View source for Tormach 1300PL CNC Plasma Cutter

{{Template:EquipmentPage
|image=IMG_4845.jpeg
|owner=PS:One
|model=Tormach 1300PL
|serial=PA10064
|arrived=December, 2022
|doesitwork=yes
|contact=Ron Olson
|where=Hot Metals
|certification=yes
|hackable=no
|value=$20,000
|hostarea = Hot Metals
}}
== Description ==
Will fill this in later. work area, capacities 
Tormach 1300PL manual https://tormach.com/media/asset/u/m/um10720_1300pl_0722a_web.pdf
Hypertherm Powermax45 XP plasma cutter manual https://www.hypertherm.com/en-US/hypertherm/powermax/powermax45-xp/ 

==Consumables==


== Tool Chains ==
work in  progress
Remote/cloud access. Pathpilot hub https://hub.pathpilot.com/about

== Maintenance ==
(Shamelessly copied from page 58 in the manual)
=== Daily ===
* Clean the machine of any dust or abrasive particle buildup with a vacuum and brushes.
* Wipe dust off of the linear rails with a clean cloth.
=== Weekly ===
* Clean all exterior surfaces with a mild cleaner.
* Examine the water table's level and, if necessary, add water / rust inhibitor (GreenCut).
* Check your plasma torch consumables for wear and replace if needed.
=== Monthly ===
* Clean the electrical cabinet vents of dust with a clean cloth or compressed air.
* Remove the slats and clean sediment buildup from the bottom of the water table.
=== Semi-Annually ===
* Check drive belts for wear and re-tension if needed.
* Remove faceplate from torch lifter and clean lead screw with a lint-free cloth.

== Status ==
1/3/23: Working great, getting ready for authorizations

12/9/22: Waiting on power for the plasma torch.