle Carbon Steel Brush
|Home Depot
|$2.47
|-
|5367T9
|Lightweight Cotton Welding Clothing Jacket, 30" Length
|McMaster
|$23.00
|-
|5340T61
|Alternative to above jacket for cooler welding, Leather Cape Sleeves, 13" Length
|McMaster
|$46.51
|-
|5340T41
|Goes with Cape Sleeves above, Cape-Sleeve Bib, 19" Length
|McMaster
|$13.81
|-
|5263T45
|If you are going to be doing a ton of welding, Heavy Duty Leather Welding Clothing Chaps
|McMaster
|$42.56
|-
|ED030584
|Lincoln Electric Innershield 0.035 in. NR211 Flux-Cored Welding Wire 1 lb.
|Home Depot
|$10.97
|-
|7678A674
|Alternative to above, MIG Welding Wire E71T-GS Flux Core Steel, .035" Dia, 2 lb Spool
|McMaster
|$16.67
|-
|KH726
|Lincoln Electric Flux-Cored Welding Nozzle
|Home Depot
|$3.97
|-
|KH712
|Lincoln Electric 7/200 in. Wire Feed Welder Contact Tip 035” (0.9 mm) Contact Tips (Qty. 3)
|Home Depot
|$8.97
|-
|78375A608
|Alternative to above, Tweco #11-35 Contact Tip, .035" Wire Size, packs of 10
|McMaster
|$6.00
|-
|6511K29
|Stock for practice, Low Carbon Steel Round Edge Rectangular Bar 1/16" Thick, 1-1/2" Wide, 6' Length
|McMaster
|$15.53
|-
|'''Upgrades for our welders'''
|Some of these items have been added to our welders
|
|
|-
||K2526-1
|To add gas shielding and MIG (GMAW) capability including welding aluminum: Lincoln Electric MIG Conversion Kit with 1/4 in. Regulator with Gauge
|Home Depot
|$121.00
|-
|K2532-1
|Magnum 100SG spool gun, air-cooled for welding aluminum
|Airgas Mid America
|$200
|-
|Various
|Argon (for aluminum)and Agrgon/CO2 blend (for steel) gasses, $170 for cylinder, $30-40 for gas
|Airgas Mid America
|$210
|-
|KH495
|Small canvas cover for welders
|Airgas Mid America
|$25
|-
|}

[[Category:Hot Shop Equipment]]
[[Category:Fabrication]]
[[Category:Metalworking]]
[[Category:Certification Clarification Needed]]

Tier 1 Cold Metals Authorization

2015-09-03T14:06:25Z

Thisjosh:

In the cold metals area we have grouped together authorizations on the non-precision cutting tools into a single authorization called "Tier 1". ''The handout (the "script") we use is at [[Cold Metals Tier 1]]''. The [[DoAll Drill Press]], [[Bench Grinder (6in)]], [[Sears Belt Sander|Belt Sander]], [[Johnson Bandsaw]], [[DoAll Bandsaw]] are under a Tier 1 authorization process. The session covers basic operation and safety on the machines.

Monitor the mailing list for times and dates.

== Tools Requiring Tier 1 ==

[[Clausing Lathe|Clausing metal lathe]]

[[Bridgeport Knee Mill|Bridgeport milling machine]]

== Cold Metals Tier 1 Authorizers ==

Tier 1 certification can currently be done by the following people:

{| class="wikitable" border="1"
! Tier 1 Authorizers
|-
|Ed Bennett
|-
|Anna Yu
|-
|Tucker Tomlinson
|-
|Thomas Wright
|-
|Todd Allen
|-
|Everett Wilson
|}

=== How to become a Authorizer ===

We want as many people available to do Tier 1 authorizations as we can get.
The idea is to promote safety, and get people used to the sounds that a machine tool cutting well makes.
New authorizers get authorized to authorize others by (1) having some
amount of presence in the shop and (2) closely following the "script"
during EITHER a "dry-run" authorizing session given to an authorized
authorizer -- or conducting a real-live authorizing session while being
observed by an authorized authorizer. During such a session, the
observing authorizer should _not_ have to speak. Obviously if the new
authorizer-to-be has _significant_ problems in communication of the
content of the "script", the observing authorizer will contribute to the
discussion. For the new authorizer-to-be it's a test, not an opportunity
for team-teaching.

==== Tier 1 Cold Metals Areas Convention of Authorization ====

[[Cold Metals Tier 1]]

== People who are Tier 1 Authorized for Cold Metals Area ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
!Date Trained
|-
|Adam Glick
|Ed Bennett
|
|-
|Jeffrey Camealy
|Ed Bennett
|
|-
|Tina Croniser
|Ed Bennett
|
|-
|Sevin Straus
|Ed Bennett
|
|-
|Vladamir Riazanski
|Ed Bennett
|
|-
|James Porter
|Ed Bennett
|
|-
|Greg Teiber
|Ed Bennett
|
|-
|Everett Wilson
|Ed Bennett
|
|-
|Derek Bever
|Ed Bennett
|
|-
|Jay Hopkins
|Ed Bennett
|
|-
|James Porter
|Ed Bennett
|
|-
|Eric Stein
|Tucker Tomlnson
|
|-
|Todd Allen
|Ed Bennett
|
|-
|Mac MacDevitt
|Ed Bennett
|
|-
|[[User:scyg|Simon Cygielski]]
|Ed Bennett
|
|-
|Robb Rigs
|Ed Bennett
|
|-
|Arturo Duarte
|Ed Bennett
|
|-
|Michael Skilton
|Tucker Tomlinson
|
|-
|[[User:Justin|Justin T. Conroy]]
|Ed Bennett
|
|-
|[[User:davidfell|David Fell]]
|Ed Bennett
|
|-
|[[User:rdoeksen|Ray Doeksen]]
|Ed Bennett
|
|-
|Ryan Pierce
|Ed Bennett
|
|-
|Elizabeth Koprucki
|Ed Bennett
|
|-
|Casey Olson
|Ed Bennett
|
|-
|Ron Olson
|Ed Bennett
|
|-
|Thomas Wright
|Ed Bennett
|
|-
|Tom Judge
|Tucker Tomlinson
|
|-
|Edward Muela
|Anna Yu
|5/13/14
|-
|Samuel Swope
|Anna Yu
|5/13/14
|-
|Chris Agocs
|Anna Yu
|6/3/14
|-
|Justine Miles
|Anna Yu
|6/3/14
|-
|Robert Grossman
|Ed Bennett
|
|-
|Tom Forajter
|Thomas Wright
|
|-
|[[User:ahbaker|Alan Baker]]
|Tucker Tomlinson
|
|-
|Jeff McBride
|Ed Bennett
|10/9/14
|-
|Mike Kislovsky
|Ed Bennett
|10/9/14
|-
|Arjun Wadnerkar
|Ed Bennett
|10/9/14
|-
|Oscar Villareal
|Ed Bennett
|10/9/14
|-
|TomF (? 7-17)
|Thomas Wright
|
|-
|Rich Smith
|Thomas Wright
|
|-
|George Shaw
|Thomas Wright
|
|-
|Ron Bean
|Ed Bennett
|
|-
|John Butera
|Ed Bennett
|10/18/14
|-
|Alex Schaffer
|Ed Bennett
|10/18/14
|-
|Daniel Loeser
|Ed Bennett
|10/18/14
|-
|Jonathan Bisson
|Ed Bennett
|10/18/14
|-
|Kyle Bieneman
|Todd Allen
|11/09/14
|-
|Scott Little
|Todd Allen
|11/09/14
|-
|RJ Metzger
|Todd Allen
|11/09/14
|-
|Giovanni Arroyo
|Todd Allen
|11/09/14
|-
|Joao Santos
|Todd Allen
|11/26/14
|-
|Nicholas Haldereman
|Todd Allen
|11/26/14
|-
|Doorman Dave
|Todd Allen
|11/26/14
|-
|Stephen Ioannou
|Todd Allen
|11/26/14
|-
|Lucas Goossen
|Todd Allen
|12/10/14
|-
|[[user:RogerMoore|Roger Moore]]
|Todd Allen
|12/10/14
|-
|[[User:Mwilkens|Matt Wilkens]]
|Todd Allen
|12/10/14
|-
|Rhonda Jackson
|Todd Allen
|12/10/14
|-
|Matt Meshulam
|Todd Allen
|12/21/14
|-
|Kevin Pulver
|Todd Allen
|12/21/14
|-
|Andrew Camardella
|Todd Allen
|12/21/14
|-
|Mike Coriale
|Todd Allen
|12/21/14
|-
|Nick Naro
|Todd Allen
|1/11/15
|-
|John Farmer
|Todd Allen
|1/11/15
|-
|[[user:Jaypee|Jay Pee]]
|Todd Allen
|1/11/15
|-
|Sam Paris
|Todd Allen
|1/21/2015
|-
|Jake Rush
|Todd Allen
|1/21/2015
|-
|Carolyn Ignacio
|Todd Allen
|1/21/2015
|-
|Andrew Sowa
|Todd Allen
|1/21/2015
|-
|Hilary Lee
|Todd Allen
|1/21/2015
|-
|Eric Slehofer
|Todd Allen
|1/28/2015
|-
|Sam Reicks
|Todd Allen
|1/28/2015
|-
|Tyler Matthew
|Todd Allen
|1/28/2015
|-
|Ben Bogler
|Todd Allen
|1/28/2015
|-
|Brittany Krawczyk
|Todd Allen
|1/28/2015
|-
|Cary Lahucik
|Todd Allen
|1/28/2015
|-
|Eric Yu
|Todd Allen
|2/8/2015
|-
|Davis Mazariegos
|Todd Allen
|2/8/2015
|-
|Dan Baltudis
|Todd Allen
|2/8/2015
|-
|Shae Kurko
|Todd Allen
|2/25/2015
|-
|Curtiss Cooke
|Todd Allen
|02/08/15
|-
|Ryan Taylor
|Everett Wilson
|03/04/15
|-
|Joe Wallace
|Todd Allen
|03/08/15
|-
|Josh Myers
|Todd Allen
|03/08/15
|-
|[[User:glenn|Glenn Powers]]
|Todd Allen
|03/08/15
|-
|Daniel Sojka
|Todd Allen
|03/25/2015
|-
|Michael Patton
|Todd Allen
|03/25/2015
|-
|Kevin M Sampson
|Todd Allen
|07/22/2015
|-
|Steve Farkas
|Everett Wilson

|-
|Josh Cooper
|Todd Allen
|09/30/2015

Shopbot PRS CNC router

2014-09-12T06:13:24Z

Thisjosh:

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = yes
|hackable = no
|model = Shopbot PRS
|arrived = 2014
|doesitwork = Not Yet
|contact = Elizabeth, Bart
|where = TBD
|value = $16000
}}

== Documentation ==

[[File:Shopbotassembly.pdf]]

[[File:Squaringshopbot.pdf|Squaring the ShopBot]]

[[File:Programming_handbook.pdf]]

[http://www.shopbottools.com/ShopBotDocs/files/quick%20start%20guide%202013%2007%2023.pdf QuickStart]

== Authorization Checklist ==

This is here as a checklist for proctors to follow when authorizing people. It can also help remind you of things after you are authorized. Just reading this does not authorizing you.

* How to get authorized
** Watch [https://groups.google.com/forum/#!forum/pumping-station-one the forum] for announcements or ask on that forum if no announcements have been made for a few weeks.

* Authorization group size
** About 4 (each person will run a job)

* Safety
** Safety Glasses
** Hearing Protection
** Dust Protection

* What can go wrong (and what to do)

* How does machine work
** Axes
** Motors
** Spindle

* Daily Maintenance
** Spindle bearing warm up.
*** The "C5" warm up routine should be run on the first job of the day. It runs the spindle at 3 speeds for 3 minutes each to warm up the bearings. (When it doubt, warm it up)

* Extended Maintenance
** Grease the racks
** Use Grease type: TBD

* Machine Control
** Turn on sequence
*** Log into computer
*** Turn on Shopbot big red and yellow twist switch (see zeroing below)
*** Insert Key and turn to "engaged" position.
*** The VDF should light up, the spindle fan should be on.
*** Start "Shopbot 3" program.
*** Open Tools...Spindle RPM Control menu (to allow RPM control)
**** Make sure collet is tightened or no tool or nut is installed
**** Run the C5 warm up routine
** Jogging
*** Keypad
*** Arrow Keys + Page Up, Page Down(ctrl for fast jog)

* CAM Software
** Vectric V Carve
** Just the basics...separate class for advanced V Carve.
** On line videos

* Running your Job
** Zeroing X & Y
*** With machine off slow push gantry towards X0 until it hits hard stops (optional)
*** Turn on big red switch while still holding gantry.
*** Jog machine away from X0 Y0 so machine will find switches
*** Click X, Y zero button.
** Zeroing Z (top of work piece)
*** Jog over your work piece
*** Place Z zero plate on work piece under the bit
*** Place clip on bit
*** Test connection by touching plate to bit and watch for light #1 to light
*** Click the Z 0 button (it will touch off twice!!!)

* Waste Board and clamping

* Collets, Bits, Feeds and Speeds
** Collets
*** We currently have collets for 1/2, 1/4, 3/16 and 1/8" shank bits.
*** Try to keep them clean and store them away from dust between uses. Dust between the gaps will produce runout.
** Bits
*** Use bits designed for the material you are cutting. Don't just steal a bits from the Bridgeport. They won't do a good job and will probably overheat.
*** For cutting out things, use the smallest appropriate bit. Using a 1/2" bit to cutout will just create a lot of mess.

* ShopBot should not be used for...
** Metals other than aluminum
** Cutting anything that requires coolant or lubricant (it will wreck the waste board)
** Ripping lumber (use the table saw)
** Thickness Planning (Use the planner if you can)
** Drilling holes with drill bits (a small end mill works better)

* How to leave the machine (be excellent)
** Machine
*** Home the machine to X0, Y0
*** Turn off both switches
*** Remove Key
*** Remove bit and collet.
*** Place both collet wrenches on top of electronics box
*** clean up work area
*** Smooth out waste board if you puckered it at all.

** Post a picture please :-)

== Pre-Flight Checklist ==
* Did you home the machine?
* Is the dust collect gate open?
* Are you sure you have the right X, Y orientation for your file and material?
* Did you set the proper X,Y zero for your work piece on the Shopbot.
* Is the correct bit installed and tight?
* Is the key in and turned on?
* Is the dust skirt set right so it does not get smashed.
* Is Z zero set to the work top?
* Is the touch plate and clip returned.
* Is the material properly secured
* Safety glasses, hearing protection on.
* Start the job with the E-Stop ready to hit.
* Turn on dust collector ( I like to wait so I can hear that things sound right on the shopbot before turning on the collector)

== Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Elizabeth Koprucki
|Danger Committee
|-
|Bart Dring
|Danger Committee
|-
|Ryan Pierce
|Danger Committee
|-
|Nathan Ellis
|Danger Committee
|-
|Michael Skilton
|Danger Committee
|-
|Arturo Duarte
|Bart
|-
|Derek Bever
|Bart
|-
|Everett
|Bart
|-
|Vincent Colombo
|Bart
|-
|[[User:justin|Justin T. Conroy]]
|Bart
|-
|Hugh Sato
|Bart
|-
|Sergey Nekrasov
|Bart
|-
|Valerie Moore
|Bart
|-
|Patrick Schless
|Bart
|-
|Tom Forajter
|Bart
|-
|Todd Allen
|Michael Skilton
|-
|Roger Moore
|Bart
|-
|Tim Saylor
|Bart
|-
|Hef
|Bart
|-
|Jeff McBride
|Bart
|-
| Maxwell ?
| Michael Skilton
|-
|Samuel Swope
|Michael Skilton
|-
| Khoi Nguyen
|Michael Skilton
|-
|Brian Chojnowski
|Michael Skilton
|-
|Josh Cooper
|Bart
|-
|...
|...
|-
|...
|...
|-
|...
|...
|-
|...
|...
|-
|...
|...
|-
|...
|...
|}

[[Category:Fabrication]]
[[Category:CNC]]

Large Format CNC Router Proposal

2014-03-21T12:32:14Z

Thisjosh: /* Language */

== Sponsor ==

== History ==
* 2014-02-25 - discussion open on member list
* 2014-03-20 - open meeting held at PS1 to discuss the purchase

== Background ==

We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

* For the purposes of this authorization, the CNC router and associated accesories should be substantially similar to the description here:
** A CNC router with capacity similar to a PRSstandard, with a work area of aproximately 4' x 8' x 6".
** A dust collector, a computer capable of running the CNC router, and a high frequency spindle of at least 2HP

== Language ==

We the membership of Pumping Station: One add a CNC router and associated accessories to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes, the board of Pumping Station One will be authorized to expend up to but not exceeding $22,750 to directly purchase a CNC router with associated accessories, and, if necessary, to run a power line supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire when this purchase is made or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within one month of the purchase date.

== Footnotes ==

Large Format CNC Router Proposal

2014-03-21T12:31:34Z

Thisjosh: /* Background */

Large Format CNC Router Proposal

2014-03-21T12:30:58Z

Thisjosh: /* Language */

== Sponsor ==

== History ==
* 2014-02-25 - discussion open on member list
* 2014-03-20 - open meeting held at PS1 to discuss the purchase

== Background ==

We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

* For the purposes of this authorization, the CNC router and associated accesories should be substantially similar to the description here:
** A CNC router with capacity similar to a PRSstandard, with a work area of aproximately 4' x 8' x 6".
** A dust collector, a computer capable of running the CNC router, a high frequency spindle of at least 2HP, and initial tooling for training/authorization purposes

== Language ==

We the membership of Pumping Station: One add a CNC router and associated accessories to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes, the board of Pumping Station One will be authorized to expend up to but not exceeding $22,750 to directly purchase a CNC router with associated accessories, and, if necessary, to run a power line supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire when this purchase is made or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within 1 month of the purchase date.

== Footnotes ==

Large Format CNC Router Proposal

2014-03-21T12:28:30Z

Thisjosh: /* History */

== Sponsor ==

== History ==
* 2014-02-25 - discussion open on member list
* 2014-03-20 - open meeting held at PS1 to discuss the purchase

== Background ==

We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

* For the purposes of this authorization, the CNC router and associated accesories should be substantially similar to the description here:
** A CNC router with capacity similar to a PRSstandard, with a work area of aproximately 4' x 8' x 6".
** A dust collector, a computer capable of running the CNC router, a high frequency spindle of at least 2HP, and initial tooling for training/authorization purposes

== Language ==

We the membership of Pumping Station: One add a CNC router and associated accessories to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes, the board of Pumping Station One will be authorized to expend up to but not exceeding $X to directly purchase a CNC router with associated accesories, and, if necessary, to run a powerline supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire when this purchase is made or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within 1 month of the purchase date.

== Footnotes ==

Large Format CNC Router Proposal

2014-03-14T21:08:15Z

Thisjosh: /* Language */

==Sponsor==

== History ==
* 2014-02-25 - discussion open on member list

== Background ==

We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

* For the purposes of this authorization, the CNC router and associated accesories should be substantially similar to the description here:
** A CNC router with capacity similar to a PRSstandard, with a work area of aproximately 4' x 8' x 6".
** A dust collector, a computer capable of running the CNC router, a high frequency spindle of at least 2HP, and initial tooling for training/authorization purposes

== Language ==

We the membership of Pumping Station: One add a CNC router and associated accessories to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes, the board of Pumping Station One will be authorized to expend up to but not exceeding $X to directly purchase a CNC router with associated accesories, and, if necessary, to run a powerline supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire when this purchase is made or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within 1 month of the purchase date.

== Footnotes ==

Large Format CNC Router Proposal

2014-03-14T03:17:18Z

Thisjosh: /* Footnotes */

===Sponsor===

===History===
2/25/14 - discussion open on member list

===Goal===
We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

===Language===

We the membership of Pumping Station: One add a CNC router and associated accessories(1) to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes, the board of Pumping Station One will be authorized to expend up to but not exceeding $X to directly purchase a CNC router with associated accesories, and, if necessary, to run a powerline supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire when this purchase is made or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within 1 month of the purchase date.

===Footnotes===

1) For the purposes of this authorization, the CNC router and associated accesories should be substantially similar to the description here:
* A CNC router with capacity similar to a PRSstandard, with a work area of aproximately 4' x 8' x 6".
* A dust collector, a computer capable of running the CNC router, a high frequency spindle of at least 2HP, and initial tooling for training/authorization purposes

Large Format CNC Router Proposal

2014-03-14T03:02:21Z

Thisjosh: /* Footnotes */

===Sponsor===

===History===
2/25/14 - discussion open on member list

===Goal===
We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

===Language===

We the membership of Pumping Station: One add a CNC router and associated accessories(1) to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes, the board of Pumping Station One will be authorized to expend up to but not exceeding $X to directly purchase a CNC router with associated accesories, and, if necessary, to run a powerline supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire when this purchase is made or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within 1 month of the purchase date.

===Footnotes===

1) For the purposes of this authorization, the CNC and associated accesories should be substantially similar to the description here:
* A CNC router with capacity similar to a PRSstandard, with a work area of aproximately 4' x 8' x 6".
* A dust collector, a computer capable of running the CNC router, a high frequency spindle of at least 2HP, and initial tooling for training/authorization purposes

Large Format CNC Router Proposal

2014-03-14T03:01:54Z

Thisjosh: /* Footnotes */

===Sponsor===

===History===
2/25/14 - discussion open on member list

===Goal===
We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

===Language===

We the membership of Pumping Station: One add a CNC router and associated accessories(1) to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes, the board of Pumping Station One will be authorized to expend up to but not exceeding $X to directly purchase a CNC router with associated accesories, and, if necessary, to run a powerline supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire when this purchase is made or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within 1 month of the purchase date.

===Footnotes===

1) For the purposes of this authorization, the CNC and associated accesories should be substantially similar to the description here:
* A CNC router with capacity similar to a PRSstandard, with a work area of aproximately 4' x 8' x 6".
* A dust collector, computer capable of running the CNC router, high frequency spindle of at least 2HP, and initial tooling for training/authorization purposes

Large Format CNC Router Proposal

2014-03-14T02:59:46Z

Thisjosh: /* Footnotes */

===Sponsor===

===History===
2/25/14 - discussion open on member list

===Goal===
We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

===Language===

We the membership of Pumping Station: One add a CNC router and associated accessories(1) to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes, the board of Pumping Station One will be authorized to expend up to but not exceeding $X to directly purchase a CNC router with associated accesories, and, if necessary, to run a powerline supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire when this purchase is made or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within 1 month of the purchase date.

===Footnotes===

1) For the purposes of this authorization, the CNC and associated accesories should be substantially similar to the description here:
* A CNC router with capacity similar to a PRSstandard, with a work area of aproximately 4' x 8' x 6".
* A dust collector, computer capable of running the CNC router, and a high frequency spindle of at least 2HP

Large Format CNC Router Proposal

2014-03-14T02:58:03Z

Thisjosh: /* Language */

===Sponsor===

===History===
2/25/14 - discussion open on member list

===Goal===
We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

===Language===

We the membership of Pumping Station: One add a CNC router and associated accessories(1) to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes, the board of Pumping Station One will be authorized to expend up to but not exceeding $X to directly purchase a CNC router with associated accesories, and, if necessary, to run a powerline supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire when this purchase is made or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within 1 month of the purchase date.

===Footnotes===

1) For the purposes of this authorization, the CNC and associated accesories should be substantially similar to the description here:
* A CNC router with capacity similar to a PRSstandard.
* This CNC router should have a work area of aproximately 4' x 8' x 6".
* The purchase will include a dust collector, a computer capable of running the CNC router, and a high frequency spindle of at least 2HP

Large Format CNC Router Proposal

2014-03-14T02:56:50Z

Thisjosh:

===Sponsor===

===History===
2/25/14 - discussion open on member list

===Goal===
We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

===Language===

We the membership of Pumping Station: One add a CNC router and associated accessories(1) to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes, the board of Pumping Station One will be authorized to expend up to but not exceeding $X to directly purchase a CNC router with associated accesories, and, if necessary, to run a powerline supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire upon purchase of the machine or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within 1 month of the purchase date.

===Footnotes===

1) For the purposes of this authorization, the CNC and associated accesories should be substantially similar to the description here:
* A CNC router with capacity similar to a PRSstandard.
* This CNC router should have a work area of aproximately 4' x 8' x 6".
* The purchase will include a dust collector, a computer capable of running the CNC router, and a high frequency spindle of at least 2HP

Large Format CNC Router Proposal

2014-03-14T02:56:41Z

Thisjosh:

===Sponsor===

===History===
2/25/14 - discussion open on member list

===Goal===
We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

===Language===

We the membership of Pumping Station: One add a CNC router and associated accesories(1) to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes, the board of Pumping Station One will be authorized to expend up to but not exceeding $X to directly purchase a CNC router with associated accesories, and, if necessary, to run a powerline supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire upon purchase of the machine or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within 1 month of the purchase date.

===Footnotes===

1) For the purposes of this authorization, the CNC and associated accesories should be substantially similar to the description here:
* A CNC router with capacity similar to a PRSstandard.
* This CNC router should have a work area of aproximately 4' x 8' x 6".
* The purchase will include a dust collector, a computer capable of running the CNC router, and a high frequency spindle of at least 2HP

Large Format CNC Router Proposal

2014-03-14T02:56:04Z

Thisjosh:

===Sponsor===

===History===
2/25/14 - discussion open on member list

===Goal===
We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

===Language===

We the membership of Pumping Station: One add a CNC router and associated costs(1) to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes, the board of Pumping Station One will be authorized to expend up to but not exceeding $X to directly purchase a CNC router with associated accesories, and, if necessary, to run a powerline supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire upon purchase of the machine or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within 1 month of the purchase date.

===Footnotes===

1) For the purposes of this authorization, the CNC and associated accesories should be substantially similar to the description here:
* A CNC router with capacity similar to a PRSstandard.
* This CNC router should have a work area of aproximately 4' x 8' x 6".
* The purchase will include a dust collector, a computer capable of running the CNC router, and a high frequency spindle of at least 2HP

Large Format CNC Router Proposal

2014-03-14T02:54:24Z

Thisjosh:

===Sponsor===

===History===
2/25/14 - discussion open on member list

===Goal===
We would like to see a large format CNC router capable of basic and advanced work brought into PS1.

===Language===

We the membership of Pumping Station: One add a CNC router and associated costs(1) to the list of discretionary capital expenditures in the Pumping Station One budget. If this vote passes the board of Pumping Station One will be authorized to expend up to but not exceeding $X to directly purchase a CNC router with associated accesories, and, if necessary, to run a powerline supplying the correct voltage/current to the machine. This amount shall include the costs of shipping the purchase to Pumping Station One. This spending authority will expire upon purchase of the machine or at the time a new budget is passed, whichever occurs first. Upon completion of this purchase a full account of the monies spent and equipment purchased will be presented by the Treasurer of Pumping Station One to the membership via the mailing list within 1 month of the purchase date.

===Footnotes===

1) For the purposes of this authorization, the CNC and associated accesories should be substantially similar to the description here:
* A CNC router with capacity similar to a PRSstandard.
* This CNC router should have a work area of aproximately 4' x 8' x 6".
* The purchase will include a dust collector, a computer capable of running the CNC router, and a high frequency spindle of at least 2HP

CNC 3020 Router

2014-02-28T03:36:51Z

Thisjosh: /* Certified Users */

[[Category:Fabrication]]

{{Template:EquipmentPage
|owner = ?
|serial = ?
|certification = yes
|hackable = no
|model = ?
|arrived = ?
|doesitwork = yes
|contact = Elizabeth
|where = [[CNC]] table in the shop
|value = ?
|image = CNC3020.jpg
}}

== Documentation ==

== Certified Users ==
{| class="wikitable" border="1"
! qualified member
! trained by
|-
| Bart
| Himself as he got it working
|-
|Ryan Pierce
|Bart Dring
|-
|Ron Bean
|Bart Dring
|-
|Josh Cooper
|Bart Dring
|-
|Arturo Duarte
|Bart Dring
|-
|Elizabeth Koprucki
|Bart Dring
|-}

Large Format CNC Router Proposal

2014-02-27T12:20:30Z

Thisjosh: /* Options */

== Sponsor ==

Joshua Cooper - starving hacker: in search of a voting member to submit this proposal.

== History ==

2/25/14 - Planning

== Background ==

A large format CNC router (4' x 4' or 4' x 8') would be a great benefit to the space.

== Options ==

* [http://www.shopbottools.com/mProducts/prsstandard.htm ShopBot PRSstandard CNC]
** price: $11,495 to $14,495
* [http://www.zenbotcnc.com/all-products/zenbot-4848 Zenbot 4848]
** price: $2,547.00 (spindle motor + software)
* [http://www.automationtechnologiesinc.com/products-page/cnc-router/kl-1212-cnc-router-48-x-48-x-6-0-run-at-220vac-with-vacumm-table Automation Technology KL-1212 CNC Router (with vacuum bed to hold pocketed pieces down)]
** price: $5,999
* [http://www.camaster.com/product/stinger-ii/ CAMaster Stinger II]
** price: $12,495, equipped with everything (hardware/software including its own dedicated PC)

== Language ==

Authorize the board to spend up to $X (total) on materials stated above, and directly related costs, such as replacement router bit, software, a computer with a parallel port, and delivery costs.

Large Format CNC Router Proposal

2014-02-27T12:12:46Z

Thisjosh: /* Options */

== Sponsor ==

Joshua Cooper - starving hacker: in search of a voting member to submit this proposal.

== History ==

2/25/14 - Planning

== Background ==

A large format CNC router (4' x 4' or 4' x 8') would be a great benefit to the space.

== Options ==

* [http://www.shopbottools.com/mProducts/prsstandard.htm ShopBot PRSstandard CNC]
** price: $11,495 to $14,495
* [http://www.zenbotcnc.com/all-products/zenbot-4848 Zenbot 4848]
** price: $2,547.00 (spindle motor + software)
* [http://www.automationtechnologiesinc.com/products-page/cnc-router/kl-1212-cnc-router-48-x-48-x-6-0-run-at-220vac-with-vacumm-table Automation Technology KL-1212 CNC Router (with vacuum bed to hold pocketed pieces down)]
** price: $5,999
* [http://www.camaster.com/product/stinger-ii/ CAMMaster Stinger II]
** price: $12,495, equipped with everything (hardware/software including its own dedicated PC)

== Language ==

Authorize the board to spend up to $X (total) on materials stated above, and directly related costs, such as replacement router bit, software, a computer with a parallel port, and delivery costs.

Large Format CNC Router Proposal

2014-02-26T15:19:40Z

Thisjosh: /* Options */

== Sponsor ==

Joshua Cooper - starving hacker: in search of a voting member to submit this proposal.

== History ==

2/25/14 - Planning

== Background ==

A large format CNC router (4' x 4' or 4' x 8') would be a great benefit to the space.

== Options ==

* [http://www.shopbottools.com/mProducts/prsstandard.htm ShopBot PRSstandard CNC]
** price: $11,495 to $14,495
* [http://www.zenbotcnc.com/all-products/zenbot-4848 Zenbot 4848]
** price: $2,547.00 (spindle motor + software)
* [http://www.automationtechnologiesinc.com/products-page/cnc-router/kl-1212-cnc-router-48-x-48-x-6-0-run-at-220vac-with-vacumm-table Automation Technology KL-1212 CNC Router (with vacuum bed to hold pocketed pieces down)]
** price: $5,999

== Language ==

Authorize the board to spend up to $X (total) on materials stated above, and directly related costs, such as replacement router bit, software, a computer with a parallel port, and delivery costs.

Large Format CNC Router Proposal

2014-02-26T03:29:40Z

Thisjosh: /* History */

== Sponsor ==

Joshua Cooper - starving hacker: in search of a voting member to submit this proposal.

== History ==

2/25/14 - Planning

== Background ==

A large format CNC router (4' x 4' or 4' x 8') would be a great benefit to the space.

== Language ==

Authorize the board to spend up to $X (total) on materials stated above, and directly related costs, such as replacement router bit, software, a computer with a parallel port, and delivery costs.

Large Format CNC Router Proposal

2014-02-26T03:29:13Z

Thisjosh: Created page with " == Sponsor == Joshua Cooper - starving hacker: in search of a voting member to submit this proposal. == History == == Background == A large format CNC router (4' x 4' or ..."

== Sponsor ==

Joshua Cooper - starving hacker: in search of a voting member to submit this proposal.

== History ==

== Background ==

A large format CNC router (4' x 4' or 4' x 8') would be a great benefit to the space.

== Language ==

Authorize the board to spend up to $X (total) on materials stated above, and directly related costs, such as replacement router bit, software, a computer with a parallel port, and delivery costs.