PS:1 Wiki Dev - User contributions [en]

Shopbot PRS CNC router

2017-12-09T22:27:53Z

Wittnl:

{{Template:EquipmentPage
|owner = PS:One
|serial = TBD.
|certification = yes
|hackable = no
|model = Shopbot PRS #10108 96-48
|arrived = 2014
|image = Shopbot.jpg
|doesitwork = yes
|contact = [[CNC|CNC Area Host]]
|where = TBD
|value = $16000
|hostarea = CNC
}}
= ShopBot PRS #10108 96-48 =

* [http://www.shopbottools.com/mProducts/prSstandard.htm OEM website and specs]
* Nominal Cutting Area 96"x 48"x 6" (2.44m x 1.22m x .15m)
* Total Movement Area 102" x 50" x 8" (2.59m x 1.27m x .20m)

The spindle uses ER25 collets. These eventually wear out, so check before using them. Collets are a durable expendable.

Some people buy their own collets. There are a number of suppliers of collets, nuts, and related accessories. [http://www.techniksusa.com/ Techniks] and [http://www.shars.com/ Shars] are both brands that have been recommended by experienced CNC users, although other brands may also be of equivalent price and quality:

* [http://www.shars.com/1-4-ultra-precision-5-micron-er25-collet Shars ER25 Collet Ultra Precision 5 Micron]
* [https://www.ebay.com/itm/TECHNIKS-1-4-SUPER-PRECISION-ER25-COLLET-0002-ACCURACY-CNC-CHUCK-MILL-/130701349603?hash=item1e6e6852e3 Techniks 1/4" Super Precision ER25 Collet .0002 Accuracy]
* [https://www.toolstoday.com/cnc-high-precision-spring-collets-for-er25-tool-holder.html?variantids=11644,0&keywords=CO-286 Amana CNC High Precision Spring Collets for ER25 Tool Holder]
* [https://www.amazon.com/HHIP-3900-5215-ER-25-Spring-Collet/dp/B01ABWS9IG/ HHIP 3900-5215 ER-25 Spring Collet, 1/4"]
* [https://www.amazon.com/Dorian-Tool-Alloy-Precision-Collet/dp/B00CB14HXW/ Dorian Tool ER25 Alloy Steel Ultra Precision Collet, 0.236" - 0.276" Hole Size]

=Status history=
August 2017: Dust collection system out of commission.

June 2017: There is an intermittent break in the wiring for the Z-axis Zero Plate. Check for continuity before using (the #1 input should light up on screen when you touch the contacts together). It usually works near the front of the table, but not halfway back. This will get fixed eventually, but it's a good idea to be in the habit of checking.

12/27/16 - Fixed Shopbot x-axis homing. The cable had been pulled on hard enough that some of the conductors broke inside the cable. It has been spliced, soldered, and heatshrinked back together.

= How to Get Authorized =

'''Authorization for this tool by authorized proctors only.''' This means you cannot get authorized by just anyone who is already authorized. You can only get authorized by a few people, the proctors listed below.

Authorization sessions are scheduled roughly monthly. Check the [https://www.meetup.com/Pumping-Station-One/events/ Meetup calendar] for upcoming authorizations. If no ShopBot sessions are currently scheduled, ask on the [https://groups.google.com/group/pumping-station-one/ Google Group].

Be aware that this authorization consists of two parts; the first session is a classroom session that will cover the software required and introduce you to the essential settings and chip-load calculation, and the second part, scheduled separately, is a hands-on class.

== Authorized Proctors ==
{| class="wikitable" border="1"
|-
|Elizabeth Koprucki
|Danger Committee
|-
|Bart Dring
|Danger Committee
|-
|Ryan Pierce
|Danger Committee
|-
|Nathan Ellis
|Danger Committee
|-
|Michael Skilton
|Danger Committee
|-
|Khoi Nguyen
|Michael Skilton
|-
|Andrew Camardella
|Elizabeth Koprucki
|-
|Matt Meshulam
|Andrew Camardella
|-
|}

== How to Become an Authorized Proctor ==
Get an ok from the area host. Successfully run an authorization supervised by an authorized proctor.
It's recommended that initial authorizations be limited to 2 or less.

= Documentation =

[[File:Shopbotassembly.pdf|Shopbotassembly.pdf]]

[[File:Squaringshopbot.pdf|Squaring the ShopBot]]

[[File:Programming_handbook.pdf|Programming Handbook]]

[[File:PRS Maintenance Schedule.pdf|Maintenance Schedule]]

[[File:ShopBot_USB_Connection_Troubleshoot.pdf]] - USB Troubleshooting Guide

[[File:ShopBot_Tech_Support_FAQ_2016_09_12.pdf]] - Tech Support FAQ

[[File:SBG00142 User Guide 2013 05 01.pdf|SBG00142 User Guide 2013 05 01.pdf]] - User Guide

[[File:B17P.763_Schematic.pdf]] - Omer Nail Gun Documentation

[http://www.shopbottools.com/ShopBotDocs/files/quick%20start%20guide%202013%2007%2023.pdf QuickStart]

X, Y, Z probe: https://pumpingstationone.org/2015/09/xyz-finder-for-the-shopbot/

[http://drshopbot.com/index.php?title=Main_Page "Dr Shopbot" wiki]

[http://drshopbot.com/index.php?title=MaintainingConnection "Maintaining Connections"]

== Tutorials ==
[https://www.youtube.com/watch?v=xWCZfYHOYWw Part 1 of our Shopbot Authorization] - This is available as a refresher only. You still need to go to the class when it happens to get access to the hands-on Part 2.

[http://www.woodguide.org/files/2014/07/CNCrouter_bit_basics.pdf Router Bit Basics for CNC - VERY USEFUL]

[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Threads on Member List]

[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Forum]

[https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ Overview of Cut Load calcualtions for setting bit feed and speed rates]

= Software Tool Chain =
*Illustrator
*Inkscape
*Vectric Aspire
**Allows for 2D and 3D linework and toolpath creation
**Only available on the Shapeoko Computer
*Vectric V-Carve Makerspace Edition
** http://www.vectric.com/products/vcarve/trial.html
**Allows for 2D linework and toolpath creation
**Allows at home use of V-Carve - output only at PS1
**Our Makerspace Code is: E4793-F6472-BB9E5-9B114-3FEEB-73649-16F4F
*Autodesk Fusion 360
**The ShopBot computer does not have this and may not be fast enough to run it.
**You '''MUST''' use the custom post-processor below. Otherwise, you will bypass the safety check to make sure the spindle really is running!
**For local '''Windows''', to install this on your local computer:
***Unzip and install this in C:\Users\YourName\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts
***Note that AppData is often a hidden folder!
***Inside Fusion 360, when you select Actions / Post Process, under Configuration Folder, hit Setup and select Use Personal Posts.
**For local '''Mac'''
*** Unzip and install in Macintosh HD> Users> USERNAME> Autodesk> Fusion 360 CAM> Posts
*** In Fusion 360, when you select Actions > Post Process, under Settings select Personal Posts for the Source
**For '''Cloud'''
*** Open Fusion 360 and navigate to Libraries > Assets in the Data Panel.
*** Double click the Assets > CAMPosts folder to enter it.
*** Use the Upload button to upload the desired post processor from your local machine to the Assets > CAMPosts folder. This will upload the post to the cloud and allow you to access it anywhere you may login to your Fusion 360 account through My Cloud Posts.
*** After enabling cloud libraries in Fusion 360, you will be able to access your cloud post processor library by setting the Configuration Folder (Windows) or Source (Mac) to My Cloud Posts. Both of these dialog boxes are shown below. You will then be able to select the Cloud post you uploaded in the Post Configuration field (Windows) or the Post Processor field (Mac).
====Chip Load Calculation====
*[http://www.pdsspindles.com/engineering-speeds Bit Parameter Overview by PDS Spindles]
*[http://www.monstertool.com/monster_tool_calculators.html Monster Tools Chip Load Calculator]
*[http://www.pdsspindles.com/admin/modules/page_editor/uploads/image/Chip%20load%20for%20common%20tool%20diameters%20(Inches).jpg Chip Load Chart by PDS Spindles]
*[https://groups.google.com/forum/#!searchin/pumping-station-one/makerspace$20edition/pumping-station-one/cTwfUHxESjU/7m_lI8UWCgAJ How to install Makerspace Version]

== User Tips & Troubleshooting Reports ==
[http://www.sgstool.com/PDF-speedfeeds/SGS-Speeds-Feeds-GP.pdf Some feed and speed recommendations for small bits]

Add your experiences with feeds and speeds or other tips here:
[[Shopbot_User_Tips]]

Add troubleshooting reports here:
[[Shopbot_Troubleshooting_Reports]]

=== Materials ===

* [[Shopbot_PRS_CNC_router/Aluminium|Aluminium]]
* [[Shopbot_PRS_CNC_router/Brass|Brass]]
* [[Shopbot_PRS_CNC_router/Wood|Wood]]

== Authorization Checklist ==

This is here as a checklist for proctors to follow when authorizing people. It can also help remind you of things after you are authorized. Just reading this does not authorizing you.

* How to get authorized
** Watch [http://www.meetup.com/Pumping-Station-One/ the meetup group] for a recurring class on the second Thursday and last Sunday of the month. Sometimes check [https://groups.google.com/forum/#!forum/pumping-station-one the forum] for announcements or ask on the forum if no announcements have been made for a few weeks.

* Authorization group size
** There is no cap to the software instruction preceding the machine usage portion of the class. If you come to this portion it is easier to get fully authorized at a later date.
** 3 machine users - each person will run a job (~1/2 hr each) and everyone will assist each other in completing a job profile and pocket cut. You must be present for the entire authorization

* Safety
** Safety Glasses
** Hearing Protection
** Dust Protection

* What can go wrong (and what to do)

* How does machine work
** Axes
** Motors
** Spindle

* Daily Maintenance
** Spindle bearing warm up.
*** The "C5" warm up routine should be run on the first job of the day. It runs the spindle at 3 speeds for 3 minutes each to warm up the bearings. (When it doubt, warm it up)

* Extended Maintenance
** See maintenance schedule file under documentation.
** Grease the racks
** Use Grease type: Manual states any type is safe there is some in the draw

* Machine Control
** Turn on sequence
*** Log into computer
*** Turn on Shopbot big red and yellow twist switch (see zeroing below)
*** Insert Key and turn to "engaged" position.
*** The VDF should light up, the spindle fan should be on.
*** Start "Shopbot 3" program.
*** Open Tools...Spindle RPM Control menu (to allow RPM control)
**** Make sure collet is tightened or no tool or nut is installed
**** Run the C5 warm up routine
** Jogging
*** Keypad
*** Arrow Keys + Page Up, Page Down (ctrl for fast jog)

* CAM Software
** Vectric V Carve
** Just the basics...separate class for advanced V Carve.
** Online videos

* Running your Job
** Zeroing X & Y
*** With machine off slow push gantry towards X0 until it hits hard stops (optional)
*** Turn on big red switch while still holding gantry.
*** Jog machine away from X0 Y0 so machine will find switches
*** Click X, Y zero button.
** Zeroing Z (top of work piece)
*** Jog over your work piece
*** Place Z zero plate on work piece under the bit
*** Place clip on bit
*** Test connection by touching plate to bit and watch for light #1 to light
*** Click the Z 0 button (it will touch off twice!!!)
*** If Z is critical, you may want to verify that your bit has been zeroed properly by using a "MZ,0" command over the surface you have zeroed the bit to. Repeat zeroing if not correct.

* Waste Board and clamping

* Collets, Bits, Feeds and Speeds
** Feeds and Speeds
*** Use a Cut Load Calculator to determine which feeds and speeds you should be using for your specific bits. An overview is avaialble at: [https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ]
** Collets
*** We currently have collets for 1/2, 1/4, 3/16 and 1/8" shank bits.
*** Try to keep them clean and store them away from dust between uses. Dust between the gaps will produce runout. The drawer mounted under the Shopbot is the right place to store these items.
*** If the collet nuts are not threading smoothly try cleaning the threads with a small brush, spindle threads as well.
** Bits
*** Use bits designed for the material you are cutting. Don't just steal a bits from the Bridgeport. They won't do a good job and will probably overheat.
*** For cutting out things, use the smallest appropriate bit. Using a 1/2" bit to cutout will just create a lot of mess.

* ShopBot should not be used for...
** Metals other than aluminum
** Cutting anything that requires coolant or lubricant (it will ruin the waste board)
** Ripping lumber (use the table saw)
** Thickness Planning (Use the planner if you can)
** Drilling holes with drill bits (a small end mill works better)

* How to leave the machine (be excellent)
** Machine
*** Home the machine to X0, Y0
*** Turn off both switches
*** Remove Key
*** Remove bit and collet.
*** Place both collet wrenches on top of electronics box
*** clean up work area
*** Smooth out waste board if you puckered it at all.
*** Check if the dust collector needs to be emptied

** Post a picture on our [[Blog]] please!

== Use checklist ==

PS1 is experimenting with the use of checklists to encourage the safe use and proper care of tools in the workspace. The latest version of the [[checklists]] for this tool is stored as a [https://docs.google.com/document/d/1L78Rr_T8vhV8XZLRReKIWYXAyOnS8CLfJmAxehVeThU/edit Google Doc] that can be edited by anyone. If you make changes, update the effective date at the bottom of the document. Print a new copy, and replace the old one.

Physical checklists are necessarily constrained in length. Following is a more extensive pre-flight checklist:

* Did you home the machine?
* Is the dust collect gate open?
* Are you sure you have the right X, Y orientation for your file and material?
* Did you set the proper X,Y zero for your work piece on the Shopbot.
* Is the correct bit installed and tight?
* Is the key in and turned on?
* Is the dust skirt set right so it does not get smashed.
* Is Z zero set to the work top?
* Are the touch plate and clip returned?
* Is the material properly secured?
* Open the Shopbot spindle control dialog (Tools > Spindle RPM Control)
* Safety glasses, hearing protection on.
* Start the job with the E-Stop ready to hit.
* Turn on dust collector ( I like to wait so I can hear that things sound right on the shopbot before turning on the collector)

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Elizabeth Koprucki
|Danger Committee
|
|-
|Bart Dring
|Danger Committee
|
|-
|Ryan Pierce
|Danger Committee
|
|-
|Nathan Ellis
|Danger Committee
|
|-
|Michael Skilton
|Danger Committee
|
|-
|Arturo Duarte
|Bart
|
|-
|Derek Bever
|Bart
|
|-
|Everett
|Bart
|
|-
|Vincent Colombo
|Bart
|
|-
|[[User:justin|Justin T. Conroy]]
|Bart
|
|-
|Hugh Sato
|Bart
|
|-
|Sergey Nekrasov
|Bart
|
|-
|Valerie Moore
|Bart
|
|-
|Patrick Schless
|Bart
|
|-
|Tom Forajter
|Bart
|
|-
|Todd Allen
|Michael Skilton
|
|-
|[[User:RogerMoore|Roger Moore]]
|Bart
|
|-
|Tim Saylor
|Bart
|
|-
|Hef
|Bart
|
|-
|Jeff McBride
|Bart
|
|-
| Maxwell ?
| Michael Skilton
|
|-
|Samuel Swope
|Michael Skilton
|
|-
| Khoi Nguyen
|Michael Skilton
|
|-
|Brian Chojnowski
|Michael Skilton
|
|-
|Josh Cooper
|Bart
|
|-
|Andrew Camardella
|Bart
|
|-
|Adam Glick
|Bart
|
|-
|Yehuda Braun
|Bart
|
|-
| Jeff Kantarek
| Michael Sklton
|
|-
| Justin Miles
|Michael Skilton
|
|-
|Will Garza
|Michael Skilton
|
|-
|Clarence Risher
|Michael Skilton
|
|-
|[[User:ericbeau|Eric Beauchamp]]
|Michael Skilton
|
|-
|[[User:Jason|Jason]]
|Michael Skilton
|
|-
|Eric Stein
|Bart
|
|-
|Colin Parsons
|Bart
|
|-
|David Ditzler
|Bart
|
|-
|Ray Doeksen
|Bart Dring
|
|-
|Ron Bean
|Khoi Nguyen & Michael Skilton
|
|-
| Thomas Wright
|Khoi Nguyen & Michael Skilton
|
|-
|David Morton
|Bart Dring
|
|-
|Ron Olson
|Bart Dring
|
|-
|Kyle Bieneman
|Bart Dring
|
|-
|[[User:amishhammer|Tom Judge]]
|Michael Skilton
|
|-
|Bryan Gleason
|Michael Skilton
|
|-
|Dave Schact
|Ryan Pierce
|
|-
|Chris Agocs
|Andrew Camardella
|
|-
|[[user:kuroishi | Doorman Dave ]]
|Andrew Camardella
|
|-
|Alec Weege
|Andrew Camardella
|
|-
|Sam Reicks
|Andrew Camardella
|
|-
|Touly Phiachantharath
|Andrew Camardella
|
|-
|Lucas Goossen
|Andrew Camardella
|
|-
|[[user:Tina|Tina C]]
|Andrew Camardella
|
|-
|Ryan Neuman
|Andrew Camardella
|
|-
|Dan Loeser
|Andrew Camardella
|
|-
|Ben Bogler
|Andrew Camardella
|
|-
|Erin Banwell
|Ryan Pierce
|
|-
|Brad Rios
|Ryan Pierce
|
|-
|Aaron Carlock
|Andrew Camardella
|
|-
|James Villalpando
|Andrew Camardella
|
|-
|Connor Jansen
|Andrew Camardella
|
|-
|Tait Leswing
|Bart
|
|-
|Raj Perera
|Khoi Nguyen
|
|-
|Keith Hultman
|Andrew Camardella
|
|-
|David Srebro
|Andrew Camardella
|
|-
|[[user:Wessing | Erik Wessing ]]
|Andrew Camardella
|
|-
|Leeswann Bolden
|Andrew Camardella
|
|-
|Josh Myers
|Andrew Camardella
|
|-
|Kurt Ziegel
|Andrew Camardella
|
|-
|Glenn Powers
|Andrew Camardella
|
|-
|[[User:mqudsi|Mahmoud Al-Qudsi]]
|Andrew Camardella
|
|-
|Casey Olson
|Khoi
|
|-
|Mike Jones
|Andrew Camardella
|
|-
|Aaron Feigen
|Andrew Camardella
|
|-
|Jim Baker
|Andrew Camardella
|
|-
|Eric Reusche
|Khoi Nguyen
|
|-
|Ralph Brendler
|Andrew Camardella
|
|-
|John McDonald
|Andrew Camardella
|
|-
|Alex Al-Hamdan
|Andrew Camardella
|
|-
|Eugene Liokumovich
|Andrew Camardella
|
|-
|Randal Cox
|Andrew Camardella
|
|-
|Simon Pyle
|Andrew Camardella
|
|-
|Jean Michel Crettaz
|Andrew Camardella
|
|-
|Brian Zable
|Andrew Camardella
|
|-
|Daylan Dufelmeier
|Andrew Camardella
|
|-
|Steve Kruse
|Matt Meshulam
|
|-
|Mike Mandrea
|Andrew Camardella
|
|-
|Jeff Zelnio
|Andrew Camardella
|
|-
|Aaron Stoddart
|Matt Meshulam
|
|-
|Koun Park
|Matt Meshulam
|
|-
|Dan Baltudis
|Matt Meshulam
|
|-
|Curtiss Cooke
|Matt Meshulam
|
|-
|Jeannine Chuchan
|Matt Meshulam
|
|-
|Brennan Koziarz
|Matt Meshulam
|
|-
|Brandon Love
|Matt Meshulam
|
|-
|Mike Vitale
|Matt Meshulam
|
|-
|Emma Purola
|Matt Meshulam
|
|-
|Chris Kohl
|Matt Meshulam
|
|-
|Daniel Sojka
|Matt Meshulam
|
|-
|Naguib Azab
|Matt Meshulam
|
|-
|Mark Zumwalt
|Matt Meshulam
|
|-
|Joseph Juhnke
|Andrew Camardella
|
|-
|Alex Berkowitz
|Andrew Camardella
|
|-
|Andy Muhic
|Matt Meshulam
|
|-
|Adam Stein
|Matt Meshulam
|
|-
|John Farmer
|Matt Meshulam
|
|-
|Joshua Havenga
|Matt Meshulam
|
|-
|[[user:mct|McTavish McArdle]]
|Matt Meshulam
|
|-
|Frank Bowles
|Matt Meshulam
|
|-
|Joe Iklov
|Matt Meshulam
|
|-
|Matthew Quigley
|Matt Meshulam
|
|-
|Derwin Umali
|Andrew Camardella
|
|-
|Doug Mahoney
|Matt Meshulam
|
|-
|Rob Robinson
|Matt Meshulam
|
|-
|Dan Sloboda
|Matt Meshulam
|
|-
|Jacob Collins
|Matt Meshulam
|
|-
|Donald Wells
|Matt Meshulam
|
|-
|[[user:jim|Jim Brink]]
|Matt Meshulam
|
|-
|[[user:mkeith|Matt Keith]]
|Matt Meshulam
|
|-
|[[user:vmorris|Victoria Morris]]
|Matt Meshulam
|
|-
|[[user:bobsabayesian|Bob Loos]]
|Matt Meshulam
|
|-
|[[user:muthpete|Peter Muth]]
|Matt Meshulam
|
|-
|[[user:guijemont|Guillaume Emont]]
|Matt Meshulam
|
|-
|[[user:erikthefunk|Erik Funkhouser]]
|Matt Meshulam
|
|-
|[[user:mrashes|Max Rashes]]
|Matt Meshulam
|
|-
|[[user:panchan99|Juan Ramos]]
|Matt Meshulam
|
|-
|[[user:Justjoe|Joe Dowling]]
|Matt Meshulam
|
|-
|[[user:smash|Ashley Matrisciano]]
|Matt Meshulam
|
|-
|Ryan Kapp
|Matt Meshulam
|
|-
|Idris Raja
|Matt Meshulam
|
|-
|[[user:Dannyblanchard|Danny Blanchard]]
|Matt Meshulam
|
|-
|Aaron Mintz
|Matt Meshulam
|
|-
|[[user:ianstubbs|Ian Stubbs]]
|Matt Meshulam
|
|-
|[[user:skynaya|Skylar Nova]]
|Matt Meshulam
|
|-
|Chris Ruhland
|Matt Meshulam
|
|-
|[[user:Jaypee|Jay Pee]]
|Matt Meshulam
|
|-
|[[user:Ryanmafi|Ryan Fiebing]]
|Matt Meshulam
|
|-
|[[user:sblaszak|Shawn Blaszak]]
|Matt Meshulam
|
|-
|[[user:tonyiacullo|Tony Iacullo]]
|Matt Meshulam
|
|-
|Mark Haughey
|Matt Meshulam
|
|-
|Chris Iacullo
|Matt Meshulam
|
|-
|Ian Monroe
|Matt Meshulam
|
|-
|Ashish Jasani
|Matt Meshulam
|
|-
|Kurt Gilman
|Matt Meshulam
|
|-
|Abel Greenwald
|Matt Meshulam
|
|-
|Vaidotas (Vai) Staugaitis
|Matt Meshulam
|
|-
|Leo Battikhi
|Matt Meshulam
|
|-
|Matt Schaid
|Matt Meshulam
|
|-
|Jamie Vollmer
|Matt Meshulam
|
|-
|Bhairavi Warke
|Matt Meshulam
|
|-
|Denis Kuznetsov
|Matt Meshulam
|
|-
|Brian Carstensen
|Matt Meshulam
|
|-
|Rob Dumas
|Matt Meshulam
|
|-
|Mark Weiser
|Matt Meshulam
|
|-
|Tom Burtonwood
|Matt Meshulam
|
|-
|Steve Madonna
|Matt Meshulam
|
|-
|Jason Araujo
|Matt Meshulam
|
|-
|Bruce Alan Mace
|Matt Meshulam
|
|-
|Molly Adamski
|Matt Meshulam
|
|-
|Jeremy Shaw
|Matt Meshulam
|
|-
|Sam Chen
|Matt Meshulam
|
|-
|John McBride
|Matt Meshulam
|
|-
|Adomas Tautkus
|Matt Meshulam
|
|-
|Tim Buckley
|Matt Meshulam
|
|-
|Martina Josimovska
|Matt Meshulam
|
|-
|James Jacobs
|Matt Meshulam
|
|-
|George Shaw
|Matt Meshulam
|
|-
|David Earl
|Matt Meshulam
|
|-
|[[User:pedrosk| Eduard Breuer]]
|Matt Meshulam
|
|-|-
|Matthew Kim
|Matt Meshulam
|
|-
|Corey Peoples
|Matt Meshulam
|
|-
|Paul Graham
|Matt Meshulam
|
|-
|Matt Grunstad
|Matt Meshulam
|
|-
|Rolf Scheidt
|Matt Meshulam
|
|-
|Arjun Sharma
|Matt Meshulam
|
|-
|Chris Laurent
|Matt Meshulam
|
|-
|[[User:dwlocks|Dan Locks]]
|Matt Meshulam
|
|-
|Zack Sasnow
|Matt Meshulam
|
|-
|Ben Stringer
|Matt Meshulam
|
|-
|[[User:Ekaj|Jacob Snyder]]
|Matt Meshulam
|8/24/17
|-
|James Beck
|Matt Meshulam
|9/13/17
|-
| Sam Gates
|Matt Meshulam
|10/01/17
|-
| Tommy TBones Cramer
|Matt Meshulam
|09/24/17
|-
| tee
|Matt Meshulam
|10/26/17
|-
|[[User:wittnl|Nathan Witt]]
|Matt Meshulam
|2017-12-09
|}

If you have been authorized but cannot log in, request to be added to the "ShopBot Authorized" Samba group (send an email to info (at) pumpingstationone.org with your username and the name of the person who certified you) so that your login works. If you don't have a log-in on https://members.pumpingstationone.org/ you will have issues here - sign up on that site first if you haven't already.

= Maintenance =

== Maintenance Log ==
{| class="wikitable" border="1"
!Date
!Preformed by
!Service Type
!Notes
|-
|4/16/2017
|Ryan Pierce
|Created new AutoDesk Fusion 360 Post Processor. Modified Vectric Post Processors.
|Created new Fusion 360 Post Processor. It includes the changes listed below for the Vectric Post Processors. For Vectric, modified the Post Processors so that if the spindle does not spin up, it gives the user a Retry/Cancel dialog box instead of Abort/Retry/Ignore where Ignore is identical to Retry. Also, these Post Processors broke the Preview mode in the ShopBot software because the preview mode did the real spindle check and it failed because, of course, the spindle wasn't running. The new version will ignore the spindle check in preview mode.
|-
|11/8/2014
|Ryan Pierce
|Updated VCarve Post Processor
|Previously, installed new Post Processor to preset an Abort / Retry / Ignore dialog box when the spindle is started but doesn't spin up. Usual culprit is that a job is started when the the interlock is disabled, which results in the non-spinning bit crashing into the workpiece. Abort stops the job. Today, fixed Retry code. If you power on the VFD and the motor start is enabled, the VFD refuses to start. So I've re-programmed the Retry button to stop the VFD, wait 2 seconds, start the VFD, wait 2 more seconds, and check again to see if it is running. The Ignore button actually acts as Retry because we don't want someone clicking through this dialog box and damaging the machine. NOTE: The Aspire PC in the shop also has this Post Processor, but if you use Aspire, VCarve Pro, etc. on your personal computer, you will need the latest Post Processor to support this safety check.
|-
|11/8/2014
|Ryan Pierce
|Updated ShopBot software
|Did upgrade from 3.8.14 to 3.8.26. Installed latest firmware on ShopBot controller. (This was mandatory.) Two features of interest: Fixed occasional erractic behavior after repeated Stops and Resumes (and Nudges or Command Insertions). Reduced liklihood of Keypad lockup.
|-
|5/31/2015
|Ron Olson
|Created new VCarve Post Processors
|For drag/engraving bits, it's important that the spindle be turned '''off''' so as to not destroy the bit. Instead of manually modifying the sbp every time to remove the check that the spindle is turned on, I created a couple of new post processors (inches and mm, similar to Ryan's), that explicitly ''turn off'' the spindle. The user is given two opportunities to cancel the job if that is not what he/she wants.
|-
|}

== Outstanding Maintenance Issues ==

=== Lack of True E-Stop ===
As shipped, the ShopBot PRS does not support an Emergency Stop. This could be hacked, but it runs the risk of damaging the machine if engaged in a non-emergency situation. Suggested solution: Installing a 10A double pole 24V coil DIN mount relay, and powering the coil via the 24V supply through a normally closed E-Stop button. One pole will disconnect the 63V stepper motor current. One pole will break the control signal that enables the VFD and will cause the VFD to brake to a stop.

=== Automatic Dust Collection ===
The ShopBot has +5V TTL outputs that could be used to trigger automatic dust collection (when the spindle goes live) and/or a warning light (when the gantry is enabled to move.)

=== Limit Switch Issues ===
Every time you start the ShopBot, it resets itself so that the limit switches are disabled! You can turn them on (if memory serves) with the Values -> Input Switch Assignment menu item. Limit switches are really useful - but they need to be enabled. When they are, they will stop manual jogging when the limit is hit (although pressing the key again will let you continue moving the gantry) and they will also stop a running job (but give you the option of ignoring the limits.)

I found a couple more problems when testing all the limits. When I took the gantry to X maximum, the dust collector hose pulled off! I put it back on, but I'm not sure how stable this is. Also, when I originally set the Y maximum and minimum, I wanted as much spindle travel as possible. But it appears that if you're at the Y max and move in the X direction, you can hit the middle support with the dust collector boot. We've got several inches Y travel beyond the nominal 48", so we may want to look into reducing this to clear the supports.

== Resources ==
[[File:ShopBot PSOne Post Processors.zip]] - Post Processors for Vectric Aspire and VCarve Pro 8.0 which includes the change to check that the spindle actually started.

[[File:ShopBot_TC_PS1-NO-SPIN.zip]] - Post Processors for Vectric Aspire and VCarve Pro which include changes to explicitly *disable* spinning

[[File:ShopBot PSOne Fusion 360 Post Processor.zip]] - Post Processor for Autodesk Fusion 360 which includes the change to check that the spindle actually started.

[[Category:Fabrication]]
[[Category:CNC]]
[[Category:Future Things Bus Data Sources]]

Grizzly 6" jointer

2017-12-01T04:34:29Z

Wittnl: authorization

{{Template:EquipmentPage
|owner = PS1
|certification=yes
|hackable = NO
|model = G0654
|serial = NA
|arrived = Sept 2013
|doesitwork = no
|contact = Wood Shop Area Host
|where = Wood Shop
|value = $525.00
|hostarea = Wood Shop
|image = Jointer.jpg
}}

== Status ==
Offline until repaired. If you want to be notified when the jointer is back in service, edit this page and leave your email address or whatever means of contact you prefer, here.

Recently purchased from Matt Triano for a song. Thank you for everything, Matt!

Spring of guard is broken. Still usable, but should be repaired.

'''This tool requires authorization for use.'''

{{WoodshopProctors}}

== Rules ==
# Always check your wood for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet.
# Remove the smallest amount of material possible and feed it at an appropriate speed. More passes are better than fewer. If you don't know how to properly adjust the infeed table, ask for help.
# Always use the vacuum while running the jointer. Otherwise, it will clog with chips.
# If you break something, or damage the tool, contact the area host immediately. Don't let others do more damage to the machine, ruin their work, or hurt themselves by using a broken tool.
# Always vacuum the machine, cutting area, and the table around the machine when you are done.

== Documentation ==
* [http://cdn0.grizzly.com/manuals/g0654_m.pdf Manual]
* [http://cdn0.grizzly.com/partslists/g0654_pl.pdf Parts List]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Matt Triano
|Owner
|
|-
|Marcin Ignasiak
|Eric Beauchamp
|
|-
|Jason Shanfield
|Matt Triano
|
|-
|Sam Drazin
|Matt Triano
|
|-
|Eric Beauchamp
|Matt Triano
|
|-
|Ryan Pierce
|Matt Triano
|
|-
|Pete Noverini
|Matt Triano
|
|-
|Mike Coriale
|Matt Triano
|
|-
|Will Garza
|Matt Triano
|
|-
|Chris Kleehammer
|[[User:jason|Jason Shanfield]]
|
|-
|Trey Elliott
|[[User:jason|Jason Shanfield]]
|
|-
|Nik Brink
|[[User:jason|Jason Shanfield]]
|
|-
|Bradley Topol
|Matt Triano
|
|-
|Mike Jones
|Matt Triano
|
|-
|Ray Doeksen
|[[User:jason|Jason Shanfield]]
|
|-
|Hunter Koerner
|Eric Beauchamp
|
|-
|Casey Olson
|Matt Triano
|
|-
|Eugene Liokumovich
|Matt Triano
|
|-
|Jeff Smykil
|Matt Triano
|
|-
|Scott Merrell
|Eric Beauchamp
|
|-
|Erik Wessing
|Eric Beauchamp
|
|-
|Glenn Trussell
|Eric Beauchamp
|
|-
|David Gutowsky
|Eric Beauchamp
|
|-
|Szymon Sambor
|Eric Beauchamp
|9/3/15
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/15
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/15
|-
|Shine Chen
|Eric Beauchamp
|11/19/15
|-
|Mike Forkan
|Eric Beauchamp
|11/19/15
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/15
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/15
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/15
|-
|Chris Kohl
|Andy Larkin
|1/21/16
|-
|Ian McGrath
|Andy Larkin
|1/21/16
|-
|Amner Castillo
|Eric Beauchamp
|2/26/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Colin Campbell
|Andy L
|5/5/16
|-
|Hans Griese
|Andy L
|5/5/16
|-
|Daniel Sojka
|Andy L
|
|-
|Ken Burkhardt
|Andy Larkin
|5/5/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
|Jim Brink
|Andy Larkin
|07/21/16
|-
|Derwin Umali
|Andy Larkin
|8/7/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|8/4/16
|-
|Joe Dowling
|Ken Burkhardt
|8/15/16
|-
|Simon Pyle
|Andy Larkin
|
|-
|Matt Meshulam
|Jason Shanfield
|8/24/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|Brian Cuocci
|Andy Larkin
|9/15/16
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Revant Ohri
|Andy L
|9/15/16
|-
|Sam Paris
|Ken Burkhardt
|
|-
|Aaron Mintz
|Ken Burkhardt
|10/17/16
|-
|Brian Carstensen
|Ken Burkhardt
|10/17/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Robert Richardson
|Ken Burkhardt
|10/17/16
|-
|Ryan Fiebing
|Ken Burkhardt
|10/24/16
|-
|Jack Berg
|Ken Burkhardt
|11/07/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Matt Schaid
|Andy Larkin
|01/05/17
|-
|Jamie Vollmer
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Chris Ruhland
|Andy Larkin
|01/19/17
|-
|Bruce Mace
|Eric Beauchamp
|02/20/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|Crystal Morales
|Andy Larkin
|3/16/17
|-
|Jason Pittman
|Andy Larkin
|3/16/17
|-
|Ashley Borg
|Andy Larkin
|4/13/17
|-
|Sam Chen
|Andy Larkin
|
|-
|Brett Sanderson
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|Andrew Vaughan
|Andy Larkin
|4/25/17
|-
|David Earl
|Ralph Brendler
|5/4/17
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Luis Colmenares
|Ralph Brendler
|6/1/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|Danielle MacDonald
|Ralph Brendler
|6/29/17
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Justin Pestka
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Mark Haughey
|Sevin Straus
|9/30/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/20/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/2/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Tee
|Paul V
|11/09/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-}

[[Category:Shop Equipment]]
[[Category:Wood Shop]]
[[Category:Loaned Equipment]]

Sears Scroll Saw

2017-12-01T04:32:29Z

Wittnl: authorization

{{Template:EquipmentPage
|owner = PS:One
|model = Sears/Craftsman 137.216160
|serial = RFW11
|arrived = April 2009
|doesitwork = yes
|contact = Dan Meyer
|where = Wood Shop
|certification = yes
|hackable = no
|value = $100
|hostarea = Wood Shop
|image = Sears_scroll_saw_small.jpg
}}

{{WoodshopProctors}}

== Documentation ==
* [http://www.managemylife.com/mmh/lis_pdf/OWNM/L0808290.pdf Owner's manual]

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member Keon Turner
! Trained By Ron Olson
|-
|Adam Flynn
|Danger Committee
|-
|Julie Moffitt
|Danger Committee
|-
|Sacha De'Angeli
|Danger Committee
|-
|Eric Michaud
|Danger Committee
|-
|Dan Davis Bodeiaver?
|Danger Committee
|-
|Tim Saylor
|Danger Committee
|-
|Zane Bowers
|Danger Committee
|-
|Teddie Goldenberg
|Seth D. Slis?
|-
|Nicolle Nevlist
|Seth D. Slis?
|-
|Jeff Kantarek
|Eric Michaud
|-
|Chris Luiz
|Eric Michaud
|-
|Avner Shanan
|Chris Luiz
|-
|David Mole
|Tim Saylor
|-
|Sarah Sutherlin
|Jeff Kantarek
|-
|Jeannette Thraen
|Sarah Sutherlin
|-
|Jasna Delic
|Sarah Sutherlin
|-
|Nathan Witt
|?
|-
|Tom Ketola
|Nathan Witt
|-
|Geoffrey Topham
|Nathan Witt
|-
|John Stoner
|Nathan Witt
|-
|Ryan Lanham
|Nathan Witt
|-
|Brian Cordanvier
|Nathan Witt
|-
|Jim Burke
|Nathan Witt
|-
|Anne Petersen
|Nathan Witt
|-
|Cory Knapp
|Nathan Witt
|-
|Joshua Rothhaas
|Shawn Blaszak
|-
|Jay Hopkins
|Shawn Blaszak
|-
|Jordan Bunker
|Nathan Witt
|-
|Constomtin Gowileson?
|Nathan Witt
|-
|Alek Shnayder
|Nathan Witt
|-
|John Dorfman
|Nathan Witt
|-
|Jakub Klimuszko
|Sacha De'Angeli
|-
|Adrianna McKinley
|?
|-
|Nathan Witt
|Adrianna McKinley
|-
|Bryer Le?
|Eric Michaud
|-
|Matt Bran
|Shawn Blaszak
|-
|Nick Ferrari
|Tim Saylor
|-
|Chris Fanning
|Shawn Blaszak
|-
|Mike Warot
|Adrianna McKinley
|-
|Gabriel Rosenhouse
|Adrianna McKinley
|-
|Malerie Kaplan
|Tim Saylor
|-
|Tucker Tomlinson
|Shawn Blaszak
|-
|Joseph Prosninitz
|Adrianna McKinley
|-
|Steve Farkas
|Adrianna McKinley
|-
|Ryan Pierce
|Adrianna McKinley
|-
|Michael Reddy
|Tim Saylor
|-
|Matt Triano
|Tim Saylor
|-
|Derek Bever
|Tim Saylor
|-
|Dan Willmott
|Tim Saylor
|-
|Tyler DeAngelo
|Tim Saylor
|-
|Michael Skilton
|Tim Saylor
|-
|Kathy Whisler
|Adrianna McKinley
|-
|Janet Dornhoff
|Matt Triano
|-
|Hilary Lee
|Matt Triano
|-
|Will Rante
|Matt Triano
|-
|Henry Behel
|Matt Triano
|-
|Alan Livshin
|Matt Triano
|-
|Michelle Garcia
|Matt Triano
|-
|Daylan Dufelmeier
|Matt Triano
|-
|Michael Maloney
|Matt Triano
|-
|Ian Cochran
|Matt Triano
|-
|Bryan Gleason
|Matt Triano
|-
|Sloan Lavery
|Matt Triano
|-
|Trey Keifer
|Matt Triano
|-
|Juan Robles
|Matt Triano
|-
|Simon Cygielski
|Matt Triano
|-
|Tom Forajter
|Matt Triano
|-
|Robert Grossman
|Matt Triano
|-
|Lucas Morris
|Matt Triano
|-
|Sergio Preston
|Matt Triano
|-
|Casey Olson
|Matt Triano
|-
|David Fell
|Ron Olson
|-
|Dubi Kaufmann
|Ron Olson
|-
|Patrick Grider
|Ron Olson
|-
|John Farmer
|Ron Olson
|-
|Sam Paris
|Ron Olson
|-
|Frances Ritchie
|Ron Olson
|-
|Ben Kern
|Ron Olson
|-
|Eric Yu
|Ron Olson
|-
|Karol Slowikowski
|Ron Olson
|-
|Chris Smith
|Ron Olson
|-
|Benjamin Miller
|Ron Olson
|-
|Laurel Garrett
|Matt Triano
|-
|Rei Kevin
|Matt Triano
|-
|Aji Slater
|Matt Triano
|-
|John Beyer
|Matt Triano
|-
|Brad Topol
|Matt Triano
|-
|-
|Shae Kurko
|Matt Triano
|-
|Hunter Koerner
|Eric Beauchamp
|-
|Kurt Ziegel
|Eric Beauchamp
|-
|Simon Pyle
|Eric Beauchamp
|-
|Connor Jansen
|Eric Beauchamp
|-
|Ananda Stevens
|Eric Beauchamp
|-
|Erik Wessing
|Eric Beauchamp
|-
|Mark Stevens
|Eric Beauchamp
|-
|Sam Paris
|Eric Beauchamp
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|Kyle Bieneman
|Eric Beauchamp
|8/27/2015
|-
|Jim Baker
|Eric Beauchamp
|8/27/2015
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|-
|Niko Hawley
|Eric Beauchamp
|-
|Kevin Mitchell
|Eric Beauchamp
|-
|-Caleb Young
|-Eric Beauchamp
|-
|[[User:themoffatt|Adam Moffatt]]
|Eric Beauchamp
|10/22/2015
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Ashley Borg
|Andy Larkin
|4/3/17
|-
|Sam Chen
|Andy Larkin
|-
|Abel Greenwald
|Andy Larkin
|-
|Luis Colmenares
|Ralph
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-}
[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Wood Shop]]

SawStop table saw

2017-12-01T04:30:56Z

Wittnl: authorization

{{Template:EquipmentPage
|owner = PS:One
|certification=yes
|hackable = NO
|model = 3.0HP 220V
|serial = NA
|arrived = 9/1/2012
|doesitwork = yes
|contact = Matt Triano
|where = Wood Shop
|value = $3,000.00
|image = SawStop.jpg
|hostarea = Wood Shop
}}
[[File:Saw stop badge.jpg|thumb|right|200px]]

= Authorization for this tool by authorized proctors only =
== Authorized Proctors ==
{| class="wikitable" border="1"
|-
|Matt Triano
|-
|Jason Shanfield
|-
|Ron Olson
|-
|Eric Beauchamp
|-
|Andy Larkin
|-
|Ken Burkhardt
|-
|Ralph Brendler
|-
|Paul VanLake
|}

== Status ==

Repaired and in working order as of 11/9/2015

== How to Become an Authorized Proctor ==

Contact area host Eric Beauchamp.

= Rules =
# Do not move the machine ever.
# Never use the table as a work surface.
# Always have the dust collection on. Turn it on before you plug in the saw and off after you unplug the saw.
# Always check your material on the blade before you spin up the blade. If the light turns red, DO NOT CUT.
# Always check your wood for nails or staples. If you're not sure, check the entire piece with a magnet.
# If you break something, or damage the saw, contact the area host immediately. Don't let others do more damage or hurt themselves by using a broken tool.
# Always dust the entire machine when you are done. Also check the motor compartment after every use and vacuum out as needed.

= Additional Information =

== Blade Brake ==
This saw is equipped with a safety feature that will (hopefully) stop the blade when it contacts something conductive-- like your hand. However, that means you normally can't cut conductive things with this saw or you will trigger the safety brake. This is good if it was your hand in the way, but it also destroys the sawblade and requires installation of a replacement part that costs $70+ every time. And the saw will be down until the replacement can be installed.

According to the owner's manual: "Conductive materials such as aluminum and other metals, carbon fiber materials, '''mirrored acrylic''', carbon-filled materials, etc. will typically '''cause the brake to activate'''." [Emphasis added.]

Other things that may trigger the brake include wet wood, and wood with embedded nails or staples. Lexan and green pressure-treated wood reportedly can also be a problem. That is why the rules instruct you to check your material on the side of the blade before spinning it up, and to check your wood for nails or staples!

== Notes ==
* There's an m8 hole drilled and tapped in the mitre gauge. The post from a magnetic base of our dial indicators thread in. The post may require a spacer so the threads don't stick out (use a stack of washers or a larger-than-m8 nut).
* The right hand table adjusting screw was bent while aligning the table. The table was aligned without it. Aligning the arbor tilt axis will be *really tough* without a replacement. (Part #11 in the cabinet and table exploded diagram in the manual p98)
* The rear rip fence rail has places to put 4 countersunk allen bolts. The left hand bolt screwed into the main table was too long and made contact with an internal table part (probably the rear trunion). It probably pushed the table out of alignment and caused binding while re-aligning the table. That bolt was left out. Don't replace it!

== Training Links ==
* [http://www.sawstop.com/images/uploads/manuals/PCS%20Owners%20Manual%20Model%20PCS31230%20V5.0%2009-13.pdf Owner's Manual]

== Maintenance ==
* [http://web.archive.org/web/20130224091815/http://www.woodworkersjournal.com/Main/Articles/Table_Saw_Maintenance_Skill_Builder_Power_Tool_Tun_8197.aspx Table Saw Maintenance]
* [[SawStop Table Saw maintenance|maintenance page]]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Shawn Blaszak
|Danger Committee
|-
|[[User:Meistertek|Dan Meyer]]
|Sean Blaszak
|-
|Jacob Ginsburg
|Shawn Blaszak
|-
|Eric Stein
|Steve Finkelman / Danger Committee
|-
|[[User:Dee|Dee Newcum]]
|Shawn Blaszak
|-
|Ryan Pierce
|Shawn Blaszak
|-
|Tucker Tomlinson
|Shawn Blaszak
|-
|Adrianna McKinley
|Danger Committee
|-
|Anthony Barker
|Adrianna McKinley
|-
|Avner Shanan
|Adrianna McKinley
|-
|Colin Parsons
|Adrianna McKinley
|-
|Dan Denby
|Adrianna McKinley
|-
|Dillon Gray
|Adrianna McKinley
|-
|Douglas Savitsky
|Adrianna McKinley
|-
|Hailey Willis
|Adrianna McKinley
|-
|Jeremy Bloyd-Peshkin
|Adrianna McKinley
|-
|Jeremy Kay
|Adrianna McKinley
|-
|Jessica Cobb
|Adrianna McKinley
|-
|Jordan Bunker
|Adrianna McKinley
|-
|Kori Rays
|Adrianna McKinley
|-
|Patrick Callahan
|Adrianna McKinley
|-
|Ryan Brandys
|Adrianna McKinley
|-
|Shawn Blaszak
|Adrianna McKinley
|-
|Steve Farkas
|Adrianna McKinley
|-
|Steve Finkleman
|Adrianna McKinley
|-
|Mike Warot
|Adrianna McKinley
|-
|Eric Stein/Toba
|Adrianna McKinley
|-
|Ryan Pierce
|Adrianna McKinley
|-
|Geoffrey Topham
|Adrianna McKinley
|-
|Tim Saylor
|Ryan Pierce
|-
|Hailey Willis
|Tim Saylor
|-
|James Longfield
|Tim Saylor
|-
|Liam Tuohy
|Tim Saylor
|-
|Jim Tuohy
|Tim Saylor
|-
|Sean Nixon
|Tim Saylor
|-
|Michael Reddy
|Tim Saylor
|-
|Matt Triano
|Tim Saylor
|-
|Derek Bever
|Tim Saylor
|-
|Dan Willmott
|Tim Saylor
|-
|Tyler DeAngelo
|Tim Saylor
|-
| Michael Skilton
| Adrianna McKinley
|-
| Dean Anderson
| Tim Saylor
|-
|Kathy Whisler
|Tucker Tomlinson
|-
| João Santos
| Geoffrey Topham
|-
|David Fell
|Tucker Tomlinson
|-
|[[User:Bikemandan|Dan Locks]]
|Adrianna McKinley
|-
|Dave Earley
|[[User:Bikemandan|Dan Locks]]
|-
| Boban Nikolic
| Michael Skilton
|-
| Madeleine Klichowski
| Tim Saylor
|-
| Lyn Cole
| Tim Saylor
|-
| Nathan Becka
| Tim Saylor
|-
| Brian Carstensen
| Tim Saylor
|-
| Eric Veggeberg
| Tim Saylor
|-
| George Shaw
| Tim Saylor
|-
|Janet Dornhoff
|Matt Triano
|-
|Hilary Lee
|Matt Triano
|-
|Will Rante
|Matt Triano
|-
|Henry Behel
|Matt Triano
|-
|Alan Livshin
|Matt Triano
|-
|Michelle Garcia
|Matt Triano
|-
|Daylan Dufelmeier
|Matt Triano
|-
|Michael Maloney
|Matt Triano
|-
|Ian Cochran
|Matt Triano
|-
|Abhimanyu Belani
|Will Rante
|-
|Justin Miles
|Adrianna McKinley
|-
|Dmitry Baycharov
|Matt Triano
|-
|Stephen Ulman
|Matt Triano
|-
|Jarred Meyers
|Matt Triano
|-
|Andrew Kos
|Matt Triano
|-
|Bryan Gleason
|Matt Triano
|-
|Jason Sharfield
|Matt Triano
|-
|Dave Schact
|Matt Triano
|-
|Daniel Wells
|Matt Triano
|-
|Sean Corbett
|Matt Triano
|-
|Aaron Feigen
|Matt Triano
|-
|Bo Driscoll
|Matt Triano
|-
|Joel Shepherd
|Matt Triano
|-
|Santina Croniser
|Matt Triano
|-
|Todd Allen
|Matt Triano
|-
|Lawrence MacDevitt
|Matt Triano
|-
|Ryan Kelly
|Matt Triano
|-
|Melody Stanley
|Matt Triano
|-
|Tom Ackenhausen
|Matt Triano
|-
|JJ Sciappa
|Jason Shanfield
|-
|Jason Araujo
|Derek Bever
|-
|John Godwim
|Matt Triano
|-
|Jeff Molek
|Matt Triano
|-
|Nathan Ellis
|Jason Shanfield
|-
|Sloan Lavery
|Matt Triano
|-
|Trey Keifer
|Matt Triano
|-
|Juan Robles
|Matt Triano
|-
|Simon Cygielski
|Matt Triano
|-
|Tom Forajter
|Matt Triano
|-
|Robert Grossman
|Matt Triano
|-
|Lucas Morris
|Matt Triano
|-
|Sergio Preston
|Matt Triano
|-
|Ron Bean
|Matt Triano
|-
|Greg Eagel
|Matt Triano
|-
|Carter Constana
|Matt Triano
|-
|Adam Glick
|Matt Triano
|-
|Zachary Fietsch
|Matt Triano
|-
|Solomon Hursey
|Matt Triano
|-
|Jesse Reynolds
|Matt Triano
|-
|Eduard Shlahtichman
|Matt Triano
|-
|Skittles Rainbow
|Matt Triano
|-
|Tom Jurgensen
|Matt Triano
|-
|Barmey Ung
|Matt Triano
|-
|Casey Olson
|Matt Triano
|-
|Jonathan Bisson
|Matt Triano
|-
|Ed Bennett
|Matt Triano
|-
|Anna Yu
|Matt Triano
|-
|Bandit Gangwere
|Matt Triano
|-
|Joseph Nudell
|Matt Triano
|-
|David Butler
|Matt Triano
|-
|Kathryn Smiley
|Matt Triano
|-
|Aimee Spevak
|Matt Triano
|-
|Cassie Webster
|Matt Triano
|-
|Chris Moylan
|Matt Triano
|-
|Mike O'Connor
|Matt Triano
|-
|Tyler Hsu
|Matt Triano
|-
|Zihe "Johnson" Luo
|Matt Triano
|-
|Giovanni Arroyo
|Matt Triano
|-
|Ian McLeod
|Derek Bever
|-
|Dan Thomson
|Jason Shanfield
|-
|Brandon Price
|Matt Triano
|-
|Arturo Duarte
|Matt Triano
|-
|Eric Braun
|Matt Triano
|-
|Jeremy Fay
|Matt Triano
|-
|Leeswann Bolden
|Matt Triano
|-
|James Porter
|Matt Triano
|-
|Jeff McBride
|Matt Triano
|-
|Connor Miller
|Matt Triano
|-
|Ashley Duca
|Matt Triano
|-
|Karen Niemczyk
|Matt Triano
|-
|Bassam Alshammari
|Matt Triano
|-
|John Fiene
|Matt Triano
|-
|Thomas Wright
|Matt Triano
|-
|Tom Judge
|Jason Shanfield
|-
|Joseph Peltier
|Matt Triano
|-
|Justin Conroy
|Matt Triano
|-
|David Koppel
|Matt Triano
|-
|Sevin Straus
|Matt Triano
|-
|Roger Moore
|Matt Triano
|-
|Valerie Moore
|Matt Triano
|-
|Andy Schwartz
|Matt Triano
|-
|Assaf Evron
|Matt Triano
|-
|David Pelot
|Matt Triano
|-
|Rich Smith
|Matt Triano
|-
|Khoi Nguyen
|Matt Triano
|-
|Brian Keehner
|Matt Triano
|-
|Jesse Gare
|Matt Triano
|-
|Tyler Natoli
|Matt Triano
|-
|David Siegfried
|Matt Triano
|-
|Annie Zebula
|Matt Triano
|-
|<strike>Eliya Gwetta</strike>
|Matt Triano
|-
|Patrick Schliss
|Matt Triano
|-
|Arjun Wadnerkar
|Matt Triano
|-
|Alec Weege
|Matt Triano
|-
|Sonia Yaco
|Matt Triano
|-
|Tom Bossier
|Jason Shanfield
|-
|Ray Doeksen
|Jason Shanfield
|-
|Touly Phiachantharath
|Matt Triano
|-
|Matt Vibberts
|Matt Triano
|-
|Thomas Garza
|Matt Triano
|-
|Will Garza
|Matt Triano
|-
|Brennan Koziarz
|Matt Triano
|-
|Eric Beauchamp
|Matt Triano
|-
|Clarence Risher
|Matt Triano
|-
|Erica Tesla
|Matt Triano
|-
|Jabu Dawdu
|Matt Triano
|-
|Karen Murphey
|Matt Triano
|-
|Matt Meshulam
|Matt Triano
|-
|Josh Myers
|Matt Triano
|-
|Weston Tanner
|Matt Triano
|-
|Hugh Sato
|Matt Triano
|-
|Nora Sluzas
|Matt Triano
|-
|Elizabeth Koprucki
|Matt Triano
|-
|Oscar Villareal
|Matt Triano
|-
|Rob Paral
|Matt Triano
|-
|Alex Schaffer
|Matt Triano
|-
|Szymon Sambor
|Matt Triano
|-
|Michael Solhelm
|Matt Triano
|-
| Rob Paral
| Michael Skilton
|-
| Sonia Yaco
| Matt Triano
|-
| Alyssa Moxley
| Ron Olson
|-
| Kyle Bieneman
| Ron Olson
|-
|Steve Ioannou
|Matt Triano
|-
|[[User:Mwilkens|Matt Wilkens]]
|Matt Triano
|-
|Eric Slehofer
|Matt Triano
|-
|Jon Levine
|Matt Triano
|-
|Melody Snyder
|Matt Triano
|-
|Curtis Cooke
|Matt Triano
|-
|Harry Morgan
|Matt Triano
|-
|Lucas Goossen
|Matt Triano
|-
|Sam Drazin
|Matt Triano
|-
|Mike Kislovsky
|Matt Triano
|-
|Keven Kalay
|Matt Triano
|-
|Jacob Rush
|Ron Olson
|-
|Sam Reicks
|Ron Olson
|-
|Kevin Pulver
|Ron Olson
|-
|Keith Hultman
|Ron Olson
|-
|Cary Lahucik
|Ron Olson
|-
|John Keippel
|Ron Olson
|-
|Mario Rodriguez
|Ron Olson
|-
|Szilvia Precsinszki
|Ron Olson
|-
|Davis Mazariegos
|Ron Olson
|-
|Pete Noverini
|Matt Triano
|-
|Mike Coriale
|Matt Triano
|-
|Dan Baltudis
|Ron Olson
|-
|Viktor Bazarov
|Ron Olson
|-
|Roman Solomatov
|Ron Olson
|-
|Patrick Grider
|Ron Olson
|-
|Dubi Kaufmann
|Ron Olson
|-
|Erin Kunkel
|Matt Triano
|-
|Tyler Matthew
|Matt Triano
|-
|Shae Kurko
|Matt Triano
|-
|Ben Bogler
|Matt Triano
|-
|Rod McLah
|Ron Olson
|-
|Andrew Dreasler
|Ron Olson
|-
|Sam Paris
|Matt Triano
|-
|Chris Kleehammer
|[[User:jason|Jason Shanfield]]
|-
|Trey Elliott
|[[User:jason|Jason Shanfield]]
|-
|Nik Brink
|[[User:jason|Jason Shanfield]]
|-
|Frances Ritchie
|Ron Olson
|-
|Ben Kern
|Ron Olson
|-
|Knute Martell
|Ron Olson
|-
|Eric Yu
|Ron Olson
|-
|Knute Martell
|Ron Olson
|-
|Bob McGrath
|Ron Olson
|-
|Karol Slowikowski
|Ron Olson
|-
|Michelle Deleon
|Ron Olson
|-
|Chris Smith
|Ron Olson
|-
|Benjamin Miller
|Ron Olson
|-
|Jennie P
|Ron Olson
|-
|Joe Wallace
|Ron Olson
|-
|Eugene Liokumovich
|Ron Olson
|-
|Laurel Garrett
|Matt Triano
|-
|Rei Kevin
|Matt Triano
|-
|Aji Slater
|Matt Triano
|-
|John Beyer
|Matt Triano
|-
|Jay Kasturi
|Ron Olson
|-
|Ryan Neuman
|Ron Olson
|-
|[[User:papaben44|Benjamin Dambman]]
|Matt Triano
|4/14/2015
|-
|Tomas Ward
|Ron Olson
|4/26/2015
|-
|Les Schier
|Jason Shanfield
|5/2/15
|-
|Mike Jones
|Matt Triano
|5/12/15
|-
|Hunter Koerner
|Eric Beauchamp
|6/4/15
|-
|Kurt Ziegel
|Eric Beauchamp
|6/4/15
|-
|Simon Pyle
|Eric Beauchamp
|6/4/15
|-
|Andy Richardson
|Matt Triano
|4/14/15
|-
|Connor Jansen
|Eric Beauchamp
|6/4/15
|-
|Raj Perera
|Matt Triano
|-
|Matt Crump
|Jason Shanfield
|7/1/15
|-
|Erik Wessing
|Eric Beauchamp
|-
|Ananda Stevens
|Eric Beauchamp
|7/18/15
|-
|Mark Stevens
|Eric Beauchamp
|7/18/15
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|Jim Baker
|Eric Beauchamp
|8/27/2015
|-
|Ralph Brendler
|Eric Beauchamp
|8/27/2015
|-
|Bruce McConachie
|Eric Beauchamp
|8/27/2015
|-
|Shane Kanter
|Ron Olson
|9/10/2015
|-
|Burton Kent
|Ron Olson
|9/10/2015
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|Deanna Williams
|Eric Beauchamp
|-
|Jeff Smykil
|Matt Triano
|9/26/2015
|-
|Glenn Powers
|Matt Triano
|3/2015
|-
|Niko Hawley
|Eric Beauchamp
|-
|Kevin Mitchell
|Eric Beauchamp
|-
|John McDonald
|Eric Beauchamp
|10/05/2015
|-
|[[User:themoffatt|Adam Moffatt]]
|Eric Beauchamp
|10/22/2015
|-
|Jean Michel Crettaz
|Eric Beauchamp
|10/22/2015
|-
|Mike Mandrea
|Eric Beauchamp
|11/05/2015
|-
|-Caleb Young
|-Eric Beauchamp
|-
|Peter Letscher
|Eric Beauchamp
|11/05/15
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Shine Chen
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/04/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Chris Kohl
|Eric Beauchamp
|1/8/2016
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Craig Koszewski
|Eric Beauchamp
|1/28/16
|-
|Amner Castillo
|Eric Beauchamp
|2/26/16
|-
|Christopher Carson
|Eric Beauchamp
|2/26/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Jared K.
|Eric Beauchamp
|3/10/16
|-
|Mark Zumwalt
|Andy Larkin
|3/17/16
|-
|Adriana Garcia
|Eric Beauchamp
|3/24/16
|-
|Julie Zwolinski
|Eric Beauchamp
|3/24/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Greg "Nerobro" Teiber
|Dan Locks
|4/29/16
|-
|Ken Burkhardt
|Andy Larkin
|5/5/16
|-
|Colin Campbell
|Andy Larkin
|5/5/16
|-
|Hans Griese
|Andy Larkin
|5/5/16
|-
|Spencer Simms
|Eric Beauchamp
|05/19/2016
|-
|Adam Stein
|Andy Larkin
|4/14/2016
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Ian Monroe
|Eric Beauchamp
|5/19/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
|Jim Brink
|Andy Larkin
|07/21/16
|-
|Donald Wells
|/Andy Larkin
|8/4/16
|-
|Derwin Umali
|Andy Larkin
|08/04/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Joe Dowling
|Ken Burkhardt
|08/15/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|Brian Cuocci
|Andy L
|9/15/16
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Revant Ohri
|Andy L
|9/15/16
|-
|Aaron Mintz
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|-
|Robert Richardson
|Ken Burkhardt
|10/17/16
|-
|Ryan Fiebing
|Ken Burkhardt
|10/24/16
|-
|Jack Berg
|Ken Burkhardt
|11/07/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Matt Schaid
|Andy Larkin
|01/05/17
|-
|Jamie Vollmer
|Andy Larkin
|01/05/17
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Bruce Mace
|Eric Beauchamp
|02/20/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|Crystal Morales
|Andy Larkin
|2017-03-16
|-
|Jason Pittman
|Andy Larkin
|2017-03-16
|-
|Sam Chen
|Andy Larkin
|-
|Abel Greenwald
|Andy Larkin
|
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Molly Adamski
|Ralph Brendler
|4/27/2017
|-
|Shabab Mustafa
|Ralph Brendler
|4/27/17
|-
|Adomas Tautkus
|Ralph Brendler
|4/27/17
|-
|Brett Sanderson
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|David Earl
|Ralph Brendler
|5/4/2017
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Luis Colmenares
|Ralph Brendler
|6/1/17
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Andrew Wingate
|Jason Shanfield
|7/22/17
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Dan Kim
|Ralph Brendler
|9/21/17
|-
|Mark Haughey
|Sevin Straus
|9/30/17
|-
|Jacqueline Villa
|Maria Miller
|10/3/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/9/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-}

[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Wood Shop]]
[[Category:Certification Clarification Needed]]

Rockwell Delta 20" Bandsaw

2017-12-01T04:29:33Z

Wittnl: authorization

{{Template:EquipmentPage
|owner = Pumping Station:One
|hostarea = Wood Shop
|certification = yes
|hackable = no
|model = 28-350
|serial = 1457257
|arrived = 8/26/15
|where = Wood Shop
|doesitwork = yes
|contact = matt . triano @ gmail . com
|value = $1,000
|image = RockwellDelta20Bandsaw.jpg
}}

==Notes==
manual: [[File:Rockwell-28-350.pdf]]
related manual with more details: [[File:Rockwell20bandsaw.pdf]]
===Authorizations for the 14" Rockwell do not carry over to this tool===
This tool requires authorization for use. Please see an authorized proctor below.

=== Consumable Parts ===
This saw takes 141" blades.

==Tips on Use==

This section is based on a [https://groups.google.com/forum/#!msg/pumping-station-one/rCix6WMMS4Q/S6Ds9sO7DAAJ discussion that took place on the mailing list].

Band-saws have two main uses in the wood shop:

# The primary use is to make curved cuts in a piece of flat wood. In this case the piece is held by hand and guided so the blade follows the curve. A fence is counterproductive for this use.
# The second is resawing lumber that is too thick for the table saw. This is typically, but not exclusively, done with valuable pieces of wood for the purpose of creating a veneer. A fence may be appropriate for this use.

With a bandsaw, you basically never want to have the fence locked parallel to the blade. Every blade will have some degree of drift, and it is necessary to accommodate this drift to achieve a straight cut. There are two common solutions: single-point fences, and adjustable angle fences. PS:1 has both a nice magnetic adjustable fence and a single-point fence that attaches to it.

With a single point fence, you adjust for the drift angle by eye as you cut. This quick and easy method is most appropriate for resawing of narrower boards with a width of 6" or less.

For wider boards, use the adjustable fence with a tall secondary fence attached, carefully adjusted to the drift angle of the blade. For really wide boards, you can also use a presser-board to ensure contact with the fence.

Some additional advice on resawing:

* Buy a nice blade and learn how to install and adjust it. The PS:1 blades are often fairly dull and don't track well.
* Make sure your stock is prepared well, with at least one flat face and one square and flat edge.
* Try to keep only 3-10 teeth in the wood. A 1.5 tpi blade is appropriate for most resawing.
* Use a skip-tooth blade, at least 1" wide (but see note below).

Although wide blades are best for resawing, using 1" blades on the Rockwell is a challenge. The carter blade guides are difficult to adjust, and 1" is the borderline of their capacity. Adjust them so that the back of the blade runs against the support bearing, rather than digging into the frame of the blade guide. This adjustment is particularly difficult on the lower guide. If you do allow the blade to dig into the blade guide, it may be difficult to detect the mistake. The saw will run fine, even though the frame of the lower guide is pushing the blade forward. There won't necessarily be any telltale noises or tracking problems. The only indications of a problem may be that the back of the blade starts to get hot from friction and will discolor as it picks up resins from the wood.

For even wider blades, it is necessary to remove the lower guide completely. Although not an ideal set-up, if the top guide is adjusted properly and the feed rate is reasonable, it cuts well.

{{WoodshopProctors}}

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Keon Turner
|Ron Olson
|-
|Hunter Koerner
|Eric Beauchamp
|-
|Deanna Williams
|Eric Beauchamp
|-
|Burton Kent
|Eric Beauchamp
|-
|Casey Olson
|Jason Shanfield
|-
|Tom Judge
|Matt Triano
|-
|Jeff Smykil
|(Pending confirmation)
|-
|Anna Yu
|Matt Triano
|-
|Jon Levine
|Jason Shanfield
|-
|Kyle Bieneman
|Eric Beauchamp
|-
|Niko Hawley
|Eric Beauchamp
|-
|Kevin Mitchell
|Eric Beauchamp
|-
|Adam Moffatt
|Jason Shanfield
|-
|Peter Letscher
|Eric Beauchamp
|11/05/15
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Shine Chen
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/04/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|Thomas Ward
|Andy L.
|11/18/2015

|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Chris Kohl
|Eric Beauchamp
|1/8/2016
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Shelly Loke-Gayares
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Sam Paris
|Eric Beauchamp
|1/28/16
|-
|Craig Koszewski
|Eric Beauchamp
|1/28/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Brian Cuocci
|Andy L
|3/17/16
|-
|Julie Zwolinski
|Eric Beauchamp
|3/24/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Colin Campbell
|Andy L
|5/5/16
|-
|Ken Burkhardt
|Andy Larkin
|5/5/16
|-
|Hans Griese
|Andy Larkin
|5/5/16
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Ian Monroe
|Eric Beauchamp
|5/19/16
|-
|An Phan
|Andy Larkin
|7/7/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|Derwin Umali
|Andy Larkin
|8/7/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Joe Dowling
|Ken Burkhardt
|8/15/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|[[user:guijemont|Guillaume Emont]]
|Ken Burkhardt
|9/19/16
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Revant Ohri
|Andy L
|9/15/16
|-
|Aaron Mintz
|Ken Burkhardt
|10/17/16
|-
|Brian Carstensen
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|Robert Richardson
|Ken Burkhardt
|10/17/16
|-
|Ryan Fiebing
|Ken Burkhardt
|10/24/16
|-
|Jack Berg
|Ken Burkhardt
|11/07/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Bruce Mace
|Eric Beauchamp
|02/20/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|Crystal Morales
|Andy Larkin
|2017-03-16
|-
|Jason Pittman
|Andy Larkin
|2017-03-16
|-
|Sam Chen
|Andy Larkin
|-
|Abel Greenwald
|Andy Larkin
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Molly Adamski
|Ralph Brendler
|4/27/17
|-
|Shabab Mustafa
|Ralph Brendler
|4/27/17
|-
|Adomas Tautkus
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|David Earl
|Ralph Brendler
|5/4/17
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Luis Colmenares
|Ralph Brendler
|6/1/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Zack Sasnow
|Paul Van Lake
|8/3/2017
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Joanna C.
|Sam O.
|9/27/17
|-
|Mark Haughey
|Sevin Straus
|9/30/17
|-
|Jacqueline Villa
|Maria Miller
|10/3/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-}

[[Category:Wood Shop]]
[[Category:Shop Equipment]]

Ridgid Oscillating Spindle Sander

2017-12-01T04:28:34Z

Wittnl: authorization

{{Template:EquipmentPage
|owner = PS:One
|certification=yes
|hackable = NO
|model = G0654
|serial = NA
|arrived = December 2014
|doesitwork = yes
|contact = Matt Triano
|where = Wood Shop
|hostarea = Wood Shop
|value = $200.00
}}

'''This tool requires authorization for use.'''

{{WoodshopProctors}}

== Rules ==
# Always check your wood for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet.
# Always use dust collection.
# Always use the appropriate washer with the oscillating drums, and put the washers away when you're done.
# Adjust the belt sander so that the belt tracks without running against the metal supports.
# Always replace washers and throat plates in their respective slots on the front of the machine when you switch accessories.

== Documentation ==
* [https://www.ridgid.com/us/en/oscillating-edge-belt-spindle-sander Links to manual and parts list]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Matt Triano
|Matt Triano
|-
|Erin Kunkel
|Matt Triano
|-
|Tyler Matthew
|Matt Triano
|-
|Shae Kurko
|Matt Triano
|-
|Ben Bogler
|Matt Triano
|-
|Sam Paris
|Ron Olson
|-
|Knute Martell
|Ron Olson
|-
|Chris Kleehammer
|[[User:jason|Jason Shanfield]]
|-
|Trey Elliott
|[[User:jason|Jason Shanfield]]
|-
|Nik Brink
|[[User:jason|Jason Shanfield]]
|-
|Frances Ritchie
|Ron Olson
|-
|Ben Kern
|Ron Olson
|-
|Eric Yu
|Ron Olson
|-
|Karol Slowikowski
|Ron Olson
|-
|Chris Smith
|Ron Olson
|-
|Ryan Pierce
|Matt Triano
|-
|Benjamin Miller
|Ron Olson
|-
|Jennie P
|Ron Olson
|-
|Eugene Liokumovich
|Ron Olson
|-
|Tomas Ward
|Ron Olson
|4/26/2015
|-
|Les Schier
|Jason Shanfield
|5/2/15
|-
|Hunter Koerner
|Eric Beauchamp
|6/4/15
|-
|Erik Wessing
|Eric Beauchamp
|-
|Kurt Ziegel
|Eric Beauchamp
|6/4/15
|-
|Simon Pyle
|Eric Beauchamp
|6/4/15
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|Ralph Brendler
|Eric Beauchamp
|8/27/2015
|-
|Kyle Bieneman
|Eric Beauchamp
|8/27/2015
|-
|Jim Baker
|Eric Beauchamp
|8/27/2015
|-
|Shane Kanter
|Ron Olson
|9/12/2015
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|Deanna Williams
|Eric Beauchamp
|-
|Niko Hawley
|Eric Beauchamp
|-
|Kevin Mitchell
|Eric Beauchamp
|-
|[[User:themoffatt|Adam Moffatt]]
|Eric Beauchamp
|10/22/2015
|-
|Mike Mandrea
|Eric Beauchamp
|11/5/2015
|-
|-Caleb Young
|-Eric Beauchamp
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/03/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Shelly Loke-Gayares
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Joe Dowling
|Ken Burkhardt
|8/15/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|Brian Cuocci
|Andy L
|9/15/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|Bruce Mace
|Eric Beauchamp
|02/20/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/2017
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-}

[[Category:Shop Equipment]]
[[Category:Wood Shop]]

Laguna 16" Planer

2017-12-01T04:27:05Z

Wittnl: authorization

{{Template:EquipmentPage
|owner = PS:One
|certification = yes
|hackable = no
|model = MPLAN1510-0120
|serial = 144367
|arrived =
|doesitwork = yes
|contact =
|where = Wood Shop
|value = $3000
|image = LagunaPlaner.jpg
|hostarea = Wood Shop
}}
== reference material ==
[[file:Laguna16PlanerManual.pdf]]
== Guidelines for proper use ==
# '''Always''' check your wood for nails or staples. Something as small as the staple at the end of a 1x1 can ruin the blades. If you're not sure, check the entire piece with the metal detector sitting on the table saw.
# '''Always''' measure the thickness of your work and set the initial and working blade height to remove only small amounts of material per pass. You will damage the blades if you manage to dig the machine out on your work.
# If the machine is making a strange noise when you use it, there is a problem, and you should '''ask for help.'''
# If the blades are dull or damaged, '''contact the area host immediately.'''
# If you break something, or damage the tool, '''contact the area host immediately.''' Don't let others do more damage or hurt themselves by using a broken tool.
# '''Always''' make sure that the dust collection bag isn't too full and is passing air freely.
# '''Always''' vacuum the machine, cutting area, and the table around the machine when you are done.

'''This tool requires authorization for use.'''

== Checklist ==
PS1 is experimenting with the use of [[checklists]] to encourage the safe use and proper care of tools in the workspace. The latest version of the checklist for this tool is stored as a [https://docs.google.com/document/d/1C0pna59ZDq92vC2uEZM5ANUGh6qx-svit9atMhJNLm8/edit?usp=sharing Google Doc] that can be edited by anyone. If you make changes, update the effective date at the bottom of the document. Print a new copy, and replace the old one.

{{WoodshopProctors}}

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Matt Triano
|Danger committee
|-
|Eric Beauchamp
|Danger committee
|-
|Jason Shanfield
|Matt Triano
|-
|Tom Judge
|Matt Triano
|-
|Hunter Koerner
|Eric Beauchamp
|-
|Deanna Williams
|Eric Beauchamp
|-
|Casey Olson
|Eric Beauchamp
|-
|Burton Kent
|Eric Beauchamp
|-
|Jeff Smykil
|Matt Triano
|-
|Anna Yu
|Jason Shanfield
|-
|Todd Allen
|Ron Olson
|-
|Jon Levine
|Jason Shanfield
|-
|Kyle Bieneman
|Eric Beauchamp
|-
|Niko Hawley
|Eric Beauchamp
|-
|-
|Adam Moffatt
|Eric Beauchamp
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|Keon Turner
|Ron Olson
|-
|Mike Mandrea
|Eric Beauchamp
|-
|-Caleb Young
|-Eric Beauchamp
|-
|Erik Wessing
|Eric Beauchamp
|-
|Doorman Dave
|Eric Beauchamp
|-
|Peter Letscher
|Eric Beauchamp
|11/05/15
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Shine Chen
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/03/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Chris Kohl
|Eric Beauchamp
|1/8/2016
|-
|Szymon Sambor
|Eric Beauchamp
|1/8/2016
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Shelly Loke-Gayares
|Eric Beauchamp
|1/14/16
|-
|Saul Weiner
|Eric Beauchamp
|1/14/16
|-
|Brandon Love
|Eric Beauchamp
|1/28/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Keith Couture
|Eric Beauchamp
|3/10/16
|-
|Julie Zwolinski
|Eric Beauchamp
|3/24/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Greg "Nerobro" Teiber
|Dan Locks
|4/29/16
|-
|Ken Burkhardt
|Andy Larkin
|5/5/16
|-
|Hans Griese
|Andy Larkin
|5/5/16
|-
|Spencer Simms
|Eric Beauchamp
|05/19/2016
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Ian Monroe
|Eric Beauchamp
|5/19/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|An Phan
|Andy Larkin
|07/07/16
|-
|Jim Brink
|Andy Larkin
|07/21/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|Derwin Umali
|Andy Larkin
|8/7/16
|-
|[[User:mct|McTavish McArdle]]
|Andy Larkin
|2016-08-04
|-
|Joe Dowling
|Ken Burkhardt
|8/15/16
|-
|Leo Rodman
|Jason S
|9/12/16
|-
|Brian Cuocci
|Andy L
|9/15/16
|-
|Revant Ohri
|Andy L
|9/15/16
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Aaron Mintz
|Ken Burkhardt
|10/17/16
|-
|Brian Carstensen
|Ken Burkhardt
|10/17/16
|-
|Jon Komperda
|Ken Burkhardt
|10/17/16
|-
|Regan Via
|Ken Burkhardt
|10/17/16
|-
|Robert Richardson
|Ken Burkhardt
|10/17/16
|-
|Jack Berg
|Ken Burkhardt
|11/07/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Ashish Jasani
|Andy Larkin
|11/28/16
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Matthew Quigley
|Andy Larkin
|03/02/17
|-
|W. Anthony Claypool
|Andy Larkin
|03/16/17
|-
|-
|Crystal Morales
|Andy Larkin
|2017-03-16
|-
|Jason Pittman
|Andy Larkin
|2017-03-16
|-
|Ashley Borg
|Andy Larkin
|4/13/17
|-
|Sam Chen
|Andy Larkin
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Molly Adamski
|Ralph Brendler
|4/27/17
|-
|Shabab Mustafa
|Ralph Brendler
|4/27/17
|-
|Adomas Tautkus
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|David Earl
|Ralph Brendler
|5/4/17
|-
|Luis Colmenares
|Ralph Brendler
|6/1/17
|-
|Kari Danek
|Ralph Brendler
|6/15/17
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|Mark Haughey
|Sevin Straus
|9/30/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
| Tommy TBones Cramer
|Ralph Brendlet
|08/30/17
|-
|Mike Thariath
|Ralph Brendlet
|10/19/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/02/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-}

[[Category:Wood Shop]]

Router Table (was Excalibur)

2017-12-01T04:26:15Z

Wittnl: authorization

== Router ==

{{Template:EquipmentPage
| image = Excalibur.jpg
|owner = PS:One
|serial =
|certification = yes
|hackable = no
|model =
|arrived =
|doesitwork = yes
|contact =
|where = Wood Shop
|hostarea = Wood Shop
|value =
}}

'''This tool requires authorization for use.'''

Excalibur Router Table <br>
http://www.general.ca/products/2_excalibur/40-200.html

manual: [[File:Excalibur_router_manual.pdf]]

Porter-Cable 7518 router

{{WoodshopProctors}}

== List of Currently Certified Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date Certified
|-
|Keon Turner
|Ron Olson
|10/19/15
|-
|Marcin Ignasiak
|Eric Beauchamp
|-
|Tim Saylor
|Danger Committee
|-
|Dillon Gray
|Danger Committee
|-
|Shawn Blaszak
|
|-
|Adrianna McKinley
|Tim Saylor
|-
|Kathy Whisler
|Tim Saylor
|-
|James Longfield
|Tim Saylor
|-
|Eric Veggeberg
|Tim Saylor
|-
| Madeleine Klichowski
| Tim Saylor
|-
| Lyn Cole
| Tim Saylor
|-
| Nathan Becka
| Tim Saylor
|-
| Brian Carstensen
| Tim Saylor
|-
| Matt Triano
| Tim Saylor
|-
|Bryan Gleason
|Matt Triano
|-
|Daniel Wells
|Matt Triano
|-
|Sean Corbett
|Matt Triano
|-
|Michael Skilton
|Matt Triano
|-
|Aaron Feigen
|Matt Triano
|-
|Ryan Pierce
|Dan Locks
|-
|John Godwim
|Matt Triano
|-
|Nate Hutchins
|Matt Triano
|-
|Jeff Molek
|Matt Triano
|-
|Sloan Lavery
|Matt Triano
|-
|Trey Keifer
|Matt Triano
|-
|Juan Robles
|Matt Triano
|-
|Simon Cygielski
|Matt Triano
|-
|Tom Forajter
|Matt Triano
|-
|Robert Grossman
|Matt Triano
|-
|Lucas Morris
|Matt Triano
|-
|Sergio Preston
|Matt Triano
|-
|Ron Bean
|Matt Triano
|-
|Greg Eagel
|Matt Triano
|-
|Carter Constana
|Matt Triano
|-
|Adam Glick
|Matt Triano
|-
|Zachary Fietsch
|Matt Triano
|-
|Solomon Hursey
|Matt Triano
|-
|Jesse Reynolds
|Matt Triano
|-
|Eduard Shlahtichman
|Matt Triano
|-
|Skittles Rainbow
|Matt Triano
|-
|Tom Jurgensen
|Matt Triano
|-
|Barmey Ung
|Matt Triano
|-
|Casey Olson
|Matt Triano
|-
|Jonathan Bisson
|Matt Triano
|-
|Bandit Gangwere
|Matt Triano
|-
|Joseph Nudell
|Matt Triano
|-
|David Butler
|Matt Triano
|-
|Kathryn Smiley
|Matt Triano
|-
|Aimee Spevak
|Matt Triano
|-
|Cassie Webster
|Matt Triano
|-
|Chris Moylan
|Matt Triano
|-
|Mike O'Connor
|Matt Triano
|-
|Tyler Hsu
|Matt Triano
|-
|Dee Newcum
|Matt Triano
|-
|Zihe "Johnson" Luo
|Matt Triano
|-
|Giovanni Arroyo
|Matt Triano
|-
|Nathan Ellis
|Matt Triano
|-
|Ian McLeod
|Nathan Ellis
|-
|Brandon Price
|Matt Triano
|-
|Arturo Duarte
|Matt Triano
|-
|Eric Braun
|Matt Triano
|-
|Jeremy Fay
|Matt Triano
|-
|Leeswann Bolden
|Matt Triano
|-
|James Porter
|Matt Triano
|-
|Jeff McBride
|Matt Triano
|-
|Connor Miller
|Matt Triano
|-
|Ashley Duca
|Matt Triano
|-
|Karen Niemczyk
|Matt Triano
|-
|Bassam Alshammari
|Matt Triano
|-
|John Fiene
|Matt Triano
|-
|Thomas Wright
|Matt Triano
|-
|Joseph Peltier
|Matt Triano
|-
|Justin Conroy
|Matt Triano
|-
|David Koppel
|Matt Triano
|-
|Sevin Straus
|Matt Triano
|-
|Roger Moore
|Matt Triano
|-
|Valerie Moore
|Matt Triano
|-
|Andy Schwartz
|Matt Triano
|-
|Assaf Evron
|Matt Triano
|-
|David Pelot
|Matt Triano
|-
|Rich Smith
|Matt Triano
|-
|Khoi Nguyen
|Matt Triano
|-
|Brian Keehner
|Matt Triano
|-
|Jesse Gare
|Matt Triano
|-
|Tyler Natoli
|Matt Triano
|-
|David Siegfried
|Matt Triano
|-
|Annie Zebula
|Matt Triano
|-
|Eliya Gwetta
|Matt Triano
|-
|Patrick Schliss
|Matt Triano
|-
|Arjun Wadnerkar
|Matt Triano
|-
|Touly Phiachantharath
|Matt Triano
|-
|Matt Vibberts
|Matt Triano
|-
|Thomas Garza
|Matt Triano
|-
|Will Garza
|Matt Triano
|-
|Brennan Koziarz
|Matt Triano
|-
|Alec Weege
|Matt Triano
|-
|Eric Beauchamp
|Matt Triano
|-
|Clarence Risher
|Matt Triano
|-
|Erica Tesla
|Matt Triano
|-
|Jabu Dawdu
|Matt Triano
|-
|Karen Murphey
|Matt Triano
|-
|Matt Meshulam
|Matt Triano
|-
|Josh Myers
|Matt Triano
|-
|Weston Tanner
|Matt Triano
|-
|Hugh Sato
|Matt Triano
|-
|Nora Sluzas
|Matt Triano
|-
|Elizabeth Koprucki
|Matt Triano
|-
|Oscar Villareal
|Matt Triano
|-
|Rob Paral
|Matt Triano
|-
|Alex Schaffer
|Matt Triano
|-
|Szymon Sambor
|Matt Triano
|-
|Michael Solhelm
|Matt Triano
|-
|[[User:lucas|Lucas Goossen]]
|Matt Triano
|-
|[[User:Mwilkens|Matt Wilkens]]
|Matt Triano
|-
|Eric Slehofer
|Matt Triano
|-
|Jon Levine
|Matt Triano
|-
|Melody Snyder
|Matt Triano
|-
|Curtis Cooke
|Matt Triano
|-
|Harry Morgan
|Matt Triano
|-
|Sam Drazin
|Matt Triano
|-
|Mike Kislovsky
|Matt Triano
|-
|Keven Kalay
|Matt Triano
|-
|Sam Reicks
|Ron Olson
|-
|Kevin Pulver
|Ron Olson
|-
|Cary Lahucik
|Ron Olson
|-
|Keith Hultman
|Ron Olson
|-
|Mario Rodriguez
|Ron Olson
|-
|John Keippel
|Ron Olson
|-
|Szilvia Precsinszki
|Ron Olson
|-
|Davis Mazariegos
|Ron Olson
|-
|Pete Noverini
|Matt Triano
|-
|Mike Coriale
|Matt Triano
|-
|Dan Baltudis
|Ron Olson
|-
|David Fell
|Ron Olson
|-
|Dubi Kaufmann
|Ron Olson
|-
|Patrick Grider
|Ron Olson
|-
|Tyler Matthew
|Matt Triano
|-
|Shae Kurko
|Matt Triano
|-
|John Farmer
|Ron Olson
|-
|Sam Paris
|Ron Olson
|-
|Frances Ritchie
|Ron Olson
|-
|Ben Kern
|Ron Olson
|-
|Eric Yu
|Ron Olson
|-
|Knute Martell
|Ron Olson
|-
|Karol Slowikowski
|Ron Olson
|-
|Chris Smith
|Ron Olson
|-
|Benjamin Miller
|Ron Olson
|-
|Jennie P
|Ron Olson
|-
|Eugene Liokumovich
|Ron Olson
|-
|Laurel Garrett
|Matt Triano
|-
|Rei Kevin
|Matt Triano
|-
|Aji Slater
|Matt Triano
|-
|John Beyer
|Matt Triano
|-
|Brad Topol
|Matt Triano
|-
|[[User:papaben44|Benjamin Dambman]]
|Matt Triano
|4/14/2015
|-
|Tomas Ward
|Ron Olson
|4/26/2015
|-
|Les Schier
|Jason Shanfield
|5/2/15
|-
|Andy Richardson
|Matt Triano
|4/14/15
|-
|Erik Wessing
|Eric Beauchamp
|-
|Ray Doeksen
|Eric Beauchamp
|-
|Ryan Neuman
|Ron Olson
|-
|Anthony Phelps
|Eric Beauchamp
|8/27/2015
|-
|Ralph Brendler
|Eric Beauchamp
|8/27/2015
|-
|Jim Baker
|Eric Beauchamp
|8/27/2015
|-
|Kyle Bieneman
|Ron Olson
|-
|Glenn Powers
|Jason Shanfield
|10/18/2015
|-
|Niko Hawley
|Eric Beauchamp
|-
|Kevin Mitchell
|Eric Beauchamp
|-
|[[User:themoffatt|Adam Moffatt]]
|Eric Beauchamp
|10/22/2015
|-
|Jean Michel Crettaz
|Eric Beauchamp
|10/22/2015
|-
|-Caleb Young
|-Eric Beauchamp
|-
|Peter Letscher
|Eric Beauchamp
|11/05/15
|-
|Glenn Trussell
|Eric Beauchamp
|11/05/2015
|-
|Aaron Carlock
|Eric Beauchamp
|11/19/2015
|-
|Patrick Lynch
|Eric Beauchamp
|11/19/2015
|-
|Shine Chen
|Eric Beauchamp
|11/19/2015
|-
|Mike Forkan
|Eric Beauchamp
|11/19/2015
|-
|Ethan Sanders
|Eric Beauchamp
|11/19/2015
|-
|Alex Al-Hamdan
|Eric Beauchamp
|12/03/2015
|-
|Alvaro Caceres
|Eric Beauchamp
|12/03/2015
|-
|Kevin Schwartzenberg
|Eric Beauchamp
|12/03/2015
|-
|Kelly Steensma
|Eric Beauchamp
|11/19/2015
|-
|Dan (Mike) Arwine
|Eric Beauchamp
|11/19/2015
|-
|Connor Sullivan
|Eric Beauchamp
|1/8/2016
|-
|Chris Kohl
|Eric Beauchamp
|1/8/2016
|-
|Erik Funkhouser
|Ron Olson
|11/01/2015
|-
|Peter Brask
|Eric Beauchamp
|1/14/16
|-
|Andrew Dalesandro
|Eric Beauchamp
|1/14/16
|-
|Shelly Loke-Gayares
|Eric Beauchamp
|1/14/16
|-
|Christopher Carson
|Eric Beauchamp
|2/25/16
|-
|Jared K
|Andy L
|3/03/16
|-
|Brian Cuocci
|Andy L
|3/17/16
|-
|Julie Zwolinski
|Eric Beauchamp
|3/24/16
|-
|Nick Puglisi
|Eric Beauchamp
|4/21/16
|-
|Andy Muhic
|Andy Larkin
|4/28/16
|-
|Colin Campbell
|Andy L
|5/5/16
|-
|Hans Griese
|Andy Larkin
|5/5/16
|-
|Spencer Simms
|Eric Beauchamp
|05/19/2016
|-
|Josh Younger
|Eric Beauchamp
|5/19/16
|-
|Ian Monroe
|Eric Beauchamp
|5/19/16
|-
|Joseph Juhnke
|Eric Beauchamp
|6/20/16
|-
|Donald Wells
|Andy Larkin
|8/4/16
|-
|An Phan
|Andy Larkin
|7/7/16
|-
|Derwin Umali
|Andy Larkin
|8/4/16
|-
|Simon Pyle
|Andy Larkin
|-
|Max Rashes
|Ken Burkhardt
|9/20/16
|-
|Logan Price
|Andy Larkin
|11/21/16
|-
|Kris Blouch
|Andy Larkin
|11/21/16
|-
|Tony Iacullo
|Andy
|12/5/16
|-
|Matt Schaid
|Andy Larkin
|01/05/17
|-
|Jamie Vollmer
|Andy Larkin
|01/05/17
|-
|Chris Ruhland
|Andy Larkin
|01/05/17
|-
|John McBride
|Andy Larkin
|01/19/17
|-
|Will Heil
|Andy Larkin
|01/19/17
|-
|Dusty Buyck
|Andy Larkin
|01/19/17
|-
|Ashley Borg
|Andy Larkin
|4/13/17
|-
| [[User:Andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| 2017-04-25
|-
|Molly Adamski
|Ralph Brendler
|4/27/17
|-
|Shabab Mustafa
|Ralph Brendler
|4/27/17
|-
|Brett Sanderson
|Ralph Brendler
|4/27/17
|-
|Crystal Zapata
|Ralph Brendler
|4/27/17
|-
|Alexa Viscius
|Ralph Brendler
|4/27/17
|-
|David Earl
|Ralph Brendler
|5/4/2017
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Kari Danek
|Ralph Brendler
|6/16/17
|-
| [[User:spektre1|Danielle MacDonald]]
| Ralph Brendler
| 2017-06-29
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-}

[[Category:Shop Equipment]]
[[Category:Fabrication]]
[[Category:Wood Shop]]

Drill Press Craftsman 20in woodshop

2017-12-01T04:24:52Z

Wittnl: authorization

{{Template:EquipmentPage
|owner=PS:One
|model=
|serial=
|arrived=
|doesitwork=yes
|contact=[[user: ericbeau|Eric Beauchamp]]
|where=Wood Shop
|certification=yes
|hackable=no
|value=$500
|image=Craftsman20Drill.jpg
|hostarea=Wood Shop
}}

The Craftsman 20" drill press is the primary drill press in the wood shop. Authorization is included in the general wood shop authorization. For upcoming authorizations, see the [https://pumpingstationone.org/events/ calendar].

== Safety ==
The [[:file:Craftsman20_drill_manual.pdf|user manual is available here]].

==Maintenance==
Per the [[:file:Craftsman20 drill manual.pdf|user manual]], the drill should be periodically cleaned of dust, the table wiped with wax to prevent rust, and (if needed) the quill lubricated with a dry lubricant like silicone or graphite. Users should perform this maintenance as the drill is used, and PS1 should inspect the drill monthly.

===Maintenance history===

* '''July 10, 2017.''' Drill press motor is not fully connected. Belt may be rubbing on the housing.
* '''July 14, 2017.''' One of the two posts that adjusts the motor position is missing its nut. Also, there is a rack-and-pinion lever that moves the motor in and out, and one of the posts had skipped a tooth. I worked it back into position, and I believe it is now safe to use, despite the missing nut. Replacing the nut will require removing the motor, which is a two-person job.
* '''July 18, 2017.''' This is fixed now. For the record, the missing nut was M12-1.75. I put some "purple" locktite on both nuts, so hopefully we won't have to take it apart again.

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Eric Beauchamp
|Danger committee
|
|-
| [[User:andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| April 26, 2017
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|[[User:spektre1|Danielle MacDonald]]
|Ralph Brendler
|2017-06-29
|-
|Christophe Laurent
|Ralph Brendler
|8/10/17
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Arjun Sharma
|Ralph Brendler
|8.10.17
|-
|Justin Pestka
|Ralph Brendler
|8.30.17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-}

[[Category:Shop Equipment]]
[[Category:Wood Shop]]

Bosch Sliding Compound Miter Saw

2017-12-01T04:23:56Z

Wittnl: authorization

{{Template:EquipmentPage
|owner=PS:One
|model=GCM12SD
|serial=610003177
|arrived=
|doesitwork=yes
|contact=[[user: ericbeau|Eric Beauchamp]]
|where=Wood Shop
|certification=yes
|hackable=no
|value=$500
|image=BoschMiter.jpg
|hostarea=Wood Shop
}}

== Notes ==

== Safety ==

== Maintenance ==
[[Bosch_Sliding_Compound_Miter_Saw_maintenance| Bosch miter saw maintenance]]

[[Category:Shop Equipment]]
[[Category:Wood Shop]]

==Outside Links==

*[https://content.abt.com/documents/50981/GCM12SD_manual.pdf/93000-93999/93762.pdf User's Manual]

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Eric Beauchamp
|Danger committee
|-
|Sam Paris
|Andy Larkin
|-
| [[User:andrewvaughan|Andrew Vaughan]]
| Andy Larkin
| April 26, 2017
|-
|Paul McClay
|Ralph Brendler
|5/18/17
|-
|Jim Handley
|Ralph Brendler
|5/13/17
|-
|Zack Sasnow
|Paul Van Lake
|8/3/17
|-
|Justin Pestka
|Ralph Brendler
|8/30/17
|-
|Sam Dreyer
|Ralph Brendler
|8/30/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Ralph Brendler
|9/7/17
|-
|James Beck
|Ralph Brendler
|9/13/17
|-
|James Marco
|Ralph Brendler
|10/5/17
|-
|Mike Thariath
|Ralph Brendler
|10/19/17
|-
|[[User:bnuttin|Benjamin Nuttin]]
|Ralph Brendler
|11/02/17
|-
|Karl Healy
|Ralph Brendler
|11/2/17
|-
|Chinbayar Davaatseren
|Ralph Brendler
|11/2/17
|-
|Tee
|Paul V
|11/09/17
|--
|-
|Nick Fera
|Paul V
|11/09/17
|--
|[[User:frenchy|Jeremie Davis]]
|Ralph Brendler
|11/16/17
|-
|[[User:wittnl|Nathan Witt]]
|Ralph Brendler
|11/30/2017
|-}

Johnson Bandsaw

2017-11-30T03:16:10Z

Wittnl: authorization

{{Template:EquipmentPage
|owner = PS:One
|certification = yes
|hackable = no
|model = Johnson Model J (JD)
|serial = J14445
|arrived = 1/13/14
|doesitwork = yes
|contact = Dean Anderson
|where =
|value = 700
|image =JohnsonMetalBandsaw.jpg
|hostarea = Cold Metals
}}

== Status ==
* A VFD has been fitted, this allows the machine to run on a 110v circuit and provides a variable speed control. The display shows the RPM of the drive wheel (16") * 4 which is approximately blade speed in FPM. The power switch on the left side of the control box applies power to the VFD. The on/off button on the front panel and the limit switch control the blade, the button must be out for on and the limit switch up to run. The button switch serves as an emergency switch, pull for on push for off. The dial controls RPM.
- Jim Brink 12/10/16

* The large groove (fastest speed) of the motor shaft step pulley is bent. The motor vibrates excessively when the belt is in this groove. Use the other grooves (slower speeds) until the pulley is replaced.

'''This tool requires authorization for use.'''

Johnson products are now supported by Dake. http://www.dakecorp.com/ Replacement parts for this saw are generally available.

== Specifications ==
{| class="wikitable" border="1"
|Capacity
|10" rounds, 18" flats
|-
|Blade Size
|137" x 3/4"
|-
|Blade Speed
|FPM = RPM of drive wheel* 4.18
|-
|Power
|120V via VFD, motor is 3/4HP,240V, 3 phase
|-
|Weight
|683 pounds
|-
|Mfg. Date
|1964
|-
|}

== Blades ==
General rule of thumb is that if the thinnest part (in the direction of the blade) that you're cutting isn't at least 3 saw teeth thick, it will damage the blade.

== To-Do ==

Grease pivot bar

Add coolant pan and pump.

Add blade brush.

Post a chart of recommended blade speeds for various materials.

== Maintenance ==
[[Johnson_Bandsaw_maintenance | maintenance page]]

== Major Components ==

<gallery>
File:johnson-bandsaw-main-power-lever.jpg|The main power lever; currently, does not tend to automatically disengage when the saw fully closes
File:johnson-bandsaw-control-panel.jpg|The motor control panel; note: the blade speed readout, the emergency stop button, & the speed control knob
File:johnson-bandsaw-power-plug.jpg|The 110/120V plug on the end of the power cord, attached to the control panel
File:johnson-bandsaw-descent-control-weight.jpg|The descent control weight; the lever unlocks the weight for repositioning
File:johnson-bandsaw-main-spring.jpg|The main tension spring; provides descent resistance, controlled in part by the adjustable weight
File:johnson-bandsaw-hydraulic-valve-control.jpg|The valve control knob for the hydraulic cylinder; controls descent resistance, & can lock the saw open
File:johnson-bandsaw-hydraulic-cylinder.jpg|The hydraulic cylinder, controlled by the needle valve (bottom), which is controlled by the valve control knob; provides descent resistance
File:johnson-bandsaw-builtin-vice.jpg|The fixed (left) & movable (right) jaws of the built-in vice; note also the screw engagement lever, to the right of the movable jaw, and the clamping screw, visible through a slot to the right of the engagement lever
File:johnson-bandsaw-vice-clamping-screw-engagement-lever.jpg|The vice clamping screw engagement lever; note also the clamping screw, visible to the right
File:johnson-bandsaw-vice-control-wheel.jpg|The vice clamping wheel; opens & closes the vice, when the movable jaw is engaged with the clamping screw
File:johnson-bandsaw-blade-guides.jpg|The yellow movable (left) & fixed (right) blade guides; note also the built-in vice
File:johnson-bandsaw-movable-blade-guide-lever.jpg|The movable blade guide control lever; used to control the length of the exposed area of blade
</gallery>

== Auth/Use Notes ==
These notes are for authorized users and authorizers; you must be authorized on the tool by a person, not this list. Don't expect this list to be complete or authoritative.

* Horizontal band saws cut via a vertically descending blades.
* The cutting tooth speed is set by a pulley in the rear and VFD.
** Lift up on the motor to get some slack on the belt.
** Don't cross wheels; keep the pulley belt straight.
** Go toward larger motor wheels for soft metals and plastic and smaller motor wheels for tough metals like steel (and tool steel.)
* The cutting tooth feed is set by a needle valve and a weight on top.
** Be gentle with the needle valve; a single finger with light pressure is enough to adjust it.
* Power
** as of 12/16 a Fluxmaster 50 VFD has been added, for more information on the Fluxmaster see the link in resources. The machine is now powered by 120v. Any 120 volt outlet can be used.
** Power to the VFD is controlled by the toggle switch on the left of the control box.
** The button switch on the front and and the trip lever control the motor. The button must be pulled out and the trip lever up. Both must be 'on' to power the motor.
** RPM is controlled by the dial and the belt position.
** The large display shows approximate blade speed in feet per minute. The smaller display on the VFD shows the output frequency of the VFD and is not needed for operation.
** Turn off switches and unplug the machine when you're done to prevent accidental activation.
** Never walk away from the machine while it's running. We are not a production shop; babysit the machine in case it fails and avoid putting curious people in danger.
* Clamping a workpiece
** Short pieces cock the vice jaws. This ruins the grip on the workpiece and is to be avoided. Componensate by using a block approximately the size of your workpiece or a machinist jack on the far side of the vise jaws.
** Check the width of your workpiece against the teeth.
*** The thinnest section of the workpiece should be wider than three teeth in a row.
*** The thickest section of the workpiece should be narrow than twenty-four teeth.
** If you're cutting angle stock, rotate it so that it forms a < shape to prevent it from rotating.
** If you're cutting round, use angle blocks (in the tooling cabinet) to keep it from rotating.
** Check that the movable blade guide is as close as possible while clearing the vice and the table.
* Safety
** Unplug the machine before adjusting the pulley or changing the blade.
** Never leave the machine while running. We aren't a production shop; you need to be right by the machine in case something goes wrong or if a curious person walks by.
* Clean up when you're done. Don't leave stock in the machine; don't leave chips and coolant behind. Use a small bucket to catch chips before they hit the ground.

== References ==

Manual for the latest version of the Model J (very similar).

http://www.dakecorp.com/manuals/Model%20Johnson%20J%20Saws.pdf

Good link for restoration, including coolant pan dimensions and bearing sizes. http://www.shopfloortalk.com/forums/showthread.php?t=21021

Manual for Fluxmaster 50.

https://www.tecowestinghouse.com/Manuals/FM50%20Instruction%20&%20User%20Manual_0405.pdf

Rebuilding video series
https://www.youtube.com/watch?v=TEq7_pH7Uws

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Dean Anderson
|
|-
|Todd Allen
|Ed Bennet
|-
|David Morton
|Anna Yu
|-
|George Shaw
|Thomas Wright
|-
|bandit Gangwere
|Ed Bennet
|-
|Michael Skilton
|Tucker
|-
|Eric Stein
|Tucker
|-
|Kyle Bieneman
|Todd Allen
|-
|Scott Little
|Todd Allen
|-
|RJ Metzger
|Todd Allen
|-
|Giovanni Arroyo
|Todd Allen
|-
|Mark C.
|Todd Allen
|-
|Joao Santos
|Todd Allen
|-
|Nicholas Haldereman
|Todd Allen
|-
|Doorman Dave
|Todd Allen
|-
|Stephen Ioannou
|Todd Allen
|-
|Lucas Goossen
|Todd Allen
|-
|[[user:RogerMoore|Roger Moore]]
|Todd Allen
|-
|[[User:Mwilkens|Matt Wilkens]]
|Todd Allen
|-
|Rhonda Jackson
|Todd Allen
|-
|Matt Meshulam
|Todd Allen
|-
|Kevin Pulver
|Todd Allen
|-
|Andrew Camardella
|Todd Allen
|-
|Mike Coriale
|Todd Allen
|-
|John Farmer
|Todd Allen
|-
|[[user:Jaypee|Jay Pee]]
|Todd Allen
|-
|Sam Paris
|Todd Allen
|-
|Jake Rush
|Todd Allen
|-
|Carolyn Ignacio
|Todd Allen
|-
|Andrew Sowa
|Todd Allen
|-
|Hilary Lee
|Todd Allen
|-
|Eric Slehofer
|Todd Allen
|-
|Sam Reicks
|Todd Allen
|-
|Tyler Matthew
|Todd Allen
|-
|Ben Bogler
|Todd Allen
|-
|Brittany Krawczyk
|Todd Allen
|-
|Cary Lahucik
|Todd Allen
|-
|Eric Yu
|Todd Allen
|-
|Davis Mazariegos
|Todd Allen
|-
|Dan Baltudis
|Todd Allen
|-
|Ryan Taylor
|Everett Wilson
|-
|Andy Richardson
|Everett Wilson
|-
|David Srebro
|Todd Allen
|-
|Shae Kurko
|Todd Allen
|-
|Simon Cygielski
|Todd Allen
|-
|Jeff Lawson
|Ron Olson
|-
|James Villalpando
|Ron Olson
|5/19/15
|-
|Greg "Nerobro" Teiber
|Everett Wilson
|-
|Pericles Tsellos
|Todd Allen
|14JUN2015
|-
|Hunter Koerner
|Todd Allen
|6/14/15
|-
|Eric Reusche
|Todd Allen
|-
|Raj Perera
|Todd Allen
|6/14/15
|-
|Erik Wessing
|Todd Allen
|-
|Ryan Neuman
|Ron Olson
|-
|Kevin Sampson
|Todd Allen
|7/22/15
|-
|Jim Baker
|Todd Allen
|-
|Tom Boeman
|Todd Allen
|8/30/15
|-
|Jonathan Levine
|Todd Allen
|9/23/15
|-
|Alejandro Drexler
|Todd Allen
|9/23/15
|-
| Sheila Miguez
| Everett Wilson
| 10/14/2015
|-
|Niko Hawley
|Todd Allen
|-
|Will Alt
|Todd Allen
|10/28/15
|-
|Peter Letscher
|Todd Allen
|10/28/15
|-
|Aaron Carlock
|Todd Allen
|11/18/15
|-
|Jennie P
|Todd Allen
|11/18/15
|-
|Kurt Ziegel
|Todd Allen
|11/18/15
|-
|Mike Forkan
|Ron Olson
|11/18/15
|-
|Marcin Ignasiak
|Ron Olson
|-
|Greg Kudlacz
|Todd Allen
|-
|Daniel Maziarz
|Todd Allen
|-
|-
|Jean Michel Crettaz
|Todd Allen
|12/14/15
|-
|Dafe Hughes
|Todd Allen
|12/16/15
|-
|Lauren Svedman
|Michael Patton
|1/06/16
|-
|Bruce McConachie
|Michael Patton
|1/10/16
|-
|Andrew Dalesandro
|Michael Patton
|1/10/16
|-
|Tony Johnson
|Michael Patton
|1/10/16
|-
|Brandon Love
|Michael Patton
|1/27/16
|-
|Connor Sullivan
|Tom Judge
|1/22/16
|-
|Adam Stafford
|Michael Patton
|4/17/16
|-
|Ian Monroe
|Michael Patton
|6/29/16
|-
|Joe Iklov
|Michael Patton
|6/29/16
|-}
|Jim Brink
|Michael Patton
|6/29/16
|-
|Frank Bowles
|Michael Patton
|6/29/16
|-
|Eugene Liokumovich
|Michael Patton
|-
|Sam Olendorf
|Michael Patton
|-
|Matthew Quigley
|Michael Patton
|-
|Brian Cuocci
|Michael Patton
|10/5/16
|-
|[[User:jonk|Jon Komperda]]
|Dean Anderson
|11/6/16
|-
|Abel Greenwald
|Michael Patton
|-
|[[User:jonk|Jon Komperda]]
|Dean Anderson
|11/6/16
|-
|Jason Pittman
|Chris Ruhland
|03/07/17
|-
|Bruce Mace
|Chris Ruhland
|3/7/17
|-
|Bhairavi Warke
|Chris Ruhland
|3/23/17
|-
|Brian Adamson
|Chris Ruhland
|3/23/17
|-
|Bob Loos
|Chris Ruhland
|3/23/17
|-
|Jeremy Shaw
|Chris Ruhland
|4/09/17
|-
|Sam Chen
|Chris Ruhland
|-
|Molly Adamski
|Chris Ruhland
|4/09/17
|-
|Carlos Garcia
|Chris Ruhland
|5/17/17
|-
|Ben Stringer
|Chris Ruhland
|5/17/17
|-
|Luis Colmenares
|Sam
|6/12/17
|-
|Andrew Wingate
|Todd Allen
|7/17/17
|-
|Joanna C.
|Sam O.
|9/27/17
|-
|Sean Nixon
|Sam Ohlendorf
|9/27/17
|-}

|Mateusz Pec
|Sam Ohlendorf
|9/27/17
|-

|[[User:Bobbyh|Bobby Huggins]]
|Sam Olendorf
|11/15/17
|-

|Ryan Himmelblau
|Sam Ohlendorf
|11/15/17
|-

|[[User:wittnl|Nathan Witt]]
|Sam Ohlendorf
|11/29/17
|-

[[Category:Cold Metals]]

User:Wittnl

2017-11-30T03:14:59Z

Wittnl: Created blank page

Rockwell drill press

2017-11-30T03:14:36Z

Wittnl: authorization

{{Template:EquipmentPage
|image =
|owner=PS:One
|model=Rockwell 17-600 17" Drill Press
|arrived=December 2016
|serial=1456658
|doesitwork=yes
|contact=Dean Anderson
|where=Cold Metals
|certification=yes
|hackable=no
|value=$500}}

== Specifications ==
17" capacity (from the center of the spindle to the column).

VFD controlled 3 phase motor. Continuously variable spindle speed from 250-1470 RPM.

Morse #2 taper spindle

Capacity, mild steel 1/2"

Drills to center 17"

motor: 1 HP 3 phase

power: 120 V.

Weight: 400 pounds

== Auth/Use Notes ==
Recommended Drill Protocol:
#A full set of fractional, number and letter drills are available in a index case next to the drill. Use a drill from this case if one is available and usable. If a drill is unusable repair it or put it into the discarded drill tray.
#If no drill is available or usable in the index case take one from the cabinets.
#When you are through with the drill replace it into the index case.
#With this procedure users can be assured that drills from the cabinet are new and drills from the index case may be OK but should be checked.

These notes are for reference after authorization by a person.

The spindle switch must be 'off' and the e-stop (big red button) must be in the out position (twist the button counter clockwise) before the spindle can be turned on.

Authorizations from the old DoAll drill press carry over to this machine.

The motor direction is reversible using a switch on the back of the control box. For nearly all drills, the spindle must rotate clockwise when viewed from above.

Operation:
# Setup material securely on the table. Be sure the drill will not drill into the table.
# Turn e-stop counter clockwise
# Turn on power switch on the back of the control box
# Set the RPM based on the material being drilled and the drill diameter.
# Set the direction switch on the back of the control box to 'forward'.
# Move the spindle switch to 'on' when you are ready to drill.
# To turn off, push the e-stop or move the spindle switch to the 'off' position.

== To-Do ==
A drill mounted in the chuck will have some run out. For most applications this should be acceptable. The cause could be a bent spindle or worn chuck.

We should to have a chart nearby showing recommended spindle speeds for various drill sizes and materials.

== Maintenance ==

== Equipment ==

Drills and vises are stored in the cabinet in front of the drill press.

== References ==

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Dean Anderson
|
|
|-
|Everett Wilson
|Dean Anderson
|
|-
|Bruce Mace
|Chris Ruhland
|3/7/17
|-
|Brian Adamson
|Chris Ruhland
|3/23/2017
|-
|Jeremy Shaw
|Chris Ruhland
|4/09/2017
|-
|Molly Adamski
|Chris Ruhland
|4/09/2017
|-
|Carlos Garcia
|Chris Ruhland
|5/17/2017
|-
|Ben Stringer
|Chris Ruhland
|5/17/2017
|-
|Arjun Sharma
|Tom Judge
|8/10/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Sam Olendorf
|9/13/17
|-
|Sean Nixon
|Sam Olendorf
|9/27/17
|-
|Mateusz Pec
|Sam Olendorf
|9/27/17
|-
|[[User:Bobbyh|Bobby Huggins]]
|Sam Olendorf
|11/15/17
|-
|Ryan Himmelblau
|Sam Olendorf
|11/15/17
|-
|[[User:wittnl|Nathan Witt]]
|Sam Ohlendorf
|11/29/17
|-
[[Category:Cold Metals]]

DoAll Bandsaw

2017-11-30T03:12:14Z

Wittnl: authorization

{{Template:EquipmentPage
|owner = PS:One
|certification = yes
|hackable = no
|model = DoAll 16-2
|serial = 45-55525
|arrived = 9/19/14
|doesitwork = yes
|contact = Dean Anderson
|where = Cold Metals
|value = 900
|image = DoAllMetalBandsaw.jpg
|hostarea = Cold Metals
}}

'''This tool requires certification for use.'''

== Specifications ==
{| class="wikitable" border="1"
|Capacity
|16" from the blade to the column
|-
|Blade Size
|120" blade. Width up to 1". Each width requires a set of hardened steel guides and a holder. See below for the guides we have.
|-
|Blade Speed
|approximately 45 to 1600 FPM, continuously variable.
|-
|Power
|240V, 3 phase
|-
|Weight
|1500-2000 pounds
|-
|Mfg. Date
|1955
|-
|}

== Auth/Use Notes ==
These notes are for authorized users and authorizers; you must be authorized on the tool by a person, not this list. Don't expect this list to be complete or authoritative.

* Vertical band saws cut by feeding the material into the blade.
** The cutting tooth speed is set by spinning the speed adjustment handle.
** Selection between high and low gear is only done when the adjustment handle is spun to the slowest possible speed. Don't force the gear selection; wiggle it into place.
** Only adjust the speed when the machine is on.
** The speed read out is on the dial on the top left part of the machine.
** ''Always'' check the speed versus your material via the read out before making any cuts. Incorrect speeds will quickly ruin blades.
* The cutting feed is set by you, pushing the material into the blade.
** There is a half-circle with steps for workholding and handles to control the piece. Use it whenever possible.
** If cutting curves, check the width of the blade against the chart for the tightest corner you can cut.
** If you're attempting to cut an angle, start by feeding the workpiece directly into the saw to form a notch first.
** The angle of the table can be changed after loosening the knob on the right side of the machine and below the table. Then tilt the table by hand. You may have to adjust the height of the lower blade guide if you tilt the table far from horizontal.
** If the blade is drifting to one side, it might be dulling.
** Ensure that you have between 3 and 24 teeth engaged with the thickness of the workpiece. Too few and you will knock teeth off; too many and you will fail to form a satisfactory chip.
* Power
** The plug is a twist-lock 220V three-phase plug.
** The starter is a grey box on the back of the machine. Press the rocker to display "ON".
** Turn the key to the "on" position.
** Use the larger side buttons to start the machine. The on button may require multiple presses.
** Always hit the red stop button when you're not actively cutting.
** Set the starter to off and unplug the machine when you're finished.
* Safety
** Never put your fingers near the blade. If your part is too small to keep your fingers at least an inch away from the blade and can't be held in the half-circle workholder, design a way to safely hold the workpiece that doesn't put your fingers near the blade.
** Lower the blade guard as much as possible; there should be a narrow gap above the workpiece and no more.
** No gloves or loose sleeves when using the machine; they can be sucked into the blade and drag your arm with. Pushing your sleeves past your shoulder is not acceptable.
** When pushing work, rest your arms on the table and push with your hands. Pushing with your shoulders can cause you to fall into the machine if the blade breaks or the part slips.
** Stand with one foot in front of the other to prevent bashing your head or chest into the machine if you do lose control with your arms.
* Clean up when you're done. Remove your stock and brush all chips into a trash can. Wipe up all cutting fluids.

== Blades ==
Installed:

== Welder ==

The welder is finally functioning. It can be used for blades for any of the bandsaws. So far, we have just welded carbon blades. Bimetal may be difficult- brazing might be a better choice for these. Talk to Ed Bennett or Everett Wilson if you want to learn how to use the welder. The procedure is:
#Measure 120" (5 table lengths) of the bulk blade of your choice.
#Cut the blade to length using the shear above the welder.
#Match the cut ends together with the teeth on each end pointing in opposite directions (180 degree twist in the blade). Grind the ends of the blade until they match and are smooth. Normally you could use the grinder on the welder, but the grinder is not working.
#Clamp the blade in the jaws with the ends of the blade touching.
#Push the welder lever down and hold it down. After the weld is done, release one of the jaw clamps, then release the welder lever.
#Anneal the blade until dull red (pulse width modulate the anneal button - it doesn't take much).
#Grind the weld until smooth and the weld thickness is the same as the blade.

== To-Do ==

Blade welder is missing the grinder motor. The shear for the welder is not making clean cuts.

Add a miter jig which mounts to the right side of the table. A round linear bearing would allow the jig to be tilted down out of the way when not in use.

== Maintenance ==
*manual: [[File:DoAll_saw.pdf]]
*[[DoAll_Bandsaw_maintenance|maintenance page]]

{| class="wikitable" border="1"
! Description
! Frequency
! Lubricant
! Instructions
! History
|-
|
|
|
|
|
|-
|Gear Box
|
|The manual for model 16-2 (our saw) says to use SAE 10 motor oil. The manual for the 1612 (a slightly newer model) says SAE 20. DoAll support says use SAE 20 motor oil, which is difficult to find. ISO 68 waylube is equivalent to SAE 20 and available from Zengers in Melrose Park.
| The drain plug is at the bottom of the gear box. Remove pipe cap and fill to the top of the pipe. Takes about 1 quart.
| Changed 10/7/14 with ISO 68. Only about 2 cups of oil were drained, but no sign of a leak.

|
|-
|Reeves drive shaft (oil cup)
|
| 1612: SAE 10
|
|
|}

Oct. 15, 2014 Replaced thrust bearings and bearing caps for the 1/16-1/2" upper and lower guides. With the blade centered on the wheel, there is a gap of about 1/8 between the cap and the back edge of the blade. With medium heavy hand feed, the blade doesn't touch the cap and cause the bearing to turn. This may be OK, as there would be significantly more pressure from the workpiece when using the machine's mechanical feed.

Tried the 5/8-1" guides. appears that there will also be a gap between the blade and thrust bearing cap when using a 3/4" blade with the blade centered on the wheel. For the upper guide, we need 2 longer cap screws (1/4-20?) to hold the 3/4" hardened guides to the guide block and 2 shorter screws (shoulder?) to hold the guide block to the guide post. For the lower guide, 2 cap screws. not sure about the screw that holds the lower guide block in place.

== Equipment ==
{| class="wikitable" border="1"
! Item
! Description
! Supplier
! Cost
|-
| Guide thrust bearing
| 626ZZ 6x19x6mm (2 required)
|
|
|-
| Guide Blocks
| Upper and lower insert guide blocks for 1/16-1/2" width blades ('precision' style); upper and lower insert guide blocks ('high speed' style) for 5/8" to 1" width blades.
|
|
|-
| Inserts
| Sets of 4 hardened steel inserts for 1/4", 3/8", 1/2", 3/4".
|
|
|-
|Adapter
|We have the upper and lower Adapters for 1/16 to 1/2" guide blocks.
|
|
|}

== References ==

== List of Currently Authorized Users ==
{| class="wikitable" border="1"
! Qualified Member
! Trained By
! Date
|-
|Dean Anderson
|Machine Shop Host Cred
|
|-
|Everett Wilson
|Dean Anderson
|
|-
| Ed Bennett
| Dean Anderson
|
|-
|Ryan Pierce
|Dean Anderson
|
|-
|Bryan Gleason
|Dean Anderson
|
|-
|Michael Czubak
|Dean Anderson
|
|-
|Todd Allen
|Dean Anderson
|
|-
| Anna Yu
| Ed Bennett
|
|-
|Jeff McBride
|Ed Bennett
|10/9/14
|-
|Mike Kislovsky
|Ed Bennett
|10/9/14
|-
|Arjun Wadnerkar
|Ed Bennett
|10/9/14
|-
|Oscar Villareal
|Ed Bennett
|10/9/14
|-
|John Butera
|Ed Bennett
|10/18/14
|-
|Alex Schaffer
|Ed Bennett
|10/18/14
|-
|Daniel Loeser
|Ed Bennett
|10/18/14
|-
|Jonathan Bisson
|Ed Bennett
|10/18/14
|-
|[[User:amishhammer|Tom Judge]]
|Todd Allen
|
|-
|Kyle Bieneman
|Todd Allen
|11/09/14
|-
|Scott Little
|Todd Allen
|11/09/14
|-
|RJ Metzger
|Todd Allen
|11/09/14
|-
|Giovanni Arroyo
|Todd Allen
|11/09/14
|-
|Joao Santos
|Todd Allen
|11/26/14
|-
|Nicholas Haldereman
|Todd Allen
|11/26/14
|-
|Doorman Dave
|Todd Allen
|11/26/14
|-
|Stephen Ioannou
|Todd Allen
|11/26/14
|-
|Lucas Goossen
|Todd Allen
|12/10/14
|-
|[[user:RogerMoore|Roger Moore]]
|Todd Allen
|12/10/14
|-
|[[User:Mwilkens|Matt Wilkens]]
|Todd Allen
|12/10/14
|-
|Rhonda Jackson
|Todd Allen
|12/10/14
|-
|Matt Meshulam
|Todd Allen
|12/21/14
|-
|Kevin Pulver
|Todd Allen
|12/21/14
|-
|Andrew Camardella
|Todd Allen
|12/21/14
|-
|Mike Coriale
|Todd Allen
|12/21/14
|-
|Nick Naro
|Todd Allen
|1/11/15
|-
|John Farmer
|Todd Allen
|1/11/15
|-
|[[user:Jaypee|Jay Pee]]
|Todd Allen
|1/11/15
|-
|Sam Paris
|Todd Allen
|1/21/2015
|-
|Jake Rush
|Todd Allen
|1/21/2015
|-
|Carolyn Ignacio
|Todd Allen
|1/21/2015
|-
|Andrew Sowa
|Todd Allen
|1/21/2015
|-
|Hilary Lee
|Todd Allen
|1/21/2015
|-
|Eric Slehofer
|Todd Allen
|1/28/2015
|-
|Sam Reicks
|Todd Allen
|1/28/2015
|-
|Tyler Matthew
|Todd Allen
|1/28/2015
|-
|Ben Bogler
|Todd Allen
|1/28/2015
|-
|Brittany Krawczyk
|Todd Allen
|1/28/2015
|-
|Cary Lahucik
|Todd Allen
|1/28/2015
|-
|Eric Yu
|Todd Allen
|2/8/2015
|-
|Davis Mazariegos
|Todd Allen
|2/8/2015
|-
|Dan Baltudis
|Todd Allen
|2/8/2015
|-
|Shae Kurko
|Todd Allen
|2/25/2015
|-
|Ryan Taylor
|Everett Wilson
|03/04/15
|-
|Andy Richardson
|Everett Wilson
|03/04/15
|-
|[[User:glenn|Glenn Powers]]
|Sevin Straus
|03/08/15
|-
|Ryan Neuman
|Sevin Straus
|3/08/15
|-
|Simon Cygielski
|Todd Allen
|20150407
|-
|[[User:papaben44|Benjamin Dambman]]
|Matt Triano
|4/14/15
|-
|Jeff Lawson
|Ron Olson
|5/19/15
|-
|David Srebro
|Ron Olson
|5/19/15
|-
|James Villalpando-
|Ron Olson
|5/19/15
|-
|[[user:justin|Justin T. Conroy]]
|Everett Wilson
|2015/06/10
|-
|Greg "Nerobro" Teiber
|Everett Wilson
|2015/06/10
|-
|Pericles Tsellos
|Todd Allen
|14JUN2015
|-
|Hunter Koerner
|Todd Allen
|6/14/15
|-
|Eric Reusche
|Todd Allen
|6/14/15
|-
|Raj Perera
|Todd Allen
|6/14/15
|-
|Erik Wessing
|Todd Allen
|6/14/15
|-
|Connor Jansen
|Eric Beauchamp
|6/4/15
|-
|Kevin Sampson
|Todd Allen
|7/22/15
|-
|Les Schier
|Dean Anderson
|
|-
|Tom Boeman
|Todd Allen
|8/30/15
|-
|Jonathan Levine
|Todd Allen
|9/23/15
|-
|Jim Baker
|Todd Allen
|
|-
|Alejandro Drexler
|Todd Allen
|9/23/15
|-
|Sheila Miguez
|Everett Wilson
|10/14/2015
|-
|Niko Hawley
|Todd Allen
|
|-
|Will Alt
|Todd Allen
|10/28/15
|-
|Peter Letscher
|Todd Allen
|10/28/15
|-
|Mike Mandrea
|Eric Beauchamp
|11/5/15
|-
|-Caleb Young
|-Eric Beauchamp
|
|-
|Aaron Carlock
|Todd Allen
|11/18/15
|-
|Jennie P
|Todd Allen
|11/18/15
|-
|Kurt Ziegel
|Todd Allen
|11/18/15
|-
|Mike Forkan
|Todd Allen
|11/18/15
|-
|Marcin Ignasiak
|Todd Allen
|
|-
|Greg Kudlacz
|Todd Allen
|
|-
|Daniel Maziarz
|Todd Allen
|
|-
|Jean Michel Crettaz
|Todd Allen
|
|-
|Dafe Hughes|Dafe Hughes
|Todd Allen
|12/16/15
|-
|Lauren Svedman
|Michael Patton
|1/06/16
|-
|Bruce McConachie
|Michael Patton
|1/10/16
|-
|Andrew Dalesandro
|Michael Patton
|1/10/16
|-
|Tony Johnson
|Michael Patton
|1/10/16
|-
|Brandon Love
|Michael Patton
|1/27/16
|-
|Connor Sullivan
|Tom Judge
|1/22/16
|-
|Adam Stafford
|Michael Patton
|4/17/16
|-
|Ian Monroe
|Michael Patton
|6/29/16
|-
|Joe Iklov
|Michael Patton
|6/29/16
|-
|Jim Brink
|Michael Patton
|6/29/16
|-
|Frank Bowles
|Michael Patton
|6/29/16
|-
|Eugene Liokumovich
|Michael Patton
|
|-
|Sam Olendorf
|Michael Patton
|
|-
|Matthew Quigley
|Michael Patton
|
|-
|Brian Cuocci
|Michael Patton
|10/5/16
|-
|[[User:jonk|Jon Komperda]]
|Dean Anderson
|11/6/16
|-
|Chris Ruhland
|Michael Patton
|11/7/16
|-
|[[User:ajasani|Ashish Jasani]]
|Michael Patton
|11/7/16
|-
|Abel Greenwald
|Michael Patton
|
|-
|Jason Pittman
|Chris Ruhland
|03/07/17
|-
|Bruce Mace
|Chris Ruhland
|3/7/17
|-
|Bhairavi Warke
|Chris Ruhland
|3/23/17
|-
|Brian Adamson
|Chris Ruhland
|3/23/17
|-
|Jeremy Shaw
|Chris Ruhland
|04/09/17
|-
|Sam Chen
|Chris Ruhland
|
|-
|Molly Adamski
|Chris Ruhland
|04/09/17
|-
|Haddon Pearson
|Chris Ruhland
|4/29/17
|-
|Carlos Garcia
|Chris Ruhland
|5/17/17
|-
|Ben Stringer
|Chris Ruhland
|5/17/17
|-
|Luis Colmenares
|Sam
|6/12/17
|-
|Andrew Wingate
|Todd Allen
|7/17/17
|-
|Sam Yi
|Ralph Brendler
|7/27/17
|-
|[[User:Ekaj|Jacob Snyder]]
|Sam Olendorf
|9/14/17
|-
|[[User:Bobbyh|Bobby Huggins]]
|Sam
|9/15/17
|-
|Ryan Himmelblau
|Sam Ohlendorf
|11/15/17
|-
|[[User:wittnl|Nathan Witt]]
|Sam Ohlendorf
|11/29/17
|-
|}

[[Category:Cold Metals]]

Member Manual

2017-11-25T17:27:39Z

Wittnl: The people primarily responsible for the various shops in the hackerspace are the *Area Hosts*

<span style="float:right; width:200px; text-align:right;">Last Edited: {{REVISIONMONTH}}/{{REVISIONDAY}}/{{REVISIONYEAR}}</span>

== Welcome ==
Welcome to the Pumping Station: One, Chicago's premiere hackerspace. We do woodworking, software, metalworking, art, crafts, electronics, chemistry, power wheel racing, TARDIS building, green technology, nanotechnology, tinkering, dismantling of robots, assembling of robots, music, biotechnology, CNC, and the many ways all those subjects (and more) intersect and collaborate.

== Quick list of things to do==
===Important Documents===
* Read the [[Bylaws]]
* Read the [[Membership agreement]]
* Read our [[Policies]]

===Things to do===
* Sign the [[:File:Liability-waiver.pdf|waiver]]
* Join the [[Contact Points|mailing lists]]
* Come to Member Meetings to see whats going on and meet other members
* Build something awesome
* Join a class and learn something new
* Start a class and inspire someone
* [[Wiki Editing|Edit the Wiki]]
* Ask Questions!

== Your Role (as a Member) ==
As a member of Pumping Station: One, you aren't just buying shared use of a workshop, you're joining a community of people who love learning and making things, and sharing their knowledge with others. That learning and sharing ethos is what makes a hackerspace great, so embrace it to the greatest extent that you can.

This hackerspace belongs to and is controlled by its members, so by joining up, '''It's your hackerspace'''. If you see something wrong or broken, fix it. (or if you don't know how, bring it to the attention of someone who does and offer to help; you'll learn something!) If you want something to work differently, make it happen (the board, area hosts, and other long time members can usually be of help here). You as a member are allowed to be at the space any time! Talk to a board member to get your keycode, fob, or key. We'll work out which one you get.

=== Meetings ===

Every Tuesday night at 8pm we have an open house. You probably attended one of these before you became a member. Everyone is encouraged to come on Tuesday nights to see what other people are working on and share ideas. It's always full of activity and lots of fun.

Before the open house, we have a meeting of our Board of Directors. It's mostly about facility maintenance, paying bills, and whatever other issues we're dealing with at the moment. If you don't want to attend but want to stay in the loop, you can [[:Category:Board_Meetings | read the meeting minutes]].

=== Orientation Program ===

You're required to go to the PS1 Orientation class within 3 months of joining if you haven't already! Please see [[Orientation Program Policy]].

==== At your first meeting ====

The first time you attend a meeting, be sure to do a couple things:
* Sign a [http://dl.dropbox.com/u/8139855/liability-waiver.pdf waiver] - '''VERY IMPORTANT''' everyone who walks in the door must sign a waiver, including guests.
* Introduce yourself at the meeting.
* Get a tour - an official tour leader should be announced during the meeting.

=== Voting ===
Most decisions are made by a vote of the full members. Here's how voting works:
* Full members may propose votes.
* Only full members in good standing may vote.
* As a required step, the vote proposal is run past the board of directors for proper wording, etc. - this helps prevent people from disagreeing with your proposal because it's written poorly.
* The proposing member places the item before the membership (BOTH on mailing list and during a meeting) at least 7 days prior to a meeting.
* During this period, people may read and discuss the proposal, and offer their own counter-proposals.
* At the next scheduled meeting, the proposal and any counter proposals are voted on.

=== Board of Directors ===

Pumping Station: One is a direct democracy of its full members, but most of the heavy lifting is delegated to [[The Board|the board of directors]] . They pay the bills and coordinate things behind the scenes. If you have any questions, you can talk to one of them during a meeting or email them at info@pumpingstationone.org.

== Facility Operations ==

The people primarily responsible for the various shops in the hackerspace are the Area Hosts. They are volunteers who maintain their areas and frequently certify people on their area's tools.

=== Power Tools ===
YOU NEED TO BE CERTIFIED BEFORE YOU CAN USE ANY POWERTOOLS! A list of certified members is listed by each power tool or on the item's [[Equipment]] page.

If you break a tool, the WORST thing you can do is to make it look like it's not broken and leave before anyone notices. Someone could literally be killed. What you should do, in order of preference, is:
* fix it, if you are capable
* put a "broken" sign on it if you can't fix it,
* tell the mailing list what is broken about the tool and figure out how to fix it.
We understand that accidents happen, and you will not be called out or derided for a simple accident. You may have to be re-certified on the tool before you can use it again.

=== Workshops/Classes ===

Most workshops and classes are done on a per-interest basis. Some of them are more regular than others, like Circuit Hacking Wednesdays.

:''read more: [[Main Page#Classes|Classes]]''

==== Interested in Learning? ====

Feel free to come by any of the advertised events on the calendar. Some workshops require you to be a member or to pay a parts fee. Read the fine print. If there's some class you'd like taught please ask around the membership to see if there are others interested and if anyone can teach the class or if we need to call in a professional.

==== Interested in Teaching? ====
# Pick a topic
# Gauge interest from the membership
# Pick a date
# Talk to a Board member to get your event put on the calendar or email info @ pumpingstationone.org for help

[[Category:Hosted Areas|Area Hosts]]
[[Category:Membership]]
[[Category:New Members]]