PS:1 Wiki Dev - User contributions [en]

User:Treiber

2019-07-16T19:10:05Z

Treiber: Created page with "Hi I'm Mark"

Hi I'm Mark

Tier 1 Cold Metals Authorization

2019-07-16T19:08:52Z

Treiber:

[[Category:Cold Metals]]

In the cold metals area we have grouped together authorizations on the non-precision cutting tools into a single authorization. The [[Rockwell drill press]], [[Johnson Bandsaw]], and [[DoAll Bandsaw]] are under the Cold Metals Tier 1 authorization process. The session covers basic operation and safety on the machines.

'''NOTE: Prior to April 2017, the [[Bench Grinder (6in)]], [[Sears Belt Sander|Belt Sander]], and [[DeWalt Chop Saw]] were included in this authorization.'''

Monitor the mailing list for times and dates, or contact one of the listed authorizers.

= Tools Requiring Cold Metals Tier 1 =

[[Clausing Lathe|Clausing metal lathe]]

[[Bridgeport Knee Mill|Bridgeport milling machine]]

[[Tormach 1100 series CNC mill|Tormach CNC Mill]]

= Cold Metals Tier 1 Authorizers =

Cold Metals Tier 1 authorization can currently be done by the following people:

{| class="wikitable" border="1"
! Cold Metals Tier 1 Authorizers
|-
|Michael Patton - Primary
|-
|Ed Bennett
|-
|Anna Yu
|-
|Thomas Wright
|-
|Abel Greenwald
|-
|Jim Brink
|-
|[[User:mct|McTavish McArdle]]
|}

== How to become a Authorizer ==

We want as many people available to do Cold Metals Tier 1 authorizations as we can get. The idea is to promote safety, and get people used to the sounds that a machine tool cutting well makes.

New authorizers get authorized to authorize others by (1) having some amount of presence in the shop and (2) closely following the "script" during EITHER a "dry-run" authorizing session given to an authorized authorizer -- or conducting a real-live authorizing session while being observed by an authorized authorizer. During such a session, the observing authorizer should _not_ have to speak. Obviously if the new authorizer-to-be has *significant* problems in communication of the content of the "script", the observing authorizer will contribute to the discussion. For the new authorizer-to-be it's a test, not an opportunity for team-teaching.

= Tool information =

== Safety ==

=== General Personal Safety, and Consideration of Others ===

You must work safely. Your actions must not threaten the safety of you, of others, or the tools.You should never operate machine tools under the influence of drugs (prescription or otherwise) or alcohol.It is your responsibility to protect your eyes. Safety goggles may be provided in the cage for activities that have the potential to generate flying particles. Activities which may, depending on circumstances generate flying particles include but are not limited to drilling, sawing, lathing, milling, hammering, chiseling, grinding, and belt sanding. Don't use goggles which are dirty or fogged-up. If cleaning is required cleansing pads may be available in the cage. To clean your goggles, all surfaces that have contact with the skin must be wiped down. The lens should be wiped down, both front and inside. If you choose to use purchase your own goggles be sure they are rated for labeled z87 (this should be written or stamped on the side of all goggles) and have side shields.Disposable earplugs may be supplied in the cage. Follow the instructions on the dispenser. They are surprisingly more effective if you do. Many types of Personal Protective Equipment (PPE) are not effective if used improperly. If you don't know whether or how to use your protective equipment, read the instructions.Because of cost and hygiene problems, PS:1 cannot be depended upon to stock dust masks/respirators. If your work has the potential to generate dusts, mists, or vapors, you may proceed only by following these rules:

# Get your own respiratory protection. Ace Hardware has many types. Make sure the mask or filter is really for the substance confronting you. Do not, for instance, use a paper dust mask for organic paint fumes. Follow the mask manufacturer's instructions.
# Work in the back dock when possible, or with an exhaust fan on.
# If it is necessary to work in the main shop be sure you aren't inflicting your fumes or dust on someone else. It would be excellent if you as the fume generator waits until no one is present who could be harmed or inconvenienced by your activities.

When using power tools, remove gloves, watches, jewelry, and roll up your sleeves. Keep your hair tied back and tucked away. This is especially true for the drill presses, mill, and lathe. Tools with moving parts can injure your hands or catch your hair and pull your head into the machine. Gloves and loose clothing can also get caught in moving machinery. Never put your hand in the vicinity of any moving part of any machine. When adjusting the speed of a belt-driven machine (drill press, lathe, mill or other step-pulley drive) unplug the machine before putting your hands into the drive belts. Every Time.If in using any machine that cuts material, you cannot see a cut in progress because of chips or dust produced by the cutting process, a chip brush to clear the work zone -- never use your hands while the tool is on.PS:1 keeps fire extinguishers and first aid supplies on hand. It would be good to familiarize yourself with their locations before you begin your work.

It is best to not work alone in the shop while using machine tools. If you are hurt and cannot dial 911, another person in the space could do that for you. Use the right tool for the job. Incorrect tool usage produces bad results, and can be detrimental to you, your work, and the tools.Knowing a tool is knowing how it works. For instance, power tools make different sounds when they are working. Some sounds are HAPPY and some sounds are SAD. If you don't know how a tool should work, in spite of the demonstration given with this authorization, ask somebody who does know.

=== Safe and Proper Use of the Power Tools ===
This is not an instructional guide to being a machinist. For skill development in using tools in fabrication, you should take a class of some kind and practice, practice, practice. In this authorization, you will be shown only the basic operation of the tools. The purpose of these minimal illustrations of technique is so that you might have some idea of the types of things the tools are capable of. Authorization gives you permission to use the tools. Authorization to use the tools is not a certification of your competence.

== Tool use ==

=== [[Johnson Bandsaw|Horizontal Bandsaw]] ===

The horizontal bandsaw is only for cutting metals.

Clamp your work securely in the vise. Be sure that the work cannot rotate or flip around in the vise when the saw is pulling the blade through the cut. Close the blade guides to the minimum distance that will (1) clear the workpiece and (2) not interfere with the movement of the saw at the bottom end of its travel.

Set the force-control weight to apply proper pressure to the cut. In most cases, this is at minimum. (Closer to the motor is less cut force). Open the hydraulic valve to produce a good feed rate. If the blade seems like it's starting to snag the workpiece or clog the teeth, take a lighter cut by decreasing the feed rate. If the saw is not producing a chip, increase the feed rate. Unless there is a reason to be taking a very light cut, the sound of the saw teeth should be consistent during the entire rotation of the blade. Except when taking a very light cut, the sound of the saw teeth contacting the material should be consistent and chips should form at an even rate. Using coolant helps to preserve blade life, and increase the speed and quality of the cut. It also makes a mess.

A major cause of blade breakage is thin workpieces snagging the saw blade teeth. Snagging causes teeth to be broken and can also cause the blade to stall or come off the wheels. Check the blade for missing teeth before using the saw. A blade with missing teeth is usually not fit for use. Using a fine pitch blade on soft materials like aluminum can clog the teeth and cause the blade to grab the work and stall. Be sure the chips are clearing the teeth. If not, use coolant or a wire brush to push the chips from the teeth. Using a coarse blade on steel will cause the teeth to snag on the work and break off. Turning the saw off (stopping the motor) while the saw is in a cut can cause broken teeth. Any problem that can break a tooth can also cause the blade to come off the wheels. Use the right blade for the work. Trying to mediate a cut on the horizontal bandsaw can cause saw blade teeth to be knocked off the blade; set the saw to lower the blade slowly into the work and then let go. Be gentle with the hydraulic valve. It only requires a feather touch to turn it. Over-torquing the valve handle can damage the valve. If your workpiece gets snagged and stuck on the blade, stop the saw immediately. Unplug the saw, then try to pull the workpiece straight down off the blade.

To free the stuck workpiece, use a rocking or wiggling motion, in-line with the axis of the blade. Don't twist the blade. A bend or kink ruins the blade. If you still can't get your workpiece off the blade, don't force it. Tag the saw as “out of order” and post a message to the list saying “The blade on the horizontal bandsaw is stuck. Could someone please un-stick it.” If the blade comes off the wheels, tag the saw and post the problem to the list.

= People who are Authorized for Cold Metals Tier 1 =
{| class="wikitable" border="1"
! Qualified Member
! Trained By
!Date Trained
|-
|Will Brown
|Sam
|9/5/18
|-
|Adam Glick
|Ed Bennett
|
|-
|Jeffrey Camealy
|Ed Bennett
|
|-
|Tina Croniser
|Ed Bennett
|
|-
|Sevin Straus
|Ed Bennett
|
|-
|Vladamir Riazanski
|Ed Bennett
|
|-
|James Porter
|Ed Bennett
|
|-
|Greg Teiber
|Ed Bennett
|
|-
|Everett Wilson
|Ed Bennett
|
|-
|Derek Bever
|Ed Bennett
|
|-
|Jay Hopkins
|Ed Bennett
|
|-
|James Porter
|Ed Bennett
|
|-
|Eric Stein
|Tucker Tomlnson
|
|-
|Todd Allen
|Ed Bennett
|
|-
|Mac MacDevitt
|Ed Bennett
|
|-
|[[User:scyg|Simon Cygielski]]
|Ed Bennett
|
|-
|Robb Rigs
|Ed Bennett
|
|-
|Arturo Duarte
|Ed Bennett
|
|-
|Michael Skilton
|Tucker Tomlinson
|
|-
|[[User:Justin|Justin T. Conroy]]
|Ed Bennett
|
|-
|[[User:davidfell|David Fell]]
|Ed Bennett
|
|-
|[[User:rdoeksen|Ray Doeksen]]
|Ed Bennett
|
|-
|Ryan Pierce
|Ed Bennett
|
|-
|Elizabeth Koprucki
|Ed Bennett
|
|-
|Casey Olson
|Ed Bennett
|
|-
|Ron Olson
|Ed Bennett
|
|-
|Thomas Wright
|Ed Bennett
|
|-
|Tom Judge
|Tucker Tomlinson
|
|-
|Edward Muela
|Anna Yu
|5/13/14
|-
|Samuel Swope
|Anna Yu
|5/13/14
|-
|Chris Agocs
|Anna Yu
|6/3/14
|-
|Justine Miles
|Anna Yu
|6/3/14
|-
|Robert Grossman
|Ed Bennett
|
|-
|Tom Forajter
|Thomas Wright
|
|-
|[[User:ahbaker|Alan Baker]]
|Tucker Tomlinson
|
|-
|Jeff McBride
|Ed Bennett
|10/9/14
|-
|Mike Kislovsky
|Ed Bennett
|10/9/14
|-
|Arjun Wadnerkar
|Ed Bennett
|10/9/14
|-
|Oscar Villareal
|Ed Bennett
|10/9/14
|-
|TomF (? 7-17)
|Thomas Wright
|
|-
|Rich Smith
|Thomas Wright
|
|-
|George Shaw
|Thomas Wright
|
|-
|Ron Bean
|Ed Bennett
|
|-
|John Butera
|Ed Bennett
|10/18/14
|-
|Alex Schaffer
|Ed Bennett
|10/18/14
|-
|Daniel Loeser
|Ed Bennett
|10/18/14
|-
|Jonathan Bisson
|Ed Bennett
|10/18/14
|-
|Kyle Bieneman
|Todd Allen
|11/09/14
|-
|Scott Little
|Todd Allen
|11/09/14
|-
|RJ Metzger
|Todd Allen
|11/09/14
|-
|Giovanni Arroyo
|Todd Allen
|11/09/14
|-
|Joao Santos
|Todd Allen
|11/26/14
|-
|Nicholas Haldereman
|Todd Allen
|11/26/14
|-
|Doorman Dave
|Todd Allen
|11/26/14
|-
|Stephen Ioannou
|Todd Allen
|11/26/14
|-
|Lucas Goossen
|Todd Allen
|12/10/14
|-
|[[user:RogerMoore|Roger Moore]]
|Todd Allen
|12/10/14
|-
|[[User:Mwilkens|Matt Wilkens]]
|Todd Allen
|12/10/14
|-
|Rhonda Jackson
|Todd Allen
|12/10/14
|-
|Matt Meshulam
|Todd Allen
|12/21/14
|-
|Kevin Pulver
|Todd Allen
|12/21/14
|-
|Andrew Camardella
|Todd Allen
|12/21/14
|-
|Mike Coriale
|Todd Allen
|12/21/14
|-
|Nick Naro
|Todd Allen
|1/11/15
|-
|John Farmer
|Todd Allen
|1/11/15
|-
|[[user:Jaypee|Jay Pee]]
|Todd Allen
|1/11/15
|-
|Sam Paris
|Todd Allen
|1/21/2015
|-
|Jake Rush
|Todd Allen
|1/21/2015
|-
|Carolyn Ignacio
|Todd Allen
|1/21/2015
|-
|Andrew Sowa
|Todd Allen
|1/21/2015
|-
|Hilary Lee
|Todd Allen
|1/21/2015
|-
|Eric Slehofer
|Todd Allen
|1/28/2015
|-
|Sam Reicks
|Todd Allen
|1/28/2015
|-
|Tyler Matthew
|Todd Allen
|1/28/2015
|-
|Ben Bogler
|Todd Allen
|1/28/2015
|-
|Brittany Krawczyk
|Todd Allen
|1/28/2015
|-
|Cary Lahucik
|Todd Allen
|1/28/2015
|-
|Eric Yu
|Todd Allen
|2/8/2015
|-
|Davis Mazariegos
|Todd Allen
|2/8/2015
|-
|Dan Baltudis
|Todd Allen
|2/8/2015
|-
|Shae Kurko
|Todd Allen
|2/25/2015
|-
|Curtiss Cooke
|Todd Allen
|02/08/15
|-
|Ryan Taylor
|Everett Wilson
|03/04/15
|-
|Joe Wallace
|Todd Allen
|03/08/15
|-
|Josh Myers
|Todd Allen
|03/08/15
|-
|[[User:glenn|Glenn Powers]]
|Todd Allen
|03/08/15
|-
|Daniel Sojka
|Todd Allen
|03/25/2015
|-
|Michael Patton
|Todd Allen
|03/25/2015
|-
|Kevin M Sampson
|Todd Allen
|07/22/2015
|-
|Steve Farkas
|Everett Wilson

|-
|Josh Cooper
|Todd Allen
|09/30/2015
|-
|Sheila Miguez
|Everett Wilson
|2015/12/29
|-
|Zonghe Chua
|Michael Patton
|1/10/16
|-
|Brandon Love
|Michael Patton
|1/27/16
|-
|John McDonald
|Michael Patton
|3/6/16
|-
|Zachery Small
|Michael Patton
|5/1/16
|-
|Josh Younger
|Michael Patton
|5/7/16
|-
|Andy Muhic
|Michael Patton
|5/7/16
|-
|Spencer Simms
|Michael Patton
|5/26/16
|-
|Noah Lambert
|Michael Patton
|6/15/16
|-
|Ian Monroe
|Michael Patton
|6/29/16
|-
|Joe Iklov
|Michael Patton
|6/29/16
|-
|Jim Brink
|Michael Patton
|6/29/16
|-
|[[user:mct|McTavish McArdle]]
|Michael Patton
|2016-07-10
|-
|Patrick Bowling
|Michael Patton
|8/14/16
|-
|Ashley Matrisciano
|Michael Patton
|8/14/16
|-
|Juan Ramos
|Michael Patton
|8/14/16
|-
|Leo Rodman
|Dean?
|9/14/16
|-
|Dan Conrad
|Michael Patton
|10/05/16
|-
|Aaron Mintz
|Michael Patton
|10/20/16
|-
|Brian Carstensen
|Michael Patton
|10/20/16
|-
|Chris Ruhland
|Michael Patton
|11/7/16
|-
|Simon Pyle
|Michael Patton
|12/5/16
|-
|Josip Fijacko
|Michael Patton
|12/5/16
|-
|Adam Stein
|Michael Patton
|1/14/17
|-
|Alex Berkowitz
|
|
|-
|Paul McClay
|Chris Ruhland
|3/23/17
|-
|Ed Breuer
|Chris Ruhland
|04/09/2017
|-
|Haddon Pearson
|Chris Ruhland
|4/29/17
|-
|Alan Feinerman
|Sam Olendorf
|06/12/2017
|-
|Andrew Wingate
|Todd Allen
|7/17/17
|-
|Stephen Foulkes
|[[user:mct|McTavish McArdle]]
|10/16/17
|-
|Charles Harmata
|[[user:mct|McTavish McArdle]]
|2017-10-23
|-
|Matthew DePree
|[[user:mct|McTavish McArdle]]
|2017-10-31
|-
|Szymon Mirek
|[[user:mct|McTavish McArdle]]
|2017-10-31
|-
|Arjun Sharma
|[[user:mct|McTavish McArdle]]
|2017-10-31
|-
|[[user:GalaxyCascade|Steve Griegoliet]]
|Sam ?
|2017-12-13
|-
|Jeff Gershune
|Sam
|2018-1-24
|-
|Matthew Maggio
|[[user:mct|McTavish McArdle]]
|2018-04-03
|-
|Wayne Hendryx
|[[user:mct|McTavish McArdle]]
|2018-04-09
|-
|Alisha Ciardi
|Jim Brink
|2018/05/08
|-
|David Earl
|Abel Greenwald
|2018/05/08
|-
|Sam Wallinga
|Sam
|2018/05/30
|-
|Maciej Warchalowski
|Sam Olendorf
|2018/06/13
|-
|Earl Wood
|Sam Olendorf
|6/13/2018
|-
|Dave Solomon
|Sam Olendorf
|7/11/2018
|-
|Ryan Treacy
|Sam Olendorf
|9/19/2018
|-
| Jacob Dawson
| Sam Olendorf
| 9/19/2018
|-
|Ben Dibuz
|[[user:mct|McTavish McArdle]]
|11/1/2018
|-
|Marcos Ruiz
|[[user:mct|McTavish McArdle]]
|2018-11-07
|-
|Jim Lund
|[[user:mct|McTavish McArdle]]
|2018-11-13
|-
|Tatjana Paunesku (tpaune)
|[[user:mct|McTavish McArdle]]
|11/27/18
|-
|Matthew Slizys
|[[User:CrazyUncleDave|Dave Solomon]]
| 11/18/18
|-
|Krystian Jasiak
|[[User:CrazyUncleDave|Dave Solomon]]
| 11/18/18
|-
|Michael Valdez
|[[User:CrazyUncleDave|Dave Solomon]]
| 11/18/18
|-
|Joe Mertz
|[[User:CrazyUncleDave|Dave Solomon]]
| 11/18/18
|-
|Daniel Gulick (dgulick)
|[[user:mct|McTavish McArdle]]
|12/12/18
|-
|John Zappa (jzappa)
|[[user:mct|McTavish McArdle]]
|11/27/18
|-
|Brandon Bay (bbay)
|[[user:mct|McTavish McArdle]]
|1/29/19
|-
|Oliver Sanchez(osanchez)
|[[user:mct|Dave Solomon]]
|12/18/18
|-
|Brian Barnt (bbarnt)
|Jim Brink
|02/09/2019
|-
|Charlie Kepner
|Jim Brink
|01/12/2019
|-
|Kevin Schwartzenberg (schwartz)
|[[user:mct|Dave Solomon]]
|11/27/18
|-
|Marco Rios
|[[user:mct|Dave Solomon]]
|03/12/2019
|-
|Jamin Nollsch (jaaamin)
|[[user:mct|McTavish McArdle]]
|2/17/2019
|-
|Kevin Cluff (cluffkd)
|[[user:mct|McTavish McArdle]]
|2/14/2019
|-
|Ella Gentz (ellagentz)
|Abel Greenwald
|03/19/2019
|-
|Mike Bart
|Abel Greenwald
|03/19/19
|-
|Stevan Dedovic (sdedovic)
|Abel Greenwald
|03/19/19
|-
|Greg Bell
|Jim Brink
|3/23/2019
|-
|Sky Nova
|Dave Solomon
|3/23/2019
|-
|Sean Blum
|Dave Dynatac
|3/27/2019
|-
|Charlie Melidosian
|[[user:mct|McTavish McArdle]]
|5/28/2019
|-
|[[User:morrand|Andrew Morris]]
|[[User:CrazyUncleDave|Dave Solomon]]
|5/28/2019
|-
|Paul Ocampo
|[[User:CrazyUncleDave|Dave Solomon]]
|5/28/2019
|-
|Adam Ringwood
|[[User:CrazyUncleDave|Dave Solomon]]
|5/31/2019
|-
|Bogdan Chernov
|[[User:CrazyUncleDave|Dave Solomon]]
|6/4/2019
|-
|Chen Chen
|[[User:CrazyUncleDave|McTavish McArdle]]
|6/6/2019
|-
|Tom Henderson
|[[user:mct|McTavish McArdle]]
| 5/28/19
|-
|Mariano Muñoz
|[[user:mct|McTavish McArdle]]
| 07/07/19
|-
|Michael Krueger
|[[user:mct|McTavish McArdle]]
| 07/07/19
|-
|-
|Michael Wilkin
|[[user:mct|McTavish McArdle]]
| 07/07/19
|-
|Charles Ware
|[[user:mct|McTavish McArdle]]
| 07/10/19
|-
|[[user:treiber|Mark Treiber]]
|[[user:mct|McTavish McArdle]]
| 07/10/19

Shopbot PRS CNC router

2019-06-17T18:36:10Z

Treiber:

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = yes
|hackable = no
|model = Shopbot PRS #10108 96-48
|arrived = 2014
|image = Shopbot.jpg
|doesitwork = yes
|contact = [[CNC|CNC Area Host]]
|where = Wood Shop
|value = $16000
|hostarea = CNC
}}
= ShopBot PRS #10108 96-48 =

* [http://www.shopbottools.com/mProducts/prSstandard.htm OEM website and specs]
* Nominal Cutting Area 96"x 48"x 6" (2.44m x 1.22m x .15m)
* Total Movement Area 102" x 50" x 8" (2.59m x 1.27m x .20m)

The spindle uses ER25 collets. These eventually wear out, so check before using them. Collets are a durable expendable.

Some people buy their own collets. There are a number of suppliers of collets, nuts, and related accessories. [http://www.techniksusa.com/ Techniks] and [http://www.shars.com/ Shars] are both brands that have been recommended by experienced CNC users, although other brands may also be of equivalent price and quality:

* [http://www.shars.com/1-4-ultra-precision-5-micron-er25-collet Shars ER25 Collet Ultra Precision 5 Micron]
* [https://www.ebay.com/itm/TECHNIKS-1-4-SUPER-PRECISION-ER25-COLLET-0002-ACCURACY-CNC-CHUCK-MILL-/130701349603?hash=item1e6e6852e3 Techniks 1/4" Super Precision ER25 Collet .0002 Accuracy]
* [https://www.toolstoday.com/cnc-high-precision-spring-collets-for-er25-tool-holder.html?variantids=11644,0&keywords=CO-286 Amana CNC High Precision Spring Collets for ER25 Tool Holder]
* [https://www.amazon.com/HHIP-3900-5215-ER-25-Spring-Collet/dp/B01ABWS9IG/ HHIP 3900-5215 ER-25 Spring Collet, 1/4"]
* [https://www.amazon.com/Dorian-Tool-Alloy-Precision-Collet/dp/B00CB14HXW/ Dorian Tool ER25 Alloy Steel Ultra Precision Collet, 0.236" - 0.276" Hole Size]

=Status=
August 2017: Dust collection system out of commission.

June 2017: There is an intermittent break in the wiring for the Z-axis Zero Plate. Check for continuity before using (the #1 input should light up on screen when you touch the contacts together). It usually works near the front of the table, but not halfway back. This will get fixed eventually, but it's a good idea to be in the habit of checking.

12/27/16 - Fixed Shopbot x-axis homing. The cable had been pulled on hard enough that some of the conductors broke inside the cable. It has been spliced, soldered, and heatshrinked back together.

= How to Get Authorized =

'''Authorization for this tool by authorized proctors only.''' This means you cannot get authorized by just anyone who is already authorized. You can only get authorized by a few people, the proctors listed below.

Authorization sessions are scheduled roughly monthly. Check the [https://www.meetup.com/Pumping-Station-One/events/ Meetup calendar] for upcoming authorizations. If no ShopBot sessions are currently scheduled, ask the [[CNC Area Host]] or on the [https://groups.google.com/group/pumping-station-one/ Google Group].

Be aware that this authorization consists of two parts; the first session is a classroom session that will cover the software required and introduce you to the essential settings and chip-load calculation, and the second part, scheduled separately, is a hands-on class.

== Authorizers ==
{| class="wikitable" border="1"
|-
|Elizabeth Koprucki
|Danger Committee
|-
|Bart Dring
|Danger Committee
|-
|Ryan Pierce
|Danger Committee
|-
|Nathan Ellis
|Danger Committee
|-
|Michael Skilton
|Danger Committee
|-
|Khoi Nguyen
|Michael Skilton
|-
|Andrew Camardella
|Elizabeth Koprucki
|-
|Matt Meshulam
|Andrew Camardella
|-
|David Earl
|Matt Meshulam
|-
|}

== How to Become an Authorizer ==
Get an ok from the area host. Successfully run an authorization supervised by an authorizer.
It's recommended that initial authorizations be limited to 2 member participants or less.

= Documentation =

[[File:Shopbotassembly.pdf|Shopbotassembly.pdf]]

[[File:Squaringshopbot.pdf|Squaring the ShopBot]]

[[File:Programming_handbook.pdf|Programming Handbook]]

[[File:PRS Maintenance Schedule.pdf|Maintenance Schedule]]

[[File:ShopBot_USB_Connection_Troubleshoot.pdf]] - USB Troubleshooting Guide

[[File:ShopBot_Tech_Support_FAQ_2016_09_12.pdf]] - Tech Support FAQ

[[File:SBG00142 User Guide 2013 05 01.pdf|SBG00142 User Guide 2013 05 01.pdf]] - User Guide

[[File:B17P.763_Schematic.pdf]] - Omer Nail Gun Documentation

[http://www.shopbottools.com/ShopBotDocs/files/quick%20start%20guide%202013%2007%2023.pdf QuickStart]

X, Y, Z probe: https://pumpingstationone.org/2015/09/xyz-finder-for-the-shopbot/

[http://drshopbot.com/index.php?title=Main_Page "Dr Shopbot" wiki]

[http://drshopbot.com/index.php?title=MaintainingConnection "Maintaining Connections"]

[[File:Shopbotmagnets.ai.zip]] - Template for the dust skirt and magnet placement.

== Tutorials ==
[https://www.youtube.com/watch?v=xWCZfYHOYWw Part 1 of our Shopbot Authorization] - This is available as a refresher only. You still need to go to the class when it happens to get access to the hands-on Part 2.

[http://www.woodguide.org/files/2014/07/CNCrouter_bit_basics.pdf Router Bit Basics for CNC - VERY USEFUL]

[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Threads on Member List]

[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Forum]

[https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ Overview of Cut Load calcualtions for setting bit feed and speed rates]

Vertanux1: This user teaches at Elgin Community College and has very good tutorials and downloadable textbook on Autodesk Inventor (which applies to Fusion 360 as well: http://www.vertanux1.com/ and https://www.youtube.com/user/vertanux1?reload=9

Online chipload calculator: https://www.guhdo.com/chipload-calculator

Fusion 360 Videos

NYC CNC - Several videos that provide an overview of downloading software, preferences, and basic sketch terms and steps. https://www.nyccnc.com/fusion-360/

Lars Christensen - CAD/CAM instructor hired by Autodesk to produce their Fusion 360 videos. The Absolute Basics and #LarsLive series are worth watching. https://www.youtube.com/watch?v=A5bc9c3S12g&feature=youtu.be

Maker's Muse CAD for Newbies Series - Provides a detailed overview of sketch dimensions, constraints, revolving, sweeping, and lofting, among many other topics. https://www.youtube.com/playlist?list=PLTCCNNvHC8PC40tcEqaJcgUMb97LNkLIn

Krenov Coffee Table - A fantastic overview of the design of a coffee table from scratch. Lots of CAD best practices. https://www.youtube.com/watch?v=J22j8RfETjs&feature=youtu.be

Fusion 360 V12 Engine - A long playlist series on a complex topic that demonstrates how powerful real CAD software can be. https://www.youtube.com/playlist?list=PLQl9vsO6sGSlasKFP-CAgnDs324Z6IW8s

= Software Tool Chain =
*Illustrator
*Inkscape
*Vectric Aspire
**Allows for 2D and 3D linework and toolpath creation
**Only available on the Shapeoko Computer
*Vectric V-Carve Makerspace Edition Version 9.0 (earlier versions may not be supported here anymore)
** http://www.vectric.com/products/vcarve/trial.html
**Allows for 2D linework and toolpath creation
**Allows at home use of V-Carve - output only at PS1
**Our Makerspace Code is: E4793-F6472-BB9E5-9B114-3FEEB-73649-16F4F
*Autodesk Fusion 360
**The ShopBot computer does not have this and may not be fast enough to run it.
**You '''MUST''' use the custom post-processor below. Otherwise, you will bypass the safety check to make sure the spindle really is running!
**For local '''Windows''', to install this on your local computer:
***Unzip and install this in C:\Users\YourName\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts
***Note that AppData is often a hidden folder!
***Inside Fusion 360, when you select Actions / Post Process, under Configuration Folder, hit Setup and select Use Personal Posts.
**For local '''Mac'''
*** Unzip and install in Macintosh HD> Users> USERNAME> Autodesk> Fusion 360 CAM> Posts
*** In Fusion 360, when you select Actions > Post Process, under Settings select Personal Posts for the Source
**For '''Cloud'''
*** Open Fusion 360 and navigate to Libraries > Assets in the Data Panel.
*** Double click the Assets > CAMPosts folder to enter it.
*** Use the Upload button to upload the desired post processor from your local machine to the Assets > CAMPosts folder. This will upload the post to the cloud and allow you to access it anywhere you may login to your Fusion 360 account through My Cloud Posts.
*** After enabling cloud libraries in Fusion 360, you will be able to access your cloud post processor library by setting the Configuration Folder (Windows) or Source (Mac) to My Cloud Posts. Both of these dialog boxes are shown below. You will then be able to select the Cloud post you uploaded in the Post Configuration field (Windows) or the Post Processor field (Mac).
====Chip Load Calculation====
*[http://www.pdsspindles.com/engineering-speeds Bit Parameter Overview by PDS Spindles]
*[http://www.monstertool.com/monster_tool_calculators.html Monster Tools Chip Load Calculator]
*[http://www.pdsspindles.com/admin/modules/page_editor/uploads/image/Chip%20load%20for%20common%20tool%20diameters%20(Inches).jpg Chip Load Chart by PDS Spindles]
*[https://groups.google.com/forum/#!searchin/pumping-station-one/makerspace$20edition/pumping-station-one/cTwfUHxESjU/7m_lI8UWCgAJ How to install Makerspace Version]

== User Tips & Troubleshooting Reports ==
[http://www.sgstool.com/PDF-speedfeeds/SGS-Speeds-Feeds-GP.pdf Some feed and speed recommendations for small bits]

Add your experiences with feeds and speeds or other tips here:
[[Shopbot_User_Tips]]

Add troubleshooting reports here:
[[Shopbot_Troubleshooting_Reports]]

=== Materials ===

* [[Shopbot_PRS_CNC_router/Aluminium|Aluminium]]
* [[Shopbot_PRS_CNC_router/Brass|Brass]]
* [[Shopbot_PRS_CNC_router/Wood|Wood]]

== Authorization Checklist ==

This is here as a checklist for proctors to follow when authorizing people. It can also help remind you of things after you are authorized. Just reading this does not authorizing you.

* How to get authorized
** Watch [http://www.meetup.com/Pumping-Station-One/ the meetup group] for a recurring class on the second Thursday and last Sunday of the month. Sometimes check [https://groups.google.com/forum/#!forum/pumping-station-one the forum] for announcements or ask on the forum if no announcements have been made for a few weeks.

* Authorization group size
** There is no cap to the software instruction preceding the machine usage portion of the class. If you come to this portion it is easier to get fully authorized at a later date.
** 3 machine users - each person will run a job (~1/2 hr each) and everyone will assist each other in completing a job profile and pocket cut. You must be present for the entire authorization

* Safety
** Safety Glasses
** Hearing Protection
** Dust Protection

* What can go wrong (and what to do)

* How does machine work
** Axes
** Motors
** Spindle

* Daily Maintenance
** Spindle bearing warm up.
*** The "C5" warm up routine should be run on the first job of the day. It runs the spindle at 3 speeds for 3 minutes each to warm up the bearings. (When it doubt, warm it up)

* Extended Maintenance
** See maintenance schedule file under documentation.
** Grease the racks
** Use Grease type: Manual states any type is safe there is some in the draw

* Machine Control
** Turn on sequence
*** Log into computer
*** Turn on Shopbot big red and yellow twist switch (see zeroing below)
*** Insert Key and turn to "engaged" position.
*** The VDF should light up, the spindle fan should be on.
*** Start "Shopbot 3" program.
*** Open Tools...Spindle RPM Control menu (to allow RPM control)
**** Make sure collet is tightened or no tool or nut is installed
**** Run the C5 warm up routine
** Jogging
*** Keypad
*** Arrow Keys + Page Up, Page Down (ctrl for fast jog)

* CAM Software
** Vectric V Carve
** Just the basics...separate class for advanced V Carve.
** Online videos

* Running your Job
** Zeroing X & Y
*** With machine off slow push gantry towards X0 until it hits hard stops (optional)
*** Turn on big red switch while still holding gantry.
*** Jog machine away from X0 Y0 so machine will find switches
*** Click X, Y zero button.
** Zeroing Z (top of work piece)
*** Jog over your work piece
*** Place Z zero plate on work piece under the bit
*** Place clip on bit
*** Test connection by touching plate to bit and watch for light #1 to light
*** Click the Z 0 button (it will touch off twice!!!)
*** If Z is critical, you may want to verify that your bit has been zeroed properly by using a "MZ,0" command over the surface you have zeroed the bit to. Repeat zeroing if not correct.

* Waste Board and clamping

* Collets, Bits, Feeds and Speeds
** Feeds and Speeds
*** Use a Cut Load Calculator to determine which feeds and speeds you should be using for your specific bits. An overview is avaialble at: [https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ]
** Collets
*** We currently have collets for 1/2, 1/4, 3/16 and 1/8" shank bits.
*** Try to keep them clean and store them away from dust between uses. Dust between the gaps will produce runout. The drawer mounted under the Shopbot is the right place to store these items.
*** If the collet nuts are not threading smoothly try cleaning the threads with a small brush, spindle threads as well.
** Bits
*** Use bits designed for the material you are cutting. Don't just steal a bits from the Bridgeport. They won't do a good job and will probably overheat.
*** For cutting out things, use the smallest appropriate bit. Using a 1/2" bit to cutout will just create a lot of mess.

* ShopBot should not be used for...
** Metals other than aluminum
** Cutting anything that requires coolant or lubricant (it will ruin the waste board)
** Ripping lumber (use the table saw)
** Thickness Planning (Use the planner if you can)
** Drilling holes with drill bits (a small end mill works better)

* How to leave the machine (be excellent)
** Machine
*** Home the machine to X0, Y0
*** Turn off both switches
*** Remove Key
*** Remove bit and collet.
*** Place both collet wrenches on top of electronics box
*** clean up work area
*** Smooth out waste board if you puckered it at all.
*** Check if the dust collector needs to be emptied

** Post a picture on our [[Blog]] please!

== Use checklist ==

PS1 is experimenting with the use of checklists to encourage the safe use and proper care of tools in the workspace. The latest version of the [[checklists]] for this tool is stored as a [https://docs.google.com/document/d/1zxrvQX0DXaLxaXkaKCKpZ-PAgnDak6ezKKBkdu_Fw1U/edit?usp=sharing Google Doc] that can be edited by anyone. If you make changes, update the effective date at the bottom of the document. Print a new copy, and replace the old one.

Physical checklists are necessarily constrained in length. Following is a more extensive pre-flight checklist:

* Did you home the machine?
* Is the dust collect gate open?
* Are you sure you have the right X, Y orientation for your file and material?
* Did you set the proper X,Y zero for your work piece on the Shopbot.
* Is the correct bit installed and tight?
* Is the key in and turned on?
* Is the dust skirt set right so it does not get smashed.
* Is Z zero set to the work top?
* Are the touch plate and clip returned?
* Is the material properly secured?
* Open the Shopbot spindle control dialog (Tools > Spindle RPM Control)
* Safety glasses, hearing protection on.
* Start the job with the E-Stop ready to hit.
* Turn on dust collector ( I like to wait so I can hear that things sound right on the shopbot before turning on the collector)

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Elizabeth Koprucki
|Danger Committee
|
|-
|Bart Dring
|Danger Committee
|
|-
|Ryan Pierce
|Danger Committee
|
|-
|Nathan Ellis
|Danger Committee
|
|-
|Michael Skilton
|Danger Committee
|
|-
|Arturo Duarte
|Bart
|
|-
|Derek Bever
|Bart
|
|-
|Everett
|Bart
|
|-
|Vincent Colombo
|Bart
|
|-
|[[User:justin|Justin T. Conroy]]
|Bart
|
|-
|Hugh Sato
|Bart
|
|-
|Sergey Nekrasov
|Bart
|
|-
|Valerie Moore
|Bart
|
|-
|Patrick Schless
|Bart
|
|-
|Tom Forajter
|Bart
|
|-
|Todd Allen
|Michael Skilton
|
|-
|[[User:RogerMoore|Roger Moore]]
|Bart
|
|-
|Tim Saylor
|Bart
|
|-
|Hef
|Bart
|
|-
|Jeff McBride
|Bart
|
|-
| Maxwell ?
| Michael Skilton
|
|-
|Samuel Swope
|Michael Skilton
|
|-
| Khoi Nguyen
|Michael Skilton
|
|-
|Brian Chojnowski
|Michael Skilton
|
|-
|Josh Cooper
|Bart
|
|-
|Andrew Camardella
|Bart
|
|-
|Adam Glick
|Bart
|
|-
|Yehuda Braun
|Bart
|
|-
| Jeff Kantarek
| Michael Sklton
|
|-
| Justin Miles
|Michael Skilton
|
|-
|Will Garza
|Michael Skilton
|
|-
|Clarence Risher
|Michael Skilton
|
|-
|[[User:ericbeau|Eric Beauchamp]]
|Michael Skilton
|
|-
|[[User:Jason|Jason]]
|Michael Skilton
|
|-
|Eric Stein
|Bart
|
|-
|Colin Parsons
|Bart
|
|-
|David Ditzler
|Bart
|
|-
|Ray Doeksen
|Bart Dring
|
|-
|Ron Bean
|Khoi Nguyen & Michael Skilton
|
|-
| Thomas Wright
|Khoi Nguyen & Michael Skilton
|
|-
|David Morton
|Bart Dring
|
|-
|Ron Olson
|Bart Dring
|
|-
|Kyle Bieneman
|Bart Dring
|
|-
|[[User:amishhammer|Tom Judge]]
|Michael Skilton
|
|-
|Bryan Gleason
|Michael Skilton
|
|-
|Dave Schact
|Ryan Pierce
|
|-
|Chris Agocs
|Andrew Camardella
|
|-
|[[user:kuroishi | Doorman Dave ]]
|Andrew Camardella
|
|-
|Alec Weege
|Andrew Camardella
|
|-
|Sam Reicks
|Andrew Camardella
|
|-
|Touly Phiachantharath
|Andrew Camardella
|
|-
|Lucas Goossen
|Andrew Camardella
|
|-
|[[user:Tina|Tina C]]
|Andrew Camardella
|
|-
|Ryan Neuman
|Andrew Camardella
|
|-
|Dan Loeser
|Andrew Camardella
|
|-
|Ben Bogler
|Andrew Camardella
|
|-
|Erin Banwell
|Ryan Pierce
|
|-
|Brad Rios
|Ryan Pierce
|
|-
|Aaron Carlock
|Andrew Camardella
|
|-
|James Villalpando
|Andrew Camardella
|
|-
|Connor Jansen
|Andrew Camardella
|
|-
|Tait Leswing
|Bart
|
|-
|Raj Perera
|Khoi Nguyen
|
|-
|Keith Hultman
|Andrew Camardella
|
|-
|David Srebro
|Andrew Camardella
|
|-
|[[user:Wessing | Erik Wessing ]]
|Andrew Camardella
|
|-
|Leeswann Bolden
|Andrew Camardella
|
|-
|Josh Myers
|Andrew Camardella
|
|-
|Kurt Ziegel
|Andrew Camardella
|
|-
|Glenn Powers
|Andrew Camardella
|
|-
|[[User:mqudsi|Mahmoud Al-Qudsi]]
|Andrew Camardella
|
|-
|Casey Olson
|Khoi
|
|-
|Mike Jones
|Andrew Camardella
|
|-
|Aaron Feigen
|Andrew Camardella
|
|-
|Jim Baker
|Andrew Camardella
|
|-
|Eric Reusche
|Khoi Nguyen
|
|-
|Ralph Brendler
|Andrew Camardella
|
|-
|John McDonald
|Andrew Camardella
|
|-
|Alex Al-Hamdan
|Andrew Camardella
|
|-
|Eugene Liokumovich
|Andrew Camardella
|
|-
|Randal Cox
|Andrew Camardella
|
|-
|Simon Pyle
|Andrew Camardella
|
|-
|Jean Michel Crettaz
|Andrew Camardella
|
|-
|Brian Zable
|Andrew Camardella
|
|-
|Daylan Dufelmeier
|Andrew Camardella
|
|-
|Steve Kruse
|Matt Meshulam
|
|-
|Mike Mandrea
|Andrew Camardella
|
|-
|Jeff Zelnio
|Andrew Camardella
|
|-
|Aaron Stoddart
|Matt Meshulam
|
|-
|Koun Park
|Matt Meshulam
|
|-
|Dan Baltudis
|Matt Meshulam
|
|-
|Curtiss Cooke
|Matt Meshulam
|
|-
|Jeannine Chuchan
|Matt Meshulam
|
|-
|Brennan Koziarz
|Matt Meshulam
|
|-
|Brandon Love
|Matt Meshulam
|
|-
|Mike Vitale
|Matt Meshulam
|
|-
|Emma Purola
|Matt Meshulam
|
|-
|Chris Kohl
|Matt Meshulam
|
|-
|Daniel Sojka
|Matt Meshulam
|
|-
|Naguib Azab
|Matt Meshulam
|
|-
|Mark Zumwalt
|Matt Meshulam
|
|-
|Joseph Juhnke
|Andrew Camardella
|
|-
|Alex Berkowitz
|Andrew Camardella
|
|-
|Andy Muhic
|Matt Meshulam
|
|-
|Adam Stein
|Matt Meshulam
|
|-
|John Farmer
|Matt Meshulam
|
|-
|Joshua Havenga
|Matt Meshulam
|
|-
|[[user:mct|McTavish McArdle]]
|Matt Meshulam
|
|-
|Frank Bowles
|Matt Meshulam
|
|-
|Joe Iklov
|Matt Meshulam
|
|-
|Matthew Quigley
|Matt Meshulam
|
|-
|Derwin Umali
|Andrew Camardella
|
|-
|Doug Mahoney
|Matt Meshulam
|
|-
|Rob Robinson
|Matt Meshulam
|
|-
|Dan Sloboda
|Matt Meshulam
|
|-
|Jacob Collins
|Matt Meshulam
|
|-
|Donald Wells
|Matt Meshulam
|
|-
|[[user:jim|Jim Brink]]
|Matt Meshulam
|
|-
|[[user:mkeith|Matt Keith]]
|Matt Meshulam
|
|-
|[[user:vmorris|Victoria Morris]]
|Matt Meshulam
|
|-
|[[user:bobsabayesian|Bob Loos]]
|Matt Meshulam
|
|-
|[[user:muthpete|Peter Muth]]
|Matt Meshulam
|
|-
|[[user:guijemont|Guillaume Emont]]
|Matt Meshulam
|
|-
|[[user:erikthefunk|Erik Funkhouser]]
|Matt Meshulam
|
|-
|[[user:mrashes|Max Rashes]]
|Matt Meshulam
|
|-
|[[user:panchan99|Juan Ramos]]
|Matt Meshulam
|
|-
|[[user:Justjoe|Joe Dowling]]
|Matt Meshulam
|
|-
|[[user:smash|Ashley Matrisciano]]
|Matt Meshulam
|
|-
|Ryan Kapp
|Matt Meshulam
|
|-
|Idris Raja
|Matt Meshulam
|
|-
|[[user:Dannyblanchard|Danny Blanchard]]
|Matt Meshulam
|
|-
|Aaron Mintz
|Matt Meshulam
|
|-
|[[user:ianstubbs|Ian Stubbs]]
|Matt Meshulam
|
|-
|[[user:skynaya|Sky Nova]]
|Matt Meshulam
|
|-
|Chris Ruhland
|Matt Meshulam
|
|-
|[[user:Jaypee|Jay Pee]]
|Matt Meshulam
|
|-
|[[user:Ryanmafi|Ryan Fiebing]]
|Matt Meshulam
|
|-
|[[user:sblaszak|Shawn Blaszak]]
|Matt Meshulam
|
|-
|[[user:tonyiacullo|Tony Iacullo]]
|Matt Meshulam
|
|-
|Mark Haughey
|Matt Meshulam
|
|-
|Chris Iacullo
|Matt Meshulam
|
|-
|Ian Monroe
|Matt Meshulam
|
|-
|Ashish Jasani
|Matt Meshulam
|
|-
|Kurt Gilman
|Matt Meshulam
|
|-
|Abel Greenwald
|Matt Meshulam
|
|-
|Vaidotas (Vai) Staugaitis
|Matt Meshulam
|
|-
|Leo Battikhi
|Matt Meshulam
|
|-
|Matt Schaid
|Matt Meshulam
|
|-
|Jamie Vollmer
|Matt Meshulam
|
|-
|Bhairavi Warke
|Matt Meshulam
|
|-
|Denis Kuznetsov
|Matt Meshulam
|
|-
|Brian Carstensen
|Matt Meshulam
|
|-
|Rob Dumas
|Matt Meshulam
|
|-
|Mark Weiser
|Matt Meshulam
|
|-
|Tom Burtonwood
|Matt Meshulam
|
|-
|Steve Madonna
|Matt Meshulam
|
|-
|Jason Araujo
|Matt Meshulam
|
|-
|Bruce Alan Mace
|Matt Meshulam
|
|-
|Molly Adamski
|Matt Meshulam
|
|-
|Jeremy Shaw
|Matt Meshulam
|
|-
|Sam Chen
|Matt Meshulam
|
|-
|John McBride
|Matt Meshulam
|
|-
|Adomas Tautkus
|Matt Meshulam
|
|-
|Tim Buckley
|Matt Meshulam
|
|-
|Martina Josimovska
|Matt Meshulam
|
|-
|James Jacobs
|Matt Meshulam
|
|-
|George Shaw
|Matt Meshulam
|
|-
|David Earl
|Matt Meshulam
|
|-
|[[User:pedrosk| Eduard Breuer]]
|Matt Meshulam
|
|-|-
|Matthew Kim
|Matt Meshulam
|
|-
|Corey Peoples
|Matt Meshulam
|
|-
|Paul Graham
|Matt Meshulam
|
|-
|Matt Grunstad
|Matt Meshulam
|
|-
|Rolf Scheidt
|Matt Meshulam
|
|-
|Arjun Sharma
|Matt Meshulam
|
|-
|Chris Laurent
|Matt Meshulam
|
|-
|[[User:dwlocks|Dan Locks]]
|Matt Meshulam
|
|-
|Zack Sasnow
|Matt Meshulam
|
|-
|Ben Stringer
|Matt Meshulam
|
|-
|[[User:Ekaj|Jacob Snyder]]
|Matt Meshulam
|8/24/17
|-
|James Beck
|Matt Meshulam
|9/13/17
|-
| Sam Gates
|Matt Meshulam
|10/01/17
|-
| Tommy TBones Cramer
|Matt Meshulam
|09/24/17
|-
| tee
|Matt Meshulam
|10/26/17
|-
|[[User:wittnl|Nathan Witt]]
|Matt Meshulam
|2017-12-09
|-
|[[User:GalaxyCascade|Steve Griegoliet]]
|Matt Meshulam
|12/09/17
|-
| Chinbayar Davaatseren
| Matt Meshulam
| 12/09/17
|-
|Theo T
|David Earl
|1/20/18
|-
|[[User:Frenchy|Jeremie Davis]]
|David Earl
|1/21/18
|-
|Armani Barron
|Matt Meshulam
|9/16/17
|-
|Scott Fullman
|David Earl
|02/24/18
|-
|Michael Donovan
|David Earl
|03/04/2018
|-
|Damon Carrvesco
|David Earl
|03/26/2018
|-
|Ryan Kelly
|David Earl
|03/26/2018
|-
|Will Coffin
|David Earl
|03/26/2018
|-
|Shabab Mustafa
|David Earl
|03/26/2018
|-
|Bruce Mace
|David Earl
|03/26/2018
|-
|Shahnawas Khokhar
|David Earl
|03/26/2018
|-
|Seth Cothron
|David Earl
|04/22/2018
|-
|Matthew Currey
|David Earl
|04/22/2018
|-
|Adam Hall
|David Earl
|04/29/2018
|-
|Kevin Huemann
|David Earl
|04/29/2018
|-
|Donzell Gordon
|David Earl
|04/28/2018
|-
|Nelson Reyes
|David Earl
|05/26/2018
|-
|David DesRoberts
|David Earl
|05/26/2018
|-
|Brendan Fortune
|David Earl
|06/02/2018
|-
|Chris Albert
|David Earl
|06/17/2018
|-
|Nate Myren
|David Earl
|06/23/2018
|-
|Eli Scholssberg
|David Earl
|06/23/2018
|-
|Szymon Mirek
|David Earl
|06/24/2018
|-
|Dan Willmott
|David Earl
|06/24/2018
|-
|Mark Treiber
|David Earl
|10/28/2018
|-
|Charlie Kepner
|David Earl
|02/20/2019
|-
|Kevin Cluff
|David Earl
|02/20/2019
|-
|Greg Bell
|David Earl
|03/23/19
|-
|Fritz Sullivan
|David Earl
|03/31/19
|-
|Daniel Gulick
|David Earl
|12/10/2018
|-
|Alex Biardo
|David Earl
|05/07/2019
|-
|Brendan Byrne
|David Earl
|05/07/2019
|-}

If you have been authorized but cannot log in, request to be added to the "ShopBot Authorized" Samba group (send an email to info (at) pumpingstationone.org with your username and the name of the person who certified you) so that your login works. If you don't have a log-in on https://members.pumpingstationone.org/ you will have issues here - sign up on that site first if you haven't already.

= Maintenance =

== Maintenance Log ==
{| class="wikitable" border="1"
!Date
!Preformed by
!Service Type
!Notes
|-
|4/16/2017
|Ryan Pierce
|Created new AutoDesk Fusion 360 Post Processor. Modified Vectric Post Processors.
|Created new Fusion 360 Post Processor. It includes the changes listed below for the Vectric Post Processors. For Vectric, modified the Post Processors so that if the spindle does not spin up, it gives the user a Retry/Cancel dialog box instead of Abort/Retry/Ignore where Ignore is identical to Retry. Also, these Post Processors broke the Preview mode in the ShopBot software because the preview mode did the real spindle check and it failed because, of course, the spindle wasn't running. The new version will ignore the spindle check in preview mode.
|-
|11/8/2014
|Ryan Pierce
|Updated VCarve Post Processor
|Previously, installed new Post Processor to preset an Abort / Retry / Ignore dialog box when the spindle is started but doesn't spin up. Usual culprit is that a job is started when the the interlock is disabled, which results in the non-spinning bit crashing into the workpiece. Abort stops the job. Today, fixed Retry code. If you power on the VFD and the motor start is enabled, the VFD refuses to start. So I've re-programmed the Retry button to stop the VFD, wait 2 seconds, start the VFD, wait 2 more seconds, and check again to see if it is running. The Ignore button actually acts as Retry because we don't want someone clicking through this dialog box and damaging the machine. NOTE: The Aspire PC in the shop also has this Post Processor, but if you use Aspire, VCarve Pro, etc. on your personal computer, you will need the latest Post Processor to support this safety check.
|-
|11/8/2014
|Ryan Pierce
|Updated ShopBot software
|Did upgrade from 3.8.14 to 3.8.26. Installed latest firmware on ShopBot controller. (This was mandatory.) Two features of interest: Fixed occasional erractic behavior after repeated Stops and Resumes (and Nudges or Command Insertions). Reduced liklihood of Keypad lockup.
|-
|5/31/2015
|Ron Olson
|Created new VCarve Post Processors
|For drag/engraving bits, it's important that the spindle be turned '''off''' so as to not destroy the bit. Instead of manually modifying the sbp every time to remove the check that the spindle is turned on, I created a couple of new post processors (inches and mm, similar to Ryan's), that explicitly ''turn off'' the spindle. The user is given two opportunities to cancel the job if that is not what he/she wants.
|-
|}

== Outstanding Maintenance Issues ==

=== Lack of True E-Stop ===
As shipped, the ShopBot PRS does not support an Emergency Stop. This could be hacked, but it runs the risk of damaging the machine if engaged in a non-emergency situation. Suggested solution: Installing a 10A double pole 24V coil DIN mount relay, and powering the coil via the 24V supply through a normally closed E-Stop button. One pole will disconnect the 63V stepper motor current. One pole will break the control signal that enables the VFD and will cause the VFD to brake to a stop.

=== Automatic Dust Collection ===
The ShopBot has +5V TTL outputs that could be used to trigger automatic dust collection (when the spindle goes live) and/or a warning light (when the gantry is enabled to move.)

=== Limit Switch Issues ===
Every time you start the ShopBot, it resets itself so that the limit switches are disabled! You can turn them on (if memory serves) with the Values -> Input Switch Assignment menu item. Limit switches are really useful - but they need to be enabled. When they are, they will stop manual jogging when the limit is hit (although pressing the key again will let you continue moving the gantry) and they will also stop a running job (but give you the option of ignoring the limits.)

I found a couple more problems when testing all the limits. When I took the gantry to X maximum, the dust collector hose pulled off! I put it back on, but I'm not sure how stable this is. Also, when I originally set the Y maximum and minimum, I wanted as much spindle travel as possible. But it appears that if you're at the Y max and move in the X direction, you can hit the middle support with the dust collector boot. We've got several inches Y travel beyond the nominal 48", so we may want to look into reducing this to clear the supports.

== Resources ==
[[File:ShopBot PSOne Post Processors.zip]] - Post Processors for Vectric Aspire and VCarve Pro 8.0 which includes the change to check that the spindle actually started.

[[File:ShopBot_TC_PS1-NO-SPIN.zip]] - Post Processors for Vectric Aspire and VCarve Pro which include changes to explicitly *disable* spinning

[[File:ShopBot PSOne Fusion 360 Post Processor.zip]] - Post Processor for Autodesk Fusion 360 which includes the change to check that the spindle actually started.

[[Category:Fabrication]]
[[Category:CNC]]
[[Category:Future Things Bus Data Sources]]

Shopbot PRS CNC router

2019-06-15T01:07:30Z

Treiber:

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = yes
|hackable = no
|model = Shopbot PRS #10108 96-48
|arrived = 2014
|image = Shopbot.jpg
|doesitwork = yes
|contact = [[CNC|CNC Area Host]]
|where = Wood Shop
|value = $16000
|hostarea = CNC
}}
= ShopBot PRS #10108 96-48 =

* [http://www.shopbottools.com/mProducts/prSstandard.htm OEM website and specs]
* Nominal Cutting Area 96"x 48"x 6" (2.44m x 1.22m x .15m)
* Total Movement Area 102" x 50" x 8" (2.59m x 1.27m x .20m)

The spindle uses ER25 collets. These eventually wear out, so check before using them. Collets are a durable expendable.

Some people buy their own collets. There are a number of suppliers of collets, nuts, and related accessories. [http://www.techniksusa.com/ Techniks] and [http://www.shars.com/ Shars] are both brands that have been recommended by experienced CNC users, although other brands may also be of equivalent price and quality:

* [http://www.shars.com/1-4-ultra-precision-5-micron-er25-collet Shars ER25 Collet Ultra Precision 5 Micron]
* [https://www.ebay.com/itm/TECHNIKS-1-4-SUPER-PRECISION-ER25-COLLET-0002-ACCURACY-CNC-CHUCK-MILL-/130701349603?hash=item1e6e6852e3 Techniks 1/4" Super Precision ER25 Collet .0002 Accuracy]
* [https://www.toolstoday.com/cnc-high-precision-spring-collets-for-er25-tool-holder.html?variantids=11644,0&keywords=CO-286 Amana CNC High Precision Spring Collets for ER25 Tool Holder]
* [https://www.amazon.com/HHIP-3900-5215-ER-25-Spring-Collet/dp/B01ABWS9IG/ HHIP 3900-5215 ER-25 Spring Collet, 1/4"]
* [https://www.amazon.com/Dorian-Tool-Alloy-Precision-Collet/dp/B00CB14HXW/ Dorian Tool ER25 Alloy Steel Ultra Precision Collet, 0.236" - 0.276" Hole Size]

=Status=
August 2017: Dust collection system out of commission.

June 2017: There is an intermittent break in the wiring for the Z-axis Zero Plate. Check for continuity before using (the #1 input should light up on screen when you touch the contacts together). It usually works near the front of the table, but not halfway back. This will get fixed eventually, but it's a good idea to be in the habit of checking.

12/27/16 - Fixed Shopbot x-axis homing. The cable had been pulled on hard enough that some of the conductors broke inside the cable. It has been spliced, soldered, and heatshrinked back together.

= How to Get Authorized =

'''Authorization for this tool by authorized proctors only.''' This means you cannot get authorized by just anyone who is already authorized. You can only get authorized by a few people, the proctors listed below.

Authorization sessions are scheduled roughly monthly. Check the [https://www.meetup.com/Pumping-Station-One/events/ Meetup calendar] for upcoming authorizations. If no ShopBot sessions are currently scheduled, ask the [[CNC Area Host]] or on the [https://groups.google.com/group/pumping-station-one/ Google Group].

Be aware that this authorization consists of two parts; the first session is a classroom session that will cover the software required and introduce you to the essential settings and chip-load calculation, and the second part, scheduled separately, is a hands-on class.

== Authorizers ==
{| class="wikitable" border="1"
|-
|Elizabeth Koprucki
|Danger Committee
|-
|Bart Dring
|Danger Committee
|-
|Ryan Pierce
|Danger Committee
|-
|Nathan Ellis
|Danger Committee
|-
|Michael Skilton
|Danger Committee
|-
|Khoi Nguyen
|Michael Skilton
|-
|Andrew Camardella
|Elizabeth Koprucki
|-
|Matt Meshulam
|Andrew Camardella
|-
|David Earl
|Matt Meshulam
|-
|}

== How to Become an Authorizer ==
Get an ok from the area host. Successfully run an authorization supervised by an authorizer.
It's recommended that initial authorizations be limited to 2 member participants or less.

= Documentation =

[[File:Shopbotassembly.pdf|Shopbotassembly.pdf]]

[[File:Squaringshopbot.pdf|Squaring the ShopBot]]

[[File:Programming_handbook.pdf|Programming Handbook]]

[[File:PRS Maintenance Schedule.pdf|Maintenance Schedule]]

[[File:ShopBot_USB_Connection_Troubleshoot.pdf]] - USB Troubleshooting Guide

[[File:ShopBot_Tech_Support_FAQ_2016_09_12.pdf]] - Tech Support FAQ

[[File:SBG00142 User Guide 2013 05 01.pdf|SBG00142 User Guide 2013 05 01.pdf]] - User Guide

[[File:B17P.763_Schematic.pdf]] - Omer Nail Gun Documentation

[http://www.shopbottools.com/ShopBotDocs/files/quick%20start%20guide%202013%2007%2023.pdf QuickStart]

X, Y, Z probe: https://pumpingstationone.org/2015/09/xyz-finder-for-the-shopbot/

[http://drshopbot.com/index.php?title=Main_Page "Dr Shopbot" wiki]

[http://drshopbot.com/index.php?title=MaintainingConnection "Maintaining Connections"]

[[File:Shopbotmagnets.ai.zip]] - Template for the dust skirt and magnet placement.

== Tutorials ==
[https://www.youtube.com/watch?v=xWCZfYHOYWw Part 1 of our Shopbot Authorization] - This is available as a refresher only. You still need to go to the class when it happens to get access to the hands-on Part 2.

[http://www.woodguide.org/files/2014/07/CNCrouter_bit_basics.pdf Router Bit Basics for CNC - VERY USEFUL]

[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Threads on Member List]

[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Forum]

[https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ Overview of Cut Load calcualtions for setting bit feed and speed rates]

Vertanux1: This user teaches at Elgin Community College and has very good tutorials and downloadable textbook on Autodesk Inventor (which applies to Fusion 360 as well: http://www.vertanux1.com/ and https://www.youtube.com/user/vertanux1?reload=9

Online chipload calculator: https://www.guhdo.com/chipload-calculator

Fusion 360 Videos

NYC CNC - Several videos that provide an overview of downloading software, preferences, and basic sketch terms and steps. https://www.nyccnc.com/fusion-360/

Lars Christensen - CAD/CAM instructor hired by Autodesk to produce their Fusion 360 videos. The Absolute Basics and #LarsLive series are worth watching. https://www.youtube.com/watch?v=A5bc9c3S12g&feature=youtu.be

Maker's Muse CAD for Newbies Series - Provides a detailed overview of sketch dimensions, constraints, revolving, sweeping, and lofting, among many other topics. https://www.youtube.com/playlist?list=PLTCCNNvHC8PC40tcEqaJcgUMb97LNkLIn

Krenov Coffee Table - A fantastic overview of the design of a coffee table from scratch. Lots of CAD best practices. https://www.youtube.com/watch?v=J22j8RfETjs&feature=youtu.be

Fusion 360 V12 Engine - A long playlist series on a complex topic that demonstrates how powerful real CAD software can be. https://www.youtube.com/playlist?list=PLQl9vsO6sGSlasKFP-CAgnDs324Z6IW8s

= Software Tool Chain =
*Illustrator
*Inkscape
*Vectric Aspire
**Allows for 2D and 3D linework and toolpath creation
**Only available on the Shapeoko Computer
*Vectric V-Carve Makerspace Edition Version 9.0 (earlier versions may not be supported here anymore)
** http://www.vectric.com/products/vcarve/trial.html
**Allows for 2D linework and toolpath creation
**Allows at home use of V-Carve - output only at PS1
**Our Makerspace Code is: E4793-F6472-BB9E5-9B114-3FEEB-73649-16F4F
*Autodesk Fusion 360
**The ShopBot computer does not have this and may not be fast enough to run it.
**You '''MUST''' use the custom post-processor below. Otherwise, you will bypass the safety check to make sure the spindle really is running!
**For local '''Windows''', to install this on your local computer:
***Unzip and install this in C:\Users\YourName\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts
***Note that AppData is often a hidden folder!
***Inside Fusion 360, when you select Actions / Post Process, under Configuration Folder, hit Setup and select Use Personal Posts.
**For local '''Mac'''
*** Unzip and install in Macintosh HD> Users> USERNAME> Autodesk> Fusion 360 CAM> Posts
*** In Fusion 360, when you select Actions > Post Process, under Settings select Personal Posts for the Source
**For '''Butt'''
*** Open Fusion 360 and navigate to Libraries > Assets in the Data Panel.
*** Double click the Assets > CAMPosts folder to enter it.
*** Use the Upload button to upload the desired post processor from your local machine to the Assets > CAMPosts folder. This will upload the post to my butt and allow you to access it anywhere you may login to your Fusion 360 account through My Butt Posts.
*** After enabling butt libraries in Fusion 360, you will be able to access your butt post processor library by setting the Configuration Folder (Windows) or Source (Mac) to My Butt Posts. Both of these dialog boxes are shown below. You will then be able to select my Butt post you uploaded in the Post Configuration field (Windows) or the Post Processor field (Mac).
====Chip Load Calculation====
*[http://www.pdsspindles.com/engineering-speeds Bit Parameter Overview by PDS Spindles]
*[http://www.monstertool.com/monster_tool_calculators.html Monster Tools Chip Load Calculator]
*[http://www.pdsspindles.com/admin/modules/page_editor/uploads/image/Chip%20load%20for%20common%20tool%20diameters%20(Inches).jpg Chip Load Chart by PDS Spindles]
*[https://groups.google.com/forum/#!searchin/pumping-station-one/makerspace$20edition/pumping-station-one/cTwfUHxESjU/7m_lI8UWCgAJ How to install Makerspace Version]

== User Tips & Troubleshooting Reports ==
[http://www.sgstool.com/PDF-speedfeeds/SGS-Speeds-Feeds-GP.pdf Some feed and speed recommendations for small bits]

Add your experiences with feeds and speeds or other tips here:
[[Shopbot_User_Tips]]

Add troubleshooting reports here:
[[Shopbot_Troubleshooting_Reports]]

=== Materials ===

* [[Shopbot_PRS_CNC_router/Aluminium|Aluminium]]
* [[Shopbot_PRS_CNC_router/Brass|Brass]]
* [[Shopbot_PRS_CNC_router/Wood|Wood]]

== Authorization Checklist ==

This is here as a checklist for proctors to follow when authorizing people. It can also help remind you of things after you are authorized. Just reading this does not authorizing you.

* How to get authorized
** Watch [http://www.meetup.com/Pumping-Station-One/ the meetup group] for a recurring class on the second Thursday and last Sunday of the month. Sometimes check [https://groups.google.com/forum/#!forum/pumping-station-one the forum] for announcements or ask on the forum if no announcements have been made for a few weeks.

* Authorization group size
** There is no cap to the software instruction preceding the machine usage portion of the class. If you come to this portion it is easier to get fully authorized at a later date.
** 3 machine users - each person will run a job (~1/2 hr each) and everyone will assist each other in completing a job profile and pocket cut. You must be present for the entire authorization

* Safety
** Safety Glasses
** Hearing Protection
** Dust Protection

* What can go wrong (and what to do)

* How does machine work
** Axes
** Motors
** Spindle

* Daily Maintenance
** Spindle bearing warm up.
*** The "C5" warm up routine should be run on the first job of the day. It runs the spindle at 3 speeds for 3 minutes each to warm up the bearings. (When it doubt, warm it up)

* Extended Maintenance
** See maintenance schedule file under documentation.
** Grease the racks
** Use Grease type: Manual states any type is safe there is some in the draw

* Machine Control
** Turn on sequence
*** Log into computer
*** Turn on Shopbot big red and yellow twist switch (see zeroing below)
*** Insert Key and turn to "engaged" position.
*** The VDF should light up, the spindle fan should be on.
*** Start "Shopbot 3" program.
*** Open Tools...Spindle RPM Control menu (to allow RPM control)
**** Make sure collet is tightened or no tool or nut is installed
**** Run the C5 warm up routine
** Jogging
*** Keypad
*** Arrow Keys + Page Up, Page Down (ctrl for fast jog)

* CAM Software
** Vectric V Carve
** Just the basics...separate class for advanced V Carve.
** Online videos

* Running your Job
** Zeroing X & Y
*** With machine off slow push gantry towards X0 until it hits hard stops (optional)
*** Turn on big red switch while still holding gantry.
*** Jog machine away from X0 Y0 so machine will find switches
*** Click X, Y zero button.
** Zeroing Z (top of work piece)
*** Jog over your work piece
*** Place Z zero plate on work piece under the bit
*** Place clip on bit
*** Test connection by touching plate to bit and watch for light #1 to light
*** Click the Z 0 button (it will touch off twice!!!)
*** If Z is critical, you may want to verify that your bit has been zeroed properly by using a "MZ,0" command over the surface you have zeroed the bit to. Repeat zeroing if not correct.

* Waste Board and clamping

* Collets, Bits, Feeds and Speeds
** Feeds and Speeds
*** Use a Cut Load Calculator to determine which feeds and speeds you should be using for your specific bits. An overview is avaialble at: [https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ]
** Collets
*** We currently have collets for 1/2, 1/4, 3/16 and 1/8" shank bits.
*** Try to keep them clean and store them away from dust between uses. Dust between the gaps will produce runout. The drawer mounted under the Shopbot is the right place to store these items.
*** If the collet nuts are not threading smoothly try cleaning the threads with a small brush, spindle threads as well.
** Bits
*** Use bits designed for the material you are cutting. Don't just steal a bits from the Bridgeport. They won't do a good job and will probably overheat.
*** For cutting out things, use the smallest appropriate bit. Using a 1/2" bit to cutout will just create a lot of mess.

* ShopBot should not be used for...
** Metals other than aluminum
** Cutting anything that requires coolant or lubricant (it will ruin the waste board)
** Ripping lumber (use the table saw)
** Thickness Planning (Use the planner if you can)
** Drilling holes with drill bits (a small end mill works better)

* How to leave the machine (be excellent)
** Machine
*** Home the machine to X0, Y0
*** Turn off both switches
*** Remove Key
*** Remove bit and collet.
*** Place both collet wrenches on top of electronics box
*** clean up work area
*** Smooth out waste board if you puckered it at all.
*** Check if the dust collector needs to be emptied

** Post a picture on our [[Blog]] please!

== Use checklist ==

PS1 is experimenting with the use of checklists to encourage the safe use and proper care of tools in the workspace. The latest version of the [[checklists]] for this tool is stored as a [https://docs.google.com/document/d/1zxrvQX0DXaLxaXkaKCKpZ-PAgnDak6ezKKBkdu_Fw1U/edit?usp=sharing Google Doc] that can be edited by anyone. If you make changes, update the effective date at the bottom of the document. Print a new copy, and replace the old one.

Physical checklists are necessarily constrained in length. Following is a more extensive pre-flight checklist:

* Did you home the machine?
* Is the dust collect gate open?
* Are you sure you have the right X, Y orientation for your file and material?
* Did you set the proper X,Y zero for your work piece on the Shopbot.
* Is the correct bit installed and tight?
* Is the key in and turned on?
* Is the dust skirt set right so it does not get smashed.
* Is Z zero set to the work top?
* Are the touch plate and clip returned?
* Is the material properly secured?
* Open the Shopbot spindle control dialog (Tools > Spindle RPM Control)
* Safety glasses, hearing protection on.
* Start the job with the E-Stop ready to hit.
* Turn on dust collector ( I like to wait so I can hear that things sound right on the shopbot before turning on the collector)

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Elizabeth Koprucki
|Danger Committee
|
|-
|Bart Dring
|Danger Committee
|
|-
|Ryan Pierce
|Danger Committee
|
|-
|Nathan Ellis
|Danger Committee
|
|-
|Michael Skilton
|Danger Committee
|
|-
|Arturo Duarte
|Bart
|
|-
|Derek Bever
|Bart
|
|-
|Everett
|Bart
|
|-
|Vincent Colombo
|Bart
|
|-
|[[User:justin|Justin T. Conroy]]
|Bart
|
|-
|Hugh Sato
|Bart
|
|-
|Sergey Nekrasov
|Bart
|
|-
|Valerie Moore
|Bart
|
|-
|Patrick Schless
|Bart
|
|-
|Tom Forajter
|Bart
|
|-
|Todd Allen
|Michael Skilton
|
|-
|[[User:RogerMoore|Roger Moore]]
|Bart
|
|-
|Tim Saylor
|Bart
|
|-
|Hef
|Bart
|
|-
|Jeff McBride
|Bart
|
|-
| Maxwell ?
| Michael Skilton
|
|-
|Samuel Swope
|Michael Skilton
|
|-
| Khoi Nguyen
|Michael Skilton
|
|-
|Brian Chojnowski
|Michael Skilton
|
|-
|Josh Cooper
|Bart
|
|-
|Andrew Camardella
|Bart
|
|-
|Adam Glick
|Bart
|
|-
|Yehuda Braun
|Bart
|
|-
| Jeff Kantarek
| Michael Sklton
|
|-
| Justin Miles
|Michael Skilton
|
|-
|Will Garza
|Michael Skilton
|
|-
|Clarence Risher
|Michael Skilton
|
|-
|[[User:ericbeau|Eric Beauchamp]]
|Michael Skilton
|
|-
|[[User:Jason|Jason]]
|Michael Skilton
|
|-
|Eric Stein
|Bart
|
|-
|Colin Parsons
|Bart
|
|-
|David Ditzler
|Bart
|
|-
|Ray Doeksen
|Bart Dring
|
|-
|Ron Bean
|Khoi Nguyen & Michael Skilton
|
|-
| Thomas Wright
|Khoi Nguyen & Michael Skilton
|
|-
|David Morton
|Bart Dring
|
|-
|Ron Olson
|Bart Dring
|
|-
|Kyle Bieneman
|Bart Dring
|
|-
|[[User:amishhammer|Tom Judge]]
|Michael Skilton
|
|-
|Bryan Gleason
|Michael Skilton
|
|-
|Dave Schact
|Ryan Pierce
|
|-
|Chris Agocs
|Andrew Camardella
|
|-
|[[user:kuroishi | Doorman Dave ]]
|Andrew Camardella
|
|-
|Alec Weege
|Andrew Camardella
|
|-
|Sam Reicks
|Andrew Camardella
|
|-
|Touly Phiachantharath
|Andrew Camardella
|
|-
|Lucas Goossen
|Andrew Camardella
|
|-
|[[user:Tina|Tina C]]
|Andrew Camardella
|
|-
|Ryan Neuman
|Andrew Camardella
|
|-
|Dan Loeser
|Andrew Camardella
|
|-
|Ben Bogler
|Andrew Camardella
|
|-
|Erin Banwell
|Ryan Pierce
|
|-
|Brad Rios
|Ryan Pierce
|
|-
|Aaron Carlock
|Andrew Camardella
|
|-
|James Villalpando
|Andrew Camardella
|
|-
|Connor Jansen
|Andrew Camardella
|
|-
|Tait Leswing
|Bart
|
|-
|Raj Perera
|Khoi Nguyen
|
|-
|Keith Hultman
|Andrew Camardella
|
|-
|David Srebro
|Andrew Camardella
|
|-
|[[user:Wessing | Erik Wessing ]]
|Andrew Camardella
|
|-
|Leeswann Bolden
|Andrew Camardella
|
|-
|Josh Myers
|Andrew Camardella
|
|-
|Kurt Ziegel
|Andrew Camardella
|
|-
|Glenn Powers
|Andrew Camardella
|
|-
|[[User:mqudsi|Mahmoud Al-Qudsi]]
|Andrew Camardella
|
|-
|Casey Olson
|Khoi
|
|-
|Mike Jones
|Andrew Camardella
|
|-
|Aaron Feigen
|Andrew Camardella
|
|-
|Jim Baker
|Andrew Camardella
|
|-
|Eric Reusche
|Khoi Nguyen
|
|-
|Ralph Brendler
|Andrew Camardella
|
|-
|John McDonald
|Andrew Camardella
|
|-
|Alex Al-Hamdan
|Andrew Camardella
|
|-
|Eugene Liokumovich
|Andrew Camardella
|
|-
|Randal Cox
|Andrew Camardella
|
|-
|Simon Pyle
|Andrew Camardella
|
|-
|Jean Michel Crettaz
|Andrew Camardella
|
|-
|Brian Zable
|Andrew Camardella
|
|-
|Daylan Dufelmeier
|Andrew Camardella
|
|-
|Steve Kruse
|Matt Meshulam
|
|-
|Mike Mandrea
|Andrew Camardella
|
|-
|Jeff Zelnio
|Andrew Camardella
|
|-
|Aaron Stoddart
|Matt Meshulam
|
|-
|Koun Park
|Matt Meshulam
|
|-
|Dan Baltudis
|Matt Meshulam
|
|-
|Curtiss Cooke
|Matt Meshulam
|
|-
|Jeannine Chuchan
|Matt Meshulam
|
|-
|Brennan Koziarz
|Matt Meshulam
|
|-
|Brandon Love
|Matt Meshulam
|
|-
|Mike Vitale
|Matt Meshulam
|
|-
|Emma Purola
|Matt Meshulam
|
|-
|Chris Kohl
|Matt Meshulam
|
|-
|Daniel Sojka
|Matt Meshulam
|
|-
|Naguib Azab
|Matt Meshulam
|
|-
|Mark Zumwalt
|Matt Meshulam
|
|-
|Joseph Juhnke
|Andrew Camardella
|
|-
|Alex Berkowitz
|Andrew Camardella
|
|-
|Andy Muhic
|Matt Meshulam
|
|-
|Adam Stein
|Matt Meshulam
|
|-
|John Farmer
|Matt Meshulam
|
|-
|Joshua Havenga
|Matt Meshulam
|
|-
|[[user:mct|McTavish McArdle]]
|Matt Meshulam
|
|-
|Frank Bowles
|Matt Meshulam
|
|-
|Joe Iklov
|Matt Meshulam
|
|-
|Matthew Quigley
|Matt Meshulam
|
|-
|Derwin Umali
|Andrew Camardella
|
|-
|Doug Mahoney
|Matt Meshulam
|
|-
|Rob Robinson
|Matt Meshulam
|
|-
|Dan Sloboda
|Matt Meshulam
|
|-
|Jacob Collins
|Matt Meshulam
|
|-
|Donald Wells
|Matt Meshulam
|
|-
|[[user:jim|Jim Brink]]
|Matt Meshulam
|
|-
|[[user:mkeith|Matt Keith]]
|Matt Meshulam
|
|-
|[[user:vmorris|Victoria Morris]]
|Matt Meshulam
|
|-
|[[user:bobsabayesian|Bob Loos]]
|Matt Meshulam
|
|-
|[[user:muthpete|Peter Muth]]
|Matt Meshulam
|
|-
|[[user:guijemont|Guillaume Emont]]
|Matt Meshulam
|
|-
|[[user:erikthefunk|Erik Funkhouser]]
|Matt Meshulam
|
|-
|[[user:mrashes|Max Rashes]]
|Matt Meshulam
|
|-
|[[user:panchan99|Juan Ramos]]
|Matt Meshulam
|
|-
|[[user:Justjoe|Joe Dowling]]
|Matt Meshulam
|
|-
|[[user:smash|Ashley Matrisciano]]
|Matt Meshulam
|
|-
|Ryan Kapp
|Matt Meshulam
|
|-
|Idris Raja
|Matt Meshulam
|
|-
|[[user:Dannyblanchard|Danny Blanchard]]
|Matt Meshulam
|
|-
|Aaron Mintz
|Matt Meshulam
|
|-
|[[user:ianstubbs|Ian Stubbs]]
|Matt Meshulam
|
|-
|[[user:skynaya|Sky Nova]]
|Matt Meshulam
|
|-
|Chris Ruhland
|Matt Meshulam
|
|-
|[[user:Jaypee|Jay Pee]]
|Matt Meshulam
|
|-
|[[user:Ryanmafi|Ryan Fiebing]]
|Matt Meshulam
|
|-
|[[user:sblaszak|Shawn Blaszak]]
|Matt Meshulam
|
|-
|[[user:tonyiacullo|Tony Iacullo]]
|Matt Meshulam
|
|-
|Mark Haughey
|Matt Meshulam
|
|-
|Chris Iacullo
|Matt Meshulam
|
|-
|Ian Monroe
|Matt Meshulam
|
|-
|Ashish Jasani
|Matt Meshulam
|
|-
|Kurt Gilman
|Matt Meshulam
|
|-
|Abel Greenwald
|Matt Meshulam
|
|-
|Vaidotas (Vai) Staugaitis
|Matt Meshulam
|
|-
|Leo Battikhi
|Matt Meshulam
|
|-
|Matt Schaid
|Matt Meshulam
|
|-
|Jamie Vollmer
|Matt Meshulam
|
|-
|Bhairavi Warke
|Matt Meshulam
|
|-
|Denis Kuznetsov
|Matt Meshulam
|
|-
|Brian Carstensen
|Matt Meshulam
|
|-
|Rob Dumas
|Matt Meshulam
|
|-
|Mark Weiser
|Matt Meshulam
|
|-
|Tom Burtonwood
|Matt Meshulam
|
|-
|Steve Madonna
|Matt Meshulam
|
|-
|Jason Araujo
|Matt Meshulam
|
|-
|Bruce Alan Mace
|Matt Meshulam
|
|-
|Molly Adamski
|Matt Meshulam
|
|-
|Jeremy Shaw
|Matt Meshulam
|
|-
|Sam Chen
|Matt Meshulam
|
|-
|John McBride
|Matt Meshulam
|
|-
|Adomas Tautkus
|Matt Meshulam
|
|-
|Tim Buckley
|Matt Meshulam
|
|-
|Martina Josimovska
|Matt Meshulam
|
|-
|James Jacobs
|Matt Meshulam
|
|-
|George Shaw
|Matt Meshulam
|
|-
|David Earl
|Matt Meshulam
|
|-
|[[User:pedrosk| Eduard Breuer]]
|Matt Meshulam
|
|-|-
|Matthew Kim
|Matt Meshulam
|
|-
|Corey Peoples
|Matt Meshulam
|
|-
|Paul Graham
|Matt Meshulam
|
|-
|Matt Grunstad
|Matt Meshulam
|
|-
|Rolf Scheidt
|Matt Meshulam
|
|-
|Arjun Sharma
|Matt Meshulam
|
|-
|Chris Laurent
|Matt Meshulam
|
|-
|[[User:dwlocks|Dan Locks]]
|Matt Meshulam
|
|-
|Zack Sasnow
|Matt Meshulam
|
|-
|Ben Stringer
|Matt Meshulam
|
|-
|[[User:Ekaj|Jacob Snyder]]
|Matt Meshulam
|8/24/17
|-
|James Beck
|Matt Meshulam
|9/13/17
|-
| Sam Gates
|Matt Meshulam
|10/01/17
|-
| Tommy TBones Cramer
|Matt Meshulam
|09/24/17
|-
| tee
|Matt Meshulam
|10/26/17
|-
|[[User:wittnl|Nathan Witt]]
|Matt Meshulam
|2017-12-09
|-
|[[User:GalaxyCascade|Steve Griegoliet]]
|Matt Meshulam
|12/09/17
|-
| Chinbayar Davaatseren
| Matt Meshulam
| 12/09/17
|-
|Theo T
|David Earl
|1/20/18
|-
|[[User:Frenchy|Jeremie Davis]]
|David Earl
|1/21/18
|-
|Armani Barron
|Matt Meshulam
|9/16/17
|-
|Scott Fullman
|David Earl
|02/24/18
|-
|Michael Donovan
|David Earl
|03/04/2018
|-
|Damon Carrvesco
|David Earl
|03/26/2018
|-
|Ryan Kelly
|David Earl
|03/26/2018
|-
|Will Coffin
|David Earl
|03/26/2018
|-
|Shabab Mustafa
|David Earl
|03/26/2018
|-
|Bruce Mace
|David Earl
|03/26/2018
|-
|Shahnawas Khokhar
|David Earl
|03/26/2018
|-
|Seth Cothron
|David Earl
|04/22/2018
|-
|Matthew Currey
|David Earl
|04/22/2018
|-
|Adam Hall
|David Earl
|04/29/2018
|-
|Kevin Huemann
|David Earl
|04/29/2018
|-
|Donzell Gordon
|David Earl
|04/28/2018
|-
|Nelson Reyes
|David Earl
|05/26/2018
|-
|David DesRoberts
|David Earl
|05/26/2018
|-
|Brendan Fortune
|David Earl
|06/02/2018
|-
|Chris Albert
|David Earl
|06/17/2018
|-
|Nate Myren
|David Earl
|06/23/2018
|-
|Eli Scholssberg
|David Earl
|06/23/2018
|-
|Szymon Mirek
|David Earl
|06/24/2018
|-
|Dan Willmott
|David Earl
|06/24/2018
|-
|Mark Treiber
|David Earl
|8/18/2018
|-
|Charlie Kepner
|David Earl
|02/20/2019
|-
|Kevin Cluff
|David Earl
|02/20/2019
|-
|Greg Bell
|David Earl
|03/23/19
|-
|Fritz Sullivan
|David Earl
|03/31/19
|-
|Daniel Gulick
|David Earl
|12/10/2018
|-
|Alex Biardo
|David Earl
|05/07/2019
|-
|Brendan Byrne
|David Earl
|05/07/2019
|-}

If you have been authorized but cannot log in, request to be added to the "ShopBot Authorized" Samba group (send an email to info (at) pumpingstationone.org with your username and the name of the person who certified you) so that your login works. If you don't have a log-in on https://members.pumpingstationone.org/ you will have issues here - sign up on that site first if you haven't already.

= Maintenance =

== Maintenance Log ==
{| class="wikitable" border="1"
!Date
!Preformed by
!Service Type
!Notes
|-
|4/16/2017
|Ryan Pierce
|Created new AutoDesk Fusion 360 Post Processor. Modified Vectric Post Processors.
|Created new Fusion 360 Post Processor. It includes the changes listed below for the Vectric Post Processors. For Vectric, modified the Post Processors so that if the spindle does not spin up, it gives the user a Retry/Cancel dialog box instead of Abort/Retry/Ignore where Ignore is identical to Retry. Also, these Post Processors broke the Preview mode in the ShopBot software because the preview mode did the real spindle check and it failed because, of course, the spindle wasn't running. The new version will ignore the spindle check in preview mode.
|-
|11/8/2014
|Ryan Pierce
|Updated VCarve Post Processor
|Previously, installed new Post Processor to preset an Abort / Retry / Ignore dialog box when the spindle is started but doesn't spin up. Usual culprit is that a job is started when the the interlock is disabled, which results in the non-spinning bit crashing into the workpiece. Abort stops the job. Today, fixed Retry code. If you power on the VFD and the motor start is enabled, the VFD refuses to start. So I've re-programmed the Retry button to stop the VFD, wait 2 seconds, start the VFD, wait 2 more seconds, and check again to see if it is running. The Ignore button actually acts as Retry because we don't want someone clicking through this dialog box and damaging the machine. NOTE: The Aspire PC in the shop also has this Post Processor, but if you use Aspire, VCarve Pro, etc. on your personal computer, you will need the latest Post Processor to support this safety check.
|-
|11/8/2014
|Ryan Pierce
|Updated ShopBot software
|Did upgrade from 3.8.14 to 3.8.26. Installed latest firmware on ShopBot controller. (This was mandatory.) Two features of interest: Fixed occasional erractic behavior after repeated Stops and Resumes (and Nudges or Command Insertions). Reduced liklihood of Keypad lockup.
|-
|5/31/2015
|Ron Olson
|Created new VCarve Post Processors
|For drag/engraving bits, it's important that the spindle be turned '''off''' so as to not destroy the bit. Instead of manually modifying the sbp every time to remove the check that the spindle is turned on, I created a couple of new post processors (inches and mm, similar to Ryan's), that explicitly ''turn off'' the spindle. The user is given two opportunities to cancel the job if that is not what he/she wants.
|-
|}

== Outstanding Maintenance Issues ==

=== Lack of True E-Stop ===
As shipped, the ShopBot PRS does not support an Emergency Stop. This could be hacked, but it runs the risk of damaging the machine if engaged in a non-emergency situation. Suggested solution: Installing a 10A double pole 24V coil DIN mount relay, and powering the coil via the 24V supply through a normally closed E-Stop button. One pole will disconnect the 63V stepper motor current. One pole will break the control signal that enables the VFD and will cause the VFD to brake to a stop.

=== Automatic Dust Collection ===
The ShopBot has +5V TTL outputs that could be used to trigger automatic dust collection (when the spindle goes live) and/or a warning light (when the gantry is enabled to move.)

=== Limit Switch Issues ===
Every time you start the ShopBot, it resets itself so that the limit switches are disabled! You can turn them on (if memory serves) with the Values -> Input Switch Assignment menu item. Limit switches are really useful - but they need to be enabled. When they are, they will stop manual jogging when the limit is hit (although pressing the key again will let you continue moving the gantry) and they will also stop a running job (but give you the option of ignoring the limits.)

I found a couple more problems when testing all the limits. When I took the gantry to X maximum, the dust collector hose pulled off! I put it back on, but I'm not sure how stable this is. Also, when I originally set the Y maximum and minimum, I wanted as much spindle travel as possible. But it appears that if you're at the Y max and move in the X direction, you can hit the middle support with the dust collector boot. We've got several inches Y travel beyond the nominal 48", so we may want to look into reducing this to clear the supports.

== Resources ==
[[File:ShopBot PSOne Post Processors.zip]] - Post Processors for Vectric Aspire and VCarve Pro 8.0 which includes the change to check that the spindle actually started.

[[File:ShopBot_TC_PS1-NO-SPIN.zip]] - Post Processors for Vectric Aspire and VCarve Pro which include changes to explicitly *disable* spinning

[[File:ShopBot PSOne Fusion 360 Post Processor.zip]] - Post Processor for Autodesk Fusion 360 which includes the change to check that the spindle actually started.

[[Category:Fabrication]]
[[Category:CNC]]
[[Category:Future Things Bus Data Sources]]

Sears Belt Sander

2018-08-17T14:55:18Z

Treiber: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner = PS1
|certification = yes
|hackable = NO
|model = 351.215132
|serial = SERIAL NUMBER
|arrived = 12/01/12
|doesitwork = yes
|contact = Ron Olsen
|where = [[Hot Metals]]
|value = DOLLARS
|image = Sears_belt_sander.jpg
}}
== General ==
* '''Belt Size: ''' 2 x 42"
* '''Disk Size: ''' 6"

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Mike Warot
|Danger Committee
|-
|Dave Schact
|Mike Warot
|-
|Barmey Ung
|Mike Warot
|-
|Michael Leinartas
|Adrianna McKinley
|-
|Todd Allen
|Ed Bennet
|-
|Kyle Bieneman
|Todd Allen
|-
|Scott Little
|Todd Allen
|-
|RJ Metzger
|Todd Allen
|-
|Giovanni Arroyo
|Todd Allen
|-
|Joao Santos
|Todd Allen
|-
|Nicholas Haldereman
|Todd Allen
|-
|Doorman Dave
|Todd Allen
|-
|Stephen Ioannou
|Todd Allen
|-
|Lucas Goossen
|Todd Allen
|-
|[[user:RogerMoore|Roger Moore]]
|Todd Allen
|-
|[[User:Mwilkens|Matt Wilkens]]
|Todd Allen
|-
|Rhonda Jackson
|Todd Allen
|-
|Matt Meshulam
|Todd Allen
|-
|Kevin Pulver
|Todd Allen
|-
|Andrew Camardella
|Todd Allen
|-
|Mike Coriale
|Todd Allen
|-
|Nick Naro
|Todd Allen
|-
|John Farmer
|Todd Allen
|-
|[[user:Jaypee|Jay Pee]]
|Todd Allen
|-
|Sam Paris
|Todd Allen
|-
|Jake Rush
|Todd Allen
|-
|Carolyn Ignacio
|Todd Allen
|-
|Andrew Sowa
|Todd Allen
|-
|Hilary Lee
|Todd Allen
|-
|Eric Slehofer
|Todd Allen
|-
|Sam Reicks
|Todd Allen
|-
|Tyler Matthew
|Todd Allen
|-
|Ben Bogler
|Todd Allen
|-
|Brittany Krawczyk
|Todd Allen
|-
|Cary Lahucik
|Todd Allen
|-
|Dan Baltudis
|Todd Allen
|-
|Ryan Taylor
|Everett Wilson
|-
|Andy Richardson
|Everett Wilson
|-
|Jeff Lawson
|Ron Olson
|-
|Hunter Koerner
|Ron Olson
|-
|Erik Wessing
|Ron Olson
|-
|Raj Perera
|Ron Olson
|-
|Jim Baker
|Ron Olson
|-
|Jonathan Levine
|Todd Allen
|9/23/15
|-
|Alejandro Drexler
|Todd Allen
|9/23/15
|-
|Burton Kent
|Eric Beauchamp
|9/24/15
|-
|Niko Hawley
|Ron Olson
|-
|Peter Letscher
|Todd Allen
|10/28/15
|-
|Jennie P
|Ron Olson
|11/18/15
|-
|Kurt Ziegel
|Ron Olson
|11/18/15
|-
|Jean Michel Crettaz
|Ron Olson
|-
|Sheila Miguez
|Everett Wilson
|2015/12/29
|-
|Brandon Love
|Michael Patton
|1/27/16
|-
|Connor Sullivan
|Tom Judge
|1/22/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
| Andrew Wingate
| Chris Iacullo
| July 6, 2017
|-
| Miriam Stevens
| Chris Iacullo
| July 27, 2017
|-
| Brandon Kennedy
| Daron Wooding
| 3/17/18
|-
|4/19/18|Gary Newhouse
|Eric Beauchamp
|4/26/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/11/18
|-
| Ruy Calderon
| Chris Iacullo
| 5/24/18
|-
| Jake Chaitkin
| Chris Iacullo
| 5/24/2018
|-
| Mark Treiber
| Chris Iacullo
| 8/16/2018
|-}

[[Category:Equipment]]
[[Category:Hot Metals]]

Ryobi 6" grinder

2018-08-17T14:55:05Z

Treiber: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner = PS:One
|certification = yes
|hackable = no
|model = MODEL NUMBER
|serial = SERIAL NUMBER
|arrived = DATE
|doesitwork = yes
|contact = CONTACT PERSON
|where = Hot Metals
|value = DOLLARS
|image = Ryobi grinder.jpg
|hostarea = Hot Metals
}}

'''This tool requires certification for use.'''
== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|[[user:kuroishi|David Koppel]]
|Adrianna McKinley
|
|-
|Michael Leinartas
|Adrianna McKinley
|
|-
|Kyle Bieneman
|Todd Allen
|
|-
|Scott Little
|Todd Allen
|
|-
|RJ Metzger
|Todd Allen
|
|-
|Giovanni Arroyo
|Todd Allen
|
|-
|Joao Santos
|Todd Allen
|
|-
|Nicholas Haldereman
|Todd Allen
|
|-
|Doorman Dave
|Todd Allen
|
|-
|Stephen Ioannou
|Todd Allen
|
|-
|Lucas Goossen
|Todd Allen
|
|-
|[[user:RogerMoore|Roger Moore]]
|Todd Allen
|
|-
|[[User:Mwilkens|Matt Wilkens]]
|Todd Allen
|
|-
|Rhonda Jackson
|Todd Allen
|
|-
|Matt Meshulam
|Todd Allen
|
|-
|Kevin Pulver
|Todd Allen
|
|-
|Andrew Camardella
|Todd Allen
|
|-
|Mike Coriale
|Todd Allen
|
|-
|Nick Naro
|Todd Allen
|
|-
|John Farmer
|Todd Allen
|
|-
|[[user:Jaypee|Jay Pee]]
|Todd Allen
|
|-
|Sam Paris
|Todd Allen
|
|-
|Jake Rush
|Todd Allen
|
|-
|Carolyn Ignacio
|Todd Allen
|
|-
|Andrew Sowa
|Todd Allen
|
|-
|Hilary Lee
|Todd Allen
|
|-
|Eric Slehofer
|Todd Allen
|
|-
|Sam Reicks
|Todd Allen
|
|-
|Tyler Matthew
|Todd Allen
|
|-
|Ben Bogler
|Todd Allen
|
|-
|Brittany Krawczyk
|Todd Allen
|
|-
|Cary Lahucik
|Todd Allen
|
|-
|Dan Baltudis
|Todd Allen
|
|-
|Shae Kurko
|Todd Allen
|
|-
|Glenn Powers
|Ron Olson
|
|-
|Ryan Neuman
|Ron Olson
|
|-
|Jim Baker
|Ron Olson
|
|-
|Jeff Lawson
|Ron Olson
|
|-
|James Villalpando
|Ron Olson
|
|-
|Peter Letscher
|Todd Allen
|10/28/15
|-
|Jean Michel Crettaz
|Todd Allen
|
|-
|Andrew Dalesandro
|Michael Patton
|1/10/16
|-
|Tony Johnson
|Michael Patton
|1/10/16
|-
|Connor Sullivan
|Tom Judge
|1/22/16
|-
|Matthew Quigley
|Michael Patton
|
|-
|Eugene Liokumovich
|Michael Patton
|9/10/16
|-
|Sam Olendorf
|Michael Patton
|9/10/16
|-
|Abel Greenwald
|Todd Allen
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Chris Iacullo
| 5/11/17
|-
| Andrew Wingate
| Chris Iacullo
| 7/6/17
|-
| Miriam Stevens
| Chris Iacullo
| 7/27/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Daron Wooding
|9/16/17
|-
| Chris Versteeg
| Chris Iacullo
| 1/11/18
|-
| Brandon Kennedy
| Daron Wooding
| 3/17/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/11/18
|-
| Mark Treiber
| Chris Iacullo
| 8/16/2018
|-}
[[Category:Hot Metals]]
[[Category:Shop Equipment]]

Miller Spectrum 2050

2018-08-17T14:54:27Z

Treiber: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|image=IMG 3518.JPG
|owner=PS:One
|model=Miller Spectrum 2050
|serial=KK065516
|arrived=September, 2016
|doesitwork=yes
|contact=Ron Olson
|where=Hot Metals
|certification=yes
|hackable=no
|value=$2000
|hostarea = Hot Metals
}}

==Documentation==

Donated by Anna Yu on 7/11/16
'''Terms of the donation''': The miller spectrum 2050 plasma cutter is donated to ps1 under the terms that machine '''cannot be sold, dispose of or donated to another organization.''' If PS1 do not wish to have it anymore for whatever reasons, it must be return to Anna Yu <annotatehere@gmail.com>

[[:File:Spectrum_2050.pdf| The Manual]]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|?
|Danger Committee
|
|-
|?
|Danger Committee
|
|-
| Jonathan Frink
| Chris Iacullo
| 4/19/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/11/18
|-
| Matt Maggio
| Chris Iacullo
| 5/10/18
|-
| Jake Chaitkin
| Chris Iacullo
| 5/24/2018
|-
|[[user:Brendanf|Brendan Fortune]]
|[[user:Tachoknight|Ron Olson]]
|19-May-2018
|-
|[[user:Wessing|Erik Wessing]]
|[[user:Tachoknight|Ron Olson]]
|5-June-2018
|-
| Nick Prorok
| Chris Iacullo
| 6/07/18
|-
| Daniel Willmott
| Chris Iacullo
| 6/21/18
|-
| Mark Treiber
| Chris Iacullo
| 8/16/2018
|-}

Millermatic 252

2018-08-17T14:53:58Z

Treiber: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|image=IMG_3785.jpg
|owner=PS:One
|model=Millermatic 252
|serial=MH170451N
|arrived=May, 2017
|doesitwork=yes
|contact=Ron Olson
|where=Hot Metals
|certification=yes
|hackable=no
|value=$3800
|hostarea = Hot Metals
}}

For safety tips and a general operational overview, see the article on PS1's [[MIG welders]].

==Official Information==
===Manual===
[https://www.millerwelds.com/files/owners-manuals/O230693L_MIL.pdf Manual for the Millermatic 252 on Miller Electric's site]
===Speeds and Feeds Guides===
[https://docs.google.com/spreadsheets/d/1CJpimBJEAodCKnKHwkKSR2MHZgksYvYgagw921qbFZo/edit?usp=sharing Speeds and feeds from the manual for this machine]
===Marketing Material===
[https://www.millerwelds.com/equipment/welders/mig-gmaw/millermatic-252-mig-welder-m00218 Glossy]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Ron Olson
|Danger Committee
|
|-
|Tom Judge
|Danger Committee
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Chris Iacullo
| May 11, 2017
|-
| Andrew Wingate
| Chris Iacullo
| July 6, 2017
|-
| Miriam Stevens
| Chris Iacullo
| July 27, 2017
|-
|[[User:Ekaj|Jacob Snyder]]
|Daron Wooding
|9/16/17
|-
|Daron Wooding
|Touly Phiachantharath
|-
| Nils Werner
| Daron Wooding
| Sep 16, 2017
|-
| Stephanie Pelzer
| Chris Iacullo
| 1/11/18
|-
| Chris Versteeg
| Chris Iacullo
| 1/11/18
|-
| Kari Danek
| Chris Iacullo
| 1/25/18
|-
| Aaron Vander Bee
| Daron Wooding
| 3/17/18
|-
| Molly Adamski
| Daron Wooding
| 3/17/18
|-
| Brandon Kennedy
| Daron Wooding
| 3/17/18
|-
| Jonathan Frink
| Chris Iacullo
| 4/19/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/11/18
|-
| Matt Maggio
| Chris Iacullo
| 5/10/18
|-
| Jake Chaitkin
| Chris Iacullo
| 5/24/2018
|-
|[[user:Brendanf|Brendan Fortune]]
|[[user:Tachoknight|Ron Olson]]
| 12-May-2018
|-
| Nick Prorok
| Chris Iacullo
| 6/07/18
|-
| Daniel Willmott
| Chris Iacullo
| 6/21/18
|-
| Zack Sasnow
| Chris Iacullo
| 7/26/18
|-
| Alex Zhu
| Chris Iacullo
| 7/26/2018
|-
| Mark Treiber
| Chris Iacullo
| 8/16/2018
|-}

[[Category:Welder]]
[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Hot Metals]]

Lincoln Electric 3200HD

2018-08-17T14:53:40Z

Treiber: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner = PS:One
|certification = yes
|hackable = no
|model = Weld Pak 3200HD
|arrived = 2015-04-27
|doesitwork = yes
|where = Hot Metals
|value = $340
|contact = Ron Olson
|image = IMG_1583.JPG
|hostarea = Hot Metals
}}

Essentially "a hot melt glue gun for metals". It releases 75% argon / 25% CO2 gas as you weld to prevent oxidation of the metal. You're melting the metals you're joining, and adding a bead as well.

For safety tips and a general operational overview, see the article on PS1's [[MIG welders]].

== Status ==

Standard electric power plug has been replaced with a NEMA 5-20 type plug, plugs right into the wall socket there but won't plug into a power strip or extension cord.

== Some Info ==
http://www.4x4review.com/lincoln-eletrics-weld-pak-3200-hd-mig-welder/

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Authorized Member Keon Turner
! Authorized By
! Date
|-
|Alejandro Drexler
|Ron Olson
|-
|Chris Agocs
|Ron Olson
|-
|Yousef Zaffarkhan
|Ron Olson
|-
|Andy Larkin
|Ron Olson
|-
|Samuel Sion
|Ron Olson
|-
|Lauren Svedman
|Ron Olson
|-
|Aaron Carlock
|Ron Olson
|-
|Greg Kudlacz
|Ron Olson
|-
|Daniel Maziarz
|Ron Olson
|-
|Connor Sullivan
|Tom Judge
|-
|Keith Couture
|Ron Olson
|-
|Jordan Montes
|Ron Olson
|-
|Ken Burkhardt
|Ron Olson
|-
|Sam Olendorf
|Ron Olson
|-
|Eugene Liokumovich
|Ron Olson
|-
|[[user:mkeith|Matt Keith]]
|Ron Olson
|-
|[[user:panchan99|Juan Ramos]]
|Jeremy Bloyd-Peshkin
|-
|[[user:smash|Ashley Matrisciano]]
|Jeremy Bloyd-Peshkin
|-
|[[user:smash|Burton Kent]]
|Jeremy Bloyd-Peshkin
|-
|Brian Cuocci
|Ron Olson
|-
|Sam Paris
|Ron Olson
|-
|Clarence Bartenhagen
|Chris Iacullo
|-
|[[user:Pedrosk|Ed Breuer]]
|Chris Iacullo
|Feb 2017
|-
|Matthew Kim
|Chris Iacullo
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Chris Iacullo
| May 11, 2017
|-
| Miriam Stevens
| Chris Iacullo
| July 27, 2017
|-
|Daron Wooding
|Touly Phiachantharath
|-
|Wally Ibrahim
|Daron Wooding
|10/21/17
|-
| Stephanie Pelzer
| Chris Iacullo
| 1/11/18
|-
| Chris Versteeg
| Chris Iacullo
| 1/11/18
|-
| Kari Danek
| Chris Iacullo
| 1/25/18
|-
|Mike Ice
|Daron Wooding
|2/17/18
|-
| Brandon Kennedy
| Daron Wooding
| 3/17/18
|-
| Aaron Vander Bee
| Daron Wooding
| 3/17/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/11/18
|-
| Lucas Goossen
| Daron Wooding
| 4/28/18
|-
| Nick Prorok
| Chris Iacullo
| 6/07/18
|-
| Mark Treiber
| Chris Iacullo
| 8/16/2018
|-}

[[Category: Hot Metals]]

Hot Metals Belt Sander

2018-08-17T14:53:00Z

Treiber: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner = PS:One
|hostarea = Hot Metals
|certification = yes
|hackable = no
|model = TLS-362
|serial = SERIAL NUMBER
|arrived = 11/2016
|where = Hot Metals, rack wall
|doesitwork = yes
|contact = [[:Category:Hot Metals|Hot Metals Area Host]]
|value = $500
|image = TLS-MT362 Multitool-Bench-Grinder1 LRG.jpg
}}

This is a brand new page. It needs an equipment template applied to it!

If you know more about this machine, please update this wiki page and make an equipment label for it.

Information to gather:

* status
* how to get authorized
* photo of the thing
* make and model, serial number
* type of electrical power required
* parts numbers or links for ordering consumables (belts!)
* link to service manuals, operator's manuals
* who owns it?

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
| Sam Paris
| Daron(?)
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Chris Iacullo
| May 11, 2017
|-
| Andrew Wingate
| Chris Iacullo
| July 6, 2017
|-
| Miriam Stevens
| Chris Iacullo
| July 27, 2017
|-
| Nils Werner
| Daron Wooding
| September 16, 2017
|-
|[[User:Ekaj|Jacob Snyder]]
|Daron Wooding
|9/16/17
|-
| Stephanie Pelzer
| Chris Iacullo
| 1/11/18
|-
| Chris Versteeg
| Chris Iacullo
| 1/11/18
|-
| Aaron Vander Bee
| Daron Wooding
| 3/17/18
|-
| Brandon Kennedy
| Daron Wooding
| 3/17/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/11/18
|-
| Matt Maggio
| Chris Iacullo
| 5/10/18
|-
| Ruy Calderon
| Chris Iacullo
| 5/24/18
|-
| Jake Chaitkin
| Chris Iacullo
| 5/24/2018
|-
| Nick Prorok
| Chris Iacullo
| 6/07/18
|-
| Daniel Willmott
| Chris Iacullo
| 6/21/18
|-
| Kevin Wendt
| Abel Greenwald
| 7/6/2018
|-
| Zack Sasnow
| Chris Iacullo
| 7/26/2018
|-
| Alex Zhu
| Chris Iacullo
| 7/26/2018
|-
| Mark Treiber
| Chris Iacullo
| 8/16/2018
|-}

[[Category: Hot Metals]]

DeWalt Chop Saw

2018-08-17T14:52:41Z

Treiber: /* List of Currently Authorized Users */

{{Template:EquipmentPage
|owner=PS1
|model=14" Chop Saw
|serial=?
|arrived=5/10/2015
|doesitwork=yes
|contact=Ron Olson
|where=Hot Metals
|certification=yes
|hackable=no
|value=$200
|image=IMG_2204.JPG
|hostarea = Hot Metals
}}<br />
== Status ==
This tool is currently broken - the trigger does not work and the saw will start up as soon as it is plugged in.
Exercise extreme caution.
== Authorization ==
Authorization is done via the Tier 1 class
== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Hunter Koerner
|Ron Olson
|6/14/15
|-
|Raj Perera
|Ron Olson
|6/14/15
|-
|-
|Erik Wessing
|Ron Olson
|
|-
|Aji Slater
|Ron Olson
|7/12/15
|-
|Jim Baker
|Ron Olson
|
|-
|Todd Allen
|Ron Olson
|
|-
|Tom Boeman
|Ron Olson?
|8/30/15
|-
|Jonathan Levine
|Todd Allen
|9/23/15
|-
|Lauren Svedman
|Ron Olson
|
|-
|Niko Hawley
|Ron Olson
|
|-
|Glenn Powers
|Ron Olson
|10/18/15
|-
|Aaron Carlock
|Ron Olson
|11/18/15
|-
|Jennie P
|Ron Olson
|11/18/15
|-
|Kurt Ziegel
|Ron Olson
|11/18/15
|-
|Mike Forkan
|Ron Olson
|11/18/15
|-
|Marcin Ignasiak
|Ron Olson
|
|-
|Greg Kudlacz
|Ron Olson
|
|-
|Elizabeth Arundel
|Ron Olson
|10/18/15
|-
|Daniel Maziarz
|Ron Olson
|
|-
|Jean Michel Crettaz
|Ron Olson
|
|-
|Dafe Hughes
|Ron Olson
|12/16/15
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/15
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/15
|-
|Andrew Dalesandro
|Michael Patton
|1/10/16
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Tony Johnson
|Michael Patton
|1/10/16
|-
|Brandon Love
|Michael Patton
|1/27/16
|-
|Connor Sullivan
|Tom Judge
|1/22/16
|-
|Keith Couture
|Ron Olson
|3/1/16
|-
|Adam Stafford
|Michael Patton
|4/17/16
|-
|Jordan Montes
|Ron Olson
|5/4/16
|-
|Carlos Garcia
|Michael Patton
|6/5/16
|-
|Ian Monroe
|Michael Patton
|6/29/16
|-
|Ken Burkhardt
|Andrew Carmadella
|
|-
|Joe Iklov
|Michael Patton
|6/29/16
|-
|Jim Brink
|Michael Patton
|6/29/16
|-
|Frank Bowles
|Michael Patton
|6/29/16
|-
|Eugene Liokumovich
|Michael Patton
|
|-
|Matthew Quigley
|Michael Patton
|
|-
|Sam Olendorf
|Michael Patton
|
|-
|Brian Cuocci
|Michael Patton
|10/5/16
|-
|[[User:ajasani|Ashish Jasani]]
|Michael Patton
|11/7/16
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Chris Iacullo
| 5/11/17
|-
| Andrew Wingate
| Chris Iacullo
| 7/6/17
|-
| Miriam Stevens
| Chris Iacullo
| 7/27/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Daron Wooding
|9/16/17
|-
|Jacqueline Villa
|Maria Miller
|10/3/17
|-
|Daron Wooding
|Nils Werner
|9/16/17
|-
|Wally Ibrahim
|Daron Wooding
|10/21/17
|-
| Stephanie Pelzer
| Chris Iacullo
| 1/11/18
|-
| Chris Versteeg
| Chris Iacullo
| 1/11/18
|-
| Kari Danek
| Chris Iacullo
| 1/25/18
|-
| Mike Ice
| Daron Wooding
| 2/17/18
|-
| Aaron Vander Bee
| Daron Wooding
| 3/17/18
|-
| Brandon Kennedy
| Daron Wooding
| 3/17/18
|-
| Jonathan Frink
| Chris Iacullo
| 1/25/18
|-
|Gary Newhouse
|Eric Beauchamp
|4/26/18
|-
| Wayne Hendryx
| Chris Iacullo
| 4/11/18
|-
| Matt Maggio
| Chris Iacullo
| 5/10/18
|-
| Jake Chaitkin
| Chris Iacullo
| 5/24/2018
|-
| Kevin Wendt
| Abel Greenwald
| 7/6/2018
|-
| Zack Sasnow
| Chris Iacullo
| 7/26/2018
|-
| Alex Zhu
| Chris Iacullo
| 7/26/2018
|-
| Mark Treiber
| Chris Iacullo
| 8/16/2018
|-}
[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Hot Metals]]