Latest revision as of 20:36, 7 January 2019

Tube Bending Class

2019 Update: This class is NOT being regularly scheduled.

When: 1st Sunday of the Month, provisional, but not confirmed without an instructor

Where: Hot Metals

Instructor: TBD

Minimum Class size: 5

Maximum Class size: 10

10 feet of 1" 0.065" wall tubing, you can pick this up from metal supermarkets in Niles for around $15. If you find a buddy and have a way of transporting a 20' section you could save on the cutting fee.
1" Milwaukee bi-metal hole saw http://www.homedepot.com/p/Milwaukee-1-in-Hole-Dozer-Hole-Saw-49-56-9609/202327744
Roll of 1.5" PET masking tape https://www.amazon.com/Inch-Temperature-Polyester-Green-Masking/dp/B00VUDSH0Q/
Have completed cold metals tier 1 authorisation
Be authorised on bench and angle grinders
Be authorised on a welder

At the end of the class you will be authorised to use:

@@ Line 1: / Line 1: @@
 = Tube Bending Class =
+Update: This class is NOT being regularly scheduled.
-When: 1st Sunday of the Month
+When: 1st Sunday of the Month, provisional, but not confirmed without an instructor
 Where: Hot Metals
-Instructor: Tom Judge
+Instructor: TBD
 Minimum Class size: 5
-Maximum Class size: 10
+Maximum Class size: 10
 == Required items ==
@@ Line 34: / Line 36: @@
 At the end of the class you will be authorised to use:
+* [[Pro32_Bender]]
-* Pro32 Bender
+* [[Hulk_Tube_Roller]]
-* Hulk Bender
-* Beast Notcher
+* [[Beast Notcher]]
-* Bend protractors
+* [[Bend protractors]]