Jellybox: Difference between revisions
No edit summary |
|||
| Line 22: | Line 22: | ||
How to unclog the hot end (extruder/nozzle): https://forum.imade3d.com/t/howto-unclog-a-clogged-nozzle-hotend/499 |
How to unclog the hot end (extruder/nozzle): https://forum.imade3d.com/t/howto-unclog-a-clogged-nozzle-hotend/499 |
||
Refer to our [[3D Print Troubleshooting]] page. |
|||
Revision as of 23:36, 17 October 2018
Needs an equipment label.
Needs some information! Needs a photo. Needs some categories added.
Status
Functional
Authorization
Has been made available without authorization required, at least that's the impression given and the de facto condition. Might be cleared up by the addition of an equipment label by anyone who knows.
Description
Excellent self-leveling 1.75 mm 3D printer. Uses only SD cards for input, at the moment. There are very good profiles available for this printer in Cura, the default Jellybox profile works quite well.
Usage notes
Sensitive to hygroscopic filament (water absorption), like all printers, but notably. Keep the filament dry, store it carefully. Works well with PLA filament. Works well with blue tape on the build plate.
Troubleshooting and Maintenance
How to unclog the hot end (extruder/nozzle): https://forum.imade3d.com/t/howto-unclog-a-clogged-nozzle-hotend/499
Refer to our 3D Print Troubleshooting page.
